Used Groove for sale (1,303)

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Csdpfx Asx S Hzljiijri Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Condition: used, groove width 3-28 mm tool length - max. 1200 mm working speed 3m/min+6m/min m/min pulling capacity 60 kN bei 3m/min kN pulling capacity 40 kN bei 6 m/min kN stroke 1050 mm weight of the machine ca. 600 kg Includes a wide selection of reaming needles Csdpfx Aeyz Dgdeiiori The following needle widths are available (approx. dimensions): 6; 6; 8; 12; 14; 16; 18 The following mandrels (approx. dimensions): Ø 17; 19; 21; 30; 38; 44; 50; 58

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Cjdpfxexz Hh Us Aiijri Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: new, thread dia. M16 - M42 metrisch 50 - 200 U/min. working area max. 1300 mm engine output 1,2 kW weight 105 kg dimensions 0,85 x 0,85 x 0,3 mm Electric tapping machines for M16 - M42 threads, Angle adjustable. 8 pcs. Quick-change chuck with slip clutch. Crsdpfx Aiowinywsiei Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm 3 mm 2 mm Csdpfxswirv Ne Aiieri 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 7000 € 135.1 € 1550 mm 2 mm 90 mm 6 m/min 1.5 kW 2130 mm 700 mm 1200 mm 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device Codpfx Aiowiqnksisri user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,-

Condition: new, neu 090256 Dezember 2026, Zwischenve Türkei 7500 € 144.75 € 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN Crodswira Iepfx Aiisi

Condition: excellent (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Cjdpfx Aisxtvgksijri Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: good (used), Year of construction: 2018, machine/vehicle number: 1000028154, functionality: fully functional, Equipment: rotational speed infinitely variable, The machine was commissioned in 2019, single owner. It has seen very little use. Csdpfxoxdl H Us Aiisri Description Useful working area, 5-axis configuration: X=3280mm, Y=1600mm Axis travel: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Axis traverse speed: X=80m/min, Y=60m/min, Z=30m/min Electrospindle: HSD, 5 axes 11 kW, with continuous 360° rotation on B and C axes, enabling high-precision machining of complex shapes liquid-cooled Drilling head: HSD 20 vertical spindles 4 horizontal spindles grooving discs on X-axis grooving discs on Y-axis Work table: 6 cross beams Isbjwhypnjni Itxtobb 4 suction cups per beam preparation for uniclamp Tool magazines: 16-position revolver-type tool changer Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring firm clamping of the parts during processing

Condition: as good as new (ex-display), functionality: fully functional, Edgebander with most accessories in its technological range, with an excellent quality/price ratio. Crodpfx Aijqw Ux Tjisi Work table dimensions 3465 x 710 mm Min. ÷ max. thickness of rolled edges 0,4 ÷ 3 mm Max. thickness of edges in strips 5 mm Min. ÷ max. panel height 8 ÷ 50 mm Min. panel length/width 190/110 mm Feed speed 9 m/min This edgebander increases productivity with the feed track of the panel brought to a speed of 9 m/min and it guarantees high quality standards in processing thanks to the possibility of working with polyurethane glue, perform grooves, all being extremely easy to use. MACHINE COMPOSITION: ME 40TR AUTOMATIC EDGE BANDER 109999 Security execution R00341 me 40tr versione CE 930731 Volt 400 EU 931201 Frequency 50 Hz 580653 EDGE SCRAPING UNIT 580444 BRUSHING UNIT 580654 GLUE SCRAPING UNIT 580656 Spare glue pot for poliurethane glue with fast unloading system 580509 Device for the panel edge heating 580510 Anti-adhesive unit 580548 Spray-mist device for edge finishing 580658 "Nesting" copying device kit for Trimming unit 580659 "Nesting" copying device kit for Edge scraping unit 580666 Internal machine lightening

