Used Haas Vf 0 for sale (232)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 9,218 h, functionality: fully functional, machine/vehicle number: 10842, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, table width: 457 mm, table length: 1,320 mm, table load: 1,500 kg, overall weight: 5,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, The machine was only used in single-shift operation in a special machine construction facility. No contract manufacturing was performed. The machine is being sold because the special machine construction facility is being shut down. The machine can be inspected while powered on. It is fully functional, and the documentation is available. This 3-axis HAAS FV-4 machine was manufactured in 1997. It has a travel distance of 1,270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine operates with a spindle speed of approximately 8,000 RPM and has the following operating hours: • Total operating time: 9218 h • Cycle time: 4584 • Voltage: 360–480 V Gedps Aiun Rsfx Agroui • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 20 A

Condition: like new (used), Year of construction: 2024, operating hours: 660 h, functionality: fully functional, overall weight: 8,255 kg, HAAS VF-6SS Vertical Machining Center – 2024 2024 HAAS VF-6SS Vertical Machining Center in excellent condition, purchased new in 2024 and with very low operating hours. Godpfx Agezrhrcersui The machine has been used only for a specific production project and remains in outstanding mechanical and cosmetic condition. Equipment HAAS HRT310 Rotary Table (4th Axis) HTS9 Tailstock WIPS – Wireless Intuitive Probing System Through Spindle Coolant (21 bar) Through Tool Air Blast (TAB) High Speed Machining (HSM) 12,000 rpm Direct Drive Spindle 22.4 kW Spindle Motor Haas Next Generation Control Ethernet & USB Automatic Lubrication The machine can be inspected under power in Portugal. Immediately available.

Condition: used, Year of construction: 2008, operating hours: 3,096 h, functionality: fully functional, machine/vehicle number: 1069140, overall weight: 4,500 kg, spindle motor power: 14,900 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, HAAS VF-4BHE Vertical CNC Machining Center – 2008 Guodpj Afypkefx Agroi We offer for sale a used HAAS VF-4BHE vertical CNC machining center, manufactured in 2008. Since its purchase, the machine has been used by a single group of companies, operating on one shift and primarily employed for machining aluminum. The machining center is in full working order, has no history of accidents, and is maintained in good operational condition. Technical specifications and equipment: - Manufacturer: HAAS - Model: VF-4BHE - Year of manufacture: 2008 - Type: Vertical CNC machining center - Technical condition: fully operational - Servo drive operating time: 3,096 h - Motion time: 594 h - Spindle operating time: 656 h - Tool measurement: Renishaw tool sensor - Part probing: not available - Control software version: M16.10A Terms of sale: The seller does not provide machine loading services – the organization of loading and transportation is the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder Gusdpfx Aszlxnhogroi 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table width: 584 mm, table length: 1,321 mm, table load: 1,815 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details. • X-axis rapid traverse: 18.0 m/min • Y-axis rapid traverse: 18.0 m/min • Z-axis rapid traverse: 18.0 m/min • Distance spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Max spindle torque: 122.0 Nm @ 2000 rpm • Table T-slot width: 14 mm • Table T-slot pitch: 80 mm Additional equipment • Included documentation: Manuals and CE Declaration of Conformity Guodpfxjz Erwto Agrji Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231715, For sale is a CNC vertical machining center from the renowned American manufacturer HAAS Automation, model VF-2SS, manufactured in 2010. Manufacturer: HAAS Automation Model: VF-2SS Super Speed Machine type: CNC vertical machining center Year of manufacture: 2010 Control: HAAS CNC control Number of axes: 3, 4th axis, and 5th axis via HAAS rotary table Machine condition: very good Operating hours: approx. 10,900 Technical data Working area / Travel distances X-axis: 762 mm Y-axis: 406 mm Z-axis: 508 mm Main spindle Maximum spindle speed: 12,000 rpm Maximum spindle power: approx. 22.4 kW / 30 HP Spindle drive: Inline direct drive Tool holder: SK40 Work table Table dimensions: 914 × 356 mm Maximum table load: approx. 680 kg Number of T-slots: 3 T-slot width: approx. 16 mm T-slot spacing: 125 mm Feed and rapid traverse rates Rapid traverse, X-axis: up to 35.6 m/min Rapid traverse, Y-axis: up to 35.6 m/min Rapid traverse, Z-axis: up to 35.6 m/min Tool changer Automatic, side-mounted tool changer Tool magazine: 24 tool positions Tool holder: 40 taper Coolant system Integrated coolant system 4th/5th axis via HAAS rotary table (see pictures) Measuring probe system Programmable coolant nozzle Machine weight: 3,600 kg Gusdpfxe Ah Rucj Agroi The machine can be inspected in operation by appointment. Subject to changes, errors and prior sale!

