Used Grinder Other for sale (21,450)

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , Njdpfxoqx Sz Ds Afaowf There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp

Condition: used, mileage: 58,943 km, power: 85 kW (115.57 HP), first registration: 04/1995, overall weight: 3,000 kg, fuel type: gasoline, color: green, axle configuration: 4x4, empty load weight: 2,849 kg, tire size: 205r16, wheelbase: 2,850 mm, gearing type: automatic, emission class: euro1, suspension: other, machine/vehicle number: 694, Equipment: all wheel drive, differential lock, truck registration, TUV and AU are newly made truck registration , The Puch is in a really good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The Puch is equipped with: ZAUGG snow blade electro-hydraulic drive, snow plow can be adjusted by the driver while driving, there is a counterweight in the rear for good traction, all-wheel drive and off-road reduction, rear differential lock, 2 seat paws, high off-road capability for extreme winter use. Tire size 205R16, Mercedes automatic transmission with 4 gears, total weight 3000 kg, engine capacity 2296cm? , 24Volt power supply, Nodpfxoqx Sz Ij Afajwf There are several vehicles in stock All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp

Condition: like new (used), Year of construction: 2024, CONTAINER TYPE: 20-Foot DV Storage Container / Special Container / Workshop Container – One Way RAL 6005 (Moss Green) Multipurpose personnel door 1x2m Tilt window 1x1m with roller shutter Lighting system with 3x luminaires and 10x 230V sockets, protected Nedoxny Rpepfx Afaowf Custom colours available: Anthracite grey / Gentian blue / Signal red / Light grey / Bottle green Further individual modifications available at an additional cost. RENTAL also possible: from €2.50 per day The key advantage of storage containers lies in their versatility regarding placement. Storage containers can be used as stationary units for extended periods or as a temporary solution for interim storage, ready for onward transport. Thanks to their robust construction, storage containers can also be quickly relocated as needed. This provides excellent flexible storage solutions. DELIVERY CONDITION: Fully operational and ready for use, wind- and waterproof Wind- and waterproof, cleaned CSC certificate (certified safety standard) New paintwork and conversion options available on request OPTIONAL CONVERSION OPTIONS: Shortening the container to your required length Painting in any desired RAL colour Special conversions available on request TRANSPORT: Delivery to any region Delivery by standard truck chassis or crane vehicles BASIC CONSTRUCTION: Robust steel frame design, roof, side and end walls made from fully welded trapezoidal sheet metal, large container double doors with locking mechanisms, wooden flooring. DIMENSIONS: External dimensions in mm: 6,058 x 2,438 x 2,591 (L x W x H) Internal dimensions in mm: 5,898 x 2,350 x 2,389 (L x W x H) We look forward to your enquiry! BIMICON Container Service Your specialist from Hamburg

Condition: new, fuel type: diesel, Year of construction: 2024, machine/vehicle number: EXVAC SE.7, RIVARD suction excavator / order vehicle Nedpfx Ajkl N Rxofaewf EXVAC SE.7 !! Delivery time: < 8 months !!! RIVARD industrial turbine Detachable suction hose inlet 7.0 m³ container volume 4-joint boom Hydrostatic drive Filter cleaning Rear / front fall protection Camera route monitoring

Condition: used, container length: 24 ft, color: white, overall weight: 16,000 kg, empty load weight: 2,900 kg, loading space volume: 43 m³, loading space width: 2,460 mm, loading space length: 7,300 mm, loading space height: 2,390 mm, CASSA MOBILE ISOTERMICA RIVERNICIATA BIANCO RAL 9010 POSTERIOR DOORS Nwodpfok Dufrjx Afaof PAVIMENTO IN RESINA

