Used Gutter for sale (66)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902035352, empty load weight: 6,460 kg, maximum load weight: 32,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 40,000 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, color: original, Note: The images shown are archive photos. The vehicle may still be in operation. Additional Information Chassis – Curtainsider Semi-Trailer Lightweight high-tensile steel welded chassis with replaceable 2" kingpin Itedpfx Ajzl D Rzsh Esl Rail-road (Huckepack) version for combined road/rail transport Huckepack load securing code XL with 4 crane gripping edges Overall height max. 4,000 mm with air suspension deflated for pocket wagon transport (880 mm support height), rail code P400 Curtain with integrated crane edge protection according to DB requirements PRO SLIDE front guide plates on both sides of the kingpin Heavy Push Frame reinforced outer frame for intensive side loading 1 pair of rear landing legs with straight foot and single-side operation (right-hand side) 4 pairs of ferry lashing rings, yellow marked Heavy-duty pallet stop on both sides, fully bolted Storage compartment for 32 side boards (16 per side) beneath the loading platform Document box (360 × 260 × 40 mm) Axles & Suspension SAF disc brake axles for combined transport with anti-sag wire rope protection (or equivalent design) Laser-aligned axles and suspension for reduced tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded air lines for easy servicing Spring parking brake 2 interchangeable-proof air couplings plus C & CA-type air connections (UK) EBS electronic braking system with front EBS socket Raise/lower valve Electronic Stability Program (ESP) Brake pad wear indication via Trailer Info Center, including axle load, mileage and diagnostic/system information Tyre pressure monitoring system (TPMS) via EBS Wheels & Tyres 445/45 R19.5 Continental tyres Steel wheels, factory silver Wheel nut protection caps Electrical System 24 V lighting system 4 × three-chamber rear lights Round reversing light and rear fog light 2 red/white rear marker lights 2 × 7-pin and 1 × 15-pin front sockets 2 additional LED work lights at the rear Floor Approx. 30 mm plywood floor on longitudinal cross-members Forklift axle load capacity up to 7,100 kg Premium sealed floor with perimeter joint sealing Side Posts 3 pairs of sliding posts, fully adjustable 3 post positions Side Boards 5 rows of aluminium V-type side boards Curtain Reinforced curtain with welded horizontal and vertical straps 3 document pockets per side Stainless steel buckles Roof Sliding roof with rear end lift Roof slides from rear to front L-shaped roof beams for automotive loading Internal roof width approx. 2,490 mm White roof curtain Five-point roof bow securing system with additional roof safety hooks on every second roof bow Non-elastic roof design with minimal roof beam deflection during loading/unloading Optimised rear rain gutter above the doors EcoLift lifting roof, raises approx. 380 mm on both sides with gas strut assistance

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902034305, empty load weight: 5,875 kg, maximum load weight: 33,125 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Archive photos shown. Vehicle may still be in operation. Fliegl Rail-Transport Curtainsider Semi-Trailer (Huckepack) High-strength fine-grain steel welded chassis with replaceable 2" kingpin. Rail-compatible Huckepack design for combined road/rail transport. EN 13044 railway coding with ILU code. XL rail load securing package for transport speeds up to 140 km/h, including 4 colour-marked crane grab areas, integrated grab protection in the curtain, roof markings for crane positioning, max. overall height 4,000 mm with air suspension lowered for pocket wagons. Foldable side and rear underrun protection, aluminium side guards, rear ladder, D-Lock door retainers, Heavy Blocker 2.0 rear impact protection, yellow ferry lashing rings and pallet stops on both sides. Axles & Suspension: SAF 430 mm disc brake axles for combined transport with anti-drop cable protection, air suspension, automatic lift axle with forced lowering and traction aid (activated by braking three times). Itedpfxozlrqcs Ah Eel Braking System: Dual-line air brake system with colour-coded air lines, spring parking brake, EBS with front socket, raise/lower valve with auto-reset function. Tyres: 385/65 R22.5 tyres (manufacturer's choice), steel wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets, rear LED work light. Floor: Approx. 30 mm plywood floor on 8 longitudinal cross-members, forklift axle load up to 7,900 kg, premium sealed floor. Front Wall: 2,580 mm steel bulkhead with EN 12642 XL strength (0.8 × payload), Crash-Blocker and internal steel impact protection. Rear: Steel rear corner posts, EN 12642 XL rear portal (0.5 × payload), Fliegl I-Lock integrated door locking system (iF Design Award), lifetime warranty on frame-mounted locking components. Curtain: Reinforced curtain with welded horizontal and vertical straps, side curtain strength 0.4 × payload. Roof: Fliegl Blitz sliding roof with rear end lift, automotive L-roof beams, five-point roof fastening, additional roof safety hooks, non-elastic roof with minimal deflection, integrated rear rain gutter. Approval: Germany, EC type approval (2007/46), Fliegl EN 12642 XL, DL 9.5 and VDI 2700 Sheet 12 load securing certificates.

