Used Gu 2000 for sale (7,891)

Condition: good (used), Year of construction: 1997, Max. sanding length 1,400 mm Max. sanding width 610 mm Max. sanding height 550 mm Max. longitudinal stroke 1,480 mm Nsdper A Evrofx Ahvsku Max. cross stroke 560 mm Infinitely variable table speed 1 - 30 m/min Grinding wheel size 406 x 51 x 172 mm Max. table load 1,800 kg Total power supply 20 kW Machine weight approx. 6,500 kg

Condition: excellent (used), Year of construction: 1996, operating hours: 250 h, functionality: fully functional, We have a 2000 KVA container generator for sale. Optionally 400/230 V (50 Hz) or 10 kV (+/- 5%) (50 Hz) Fully installed in two soundproof 40' HC containers. Suitable and intended for multi-layer installation. Dimensions: (L x W x H) 12020 x 2500 x 5800 mm Weight: approx. 33 t + 11 t Engine: MTU 16v396 TB 34D Generator: A.v. Kaick DIDBN 130/125 h/4 Nkedpfx Ajwa Tg Dshvsu 2000 KVA Generator Engine and generator completely mounted on a base frame and connected via a flexible coupling. Cooling system: Separate table cooler installed as a dual-circuit cooler in the upper container, including temperature control, connecting lines (stainless steel cooling water lines with shut-off valves for each line), circulation pumps, control valves, etc. for safe operation. Tank system: 4000-liter tank system installed in the upper container, including system-specific accessories and complete piping. Air supply and exhaust system: Soundproof baffles within the air supply and exhaust chambers in the container. Air supply and exhaust openings each equipped with appropriate weather protection grilles, motor-operated blinds in the container that open automatically when the generator is in operation. Exhaust system: Insulated exhaust ducts within the container lead vertically from the container via silencers through the upper container, discharging the exhaust gases through the container roof. Switchgear: Medium/low-voltage switchgear for fully automatic emergency power operation!!! Optionally 400/230 V or 10 kV (+/-5%) Fully automatic machine monitoring with control for power failure detection, automatic start-up, and emergency power takeover. Upon power recovery, the system automatically switches back to the mains supply. In the low-voltage range, parallel operation with the mains/resynchronization is possible. Control for external mains switch - optionally 10 kV or 400/230 V Low-voltage switchgear equipped with: 3200 A generator switch (400/230 V) Medium-voltage switchgear equipped with: 115 A generator switch (10 kV) Technical data of the type-tested medium-voltage switchgear Panel type: ZS8 Rated voltage: 12 kV Operating voltage: 10 kV etc.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° Nkedpfsymnykox Ahvou MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 9520190, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 30,000 rpm, overall weight: 3,300 kg, In July 2025, the drive module, hard disk module, PLC card, and the display module with keyboard were replaced for €24,000. A replacement spindle can be purchased separately for €4,000. TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 560 mm Nkedpfsymmtvex Ahvou Spindle speed: 30,000 rpm MACHINE DETAILS Weight: 3,300 kg Voltage: 380 V 50 Hz Rated current: 38 A EQUIPMENT Centralized lubrication system

Condition: used, Year of construction: 1988, grinding diameter 250 mm Njdpfjynnvbjx Ahvsku grinding length 600 mm max. dia. of grinding wheel 355 mm max. width of grinding wheel 50 mm peripheral speed 2.000 m/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 670x770x1203 mm Weight 142 kg Njdpfx Ajvz Hi Ajhvjku Total power requirement 1,2 kw

Condition: new, neu Nkedpfx Ahjynnb Deveu ca. 3-6 Wochen ab Auftrag Türkei 130600 € 2468.34 € 200 to 1200 mm 740 mm 220 mm 24 - 140 mm 50 1/min 950x600 mm 100 mm 390 mm 15 kW 2350 mm 1700 mm 3435 mm 14900 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 - 14 Wochen ab Auf Slowakei 28300 € 540.53 € 40 to Nkedpeynm A Tofx Ahvou 2000 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW 1750 mm 950 mm 1900 mm 2100 kg 420 mm 1 10 mm/s 12 mm/s 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Takamaz XY-2000 Plus CNC Lathe (2008) Manufacturer: Takamaz Model: XY-2000 Plus CNC Lathe Year of manufacture: 2008 Control: Fanuc 31i-A Condition: used, powered on and in production. 2x spindle (2x Hainbuch collet chucks) 2x tool turrets, each fully equipped Nkedpfxeynl H De Ahvou Parts catcher Bar feeder Chip conveyor Documentation Approx. 30-40 tool holders Additional collets Video available. Further information upon request.

