Used Groove for sale (1,284)

Condition: new, functionality: fully functional, Manual equipment to cut the corners of the box blanks and make V & U-shape grooves. Ideal for mock-up samples and short runs. Corner sizes: max. 150 x 150 mm Cardboard sizes: max. 700 x 700 mm (box) max. 1000 x 700mm (cardboard cover) Cardboard thickness: min. 1 mm – max. 4 mm Hsdpew Ad N Ujfx Aahop Tools: Nr.1 for “V” shape groove from 80° to 100° Nr.1 for “V” shape groove from 100° to 130° Nr.1 for “U” shape groove from 6 mm to 8 mm (optional) Wheelbase: no limit

Condition: good (used), Year of construction: 2015, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: TEK05/2015, type of input current: three-phase, sheet thickness steel (max.): 1 mm, sheet thickness (max.): 1 mm, total width: 840 mm, total length: 15,000 mm, total height: 153 mm, feed length X-axis: 46,000 mm, feed length Y-axis: 2,000 mm, input voltage: 380 V, working width: 2,000 mm, infeed width: 1,500 mm, control cabinet length: 1,500 mm, control cabinet height: 1,000 mm, control cabinet width: 800 mm, feed rate X-axis: 700 m/min, workpiece weight (max.): 163 kg, product height (max.): 1 mm, input current: 380 A, power: 150 kW (203.94 HP), coil weight: 10,000 kg, HIGH GROOVE SHEET PROFILING LINE (Corrugated Metal Sheet ribs 53/85/135/153 mm) Profile Type: H53 mm / H83 mm / H135 mm / H153 mm Sheet Metal Profile Thickness: 0.75 mm - 1.25 mm Minimum - Maximum Profile Length: 1500 mm - 15000 mm Manufacturer: TEK MAK Year of Construction: 2015 Condition: Very good condition for rolls for profiling 53, 85, 135, and good condition for rolls for profiling the 153 mm rib. Components of the Line: Hedpjuannxefx Aahsp Hydraulic Uncoiler, 10-ton capacity Profile Forming Machine Mobile Guillotine Stacking Table Control and Command Panels

Condition: good (used), Touchscreen display Hsdpfx Ajxzfk Isahjp

Condition: good (used), Year of construction: 2007, 1 numbering stamp Hedpexyfr Aofx Aahop

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, Four-sided planer Weinig Model Powermat 400 LE - machine with ribbed table Year of manufacture: 2008 Operating hours: 8000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles featuring the Powerlock system Spindle configuration: Hedpfx Aowybrneahsp - bottom 5.5 kW - left and right – 7.5 kW each - top – 7.5 kW - bottom – 7.5 kW Spindle speed: 6000 rpm Feed speed steplessly adjustable via inverter: 5 – 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, complete with cutter heads.

Year of construction: 2022, condition: excellent (used), Manufacturer / Model Voorwood L115M (H) with return conveyor Machine Type: Edge Foiling / Profiling / Sanding / Grooving Line with Return Conveyor Overview High-production edge finishing machine capable of profiling, sanding, grooving and applying decorative foil to panel edges and drawer side groove in a single pass. Includes return conveyor system for continuous single-operator workflow. Key Features - Single-pass shaping, sanding, and foil application - Up to ~8,000 lineal feet per shift - Return conveyor system for continuous production - Bottom feed chain with non-marking pads - Digital readouts for fast setup - PLC touchscreen controls - Temperature-controlled foil application with auto disengage Conveyor System - Receiving rollers: 5–100 FPM - Transfer belts: 115 FPM - Return rollers: 90 FPM - Adjustable working height: 29”–40” - Handles material up to 2½” thick - Independent motors for receiving and return Hodpfx Aajyvcw Ajhep Machining Stations Shaping: 5 HP motor, adjustable spindle Sanding: precision sanding spindle Foiling: 8” wheel, temperature controlled, auto tension Grooving saw: 8” blade, 3 HP motor Capacity - Feed speed: 2.4 – 10.7 m/min - Thickness: 3 – 51 mm - Minimum part size: 76 × 76 mm Utilities - 3-phase power - Dust extraction: 3 × 127 mm ports - Approx. 400 CFM required Ideal For - Drawer sides - Cabinet manufacturing - MDF edge finishing - High-volume production

Condition: ready for operation (used), Year of construction: 1970, stroke 300MM max width 32MM tooling Hedpfx Aaov D Dxtohjp