Condition: used, machine/vehicle number: WFDFLT33802021791, empty load weight: 6,433 kg, maximum load weight: 28,567 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", color: black, Please note: The images shown are archive photos. The vehicle may still be in operation. ## Fliegl Mega Curtainsider Semi-Trailer Chassis: Lightweight fine-grain steel chassis, replaceable 2" kingpin, Load-Lock outer frame, 24 t JOST two-speed landing gear, rear access ladder, door retainers, aluminium side underrun protection, galvanised rear underrun protection, quarter mudguards, anti-spray mud flaps, Heavy Blocker rear impact protection with side roller buffers, heavy-duty pallet stop, spare wheel carrier, lockable toolbox with drawer, document box. Axles & Suspension: BPW drum brake axles (8-stud hubs), laser wheel alignment, mechanical hubodometer, air suspension, automatic lift axle with forced lowering and traction aid (activated by brake pedal or manual switch). Brakes: Dual-line air brake system, spring parking brake, WABCO EBS, lift/lowering valve. Raising the lift axle increases loading/overall height by approx. 50 mm. Tyres: 445/45 R19.5 (manufacturer's choice). Ijdpfx Ahezlciij Ejtl Electrical: 24 V LED lighting, LED side markers, LED front position lights, LED rear outline lights, 2 × 7-pin and 1 × 15-pin front sockets. Floor: Approx. 30 mm plywood floor with Omega-reinforced joints, suitable for forklift axle loads up to 7,100 kg. Front Wall: 2,580 mm high, steel corner posts, curtain release system, internal steel impact protection, additional 1,250 mm plywood lining. Centre Posts: 3 pairs of full-length sliding posts with multiple locking positions. Side Slats: Aluminium or timber V-slats. Rear: Steel rear corner posts, double rear doors with internal locking bars, curtain tensioning system. Curtains: Reinforced curtains with welded horizontal and vertical straps, stainless steel buckles. Roof: Sliding roof, rear end lift, automotive L-roof rails, hydraulic lifting roof on both sides (+400 mm), rain gutter at rear. Certification: DEKRA approval, EN 12642 XL load securing certificate, VDI 2700 Sheet 12 beverage transport certification, ECE R70 rear warning plate.

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm Itsdpfx Ahezlcdgj Esl #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Rear night parking sign

Condition: new, Year of construction: 2025, Equipment: sanitary facilities, We offer high-quality sanitary containers from our own production. Our containers are ideal for construction sites, campsites, commercial businesses, events, allotment gardens, and many other applications. The sanitary container offered is one of our most popular models and is often available for immediate delivery from our warehouse. Net price: €3,490.00 Price excluding statutory VAT. Europe-wide transport is possible – we will gladly prepare an individual offer for you including delivery. Technical data Robust steel frame construction 50 mm sandwich panels with polyurethane insulation Exterior cladding made of galvanized steel sheet Interior cladding made of galvanized steel sheet PVC flooring Water, wastewater, and electrical installation Water connection at the rear Wastewater connection at the rear Exterior socket 230 V Natural ventilation Weight approx. 340 kg External dimensions: Height: 2.30 m Width: 2.20 m Depth: 1.20 m Equipment – WC Lockable door WC compact unit Washbasin with single-lever mixer Toilet paper holder Mirror LED ceiling light Socket Ventilation grille (15 × 15 cm) Internal dimensions WC: 108 cm width × 102 cm depth Equipment – Shower Lockable door Shower tray Shower tap with hand shower LED ceiling light Ventilation grille Internal dimensions shower: 102 cm width × 90 cm depth Optional equipment If desired, we can customize the container individually: Urinal instead of the WC WC and urinal in one room Technical room for hot water boiler or cleaning agents Hot water boiler Individual interior layout Further special equipment according to customer requirements Why SDS GROUP? ✔ Direct from the manufacturer ✔ Robust steel construction ✔ High-quality thermal insulation ✔ Industrial manufacturing quality ✔ Individual custom-made products ✔ Construction designed for snow and wind loads ✔ Concealed roof drainage system ✔ High-quality sandwich panels with PU insulation Delivery We organize delivery within Germany and to other European countries. The transport costs depend on the delivery location. Please contact us so that we can prepare an individual transport offer for you. Further models available In addition to this model, we offer numerous other sanitary containers in different sizes and configurations, including: WC containers Shower containers Barrier-free sanitary containers Itodpfx Aoziu H Ioh Eel Office containers Individual container solutions according to customer requirements We will gladly advise you personally and prepare an individual offer. MAIN CONSTRUCTION SYSTEM The modular containers from SDS Containers are designed taking into account the climatic conditions of the destination. SUPPORT SYSTEM The main construction consists of galvanized C and U profiles. The material thicknesses are determined based on static calculations and according to the intended location of use of the container. DRAINAGE SYSTEM The containers have an integrated drainage system with concealed roof gutters in the upper area of the construction. The rainwater is directed to the corners and discharged via specially developed corner supports. We look forward to your inquiry! Further information and our complete product range can be found on our company website or upon request.