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,575 × 584 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. - Table Dimensions: 1,575 × 584 mm- Maximum Table Load: 1,814 kg- Spindle Taper: CT 50 / BT 50- Tool Changer Capacity: 30+1 pockets- Rapid Traverse (X/Y/Z): 18 m/min- Coolant Tank Capacity: 360 L- Machine Weight: approx. 7,371 kg- Transport Dimensions (L × W × H): approx. 4,270 × 2,600 × 3,180 mm- Supply Voltage: 440 V - Phase: 3-Phase - Frequency: 50/60 Hz- Full Load Current: 55 A- Maximum Load Current: 50 A- Wiring Diagram Number: 96 / 0284- CE Marked: Yes Gjdo Ahxvaopfx Agreui

Condition: used, Year of construction: 2006, type of input current: three-phase, Equipment: chip conveyor, We offer a used Haas VF-2BHE vertical machining center, manufactured in 2006. Manufacturer: Haas Model: VF-2BHE Machine type: Vertical machining center Serial number: 49679 Date of manufacture: 06/06 Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full-load current: 20 A Largest load: 35 A Short-circuit interrupting capacity: 10000 A Wiring diagram: 96 / 8100 Enclosure rating: NEMA Type 1 If you have any questions or need more information, feel free to send us a message or give us a call. Gedpfx Ao Agcv Sogrsui

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50 XTHE was manufactured in 2010. It features an impressive X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,575 × 584 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50 XTHE vertical machining centre we have for sale. Contact us for further details. Guedpfx Ao Ahxywegrji - Supply Voltage: 360–480 V - Power Supply: 3-Phase - Mains Frequency: 50/60 Hz - Full Load Current: 40 A - Largest Load Current: 70 A - Circuit Diagram: 96 - Circuit Diagram Number: 0284 - Table Dimensions: 1,575 × 584 mm - Maximum Table Load: 1,814 kg - Tool Taper: SK 50 / BT 50 (depending on configuration) - Tool Changer: 30+1 tool stations - Rapid Feed Rate X/Y/Z: 18 m/min - Machine Weight: approx. 7,371 kg - Transport Dimensions (L × W × H): approx. 4,270 × 2,600 × 3,180 mm

Condition: good (used), Year of construction: 2012, Haas VF-2SSYT Year of manufacture: 2012 Spindle speed: 12,000 RPM CT40 taper Gedoz Ihc Rspfx Agroui Tool Set Carousel (TSC) Workpiece Probe System (WPS) Renishaw probing system 4th axis, wired Video available!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,126 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS VF-2 YT was manufactured in 2008. It features a spindle speed of up to 10,000 RPM and an impressive X-axis travel of approximately 762 mm, Y-axis travel of approximately 508 mm, and Z-axis travel of approximately 508 mm. The table dimensions are approximately 914 x 457 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2 YT vertical machining centre we have for sale. Contact us for further details. - Spindle Taper: Steep Taper 40 (SK 40 / BT 40) - Cooling System: Through-Spindle Coolant (TSC / IKZ) with filter unit - Table Size: Approx. 914 x 457 mm - Control: Haas CNC with electronic handwheel (Remote Jog) - Operating Hours (Power-On): Approx. 1,126 h - Operating Hours (Program Run): Approx. 352 h - Operating Hours (Cutting Time): Approx. 254 h - Electrical Connection: 360–480 V, 3-Phase, 50/60 Hz - Full Load Current: 20 A (Max. 35 A) Gedpfx As Ai E Ngogreui Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2017, HAAS VF-3SS vertical machining center Year: 2017 Technical details: X-axis travel 1016 mm, Y-axis travel 508 mm, Z-axis travel 635 mm, Table size of 1219 x 457 mm, Spindle 12000 rpm Gujdpfs Af Ncwsx Agroi ATC 24 positions Spindle type SK40 Accessories/options: Renishaw touch probe Renishaw TS27 tool measuring Swarf conveyor Through spindle coolant Software options Under power ihnspection is available at anytime!