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Crjdpfx Asq U Rm Hsiiji Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling Csdpfx Aorb Afaeiijri - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm Credpfxow E I Ruj Aiisi - planing height: 50 mm - spindle diameter: 40 mm - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 19 kg, cutting height (max.): 305 mm, warranty duration: 24 months, input voltage: 230 V, torque: 5 Nm, rotational speed (min.): 1,420 rpm, rotational speed (max.): 1,420 rpm, fuel type: electric, input frequency: 50 Hz, input current: 5 A, cable length: 4,000 mm, protection type (IP code): IP55, saw band length: 1,710 mm, saw band speed: 1,500 mm/s, control type: manual, actuation type: manual, mobility: mobile, Equipment: CE marking, documentation/manual, NEW | 100% EUROPEAN PRODUCTION | DIRECT FROM MANUFACTURER The PBS300 is a professional portable bandsaw for beams, structural timber, solid wood and complex wooden components. With a cutting height of 305 mm and a weight of only 19 kg, it combines substantial cutting capacity with excellent mobility. Compatible with 6–13 mm blades, it handles tight curves, intricate contours and precise straight cuts in large timber sections. Ideal for carpentry, timber framing, joinery, workshops and construction sites. A practical tool for independent craftsmen and larger businesses alike, ready whenever precision and efficient cutting are required. BUILT ON EXPERIENCE Drawing on over 10 years of industry experience and feedback from thousands of direct customers worldwide, Astra Pro develops purpose-built woodworking tools. Our philosophy: professional equipment should be precise, reliable, easy to operate and affordable, without unnecessary complexity or investment. PRECISION CAST ALUMINIUM WHEELS The Ø203 mm wheels are cast from EN AC-43300 (AlSi9Mg) aluminium alloy according to EN 1706, with optimised mass distribution and reinforced geometry. Precision turning and dynamic balancing reduce rotational imbalance and vibration, supporting smooth operation, stable blade tracking and accurate cutting. DUAL BLADE GUIDANCE SYSTEM Crodjv Tcuxjpfx Aiiji On one side, steel-and-aluminium guides feature precision EDM-machined grooves. Their 180° reversible design allows a second groove to be used, extending service life. On the opposite side, triple-bearing guides with standard 696 C3 bearings provide controlled blade support with low rolling friction. Together, both systems help reduce blade heating, friction and premature wear, supporting accuracy and longer blade life. ENGINEERED SIMPLICITY Blade tensioning and lower-wheel tracking adjustment are integrated into one mechanical system. Setup is intuitive, precise and straightforward. The frame uses carefully selected aluminium alloys, precision TIG-welded for durable joints. Potential failure points are minimised through thoughtful engineering. Routine maintenance is largely limited to cleaning, inspection and adjustment. INDUSTRIAL DRIVE & SERVICE A 0.75 kW industrial induction motor, 230 V / 50 Hz, S1 continuous duty, delivers dependable performance with low maintenance requirements. Standard blades, 696 C3 bearings and replaceable motor capacitors are locally available, helping minimise downtime. Original spares and accessories are supplied by Astra Pro. CUSTOMER FEEDBACK "Game changer for us." "What takes a lot of time and energy now is a 7-minute cut. I absolutely love it." "We use it all the time." "Amazed how it improved work." TECHNICAL DATA Model: PBS300 / T305XT Condition: New Cutting height: 305 mm Wheels: Ø203 mm, EN AC-43300, EN 1706 Blade: 1710–1712 × 0.65 mm Widths: 6 / 8 / 10 / 13 mm Guides: Reversible EDM grooves; triple-bearing 696 C3 Motor: 0.75 kW, 230 V / 50 Hz, S1 Weight: 19 kg 100% EUROPEAN PRODUCTION Every machine is manufactured entirely in Europe and individually hand-assembled in Poland. Declared dispatch: 3 working days from order confirmation. DISTRIBUTION OPPORTUNITIES Specialist dealers can expand their range with a distinctive machine addressing real, underserved market needs.

Condition: refurbished (used), functionality: fully functional, Hello, We are offering rebuilt ER-093996 Square 25 Holder C from Erowa. Credpfxjwa Sffo Aiioi The holders were converted from the old version ER-010607 without gripper grooves and sealing plate. We completely disassembled, blasted, cleaned, and readjusted them. Including clamping spigots. You are also welcome to send us your holders for rebuilding or overhaul. We are happy to answer any questions or provide technical assistance.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 90 mm, working width: 1,550 mm, roller height adjustment: 110 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 600 kg, total length: 2,300 mm, total width: 700 mm, total height: 1,150 mm, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, AKYAPAK AS 1550x90 sheet metal bending machine 1550mm x 2.5 mm, 3 rollers /ct2289/ Electric, pedal-operated rolling machine. Strong, robust construction. The upper roller can be rotated to remove the workpiece Convenient to use, suitable for workshops and industry Manufacturer: AKYAPAK AS 1550X90mm Year of manufacture: 2002 Bending Length: 1550 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Motorized adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manual folding end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 2400x800x1200 mm Weight 600 kg Crjdpfx Aioxmvgksiei