Condition: used, Newtec H3013MD 13-Lane Linear Weigher with Elevating Belt – Double PCS (2013) The Newtec H3013MD is a high-capacity 13-lane linear weigher featuring an integrated elevating belt and a Triple PCS (Portion Collection System). This dual collection system enables significantly higher throughput by collecting and discharging two weighed portions simultaneously, making it an excellent solution for high-speed fresh produce packing lines. Designed specifically for products such as potatoes, onions, carrots, tomatoes, citrus fruits and other fresh produce, the H3013MD combines accurate weighing with gentle product handling and exceptional reliability. The hygienic stainless steel construction and proven Newtec technology make it a popular choice for demanding packing operations. Technical Specifications - Manufacturer: Newtec - Model: H3013MD - Type: 13-lane linear weigher with elevating belt - Serial number: 10729 - Year of manufacture: 2013 - Power supply: 400 V - Phase: 3 Ph - Frequency: 50 Hz - Current: 9 A - Number of weighing lanes: 13 - Lane length: 730 mm (13x) - Gutter width: 95 mm (13x) - Weighing basket dimensions: 140 × 95 × 170 mm (13x) Key Features - 13 independent weighing lanes for accurate portioning - Double PCS (Portion Collection System) for increased output and higher packing speeds Itjdszilitspfx Ah Ejl - Integrated elevating belt for continuous and even product feeding - Gentle handling of delicate products - Hygienic stainless steel construction - Easy access for cleaning and maintenance - Suitable for a wide variety of fresh produce applications - Proven Newtec technology known for its reliability and accuracy - Easily integrated into existing packing lines The machine is in good overall condition and is available for inspection. Additional photos, videos or a live demonstration can be provided upon request. Contact us for pricing, availability or additional information. * Manufacturer: Newtec * Model: H3013MD * Serial number: 10729 * Year of manufacture: 2013

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min Itodpfx Asylpzysh Eol milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - Documentation

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Itodpfxjzgua Ae Ah Ejl Inspection and testing are possible and welcome after prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Article number: Bending machine KS & HT.

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. New list price 2024 – see pictures (now more expensive again) €18,490 net, excluding the radius beam. Features of the device: Press brake Schechtl HA Beam bends cleanly – testing possible Degree indicator Bending length slightly over 2m Sheet metal thickness 2 mm steel – sheet – aluminum, zinc, etc., up to approx. 3 mm Beam radius for aluminum, zinc is installed – a sharp beam is also included (see picture)! Optional: depth stop Sheet metal shear HT 200 or sheet metal shear Schröder electric 2m - 2.5mm would be optional. Important! Optionally, you can find and purchase many machines and machine accessories, such as various beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, rounding machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, backstop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice in accordance with §25 a UStG – the value-added tax is included in the invoice amount. Subject to differential taxation. Isdpfxozgt Nvs Ah Estl Free loading is possible – weight approx. 1450 kg. Inspection and testing are possible and welcome after a telephone appointment has been arranged. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Article number: Press brake HA 200

