Used Groove Milling Machine for sale (66,127)

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Hedsy Rgm Espfx Agtjfl Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: reconditioned (used), Tool milling machine: Deckel Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometrical overhaul in 2026 Technical data: Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 min-1 Feed rates: (18) 8 - 400 mm/min Hodpfx Agozcdarotofl Head swiveling: 180° Equipment: - Geometry report - 3-axis digital display, new - Spindle protection device with limit switch, new - Machine light, new - Horizontal and vertical spindle - Fixed angle table - Coolant system - Chip tray

Year of construction: 2018, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE Hfsdpfowla Hnjx Agtjl LONGITUDINAL TRAVEL: 2500 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1300 mm RAPID FEEDS L-T-V: 40 m/min TABLE SIZE: 3500 x 2500 mm HEAD: A/B AXIS AUTOMATIC ; A-axis ±185° - B-axis ±270° ; HSK A100 ; 12000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 64 POS CONTROL UNIT: HEIDENHAIN TNC640 WEIGHT: 51370 Kg ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; LASER TOOL SETTER ; PAPER FILTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Type: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: used, from a training workshop, cleaned and operational, ready for demonstration Spindle hours: 2,542 hours X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 - 4,500 rpm Feed rates: 0 - 2000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1920 kg Space requirement: approximately 2000 x 2000 x 2100 mm Total power consumption: approximately 7 kVA Central lubrication system Coolant system Hedpszza Smofx Agtsfl CE compliant Scope of delivery: – Technical documentation – Full protection enclosure – LED machine light

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Hsdpfx Agsv Rpr Sotsfl Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel ranges X/Y/Z: 600 x 450 x 500 mm Rotary table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions L x W x H approx.: 2,950 x 2,200 x 2,300 mm 9926ä

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm Hodpfezx Hfbex Agtefl z-travel 350 mm tool taper SK40 spindle turning speed range 110 - 1230 U/min table-size 270 x 700 mm total power requirement 3,7 kW weight of the machine ca. 900 kg dimensions of the machine ca. 1400 x 1400 x 1700 mm Features: - 3-axis digital display - Milling head swivels ± 45 degrees - Coolant system - User manual

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Hodpfx Agjyuty Sstefl Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Used CNC boring and milling machine Manufacturer: WMW / UNION Gera Type: CBFK 130/2 Spindle diameter: 130 mm Manufacturer: VEB Werkzeugmaschinenfabrik UNION Gera Design: Traveling column boring machine (planer type) Tool magazine available CNC control retrofitted or modernized Weight according to nameplate: 28.3 t Connected power: 80 kW Control: Heidenhain control Technical data Spindle diameter: 130 mm Tool holder: ISO 50 Main drive: 32.4 kW Connected power: 80 kW Hsdpozffmkofx Agtsfl Spindle speed: up to 3,000 rpm X-axis travel: 3,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,275 mm W-axis spindle stroke: 400 mm B-axis: 360° Clamping surface: 1600 x 2000 mm Table load: 7000 kg/m2 Machine weight: approx. 28–30 t Tool magazine: 60 Year of manufacture: 2007 (general overhaul)

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 Hodpfx Agjw U U Sijtjfl spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: used, Year of construction: 2015, x-travel 1020 mm y-travel 610 mm z-travel 610 mm Hodpfx Agezzfbmstofl control Heidenhain iTNC530 weight of the machine ca. 7390 kg

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Hfedpfxsy Rgl Uj Agtol Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: excellent (used), fuel type: diesel, color: yellow, first registration: 01/2018, Year of construction: 2018, Drive: Track Unladen weight: 30,000 kg Technical condition: very good Visual condition: very good Price: On request CATERPILLAR PM 622 ASPHALT MILLING MACHINE 4 x track drive Hfsdpfxsuxu Eqs Agtel Working width: 2235 mm Working depth: 0-330 mm 193 milling picks Hydraulically foldable discharge conveyor CAT Grade Control automatic levelling 2 x operator consoles with LC display Hydraulically liftable side plates Rear-view camera Weather protection roof, foldable Driver's seats Work lights Cleaning system CAT Diesel engine, C18 622 HP Original paint FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Year of construction: 1988, x-travel 870 mm Hfsdpsxlkw Uofx Agtjl y-travel 370 mm z-travel 400 mm table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Condition: like new (used), Year of construction: 2020, Console milling machine Reckermann 1300 Kombi Hfsdpfx Agox A Etfjtsl The machine is in absolutely mint condition. The customer did not receive the parts for which the machine was intended.