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm Nksdpfxsynk Sre Ahvsu equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Nksdpfjynky Ajx Ahvou Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles FORM 2000 HP Year of manufacture: 2012 C-frame design, fixed table with lowering tank Travel (X/Y/Z): 400 x 300 x 350 mm Table to quill distance: 170-520 mm Max. workpiece size (L x W x H): 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and EDM (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best attainable surface finish: Ra 0.10 µm AGIEVISION 5 control interface 15” LCD color screen, mouse or touchscreen, lift keyboard, and manual control unit Including EROWA ERC 80 robot - Electrode changer - Pallet changer Net weight of the machine: 3,830 kg Machine dimensions: 1,410 x 2,460 x 2,660 mm Nodpoyniyusfx Ahvoku Upon order confirmation, the machine will be cleaned, serviced, and tested by us. Optional: - Commissioning and training - Transportation and installation - Cooling unit - Dielectric fluid

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm Nedpfxexm R S Ue Ahveku -Table height: 735 mm -Plate thickness: 125 mm -Transport dimensions: 2000/1400/H735 mm -Weight: 2220 kg

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine Nedpfsv Tpxqjx Ahveku -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 2500mm -Width: 2000mm -Plate thickness: 40 mm Nedpfxsikn Rrs Ahvsku -Plate: with support ribs - Flatness: see photos (guideline not included) -Transport dimension: 2500/2000/H875 mm -Weight: 3110 kg

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Nkjdpfow A Nnpox Ahveu

Condition: used, Year of construction: 1997, lifting height: 5,003 mm, load capacity: 2,000 kg, Warehouse technology Still EGV 2000 Drive Electric Nodpfjynbriex Ahveku Year built 1997 Lifting height (mm) 5,003 Lifting weight (kg) 2,000

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Nksdpjynaluofx Ahvju Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 2017, Technical details: current intensivity: 6 A total power requirement: 3 kW weight of the machine ca.: 0,07 t voltage: 3x 400 V : 50/60 Hz Protection class: IP 21 welding current: 25-200 A cooling type: AF Nksdpfeym Ur Hjx Ahvou

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm Nkodpexylm Hjfx Ahvou no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table Njdpfoym Ndqox Ahvjku - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC Nedsym Ncaopfx Ahvjku Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2004, Robot Kuka KR210 series 2000 Year of construction 2004 Reach 2700 mm Weight 1245 kg Nkjdpfx Asbg Rt Ijhvju Load capacity 210 kg Control VKRC2 (VW / Audi version) Weight 185 kg Software version V4.1.7 SP08 (standard Kuka software, no VW) Kuka KCP2 Connection lines 7m .

Year of construction: 2004, condition: good (used), Robot Kuka KR210 series 2000 Year of construction: 2002/2004 Nodpfxj Tx Tpo Ahvjku Reach: 2700 mm Weight: 1245 kg Load capacity: 210 kg Control VKRC2 (VW / Audi version) Weight 185 kg Software version V4.1.7 SP08 (standard Kuka software, no VW) Kuka KCP2 Connection lines 7 m ..

Condition: good (used), Year of construction: 2002, Robot Kuka KR210L180 Series 2000 Year of manufacture: 2002 Reach: 2700 mm Weight: 1245 kg Payload: 180 kg Controller: KRC2 Nedpfxs Tx Tue Ahvoku Controller weight: 185 kg Software version: V4.1.7 SP08 Kuka KCP2 Connection cables: 7 m