Condition: new, Year of construction: 2025, SANITARY CONTAINER WITH WC + SHOWER LUX Directly from the manufacturer – high-quality design at an attractive price. In many cases, the container is available for immediate delivery from stock. THE NET PRICE IS ONLY 4290 EUROS. Europe-wide transport is possible – we will gladly prepare an individual offer for you including delivery. TECHNICAL DATA • External dimensions: 2.20 m width × 1.20 m depth × 2.30 m height • Weight: approx. 340 kg • Robust steel frame with reinforced design • Wall and roof panels made of 50 mm sandwich panels • PU hard foam insulation • Exterior cladding made of galvanized steel sheet • Interior cladding made of galvanized steel sheet • PVC flooring • Complete water, wastewater, and electrical installation • Water connection on the rear wall • Wastewater connection on the rear wall • External 230V connection • Natural ventilation EQUIPMENT WC CABIN • Lockable door with cylinder lock • WC compact unit • Washbasin with single-lever mixer • Toilet paper holder • Mirror • LED ceiling lighting • Socket • Ventilation grille EQUIPMENT SHOWER CABIN • Lockable door with cylinder lock • Shower tray • Shower fitting with hand shower • Ceiling lighting • Ventilation system OPTIONAL AVAILABLE • Hot water boiler • Electric fan heater • Individual equipment according to customer requirements YOUR ADVANTAGES ✓ Directly from the manufacturer ✓ Robust industrial quality ✓ High-quality thermal insulation ✓ Durable steel construction ✓ Ready for immediate use ✓ Simple installation ✓ Europe-wide delivery possible ✓ Individual adaptations on request ROBUST STEEL CONSTRUCTION The stable steel substructure and the frame system have been developed for long-term and intensive use. PRODUCTION ACCORDING TO INDUSTRIAL STANDARD The manufacturing process takes place with modern production facilities and under strict quality controls. INDIVIDUAL SOLUTIONS Our containers can be individually adapted to the requirements of the respective project and the conditions on site. ROOF SYSTEM Ijdpjzgtdmsfx Ah Ejtl Insulated sandwich panels with PU insulation are used for the roof covering. INSULATION Sandwich panels with PU insulation and mineral wool (rock wool) are used for the walls. SUPPORT SYSTEM The main structure consists of galvanized C and U profiles. The material thicknesses are determined on the basis of static calculations and according to the intended location of the container. MAIN CONSTRUCTION SYSTEM The modular containers from SDS Containers are designed taking into account the climatic conditions of the destination. DRAINAGE SYSTEM The containers have an integrated drainage system with concealed roof gutters in the upper area of the structure. The rainwater is directed to the corners and discharged via specially developed corner supports. We will gladly advise you personally and prepare a non-binding offer for you. Contact us for further information, delivery times and transport costs. TRANSPORT SERVICE We work with several transport companies and can therefore offer cost-effective deliveries throughout Germany and within the European Union. For transport, we use vehicles with a tail lift and a manual pallet truck. This allows us to unload the container at any fixed location that can be reached by the vehicle.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Itjdpfx Ahsi Riwuo Esl Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: good (used), Year of construction: 2013, Hazardous materials container, REI 90 / F 90 fire protection storage type WFP, cantilever racks, internal lighting, loading ramp, leakage sensor – used - : Price ex location: €29,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of manufacture: 2013 Model: BMC-X 600-K-T90-2 Model: REI 90 / F 90 Fire Protection Storage WFP-X 14 Room system surface finish External coating: RAL 9002 grey white Internal coating: RAL 9002 grey white Door coating (both sides): RAL 9002 grey white Dimensions (mm) Internal | External (without attachments) Width: 2,560 | 2,952 Depth: 5,500 | 5,938 Height: 2,500 | 2,924 Sump capacity Steel sump: 1,560 litres Door placement: short side Stainless steel door handle with anti-panic function: 1 pc Technical ventilation fire protection system: 1 pc Exhaust air monitoring: 1 pc Door holding device single-leaf door: 1 pc Loading grate for pallet truck, WFP 14: 1 pc Cantilever racks: 8 pcs Ex-proof internal LED lighting 42 watts: 1 pc Steel loading ramp suitable for pallet truck: 1 pc Surge protection: 1 pc Leakage sensor SpillGuard Connect: 1 pc Emergency exit sign (fluorescent): 1 pc Control unit: 1 pc • Safety storage for water-polluting substances (WGK 1-3) as well as flammable, toxic, and oxidizing substances according to GHS • Roof and sidewalls made of fire-resistant cladding (EI120) with fire protection from both inside and outside. Floor fire protection via suitable substructure on-site • Roof drainage via integrated gutter with internal downpipes at each short side • Manufactured to DIN EN 1090-2 • Flexible indoor or outdoor installation on a concrete surface • Frame structure designed to meet static requirements • Constructive potential equalization by grounding the steel frame structure • Hot-dip galvanized steel sump made from S235JR (material no. 1.0038) to DIN EN 10025, 5 mm material thickness, corrosion protection for at least 5 years • Leak tightness test of the sump according to EN ISO 3452-1 with factory certificate • No ground clearance. Not suitable for underpassing by industrial trucks Iedpfjyzc Dhex Ah Eetl • Front lugs for securing the room system to the concrete base • Corrosivity class C3-M according to DIN EN 12944, part 1 • Single-color 2K PUR coating in RAL color tone • Self-closing fire protection door with overhead door closer and anti-panic lever set, lockable by cylinder lock with Euro profile 17mm • Convenient access thanks to low door threshold of 147 mm • Storage area with hot-dip galvanized, removable grating supports • Demountable transport brackets on the roof section II 2(1) Ex emb[ia] IIC T6) Cantilever racks Internal lighting Loading ramp Leakage sensor SpillGuard Connect Original price: €49,000 Condition: good – very good. No spills; only closed containers were stored inside. Availability: immediately Location: 79312 Emmendingen, Germany Detailed offer data available as PDF on request.

