Used Groove Grinding Machine for sale (64,936)

Condition: ready for operation (used), A surface grinding machine is offered. Horizontal grinding spindle, ball-bearing mounted, dual system, hydraulic: infinitely variable table speed, manual: handwheels for individual parts and fine adjustment, flat or V-guides. Inspection possible by appointment. Ijdpfxeyuglue Ahvjtd

Condition: not inspected (used), functionality: unexamined, Two machines are being sold as a package for spare parts. Centerless grinding machines ----- 1* Manufacturer: NOMOCO, Type: M100 E Machine no.: 5069 Year: 1977 Max. grinding diameter: 100 mm Max. grinding length: 180 mm Grinding wheels: Ø 400 mm Max. wheel width: 180 mm Weight: 3,200 kg ----- Manufacturer: NOMOCO, Type: M100 Machine no.: 2338 Year: 1974 Machine is equipped with a stack magazine, feed through a pusher. Machine is set up for plunge grinding. Conversion to through-feed grinding possible. ----- * The concentricity testing device is not included in the scope of delivery. Itodpfx Ahjyc N D Nsvjd The machine has been disconnected from the power supply, i.e., it cannot be demonstrated under power. Removal and loading are at the buyer’s expense. For prices, please refer to the "Documents" section, or send an inquiry by email. A forklift for loading is not available, but can be arranged if required.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical glass washing machine 1600 mm open top working direction from right to left number of brushes : 4 glass thikness : 3 - 20 mm Itodpfx Ahexyhntsved total lenght : 700 cm

Condition: new, Year of construction: 2026, grinding length: 700 mm, grinding width: 400 mm, COSMOS E 7040 NC Precision Surface Grinding Machine, grinding area 700 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, very user-friendly, incl. magnetic chuck 700 x 400 mm with adjustable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, fine grinding, spark-out and retraction, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to provide on-site installation and training as well as subsequent service! Financing / leasing available upon request – we will gladly provide an offer! Itodjrwwt Sjpfx Ahvjd

Year of construction: 2022, condition: good (used), functionality: fully functional, We are selling our Montana Crystal Rock due to upgrading to a Wintersteiger Jupiter. Iodpfx Ajyuayfjhvotd

Condition: excellent (used), Control SIEMENS 840D Iodpfxjyrhl Rs Ahvotd

Condition: excellent (used), Year of construction: 2001, 1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of manufacture: 2001 CNC control: Siemens 840C Largest external machining range: 150 mm Largest swing diameter above table: 310 mm Table strokes X-axis: 1050 mm Z-axis: 300 mm Workpiece speeds NC programmable: 0 - 3000 rpm Infeed speed continuously adjustable: 0.01 - 10 mm/min Infeed stroke dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 tons Itjdpfxjwcrnfo Ahvjd

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, 1 Internal and Surface Grinding Machine Manufacturer: WEMA Glauchau Model: SI 6/1 AS-Nx500 Year of manufacture: 1989 Grinding depth: 500 mm Workpiece spindle speed range: 40 – 400 rpm Distance from workpiece spindle flange to grinding spindle carrier: 1450 mm Adjustment travel of internal grinding device: 530 mm Max. workpiece diameter: 500 mm Distance from workpiece spindle flange to steady rest: 280 – 650 mm Internal grinding diameter: 40 – 400 mm Ijdpfxsyn D Imj Ahvstd External grinding diameter: 400 mm Rapid traverse: 10 m/min Grinding feed rate: 0.1 – 8 m/min Machine weight: 6.5 t.