Condition: like new (used), Year of construction: 2024, 20 foot DV NEW, NEW storage container / sea container / material container one way - SPECIAL COLOR! RAL 3001 signal red with easy-open door system Nwsdoythi Sopfx Afaof Lockbox for secure locking The advantage of storage containers lies in their versatility when it comes to installation. Storage containers can be used stationary for a longer period of time or provided as a short interim solution with subsequent onward transport. Due to their design, the storage containers also offer the option of being moved quickly if necessary. Storage containers therefore offer excellent options for flexible storage. DELIVERY CONDITION: completely ready for use and functional, wind and waterproof wind and waterproof, cleaned CSC certificate (certified safety standard) new paint and conversion options on request OPTIONAL CONVERSION OPTIONS: Shortening the container to the desired length Painting in the desired RAL color Windows Steel floor Light E-package Openings & flaps Partition walls Event container special conversions on request TRANSPORT: Shipping of the containers to any region Delivery with regular truck chassis or crane vehicles BASIC STRUCTURE: Stable steel frame construction, roof, side and front walls made of fully welded trapezoidal sheet metal, large container double door with locks, wooden floor. DIMENSIONS: External dimensions in mm: 6,058 x 2,438 x 2,591 (L x W x H) Internal dimensions in mm: 5,898 x 2,350 x 2,389 (L x W x H) We look forward to hearing from you! BIMICON Container Service

Condition: used, loading space volume: 5 m³, loading space width: 1,500 mm, loading space length: 3,300 mm, loading space height: 1,300 mm, Aluminum cover: - Provence Benne - 5m³ - Side flap - Side handle - from Nissan Cabstar garbage truck - Overall dimensions: 330cm x 150cm x 130cm (lxwxh) - Footprint (floor): 180cm x 150cm (lxw) Nsdpfxjqxucgs Afaswf You can find a video of this offer on You can find our entire vehicle inventory at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, machine/vehicle number: 1388A, mileage: 932 km, power: 179 kW (243.37 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,892 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, TUV is NEW!!! So-KFZ registration, The AM General in a really good condition directly from the Army, well maintained and maintained, the body is in a great condition (vehicle from the reserve) the paint is also already, just Natogrun matt, The M931A1 is equipped with: Cable winch, all-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), 2 diesel tanks with switch for the right or left tank, raised exhaust, air brake with ABS, 3 front seats, the body is a saddle plate movable for off-road driving. The saddle plate can also be fixed for road operation by means of sliding wedges , The km indication are miles , Driving license class 2 (truck) , Tire size 14.00R20 tubeless (very good condition) , Top speed 105 km / h , Engine capacity 14011cm? , , 24Volt power supply , The M931A1 has not only Tuv, but also drives reliably :-) - A tractor unit for real off-road use ! ! ! - The AM Generalist is a real pleasure to drive and can also be insured cheaply as a youngster. - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Nwsdeqx Sxlepfx Afajf

Condition: used, machine/vehicle number: 1380A, mileage: 20,481 km, power: 179 kW (243.37 HP), first registration: 07/1984, fuel type: diesel, overall weight: 16,388 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, crane, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a good condition directly from the Army , Well maintained and maintained, the body is in good condition (vehicle from the reserve) therefore the paint is bad and partially flaked , The M936W / W is equipped with: All-wheel drive, 5-speed automatic gearbox, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body is a 5-ton telescopic crane with an extension. The vehicle is equipped with: front thread, heavy rear thread, tractive force 12474kg, mountain support (these can be attached to the front, rear and side, 4-point support can be extended laterally, various accessories, the km are miles, driving license class 2 (truck), tire size 11.00R20 (very good condition), top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M936 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timerr AM Generalist drives really great makes a lot of fun . - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Nedpfxeqx S Ado Afaewf

Condition: used, machine/vehicle number: 518A, overall weight: 1,700 kg, axle configuration: 1 axle, first registration: 03/1996, The floodlight trailer is in a dreamlike good condition directly from the military Well maintained and maintained, the body is in a super good condition, the Nencki is equipped with: 400 volt emergency generator 15.6 KVA with 4-stroke engine (gasoline) with electric starter, light mast with 6 steps that can be cranked up to 7465mm by hand, 6 headlights with 1000 watts each, these can be rotated 240 degrees vertically and 360 degrees horizontally from the control panel, Extendable 4-point support with which the floodlight trailer stands securely up to a wind speed of 80Km/h for higher wind speeds the mast must be braced, - Instructions in 3 languages (German, French, Italian). - The trailer has the dimensions L/W/H 4005/ 1740 / 2300 in folded driving mode, - The lighting system is overrun braked with Swiss 50mm drawbar (can also be converted to a ball head coupling, is not included in the price, - Tire size 205 R 16, other extras: support wheel for cranking and folding, tarpaulin, - 3 pieces in stock ! ! - Operating hours from 129 to 343 H - All my vehicles can be seen on my homepage. - Now you are rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why do you want to settle for less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Nodpfxeqx S Dfj Afaowf