Condition: good (used), For sale: Baking trays with gutters brand: SASA number of pieces in total: 550 baking trays total price: €25,000 dimensions: Length: 200 cm width: 80 cm height: 5 cm gutter width: 9.5 cm number of gutters per plate: 21 gutters The baking trays come from a current Mecatherm Line See also the photos All as good as new and still provided with a Teflon layer and all the plate are stainless steel. Viewing is possible on location If you have any questions, we'd love to hear from you! Kind regards, Leo Holland for sale: baking trays with gutters brand: SASA total number of pieces: 550 baking trays total price: 25,000,- dimensions: Length: 200 cm width: 80 cm height: 5 cm Iodpfjrt Uw Rsx Ah Eetl width gutter: 9.5 cm number of gutters per plate: 21 gutters See also the photos All as good as new and still provided with Teflon layer and all plates are made of stainless steel The baking trays come from a current Mecatherm Line Viewing is possible on location If you have any questions, we would like to hear from you! kind regards, Leo Holland

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 8,685 mm, total width: 2,550 mm, total height: 3,970 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center axle trailer Fine-grained steel welded construction Outer frame slightly angled with "Load-Lock profile" for attaching tie-down straps. Note: To attach the straps, the side panels must be opened! "Vario-Lash" lashing rings for use in the "Load-Lock profile", 2.5 tons each, loose Gear-supported front legs, with a straight lower part and single-sided operation on the right Telescopic rear support Retractable ladder at the rear Door latch on the side Chocks with holder Aluminum side impact protection Steel underrun protection Quarter panel fenders in front of and behind each axle Rear impact protection Plastic toolbox with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Coupling device for center axle trailer, according to customer requirements Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle EBS, electronic braking system with EBS plug at the front, with connection cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle – driving stability system Wheels and tires 385/65 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length approx. 6,900 mm Front bulkhead / corner posts at the front 2,580 mm high, steel corner posts in a full-volume design, release mechanism for side tarpaulin on the front bulkhead Center posts Sliding posts, can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom Insertion slats Rows of aluminum V-insertion slats Rear bulkhead / corner posts at the rear Rear corner posts, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioner Rear portal doors, 2-wing, each with 2 internal rotating bar locks Itsdpfxszcqh Ns Ah Eel Tarpaulin Tarpaulin with welded horizontal and vertical straps Tensioners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Fixed roof with tarpaulin and bows, tarpaulin color: white Optimal rain gutter at the rear, at the top of the end bow, above the doors Registration country / signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Load securing certificate according to EN 12642 XL 24/7 service hotline prepared for license plate holder, single row Reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the corners (if visible side panels, then the strip at the bottom, on the side panels) Reflective strips: red, around the rear portal *also available as a drive-through version Customized transport solution