Condition: excellent (used), Year of construction: 1980, 1 External cylindrical grinding machine Brand: Fortuna Year of manufacture: 1980 Iedpfx Ajyn Ebzehvstd Grinding length: 1500 mm Grinding diameter: 350 mm

Condition: excellent (used), Diameter: 400mm Itodpfx Ahoyt Sqajvod Length: 500mm

Condition: excellent (used), Length: 500mm Diameter: 200mm Itsdpfx Aheyt Sp Aevjd

Condition: used, Year of construction: 1952, workpiece length 5000 mm swing dia. 1100 mm clamping length 6000 mm grinding diameter 1100 mm grinding wheel diameter 1300 mm workpiece weight 2500 kg main drive motor 22 kW crankshaft bearing diameter 275 mm steady 100-250 mm speeds of tool 400/500 U/min workpiece turning speeds 20-40 U/min weight of the machine ca. 30 t 13 Grinding Steady Rests Mandrels Mounting Flanges Clamping Devices The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Iedsyt Rxvepfx Ahvjtd Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, functionality: fully functional, grinding length: 510 mm, grinding width: 250 mm, Reduced slip-stick effect thanks to plastic-coated x and y-axis guides. The longitudinal table guide is flat, while the transverse guide is triangular. Radial and axial forces are evenly distributed on special backlash-free bearings in the grinding spindle head. A separate hydraulic unit with heat exchanger prevents vibration and overheating. High stability thanks to ribbing and dimensioned wall thicknesses. Digital control of automatic vertical feed with servomotor. The hydraulic system ensures smooth table movement, even under heavy load. Rapid approach to workpiece height, automatic lifting after completion of the work cycle. Adjustable longitudinal and vertical table feed via end stops. PLC models are equipped with SIEMENS PLC controllers and touchscreens. Technical specifications: Table clamping surface width: 510 mm Table clamping surface depth: 250 mm T-slots (quantity/width): 1 / 14 mm Electromagnetic table size: 250 x 500 mm Longitudinal travel (x): 560 mm Itedpfx Ahoyt Hzmeved Transverse travel (y): 275 mm Max. spindle axis-to-table distance: 450 mm Max. table load: 180 kg Grinding wheel size: 200 x 20 x 31.75 mm Hydraulic table feed speed: 5 - 25 m/min Grinding spindle speed: 2850 rpm Grinding spindle motor power: 2.2 kW Hydraulic pump motor power: 0.75 kW Vertical feed motor power: 0.5 kW Total motor power: 3.45 kW Voltage: 400 V Dimensions (W x D x H): 1900 x 2050 x 1840 mm Weight (approx.): 1750 kg Transverse feed (Y): Automatic transverse feed: 0.5 - 8 mm/stroke Rapid transverse feed: 990 mm/min Transverse feed per handwheel revolution: 4 mm/rev Graduation on handwheel (Y): 0.02 mm Vertical feed (Z): Automatic vertical feed: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke Rapid vertical feed: 480 mm/min Vertical feed per handwheel revolution: 2 mm Graduation on handwheel (Z): 0.005 mm

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 10229, functionality: fully functional, operating hours: 25,000 h, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 200 mm, grinding belt length: 1,800 mm, grinding height: 190 mm, height adjustment type: electric, actuation type: electric, total height: 1,890 mm, total length: 2,070 mm, total width: 1,020 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, The machine is in very good condition, has been used only a little, with the option of refurbishment upon agreement. Iedpsyt Hkuefx Ahvotd

Condition: new, Year of construction: 2026, Long knife profile grinding machine, grinding area 1800 x 250 mm, spindle power 40 KW, with swivel magnet and clamping device, table dresser, automatic cooling nozzle adjustment, grinding wheel 500 x 150 x 203 mm, very powerful machine, we would be happy to send you further details, we look forward to your grinding task, delivery time for new machine approx. 9 months. Financing / leasing, no problem, we would be happy to make you an offer! Itedpjh H Strefx Ahved

Condition: repair required (used), TSCHUDIN HTG400 sold as a parts donor. Mechanically, the machine is in good condition; electrically, it must be checked and repaired. The drive motors are functional. The same applies to the internal cylindrical grinding machine TRIPET AR 200 with internal grinding attachment and face grinding attachment. Itsdpfx Ahoyt E Irovod Both machines are being offered for parts.