Condition: used, grinding length / mm grinding width / mm workpiece height / mm Schanbacher S 3 50 Saw Blade Sharpening Machine – working condition – industrial unit For sale is a high-quality circular saw blade sharpening machine manufactured by Willy Schanbacher KG (Germany). The machine is ideal for precise sharpening of circular saw blades used in metal and woodworking industries. Technical details: Manufacturer: Willy Schanbacher KG (Esslingen, Germany) Type: S 3 50 Nwodpfsy E Tyuex Afajf Serial number: 93 2187 Machine type: Saw blade sharpening machine Condition: Working condition Used, with normal signs of wear Last used without issues Features: Adjustable grinding angles (e.g. 90°, 120°, 140°) Precision grinding unit Feed mechanism for consistent sharpening Safety guard included Heavy-duty industrial design Applications: Metalworking Woodworking Workshops and sharpening services Scope of delivery: Machine as shown ?? Inspection possible by appointment ?? Shipping via freight forwarding available

Condition: excellent (used), OMAB/Comec curved part grinder Working width 200mm Sanding belt oscillation Pneumatic material clamping Main motor 5.5kw Nwjdotvfmhspfx Afasf Feed motor 0.25kw Extraction stubs 2x100mm Dimensions of the machine 210x80x150cmH Weight 450kg

Condition: excellent (used), functionality: fully functional, Double-sided grinder Grützmacher GSP10 Working width: 200-1000 mm Working height: 230 mm Number of units: 2 Mechanical oscillation of sanding belts Pneumatic head approach Nsdpoxmgrqefx Afaswf Grinding motor power: 2×7.5 kW Oscillation motor power: 2×0.15 kW Sanding belt: 2500x250 mm Exhaust ports: 2x140 mm

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Nwedpfoy En Dnjx Afaof Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, For sale is a FELDER wide belt sanding machine FS 722 with a sanding table size of 2200 x 800 mm. The machine is in very good condition and has been serviced and inspected by our specialized staff (fully functional). Technical data: - Sanding table size: 2200 x 800 mm - Height adjustment via hand crank - Offset machine frame - Sanding belt size: 5750 x 150 mm - Extraction connection: 160 mm Nsdpsy Emy Iofx Afajwf - 4 HP (3 kW) motor, 400 volts - Machine can be disassembled! Shipping not possible! The machine is located in A-8561 Söding and can be inspected and picked up at any time during our opening hours. Subject to prior sale. Related terms: sander, wide belt, surface processing Reference: R-Z1314

Condition: used, * Container canopy suitable for 20" container! * Unused / New! * Price: 1,500 EUR, net + 19% VAT. For further questions, please call: Nwedey Hnu Aepfx Afaef Erik Kortum: WhatsApp All information is provided without warranty; errors and prior sale excepted.

Condition: used, Container canopy suitable for 40-foot container! Unused / New! Price: €1,900 net + 19% VAT. Nwedpfey Hnuvjx Afajf For further questions please call: Erik Kortum: WhatsApp All information provided without guarantee; errors and prior sale excepted.

Condition: used, Year of construction: 2013, operating hours: 15,860 h, Equipment: all wheel drive, Internal vehicle no.: FG12586 At our premises in Kaufungen - Kassel, available immediately. More info from Luis Lucena. Errors and omissions excepted. Nedpfxoy Hndko Afaswf We are happy to trade in your used vehicle. Financing available directly through our company. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 1992, Manufacturer: Beyer Type: Globetrotter Year of construction: 1992 Screen: 2 deck 3,00x1,25 Fractions: 3 Axles: 2 Tires: 335/65R18 Length: 12,070 mm Width: 2,750 mm Height: 4,000 mm Weight: 11,920 kg Nodpjwlipfsfx Afajwf Machine ready for immediate use. Subject to errors and prior sale.