Condition: used, Year of construction: 2024, operating hours: 435 h, power: 175 kW (237.93 HP), empty load weight: 15,000 kg, Operating hours: 435, First registration: 24.10.2024_____ Two-engine version with JCB 55 kW / Stage 5. Dual-sided dirt pickup, towed. Basic equipment sweeper. Controls: The main control panel is mounted in the center of the cab with a JVM for displaying information on a wide range of sweeper functions, plus download capability for recorded data. Additionally, images from up to four cameras can be displayed on the JVM screen. A separate control console with palm rest for main sweeping functions is mounted on the door side. Suction fan: Variable suction speed from 1,800 rpm to 3,500 rpm, adjustable for different applications. V65t: Higher gear ratio: 1.79:1. Disc brush (gutter brush): Quick-change brush system with variable sweeping speed up to 160 rpm (adjustable from cab). Highly visible signal-yellow brush disc and hose routing. Suction mouth: Aluminum suction mouth with 250 mm inlet diameter and tool-free adjustment. Dust suppression system: Spray heads for dust control located at suction nozzles, disc brushes, and along the vehicle front. "Pressadrain" water reclamation system. EUnited 4-star PM10 certificate. Electrical system: 24 V. All external wiring harness connectors meet IP67 protection standards. External noise / Sound power level: LWA 108 dB(A) for engines with standard power, measured to EC directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured to EC directive 2000/14/EC. Debris container: The superstructure comprises debris container and integrated water tank, made from high-strength Inox steel. Waterproof rear door locking system with safety lock and drainage function. Two side maintenance doors and side storage compartments. A water strainer allows the debris container to be used as a large water tank for street washing. Standard equipment includes rear dump hatch, automatic multi-stage debris container support, two protected rear beacons, and LED work lights. Container volume: 6.5 m³. Tipping angle: 54° (nominal). Door opening angle: 125° (nominal). Water tank: The baffled water tank can be filled by a Type 'A' hydrant. The double-membrane pump is suitable for continuous duty and even dry run operation. Water volume: 1,545 l (optional 2,000 l). Exhaust hood: The smooth-surfaced exhaust hood is lined with frequency-tuned sound insulation. Brush: Roller brush Ø 406 mm. Roller brush width: 1,275 mm. Suction mouth width: 750 mm. Disc brush: 500 mm (opt. Ø 650 mm). Special equipment sweeper: Auxiliary engine: JCB 55 kW turbocharged, low emission to Stage 5, REQUIRES EN590 (or similar) LOW SULPHUR FUELS. Sweeping units configured for right-hand operation. Final assembly on customer-supplied MB Atego 1324. Pneumatic raising and lowering of the air guide sieve in the dirt container. Pneumatic shaker device for air guide sieve. Chain curtain in dirt container ahead of air guide sieve. Water tank connection coupling Type A, Storz 2 1/2 inch. Dirty water drain screen with graduated perforation mounted on rear door enables efficient... Iedpfx Aowxn Uash Estl

Condition: used, Year of construction: 2024, operating hours: 930 h, power: 175 kW (237.93 HP), empty load weight: 16,000 kg, Operating hours: 930, First registration: 23.09.2024 Double-sided dirt collection, towed Basic equipment Controls Main control panel mounted in the center of the cabin with JVM for displaying information on a wide range of sweeper functions plus download capability for recorded data. In addition, the JVM display can show images from up to four cameras. A separate control console with a palm rest for operating main sweeping functions is mounted on the door side. Suction blower Variable suction speed from 1,800 rpm to 3,500 rpm to adapt to different applications. V65t: Higher gear ratio: 1.79:1 Disc brush (gutter brush) Quick-change brush system with variable sweeping speed up to 160 rpm (controllable from the cabin). Highly visible signal yellow brush plate and hose routing. Suction mouth Suction mouth made of cast aluminum with 250 mm diameter at the inlet and tool-free adjustment. Itodpjw Ehx Esfx Ah Ejl Dust suppression system Spray heads for dust control are located at the suction nozzle(s), disc brushes, and along the front of the vehicle. 'Pressadrain' water recycling system. EUnited 4-star certificate according to PM10. Electric system 24 V All external wiring harness connections comply with IP67 protection rating. External noise/sound power level LWA 108 dB(A) for standard power engines, measured according to EC directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured according to EC directive 2000/14/EC. Sweeping debris container The structure consists of the debris container and integrated water tank. Made from highly durable stainless steel. Watertight rear door locking system with safety lock and drainage function. Two side service doors and side storage compartments. A water strainer allows the use of the debris container as a large water tank for street washing. Rear discharge lid, automatic multi-stage debris container support, two protected rear rotating beacons, and LED work lights are standard. Container volume 6.5 m³ Tip angle 54° (nominal) Door opening angle 125° (nominal) Water tank The water tank with anti-slosh protection can be filled from a Type 'A' hydrant. The double diaphragm pump is suitable for continuous operation and even dry running. Water volume 1,545 l (optional 2,000 l) Exhaust hood The smooth-surfaced exhaust hood is lined with frequency-tuned sound insulation. Brush Roller brush Ø 406 mm Roller brush width 1,275 mm Suction mouth width 750 mm Disc brush 500 mm (opt. Ø 650 mm) Special equipment - Superstructure with hydrostatic drive (V65h) and hydraulic auxiliary drive with HGB2 gearbox - Sweeping assemblies arranged for right-hand operation - Pneumatic lifting and lowering of the air guide screen in the dirt container - Pneumatically operated shaker device for air guide screen - Chain curtain in the dirt container in front of the air guide screen - Water tank connection coupling Type A, Storz 2 1/2 inch - Wastewater drain filter with graduated perforation mounted on the rear door, enables more efficient draining of the dirt compartment (see PI611) - Mounting frame on the rear door for attaching additional equipment - Additional spray nozzles on the rear of the suction mouth (Ni