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm Hsdpfjyr Utnsx Aahsp • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: Hsdpfxsyywcve Aahsp No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine Hodpfxsc S Di Re Aahjp SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg Hedpfxozh H I Is Aahep - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2009, number of axes: 3, This 3-axis BIESSE Skipper 100 was manufactured in 2009. It features a versatile working range with a maximum length of 3,000 mm and a width of 1,000 mm. The machine is equipped with 78 independent drilling spindles, allowing for efficient vertical and horizontal drilling, as well as routing and grooving capabilities. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Skipper 100 machine we have for sale. Contact us for further details. • Workpiece capacity • Length: 90 – 3,000 mm • Width: 70 – 1,000 mm • Thickness: 8 – 60 mm • Working ranges • X-axis • Vertical drilling: 0 – 3,000 mm • Horizontal drilling (X and Y): 0 – 3,000 mm • Continuous routing: 0 – 2,500 mm • Partial routing: 0 – 3,000 mm • Continuous grooving with saw (X direction): 0 – 2,500 mm • Partial grooving with saw (X direction): 0 – 3,000 mm • Y-axis • Vertical drilling: 0 – 1,000 mm • Vertical drilling with 32 mm system: 32 – 1,000 mm • Horizontal drilling in X: 0 – 1,000 mm • Horizontal drilling in Y: 90 – 1,000 mm • Routing: 0 – 950 mm • Grooving with saw (X direction): 112 – 1,000 mm • Z-axis • Material thickness: 0 – 60 mm • Machine configuration and features • 78 independent drilling spindles in two mirrored machining units: • 39 spindles in the upper unit • 39 spindles in the lower unit • Per machining unit: • 29 vertical drilling spindles (19 along X, 10 along Y, 32 mm spacing) • 8 horizontal drilling spindles along X (4 with dual output) • 2 independent horizontal drilling spindles in X • 2 independent horizontal drilling spindles in Y • 3.5 kW HSK electrospindle, 6,000 – 18,000 rpm • Upper and lower work (pressure) tables • Upper and lower machining units • Electronic thickness control • Central automatic lubrication • PC-based CNC control (Windows XP 600 with Soft CN) • Safety system Additional equipment • Roller loading table • Right-side belt unloading conveyor Hodpezh H Iuofx Aahop

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Hsdpfx Aajd E Ixzshjp Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, ALTENDORF Model F45 Pro Drive Hodpoiz Aufefx Aahsp Offer type: New machine, FOR SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer's warranty. Pro Drive control: 3.5" color display with separate keyboard Automatic dimension correction on the parallel and miter fence when the saw head is swiveled Easy axis calibration Machine diagnostics, operating hour counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the parallel fence 400V / 50Hz - Europe, scale: scale in mm Electromotive height and swivel adjustment 0 – 46° for the main saw blade with automatic correction of the cutting height when the saw head is swiveled Machine height 910 mm (standard equipment) The control panel of the F 45 is mounted at eye level. This allows all axes to be easily controlled, and all settings are within view. The one-hand operation of the outfeed device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way on the smooth machine front. INCLUDES OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 Single-sided swiveling saw head with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Miter fence, cutting length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the double roller carriage Note on used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex works, pickup only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as is, as viewed, without any warranty claims. • The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We only answer inquiries if you provide your address + telephone number!)

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a HAGER HDG 250 lathe in mint condition with a center width of 1,000 mm. The exhibition machine is in original condition, therefore you have the full warranty. Technical data - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) safety groove - Spindle bore (diam.) 20 mm - Tailstock quill 150 mm / MK3 -Hand rest upper section 300 mm -Weight 270 kg -Length x width 1,800 x 640 mm - Motor 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Hodpfstpnykjx Aahep Related terms: lathe, lathe machine, lathe, lathe, woodturning, woodturning machine, turning, woodturning knife, turning, machine, Hager Reference: R-A0117

Condition: excellent (used), Year of construction: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 lathe with a center height of 250 mm. The machine was used in our in-house lathe courses, is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) drain safety groove - Spindle bore (diameter) 20 mm - Tailstock quill 150 mm / MK3 - Hand rest upper part 300 mm - Weight 270 kg - Length x width 1,800 x 640 mm - Motor 2.2 kW (3 HP) - Speed 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, woodturning bench, turning, woodturning knife, woodturning, turning, machine Reference: DH25500-K Hodpfx Aasrtqi Ijhsp

