Used Haas St 20 Y for sale (240)

Condition: excellent (used), Year of construction: 2018, For sale Fourth axle from Haas HRT310 with 15 operating hours Year of construction 2018 Clamping surface diameter 310 mm Max. Weight on the clamping surface (with support) 197.3 kg Maximum weight on the clamping surface (unsupported) 98.7 kg Number of T-slots in basic configuration 6 x 60° Max. Max. speed 75 °/sec Torque (continuous) 407 Nm Weight 232 kg The dividing head can be inspected by arrangement in Upper Austria. The buyer takes care of transportation. Technical data, accessories and description of the machine are non-binding Dodpfx Aju Haxlob Tecr

Condition: excellent (used), Year of construction: 2020, Two machines of the same type with automation (linked) HAAS control system Travel paths X/Y/Z: 711 / 406 / 394 mm Spindle speed 12,000 rpm Tool magazine for 20 tools, BT 30 4th axis HRT 210 with counter bearing Spiral conveyor Schusta automation with YASKAWA robot Dcodpfx Absv Iypce Tjr

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Dcedpjv Tah Ajfx Ab Ter Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 13378, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 500 m/min, rapid traverse Y-axis: 400 m/min, rapid traverse Z-axis: 400 m/min, spindle speed (max.): 7,500 rpm, Working machine. Being Used every Day Dsdpfxjxlikas Ab Tjcr

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, HAAS CNC control / 4th axis drive and wiring / 15" color LCD screen High-speed 24-position side-mount tool changer reducing cycle times and increasing work envelope Rigid tapping / The machine comes with a 5C 4th axis. USB port / 4th axis interface / Haas HA5C indexer / Rigid tapping Spindle orientation / High-flow coolant pump / Green operation indicator light Full enclosure / HaasConnect - remote monitoring / Ethernet interface Air blast on viewing window / High-flow coolant pump kit (150 L) / Chip auger Dedpfex A Tttox Ab Tjcr

Condition: good (used), Year of construction: 2015, 1 used portal machining center Manufacturer: Haas Model: Gr 510 Year of manufacture: 2015 Technical details X-axis: 3073 mm Y-axis: 1549 mm Z-axis: 279 mm Control: HAAS Table size: 3099 x 1346 mm Total power requirement: 11.2 kW Machine weight approx.: 9.2 t Dodpfxsxzifvj Ab Tjcr Shipping dimensions: 5.5 x 2.9 x 2.9 (3.2) m Space requirements approx.: 6 x 3 x 3 m Additional information 4th axis NC rotary table with tailstock and swiveling bridge

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1203753, SPECIFICATION Table size 914mm x 457mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate 35.6m/min Toolchanger capacity 30 + 1 tools Approximate machine weight 3810kg MACHINE EQUIPPED WITH: - Haas CNC control Wireless intuitive probing system Through spindle coolant Auxillary filter Wireless intuitive probing system High speed machining User definable macros Visual programming system Dynamic work offsets Coordinate rotation and scaling 4th axis interface (interface only. no 4th axis) 22 off BT40 toolholders Swarf auger Programmable coolant nozzle Lighting Dcjdpfx Aox A Dxgeb Tjr Guarding NB current basic list price new in excess of £78,000.00, this machine has over £38,000.00 of options fitted.

Condition: excellent (used), Manufacturer: Haas Model: VM-6HE Serial number (SN): 1067464 Axes: 3-axis CNC machining center Spindle mount: SK40 Axis travels (X/Y/Z): 1,625 × 812 × 764 mm Dcjdpfxoxywiye Ab Ter Table: clamping table Equipment: • Chip conveyor • Automatic tool changer (ATC) • Tool magazine: 24 positions

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Dodpsxwyuaefx Ab Tscr Spindle Motor 30Hp HAAS Control, 24 Station ATC, Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1056789, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 18 m/min, workpiece weight (max.): 1,500 kg, total height: 3,600 mm, total length: 2,400 mm, total width: 2,600 mm, table width: 457 mm, table length: 1,219 mm, table load: 1,500 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, type of input current: three-phase, coolant supply through spindle: 20 bar, tool type: SK 40, Equipment: chip conveyor, documentation/manual, lighting, This CNC machine is a Haas VF3(BHE) from 2007. It features a side-mount tool changer and a double-arm gripper, enabling automatic tool changes from 24+1 tools. Both the tool changer and spindle accept SK40 tool holders. A wired handwheel is located on the left side of the control panel. The 4th axis is pre-configured. The front and side safety viewing windows have been replaced. The coolant has been drained, and the tank has been cleaned. An additional 25-micron coolant filter protects the spindle's internal coolant system via the tool against contaminants and chips. Training materials and a manual are included, as well as a cable for communication with a computer (see photos). The machine is powered on and can be inspected and demonstrated by appointment at any time. We are happy to answer any further questions you may have about the CNC machine. Djdpfxsx Aidhj Ab Tecr Organizing transport at the buyer’s expense is possible by arrangement. Sale on behalf of a customer!