Condition: used, power: 130 kW (176.75 HP), first registration: 09/2006, overall weight: 13,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2021, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, * Municipal vehicle * ABS * On-board computer Itjdexymrwjpfx Ah Ejl * Rear-view camera * Electric window lifters * Electrically adjustable mirrors * Heated mirrors * Roof hatch * Rear window * Driver comfort seat * Exhaust behind the driver's cab * Air dryer * Radio * ASR (anti-slip regulation) * Hill-start assist * Seat heating * 9-speed gearbox * Suspension: leaf/air * Payload: 4680 kg * Continuous brake: engine brake ----Body: Bucher Schörling suction and sweeping superstructure CityFant 60 with separate engine Mercedes Benz OM 904 LA, 4-cylinder diesel/75 kW, debris container capacity approx. 6 m³, container tipping system via electro-hydraulic pump with telescopic cylinder, hydraulic rear door, water tank capacity approx. 1,500 litres, suction mouth width 500 mm, suction hose diameter 250 mm, disc broom pushed, pneumatically lifted, broom diameter 700 mm, feeder brush rigid, pushed, broom length 1,500 mm, broom diameter 400 mm. Water system consists of 5 jets under the front collision bar and a gutter nozzle at the feeder brush, water pump ORL21, Bucher-Schörling control panel in driver's cab, MOTEC camera system. Operating hours read: 8,400 h----Good condition Sale to commercial customers only. FOR EXPORT ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION GIVEN WITHOUT WARRANTY ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All purchase agreements, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (please refer to the company imprint).

Condition: used, operating hours: 20,782 h, mileage: 193,509 km, power: 130 kW (176.75 HP), first registration: 04/2006, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 3,000 kg, empty load weight: 12,000 kg, wheelbase: 3,260 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, fog lights, immobilizer system, low noise, onboard computer, seat heater, traction control, trailer coupling, German vehicle, single owner, documentation available, only 193,509 original km, ONLY 20,782 operating hours, condition as per photos. Equipped with Bucher Schörling Cityfant 60 sweeper body, ideal for cleaning gutters, multiple-lane roads, traffic islands, roundabouts, and large surfaces. Features right-hand disc brush and central roller brush, with a hydraulic suction hose boom for cleaning gullies and waste bins as well as collecting leaf piles. Includes front spray bar, 6m³ debris container, 1,500-litre fresh water tank, separate Mercedes engine. Sweeping speed (work mode) up to 18 km/h (instead of 12 km/h). Debris container with V2A stainless steel floor tray. Municipal mounting plate with hydraulic connections, trailer coupling with electrical & hydraulic connections, municipal lighting and headlamps, air conditioning, air-suspended comfort seat, cab with 2 seats, seat heating, manual transmission, roof hatch, beacon, leaf/air suspension with lift and lower function, electric windows, differential lock, electrically heated mirrors, radio CD, EasyDrive (hydrostatic drive) (SN). Self-propelled street cleaning machine, wheelbase 3,260 mm, GVW 15,000 kg, unladen weight 12,000 kg, payload 3,000 kg. For sales to businesses and for export (both EU and non-EU), German commercial law applies. Itodpfew Ulc Sjx Ah Ejl If a new TÜV inspection is required, we are happy to provide an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV approval, DGUV inspection, safety test, or UVV. Further trucks can be found on our homepage. We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend viewing and inspection of the goods, to prevent any misunderstandings regarding condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is assumed for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to prior sale, changes, and errors.