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Cjdpfexacbuex Aiiori Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: excellent (used), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center with extensive features and in notably excellent condition. — Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Traversing paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix nesting or console table • Optional: edge banding and labeling — Features • Dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior fittings — The machine is available immediately. Dismantling and transport can be arranged by our service team upon request. — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to change and errors excepted. Crsdpoxk Tumofx Aiiei

Condition: used, Year of construction: 2011, Weinig CUBE Moulding machine Description; Dimensions of the infeed table: 2000 mm Number of axes: 4 Spindle Sequence: Bottom-right-left-top Motor power resp. 5,5 - 5,5 (R+L) - 5,5 kW Mobile spindle: No Tools: Weinig Easylock Planing width: 20 / 260 mm Planing height: 80 / 160 mm Throughput: 12 m/min Groove bed: No Other comments: Optical laser projection, 10" touchscreen (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Crsdpfxezqddre Aiiei Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, number of slots in tool magazine: 23, total length: 10,000 mm, total width: 4,100 mm, Equipment: CE marking, documentation/manual, HOMAG BMG 311 Venture 316 XXL – 5-Axis CNC Machining Centre Csdpfx Ajzp Ih Eeiisri Lightly used and maintained in excellent condition, this HOMAG BMG 311 Venture 316 XXL is almost like new. The machine is equipped with a powerful 5-axis machining unit, 23-position tool changer, multiple vertical and horizontal drilling heads, grooving saw blade, and extensive routing and drilling capabilities. It is suitable for complex furniture, cabinet, door, panel, and solid-wood machining applications. Thanks to its versatile configuration, the machine can perform routing, drilling, sawing, grooving, and angled machining operations in a single setup. A highly capable and well-equipped CNC machining centre with very low operating hours, ready for immediate production.

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Csdpfxjzqtzte Aiiori Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Groove saw Static frequency converter Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Safety mats on the front. CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety feature: Photoelectric cell Crsdpozxyfzofx Aiisi Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: used, functionality: fully functional, Year of construction: 2023, machine/vehicle number: 6971, load capacity: 230 kg, empty load weight: 1,550 kg, fuel type: electric, total length: 1,900 mm, drive type: Elektro, construction width: 760 mm, working height: 7,800 mm, Scissor lift Chassis number: 6971 Condition: Ready for operation and fully functional Crjdpfx Aiszydv Hsiei Technical condition: Good Front tyre type: Non-marking Front tyre condition: 80 - 100% Rear tyre type: Non-marking Rear tyre condition: 80 - 100% Battery type: PzS Battery year: 2023 Battery condition: 80 - 100% Description: 2 front drive wheels, theoretical climbing ability of 25%, battery charge indicator and diagnostic display, manual platform lowering valve, control panel on platform and chassis with emergency stop button, multi-disc brakes on front wheels, manual brake release, solid rubber, non-marking tyres without tread grooves, mobile pothole protection, tilt alarm, operating hours recording, lifting and lowering alarm, horn, double flashers, travel alarm, overload alarm.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 460 kg, total width: 610 mm, total length: 1,850 mm, total height: 1,590 mm, SHEET METAL BEADING MACHINE ETB 40 – METAL TECHNICS POLSKA PROFESSIONAL SHEET METAL BEADING MACHINE The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. KEY FEATURES • Maximum sheet thickness: 4 mm • Powerful 2.2 kW electric motor • Heavy-duty steel construction • 300 mm throat depth • Precise material guidance • Suitable for a wide variety of beading and flanging operations • Quick and easy roll replacement • Ideal for HVAC, tanks, enclosures, and steel fabrication • High manufacturing quality • Machine available from stock TECHNICAL SPECIFICATIONS • Model: ETB 40 • Maximum sheet thickness: 4 mm • Roller width: 165 mm • Throat depth: 300 mm • Roller speed: 15.3 rpm • Motor power: 2.2 kW • Dimensions (L × W × H): 1850 × 610 × 1590 mm • Weight: 460 kg APPLICATIONS The ETB 40 is ideal for manufacturing: • HVAC ducts and fittings • Air-conditioning components • Cylinders and tanks • Machine enclosures • Decorative sheet metal components • Flanges, reinforcing beads and stiffening profiles • Components for the automotive and steel fabrication industries HEAVY-DUTY CONSTRUCTION The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. EASY OPERATION The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. TRANSPORT & TECHNICAL SUPPORT Csdpfx Ajzkubzjiieri We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. WHY CHOOSE METAL TECHNICS POLSKA? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Cjdpfx Ajzku Rpsiisri Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space