Condition: used, Year of construction: 2003, High bucket for CAT 5130 10.8 m3 Weight approx. 30t good, ready-to-use condition other parts for CAT 5130 available!! Location Germany Nwjdpfxowlim Rs Afasf for further information please call

Condition: used, mileage: 434,500 km, power: 176 kW (239.29 HP), first registration: 02/2005, overall weight: 14,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2005, Equipment: ABS, air conditioning, all wheel drive, crane, * Euro Cargo 140 E 24 W * Single tires, 4x4 all-wheel drive * Atlas loading crane AK 65.2 A1 * Grab and rotary servo control * Grab and rotary servo control, 5th and 6th hydraulic circuits * Meiller three-way tipper * Cab rear wall with window * Main exterior mirrors electrically adjustable * Steps suitable for construction site vehicles * Tow coupling (manufacturer: Rockinger) * Roof hatch/ventilation flap * Tachograph * Rotating beacon (yellow) * Exterior sun visor * Leaf suspension * Unladen weight: 8,530 kg * Vehicle overall length: 6,800 mm * Width: 2,550 mm * Height: 3,550 mm * Permissible trailer weight: 14,000 kg Nodpfx Afot Drzxjaswf * 3 seats, passenger bench * Halogen headlights * ABS * Disc brakes * Reinforced stabilizers front and rear axle * Differential locks front and rear axle * Adjustable steering column * 6-speed gearbox * Air conditioning * Heated seats * PTO (transmission-dependent) * 115 L diesel tank * Trailer brake system with red, yellow, and Duomatic connections * Trailer hydraulics * 3,690 mm wheelbase * Electric windows and mirrors * Radio * 395/85R20 tires, 15 mm tread depth front and rear * Driver's seat air-suspended and heated * Lumbar support * Front bumper with towing jaw * 1 previous owner * 2 vehicle keys * And much more. * Errors, changes, and prior sale reserved.

Condition: used, mileage: 257,400 km, power: 265 kW (360.30 HP), first registration: 04/2007, overall weight: 23,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 01/2027, gearing type: automatic, emission class: euro4, Equipment: ABS, air conditioning, all wheel drive, parking heater, * MAN TGA 18.360 4x4 Allrad * Winterdienst * Radstand ca. 4,50 m * Bedienpult für Anbauplatte Schmidt * Anbauplatte vorne * 4 x hydraulik Anschlüsse * Salzstreuerhydraulikanschluss * Rundumlicht 2 x * Arbeitsbeleuchtung * Unterwurfketten * AHK + DL- Anschlüsse * Anhängerhydraulik * Auspuff hochgezogen * Rückfahrcamera Nsdpfxey Hmzzs Afajwf * el. FH + el. Spiegel * Frontscheibenheizung * Radio * Tempomat * Multifunktionslenkrad * Sitzheizung * 2 x Luftsitz * Dachluke * Klima * Federung: Blatt/Luft * Meiller Abrollkipper * Meiller hydr. Unterfahrschutz * Reifen 385/65R22,5 ca. 70% * 315/80R22,5 ca. 70% * gegen Aufpreis mit * Abrollcontainer * Schmidt Salztreuer * S50-36 VCLN 660 * Beilack Schneepflug * PVF 34-4 * Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Control: Numroto incl. software Center height: 155 mm Maximum tool length: 270 mm Working area X/Y/Z: 530/400/320 mm Grinding wheel interface: HSK-E50 Spindle power: 16 kW Max. speed: 12,000 rpm Nodpfx Aey Eg Rysfaewf Power: 16 kW 4-position automatic grinding wheel changer including pallet loader with pallets

Condition: used, Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment Nwsdpfx Afohzcg Neasf

Year of construction: 1991, condition: ready for operation (used), A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible. Njdpfx Afjy Hk Tzjajwf