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, COSMOS SG 840 NC Precision Surface Grinding Machine, grinding area 800 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, highly user-friendly, incl. magnetic chuck 800 x 400 mm with variable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, finish grinding, spark-out and lift-off, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to handle installation / on-site training, as well as future service! Financing / leasing available, we will gladly provide you with an offer! Iedpfjw Ifdcex Ahvetd

Year of construction: 2026, condition: new, functionality: fully functional, PRECISION ASSURED: Our ultra-fine filter system solution for Grinding oil optimizes your tool production at the highest level In today's demanding manufacturing environment, the quality of your products is critical. Our MANTA ultra-fine filter systems are designed to clean your grinding oil at a microscopic level to maximize the performance and life of your precision tools. Available in many different versions. Enquire now – we will find the right machine for you Iodjyt Enxjpfx Ahvjtd

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Iedpfouiafuox Ahvstd

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 92060, grinding length: 650 mm, grinding width: 230 mm, total height: 2,276 mm, total length: 3,030 mm, total width: 1,784 mm, workpiece weight (max.): 200 kg, grinding height: 397 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, grinding wheel diameter: 205 mm, table speed: 25,000 mm/min, table length: 2,000 mm, table load: 20,000 kg, type of input current: AC, table width: 2,000 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, table height: 250 mm, grinding spindle motor power: 1,500 W, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 5 rpm, grinding spindle speed: 3,000 rpm, input voltage: 380 V, disc diameter: 205 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Okamoto ACC52SA is a precision surface grinding machine featuring a horizontal grinding spindle and hydraulic longitudinal feed, primarily used in toolmaking, jig and fixture manufacturing, and small batch production. The machine is distinguished by its robust cast construction, precise guideways, and user-friendly operation. It is especially suitable for high-precision grinding of flat surfaces and for machining hardened workpieces. Itsdpsyt Dm Hefx Ahvod Typical for the ACC series are sturdy double-V guideways and automatic feed systems, ensuring uniform surface quality and high repeat accuracy. Okamoto SA Control (MDI control) Cycle control and manual operation The quoted price is exclusive of dismantling, packaging, and shipping. Sale from site, subject to prior sale. The machines are sold in used condition; any warranty or guarantee is excluded.

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Itsdpfxeug Ty Ho Ahvjd Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: new, Year of construction: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive 2nd unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive Both units with oscillation: yes Height adjustment: handwheel Height indicator: mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum carpet: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg Ijdpfxev R U Ifj Ahvstd

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm Itedpfxsya Hl Es Ahvjd - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: reconditioned (used), functionality: fully functional, The machine is retrofitted and modernized in 2025. The modernisation consists of adding the automatic infeed and auto cycle functions. The HMI and operating panel is offered in English, German and French. Dimensions Grinding Wheel (OD x ID x width) Ø 350 x Ø 127 x 100 mm Grinding wheel width 100 mm Ø min / max to rectify 1.5 / 50 mm No. infinite grinding wheel speeds Min / max speed of regulating wheel (r.p.m.) 10/250 rpm Infeed : Auto Auto cycle : Yes Dressing : Manual Dimensions Regulating Wheel (OD x ID x width) Ø 230 x Ø 76.2 x 100 mm Regulating wheel width 100 mm Maximum length to be rectified in plongeé 200 mm Length 1800 mm Width 1300 mm Iodpjvtl Rpsfx Ahvjtd High 1600 mm Weight 2000 Kg Accessories: New Coolant tank with paper filtration system

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Weinig Rondamat 980 Year 2010 Technical data: Max. tool width: 330 mm With PowerLock: 322 mm Tool flight circle: 100 - 300 mm Itjdpewvvylofx Ahved With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed frequency-controlled: 1500 - 4600 rpm Grinding spindle drive: 1.5 kW