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm Hodpfxsztaq Ts Agtefl - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm Hfjdpfx Agjzx Rq Ijtel - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive Hfjdpfjzyy Rmox Agtol - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 12,000 rpm, total height: 2,778 mm, total width: 2,977 mm, total length: 3,635 mm, overall weight: 6,700 kg, workpiece weight (max.): 800 kg, - Control system: SIEMENS 828 D including OPERATE and ShopMill - Number of magazine positions: 30 - Tool interface: BBT 40 - Internal cooling: 20 bar Hfjdezx U Nzopfx Agtsl - Tool weight: max. 8 kg - Tool change time: 3 s - Chip-to-chip time: 5.5 s - Blum tactile probe ZX-Speed IR - Blum 3D measuring probe TC-52 LF

Condition: used, x-travel 315 mm y-travel 180 mm z-travel 320 mm 5 14 mm Hjdpfx Agoxwdvhstjfl ISO 40 DIN 2079 45 - 1950 U/min flute distance 10 - 170 mm/min no. of flutes 4 m/min total power requirement 5,1 kW distance between table/spindle 1400 kg diameter of rotary table 3000 x 2700 x 1800 mm - Robust/powerful universal milling machine - HEIDENHAIN digital display - Coolant device

Condition: used, Second-hand KUPER RFG roller shutter guide milling machine for milling the roller shutter guide slots into the roller shutter guide strips / roller shutter guides / roller shutter guide rails, fitted with a Scheer HM 16 hand-held router. Technical data: Hfodezza A Sjpfx Agtjl - Speed: 18,000 rpm - Power: 2,000 W

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm Hfedpfozxq Tpox Agtsl - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, MECOF MASTERMILL HPC3 X: 4000 MM Y: 1600 MM Z (VERTICAL): 3000 MM Hfjdpfx Aezzp Dxogtel RAM SECTION: 500 X 500 ROTARY TABLE: 2000 X 2500 - TRAVEL 1500 MM - CAPACITY 30 TONS SPINDLE SPEED: 6000 RPM TOOL CHANGER: 80 POSITIONS HEAD: BI-ROTATIVE HEAD WITH AUTOMATIC MILLIMETER-ACCURATE POSITIONING HIGH INTERNAL SPINDLE PRESSURE - RENISHAW FOR TOOL MEASUREMENT CNC: HEIDENHAIN TNC 530i

Condition: used, Year of construction: 2016, For sale Duplo 746 Cutter creaser. Year 2016 Top Spec with extra optional Modules includes: CPM-04 RTM-04 Current product, fully supported by Duplo offering support, Supply of spare parts and supported! 1 owner from new, Previous client paid 90K new!! Very nice condition. These new cost £90k Plus, Machine is in stock in my warehouse. Inspecting and testing welcome in Tadley Reading. The Duplo DC-746 Cutter Creaser is Duplo’s most powerful and versatile slitter, cutter, and creaser, designed to handle high-volume production with precision and speed. Ideal for applications like business cards, brochures, and intricate direct mail pieces, it streamlines complex finishing tasks in a single pass. With advanced features, including a high-capacity feeder, automated setup for up to 30 jobs, and lightning-fast speeds of up to 50 sheets per minute, the DC-746 ensures maximum productivity. Its enhanced feeding mechanism supports a wide range of paper types, delivering unparalleled accuracy even for digital stocks prone to curl or static. The DC-746 is expandable with optional modules for rotary perforating and cross-perforating, making it a perfect choice for PSPs looking to increase efficiency, reduce manual intervention, and produce premium-quality finished products. Specification and Features Machine Dimensions W 3040mm x D 870mm x H 1730mm (with PC) Automated Set-up From barcode In-feed Paper Size Min: 210mm x 210mm Max: 370mm x 670mm Creases Hfodpfxozx Htfj Agtjl Max. 20 per sheet Cuts Max. 30 cuts per sheet Slits Six (standard) (8 with options fitted) Ideal for Business cards Folded flyers Tickets Perforated vouvhers

Condition: good (used), Year of construction: 2018, Ref. -No.: 10643 Manufacturer: FERMAT Type: Gantry Year of construction: 2018 Type of control: CNC-Steuerung Control: Siemens Sinumeric Hodpfx Agezx Ny Ustsfl Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 20000 mm Y-Travel: 7800 mm Z-Travel: 2000 mm W-Travel: 1000 mm Turning Speeds: 20000 RPM Speed work spindle: 0 - RPM Max. Torque: 3294 Nm Rapid Traverse X/Y/Z: 40000 m / min Table-Size (Lxw): 20000 x 5000 x 300 mm Power Capacity: 74 kW Headstock - (spindle diameter): 160 mm Further information: - Tool cooling - Low pressure - Tool cooling - High pressure 50 bar (6,000 liters) - Tool cooling - Oil separator - Sludge pump - Machine enclosure (CE) - Electrical - Linear measurement - Electrical - Remote diagnostics - ATC/Robot Robot 140 - Chip conveyor 2 - Operator cabin / protective screen - Electrical - HH iTNC 640 control system - Electrical - Handwheel - Electrical - Air conditioning for the distributor - Head - Type 2x UHA 0.001 The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), Holzmann FS 200SF Professional Woodworking Machine – Made in Austria For sale: Holzmann FS 200SF woodworking machine, manufactured by the Austrian company Holzmann Maschinen. Reliable and robust equipment, ideal for professional woodworking workshops or carpentry businesses. Technical specifications: Model: FS 200SF Manufacturer: Holzmann Maschinen (Austria) Voltage: 400 V / 3 Phase / 50 Hz Hfedpfx Aeyq Nzdegtel Motor power: 3.8 HP (continuous – 100%) 5.3 HP (S6 duty cycle) Condition: Good working condition, well maintained and ready for use. Key features: Robust industrial design Powerful 3-phase motor Reliable Austrian engineering Suitable for professional woodworking applications