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-2SS | 4th axis | Through-spindle coolant | 2014 Vertical CNC Machining Center HAAS VF-2SS, manufactured in 2014. Machine equipped with a 4th axis and through-spindle coolant (TSC). Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Max. table load: approx. 680 kg Spindle speed: 12,000 rpm Spindle taper: CT/BT 40* Spindle drive: direct drive Tool changer: 24+1 positions* Rapid traverse X/Y/Z: up to 35.6 m/min Godpfoz Dh Edox Agrsui CNC control: HAAS Through-spindle coolant (TSC) 4th axis included Tool holders: not included Year of manufacture: 2014 Operating hours: not available Previous operation: 2–3 shifts Equipment: 4th axis Through-spindle coolant High-speed Super Speed (SS) version Automatic tool changer Coolant system Machine inspection can be arranged by prior agreement.

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE . Godpfx Aez Ehxyjgreui

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 240 mm, turning diameter: 200 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 11,200 W, rotational speed (max.): 6,000 rpm, total height: 1,800 mm, total length: 2,500 mm, total width: 1,700 mm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, type of input current: three-phase, overall weight: 3,000 kg, spindle nose: A2-5, Equipment: USB port, rotational speed infinitely variable, For sale: HAAS ST-10 CNC lathe. Year 2014. 160 BISON chuck, 45mm bar capacity, VDI40 turret, manual tailstock (as shown in the picture), tool probe. Rigid tapping capability. The machine is in very good technical condition, precise, and repeatable. A sleeve is included for the spindle, allowing for the installation of a stop. Included in the set: Standard hard jaws (DKT) Hard jaws for small diameters (DKT) 4 sets of soft jaws (DKT) Approximately 25 sets of soft jaws 25 sets of jaw inserts with screws Gedpfx Age Akfflersui For interested parties: For an additional fee: 160 chuck - 3-jaw, pivoting SMW AUTOBLOK for forgings and castings - jaws with carbide inserts for 2 inches - price to be negotiated. The machine is in continuous operation and will be sold without the VDI tool holders visible in the pictures.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) Gedpfszh Hlaox Agreui • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Gujdpfx Age Acmlyorei Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. The machine is powered and ready for inspection. Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) RJH type: C Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Gjdez R Rf Aepfx Agroui Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, HAAS VF-3BHE vertical machining center, 5-axis Year of manufacture: 2007 Specifications: Axis travel: X-1016mm, Y-508mm, Z-635mm Table: 1219 mm x 457mm Table load: 1814 kg Spindle taper: SK40 Spindle speed: 10000 rpm Distance from spindle nose to machine table: 107 - 742 mm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer capacity: 40 positions Weight: 6500 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Accessories/options: - 4/5 axis, TR210 rotary/tilting table Guodpj Ahn N Uefx Agroi - Renishaw OMP40 touch probe - Renishaw TS27 tool measuring unit - Swarf conveyor - Programmable coolant nozzle - Automatic door opening closing PLC possibility - Tool holders with tools, 17 pieces - Coolant tank Run time: 12233 hours Tool changes: 208476 Under power in our warehouse, possible to test it anytime!