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Itsdpfxoy Ayrre Ah Esl Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Iodpfsx Rq Slsx Ah Estl Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: excellent (used), You are bidding on: a high-quality plate shear and bending brake from a very good and well-known manufacturer – Schechtl. Features of the machine: Plate shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m (blade in top condition, see photos; original lettering still present, which may fade after frequent cutting) Iodpfx Ajy T H Nxeh Ejtl Back gauge Light bar with LED for cut line illumination Adjustable front support Bending brake KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot pedal Optional: back gauge or beading tool Attachment rail Round dies and other dies According to §25a UStG The machines are in good used condition and are ready for immediate use; they come from a private collection. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various dies, back gauges – everything related to sheet metal and steel processing, including bending brakes, plate shears, drilling machines, slitting and profiling machines, accessories (beading equipment, round dies for gutter production, back stops, etc.), and other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice according to §25a UStG, which includes the value-added tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and recommended after scheduling an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Bending brake KS 260504 & HT 260505

Condition: good (used), You are bidding here on a branded guillotine shear and folding bench from a very reputable and well-known manufacturer – Schechtl. Isdoyw Si Ejpfx Ah Eetl Device specifications: Guillotine Shear HT 200 - Capacity: 1.25mm steel, aluminum, etc. and more - Cutting length: just over 2m - Depth stop - Front support, extendable Folding Bench - KS model – Capacity: 1mm steel, aluminum and more (up to 1.5mm) - Bending length: just over 2m - Foot-operated closer - Optional depth stop or beading attachment - Round rollers and additional guide rails included - Sale according to §25a UStG Optionally, I offer the possibility to purchase a segment bending bench from the top manufacturer Cidan – likely the market leader. Cidan Machinery also includes Thalmann (top manufacturer of long folding machines) and Forstner (leading slitting line manufacturer). This is the heavy-duty version – 1m / 2mm steel - Aluminum and more significantly higher capacity - Triple-segmented - Angle display - Foot-operated closer - Storage box Note: The segment bending bench can be purchased in addition to any of my machine sets, but will not be sold separately. Additional price available upon request. The machines are in good and clean condition and ready for immediate use. They come from private ownership. Important: Optionally, you can find and purchase many machines and accessories for sheet metal and steel processing – such as folding benches, guillotine shears, drill presses, roll bending machines, slitting and profiling machines, accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from leading top manufacturers in our shop. If you have any questions, I am always available to help. You will receive an invoice according to §25a UStG. The invoiced amount includes VAT (differential taxation applies). Free loading available – weight approx. 750 kg and 650 kg. Inspection and testing by appointment via phone is possible and encouraged. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should occur within 10 days after the auction ends. Location: 97249 Eisingen, approximately 3 minutes from motorway A3 and A81. Item number: Folding Bench KS and HT

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel – aluminum, etc., and more Cutting length: slightly over 2m Iedpfsy Tafyjx Ah Ejtl Back gauge Adjustable front support Bending machine KSV – Capacity: 1.5mm steel – aluminum, approx. 2mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Rounding rollers and additional dies In accordance with §25a UStG The machines are in good, used condition and are ready for immediate use; they come from a private collection. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various dies, back gauges – everything needed for sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, rounding machines, slitting and profiling machines – accessories (beading device, rounding rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice in accordance with §25a UStG, which includes VAT – differential taxation. Free loading is possible – weight approx. 950 kg and 650 kg. Inspection and testing are possible and welcome after scheduling an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Item number: bending machine KSV 260506 and HT 260507.

Condition: good (used), You are bidding on: a branded folding machine from a very reputable and well-known manufacturer - Schechtl Device features: Schechtl KSV folding machine – reinforced model Rail bends cleanly Angle display Bending length just over 2m Sheet thickness 1.5 mm – suitable for aluminum, zinc, etc., more than 2 mm possible Standard rail - radius for aluminum, zinc is also available as an option Round rolls as shown in the picture Iedey Rtb Aspfx Ah Estl Optional: depth stop 500, additional rails Schechtl guillotine shear Useful length 2m Sheet thickness 1.5mm – more for aluminum Depth stop 500 mm Extendable sheet support Optional: additional accessories and tools available, such as bead forming device, tube bars and holders, tools, etc. Matching manual guillotine shear also available, please request a price for the set if interested, I will then configure it for you. Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing like folding machines, guillotine shears, drilling machines, round bending machines, slitting and profiling machines, accessories (beading device, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers, all in the shop. I am always available for questions. You will receive an invoice with VAT shown separately. Free loading possible – weight approx. 950 kg and approx. 1000 kg Inspection and testing are possible and welcome by telephone appointment. Payment in cash on collection. Take advantage of our experience and expertise, we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Item number: Folding machine KSV / Guillotine shear MT

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Isdpjy Ii Dzjfx Ah Estl Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...