Year of construction: 2004, condition: excellent (used), Drive power: 250 kW Rotor length: 1600 mm Rotor diameter: 1200 mm Feed opening: 1500 x 750 mm / 1500 x 600 mm Wear parts new, main motor with new bearings. Chassis, hydraulic unit, Dcsdpfouqyr Ejx Ab Tjr complete with control cabinet and operator panel, Excellent condition, ready for operation Total weight approx. 18 t

Condition: good (used), Year of construction: 2016, 1 used 5-axis machining center Manufacturer: Haas, Model: UMC-750, Year of manufacture: 01/2016, Read spindle hours: 4,960, Feed hours: 10,247 Dcjdpfexyinnex Ab Tsr Travel X/Y/Z = 762x508x508 mm, 10,000/5,000 Bh Tool holder: SK40, 40-position tool changer, NC SRT table size: 630x500 mm, Maximum table load: 300 kg, Maximum swing diameter: 686 mm,

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1188877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Dodex Afpgopfx Ab Tscr Machine Equipped with Haas CNC Control HRT 160 4th axis 11 off BT40 toolholders High flow coolant system Lighting Enclosed guarding Manual

Condition: excellent (used), Manufacturer: Haas Serial number: 1059169 Spindle taper: SK40 Axis travels (X/Y/Z): 1,016 × 660 × 635 mm Additional equipment: chip conveyor clamping table automatic tool changer (ATC) tool magazine: 24 positions Dodpfx Aoxywh Aeb Tocr

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, Dcedpfx Abskticxe Ter table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min Dcodpfx Aexyafwsb Tor weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, HAAS VF-2 is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 914×356 mm; travels X 750 mm, Y 406 mm, Z 508 mm; table load max. 680 kg. Tool changer 20 tools, spindle nose CT40, stepless spindle up to 8100 rpm, spindle power 22.4 kW, rapid traverse 25.4 m/min; machine weight approx. 3447 kg; overall dims L2464×W2337×H2578 mm. Accessories: set of toolholders, preparation for coolant device, Renishaw probe, lamp, oil mist extractor, rinsing guns. Enables tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, toolmaking. Djdpfx Abexx U Dlo Tscr

Condition: used, Year of construction: 2010, functionality: limited functionality, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: MOCON 17.28, table width: 1,626 mm, table length: 710 mm, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, Vertical 3-axis machining center Haas VF6 / 50 HE Linear guideway machine with up to 610 Nm torque (at 500 rpm) Travel paths: X 1626 mm Y 813 mm Z 762 mm Linear position measurement system 2-speed gear spindle SK50 with 7,500 RPM and 22.4 kW Automatic tool changer with 30 +1 positions Internal coolant supply with 1000 psi (approx. 70 bar) Coolant tank 360 liters Spiral chip conveyor Includes: Oil mist extraction unit Ethernet interface RENISHAW wireless tool measurement system Additional loading fixture for inserting tools into the machine Macro programming enabled. Dedew Rbx Uepfx Ab Tjcr The machine is only partially functional.

Condition: used, Year of construction: 2007, Haas TM 2 TRAVELS X 1016MM Y 406 MM Dcedpfsxp Hx Nox Ab Tjr Z 406MM

Condition: new, functionality: fully functional, For sale: The Haas automatic coolant refill system monitors the coolant level in the machine and automatically adds new coolant to the tank at the correct mixing ratio. 2 units available. When purchasing both coolant refill systems together: Only €800 each! All technical details can be found on the Haas website: 3w.haascnc.com/de/productivity/chip-and-coolant-management/coola nt-refill.html Dsdpsxzr S Eofx Ab Tscr

Condition: good (used), Year of construction: 2012, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table Dedpfxoxpw Rvs Ab Tscr

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1126346, travel distance X-axis: 768 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas Classic Control, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,300 h, coolant supply: 20 bar, spindle motor power: 22,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine has operated in single-shift mode and is available immediately. The machine roof is included. The extraction system can be purchased separately. Dodpfx Aboxy Ac Ee Tocr

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filter devices Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Dcodpsciz Iyefx Ab Tor Nd:Yag laser with Hurryscan 10 - Galvo head from Scanlab Fuchs extraction and filter devices TKFD The integrated pre-separator ensures the high filter capacity Different filter levels are possible and can be perfectly customized Ideal for confined spaces - can be placed under a table or integrated into machines Welding fume separation class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Specifications: X-Axis Travel: 762 mm (30 inches) – Longitudinal table movement Y-Axis Travel: 406 mm (16 inches) – Transverse table movement Z-Axis Travel: 508 mm (20 inches) – Vertical spindle movement Table Size (W x L): 356 × 914 mm (14 x 36 inches) Max. Table Load: 680 kg Control: HAAS CNC Control Parameter Value Note Max. Spindle Speed: 12,000 rpm (Standard for SS model) Spindle Power: 22.4 kW (30 HP) – High-power motor for rapid material removal Djdpfx Asxyag Ijb Tjcr Spindle Taper: CT40 or BT40 Drive System: In-line Direct-Drive (Direct coupling minimizes vibrations and thermal expansion) Parameter Value Machine Weight: Approx. 3,600 kg Dimensions (L x W x H): Approx. 3,099 × 2,261 × 2,743 mm

Condition: excellent (used), Year of construction: 2014, Traverses X Y Z: 1016 x 660 x 635mm, Spindle nose to Table: 102 – 737mm, Table 1372 x 635mm, Dsdpfop H Tb Njx Ab Tscr Spindle speed 12000rpm, Spindle Taper ISO40, Spindle Motor 22.4kW, HAAS Control with High Speed Machining, 24 Station ATC, Programmable Coolant nozzle, Low Volt light, Swarf auger, Renishaw Tool Setter & Probe