Condition: used, Year of construction: 2015, functionality: fully functional, Počet os: 3 Pojezd osy X: 1270 mm Pojezd osy Y: 508 mm Gujdpfj Ad Iabjx Agroi Pojezd osy Z: 635 mm Technická specifikace Výkon vřetena: 22.4 kW Rychlost vřetena: 12000 RPM

Condition: like new (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, Control: HAAS Table size: Ø 400 mm Max. table load: 227 kg X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm B-axis: +120° to -35° Guedpfxj Ai E E Dj Agrei C-axis (Rotation): 360° Spindle taper: SK 40 / Inline direct drive Spindle speed: 10,000 rpm Drive power: 22.4 kW Tool capacity: 30+1 tools Tool holder type: SK40 Machine weight: approx. 5150 kg Dimensions (W x D x H): approx. 2950 x 3000 x 2700 mm Accessories, Equipment • Coolant system • Chip conveyor • Through-spindle coolant (TSC), 20 bar • RENISHAW OMP60 optical part-setting probe • RENISHAW TS27 tool setter • Documentation The machine is in near-mint condition and has barely been used. Under power in Hungary. Would you like me to adapt this translation into a professional sales listing format or modify any specific industry terms for an online machinery marketplace? Az AI-válaszokban előfordulhatnak hibák. További információ

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1112519, MACHINE SPECIFICATION Table size 914mm x 356mm X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102 -610mm Spindle BT 40 Spindle speeds 0-12000rpm Spindle motor 22.44kW Rapid feed rate 35.6m/min Toolchanger capacity 24 + 1 tools Approximate weight 3800Kg MACHINE EQUIPPED WITH: - Haas CNC control Wireless intuitive probing system Swarf auger Gsdpfx Aj Ahw Rzegrjui Coolant system Lighting Guarding

Condition: good (used), Year of construction: 2015, Control: Haas Travel range X/Y/Z-axis mm: 762 / 508 / 508 mm 2-axis rotary/tilting table: 630 x 500 mm Table load capacity: 300 kg A-axis: +110 to -35° B-axis: 360,000° SK 40 spindle Tool changer: 40+1 positions Wireless probing system Synchronized thread drilling Coolant tank (284 liters) Special equipment • Spindle: 12,000 rpm • Internal coolant through spindle, 21 bar • Hinged belt chip conveyor • Programmable coolant nozzle • Ethernet interface Inspection possible while powered on. Gedpe Ai Hbgsfx Agrjui Accessories shown in the picture may not be included in the scope of delivery. Only accessories that have been confirmed in writing by us will be included.

Condition: used, HAAS VF-2SS is a Vertical machining center engineered for precision, high accuracy and reliable production performance. Table 914×356 mm with 3 T-slots (16 mm), travels X762 × Y406 × Z508 mm, table load max 680 kg; 24-position tool changer, tool Ø max 64 mm (127 mm with free adjacent pockets), tool length 279 mm, max tool weight 5.4 kg. Spindle nose BT40, up to 12,000 rpm; spindle motor 22.4 kW; work feed 21.2 m/min, rapid traverse 35.6 m/min; tool change 1.8 s, average chip-to-chip 2.4 s. Voltage 3x 400 V 50 Hz, air 5.5 bar; machine weight ≈3800 kg, dimensions 3150×2600×2700 mm. Accessories: 4th-axis table (B), set of toolholders, set of collets, coolant system 208 l, 3D measuring feeler REGO‑FIX. Suitable for achieving tight tolerances in automotive, aerospace, medical, watchmaking and machine tool sectors. Gujdpfxe Ai Sbio Agroi

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1600058, total height: 300 mm, total width: 670 mm, total length: 890 mm, rotary table diameter: 600 mm, table diameter: 600 mm, compressed air connection: 8 bar, Haas HRT600 CNC rotary table / 4th axis / Ø 600 mm Haas HRT600 CNC rotary table (4th axis) for sale. This rotary table comes from a Haas VF-6B/40HE and was used as a 4th axis. The table is equipped with a servo drive and was tested on the machine again before removal. The axis could be moved and rotated flawlessly via the control. The rotary table has a diameter of approximately 600 mm. Serial number of the rotary table: 1600058. Gsdpfx Ajzzbitogreui Condition Rotary table rotates and moves via the Haas control. Functionality tested before removal. No detailed geometric measurement performed. Angular accuracy, runout, and repeatability were not checked with a dial indicator. Sale due to non-use. Technical data Manufacturer: Haas Automation Model: HRT600 Type: CNC rotary table / 4th axis Table diameter: 600 mm Serial number: 1600058 Year of manufacture probably 2004/2005 (matching the original machine)