Condition: like new (used), DEMONSTRATION MACHINE A Stratos XL demonstration lathe with a center height of 280 mm is for sale. The lathe was only used for a short time for demonstration purposes at Hödnerhof. It can therefore be described as as good as new with full guarantee / warranty. Technical data: Hodpfx Aju Szr Usahep - Center height 280 mm - Turning diameter above the bed: 550 mm with optional additional bed (external turning device) up to 1,000 mm! - Center width approx. 780 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock with MK2 cone - Frequency converter (3 belt stages): Stage 1: 60 - 1,200 rpm | Stage 2: 100 - 2,200 rpm | Stage 3: 150 - 3,700 rpm - Quill travel 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor 2.2 kW / 3 HP - Weight approx. 320 kg The machine is located at Hödnerhof in A-6341 Ebbs. Subject to prior sale! Pick up address: Hödnerhof Blumenwelt Eichelwang 2 A-6341 Ebbs Related terms: woodturning machine, lathe, lathe, lathe, woodturning, woodturning knife, wood turning, turning, machine Reference: DDSTRATOSXL-VH

Condition: not inspected (used), Year of construction: 2001, Tenoning spindle 2 St. Number of milling agregates 4 St. Spindle diameter 50 mm weight 5500 kg loading dimensions L x W x H 7500 x 2500 x 2400 mm # 7020 Gubisch CW 3/8 with tooling ----- Sold on behalf of the customer from the customer's location. Machine can be viewed in operation Summary of technical data (please inquire about any additional accessories included) ----- Cross-cut saw ----- Electronically controlled cross-cut saw Number of tools: 1 pc. Spindle speed: 3000 rpm Spindle diameter: 30 mm Max. tool diameter: 350 mm Motor power: 3 kW Length stop ----- Electronic length stop 2 Tenoning and slotting spindles: ----- Number of tools per spindle: 4/5 pcs. Spindle stroke: electronic Spindle speed: 3800 rpm Spindle diameter: 50 mm Hsdpfx Aozhxl Soahop Spindle length: 320 mm Max. tool diameter: 320 mm Motor power: 9.2 kW 1st Profiling spindle (climb and conventional cutting) ----- Number of tools: 4 pcs. Vertical spindle stroke (pneumatic): 3 x 80 mm Horizontal spindle stroke: 80 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 240 mm Motor power: 9.2 kW 2nd Profiling spindle ----- Number of tools: 4 pcs. Vertical spindle stroke (pneumatic): 3 x 80 mm Horizontal spindle stroke: 80 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 240 mm Motor power: 9.2 kW 3rd profiling spindle ----- Number of tools: 4 Vertical pneumatic spindle stroke: 3 x 80 mm Horizontal spindle stroke: 80 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 240 mm Motor power: 9.2 kW Additional units ----- Overhead grooving unit Further features ----- Online-capable for data transfer from window software Rebating device for tear-free rebating Double-part package Return conveyor system for one-man operation Screen-based control Used window tooling IV 68, 78, 80, 92 (window profiles available on request!) (Technical specifications according to manufacturer!)

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: Hjdpfx Ajzhvymjahop - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: excellent (used), CATALOG NO. 7773 TECHNICAL DATA - max. working width: 900 mm - max. working height: 160 mm - from above: - metal feed roller I unit – grooved rubber calibration roller II unit – 2x metal calibration rollers + pad Hedpfx Aozhvcneahjp - from below: - conveyor belt - pneumatic oscillation of belts - electric table lift - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6–8 bar - extraction port diameter: 2x200 mm - dimensions (LxWxH): 1850x1950x2040 mm - weight: approx. 3000 kg ADVANTAGES - Italian production - calibration sander + pad - used sander, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on 4.2 EUR exchange rate (Prices may vary due to significant fluctuations)

Condition: good (used), Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder, tool holder Hsdpfx Ajzhuwwoahep -Quick-change tool holder: Quick-change turning tool holder -Recording dimensions: see photos -Tool holder: for grooving/slotting steel -Dimensions: 140/60/H125 mm -Weight: 1.9 kg

Year of construction: 2026, condition: new, functionality: fully functional, Vacuum Press / Membrane Press "Columbus Infinity" (Vacuum press system for special lengths with freely definable usable area) – including digital Master Manual and AI support on tablet for a secure start and reproducible results. The COLUMBUS Infinity is a specialized vacuum pressing system for applications requiring especially long usable surfaces. The machine can be configured to the length desired by the user upon request, making it especially suitable for special laminations, long workpieces, and high-throughput series production. The defining Infinity Principle enables the usable surface to be efficiently extended in length. In combination with the rolling membrane system and multi-zone vacuum extraction, the machine offers high flexibility and precise control of vacuum application. Only the area of the surface actually in use is vacuumized, which saves energy and ensures optimal process control. Technical specifications: • Vacuum table with freely configurable length • Rolling membrane system with manually guided linear carriage • Membrane wound on a reel for easy unrolling Hsdpfx Aozhtbbjahsp • Patented vacuum buffer reservoir integrated in the table frame • Multi-zone extraction for targeted activation of individual working areas • Tabletop made from 21 mm birch multiplex board • Milled vacuum groove for reliable membrane sealing • Sturdy substructure made from welded steel construction • Adjustable machine feet • High-performance vacuum pump, 80 m³/h Possible usable areas: Width and length are defined individually according to customer requirements. COLUMBUS machines are designed for long-term industrial use and built using premium industrial components. The robust design, proven components from reputable manufacturers, and precise workmanship guarantee long service life and reliable operation. Every COLUMBUS Infinity is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical knowledge of vacuum technology as well as Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization and comes delivered with a tablet for direct use.

Year of construction: 2026, condition: new, functionality: fully functional, Vacuum Press / Membrane Press "Columbus Infinity" (Vacuum press system for special lengths with freely definable usable area) – including digital Master Manual and AI support on tablet for a secure start and reproducible results. Hodpjzhr Uaefx Aahsp The COLUMBUS Infinity is a specialized vacuum pressing system for applications requiring especially long usable surfaces. The machine can be configured to the length desired by the user upon request, making it especially suitable for special laminations, long workpieces, and high-throughput series production. The defining Infinity Principle enables the usable surface to be efficiently extended in length. In combination with the rolling membrane system and multi-zone vacuum extraction, the machine offers high flexibility and precise control of vacuum application. Only the area of the surface actually in use is vacuumized, which saves energy and ensures optimal process control. Technical specifications: • Vacuum table with freely configurable length • Rolling membrane system with manually guided linear carriage • Membrane wound on a reel for easy unrolling • Patented vacuum buffer reservoir integrated in the table frame • Multi-zone extraction for targeted activation of individual working areas • Tabletop made from 21 mm birch multiplex board • Milled vacuum groove for reliable membrane sealing • Sturdy substructure made from welded steel construction • Adjustable machine feet • High-performance vacuum pump, 80 m³/h Possible usable areas: Width and length are defined individually according to customer requirements. COLUMBUS machines are designed for long-term industrial use and built using premium industrial components. The robust design, proven components from reputable manufacturers, and precise workmanship guarantee long service life and reliable operation. Every COLUMBUS Infinity is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical knowledge of vacuum technology as well as Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization and comes delivered with a tablet for direct use.

Condition: good (used), SET of Tool Holders SK 40 tool holders according to DIN 69871, with gripper groove and tightening thread M16 (some with screwed-on tightening bolts) Consisting of: Arbor sleeves: 1 piece, Ø 13 4 pieces, Ø 16 8 pieces, Ø 22 1 piece, Ø 27 Hjdpfx Aaszhrk Ishep (without clamping screws, spacer rings, drive keys; these are available in stores) WELDON holders 5 pieces, Ø 6 1 piece, Ø 8 8 pieces, Ø 10 2 pieces, Ø 12 9 pieces, Ø 20 5 pieces, Ø 25 4 pieces, Ø 28 Reducing sleeves 2 pieces, MK 3 Total of 50 pieces (unit price only €12.00 net) Only available as a complete set!

Condition: new, HOUFEK SPB Buldog 5 RC wide belt sander -Exhibition machine- Includes: - HOUFEK SPB Buldog 5 RC wide belt sander Working width: 1,350 mm Includes: - Grooved steel roller Ø 160 mm HOUFEK Including: - HOUFEK segmenter sanding pad electronically controlled, for width 1,350 mm Sanding pad PS 50 E Includes NC control with Hjdpfx Aaju R Szmshjp 10.1" touchscreen Frequency converter for the sanding unit 3-18m/s Automatic table positioning Two-zone interval blow-off device with Nozzle oscillation for sanding belt cleaning - new exhibition machine -