Used Gratings for sale (367)

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Hodpfx Ajynzg Heb Iok Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Year of construction: 2023, condition: as good as new (ex-display), Technical data: Hedpencd Duofx Ab Isk Inlet width mm. 650 Chopping height mm. 300 Output approx. 70 - 80 srm/h wood chips Chipping length approx. mm. 25 to 30 Infeed rollers piece 4 Rotor flight circle mm. 800 Chipping knife piece 2 counter knife piece 1 Feed motors kW 2x4,0 with cardan shaft weight approx. 7.000 Kg. infeed : horizontal Machine base : steel, gas-shielded welded Rotor : steel, inert gas welded, dynamically balanced. Bearing : Oversized roller bearings. Bearing housing : steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Hydraulic system consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding by 2 gear motors, direct engagement, NORD GEAR.

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Hedsncd Azspfx Ab Iok Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 77731, Band Slicing Machine Kronen GS 10 This band slicer with an extended infeed belt from Kronen is ideal for slicing vegetables and fruit. Thanks to the wide range of blades, the machine can cut slices, strips, and cubes. It is also possible to “slice” pulled meat using the specially designed pulled-meat knife. This slicer is highly suitable for salad, (leafy) vegetables, fruit, herbs, meat, fish, sausage, bread, cheese, nuts, and much more. It is ideal for use in large kitchens, catering, fresh-produce specialty shops, and industrial applications. Various cutting accessories are available for a wide range of applications. The easily adjustable control panel allows for quick product changes. The belt speed and blade speed are infinitely adjustable (frequency-controlled), enabling even delicate products to be cut effortlessly. This industrial slicing machine is made entirely of stainless steel. Specifications: • Production capacity: 1500 kg/h (depending on product and cut size) • Working width: 125 mm • Cut size: 1 mm – 45 mm • Cutting types: slices, strips, cubes, grating, pulled meat • Included blade: slicing blade 4 mm • Infeed height: 890 mm • Outfeed height: 610 mm • Voltage: 230V (3+N, 50Hz) Hodpex A Sg Ejfx Ab Iek • Power: 1.8 kW • Weight: 260 kg • Machine dimensions (W x D x H): 2530 × 650 × 1390 mm

Condition: used, functionality: fully functional, machine/vehicle number: 33029, mileage: 4,900 km, power: 175 kW (237.93 HP), first registration: 03/2024, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental service! Additional comparable vehicles available upon request. Right-hand drive, 6-cylinder engine OM 936, ABS, ASR, ESP, disc brakes, engine brake, reinforced chassis, front axle 5.3 t, rear axle 11 t, air suspension with differential lock, lane departure warning system, Active Brake Assist, hill start assist, underrun protection, reversing alarm, daytime running lights, rain sensor, light sensor, plastic toolbox, fuel tank (125 liters), AdBlue tank (8 liters), lockable fuel tank. Cab with 2 seats, driver comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote, immobilizer with transponder, digital tachograph, cruise control, sun visor, reversing camera. Hjdpfoynka Aox Ab Isk Hydraulically driven turbine – steplessly adjustable, container fully made of stainless steel, additional manual pump for raising the tank, weight display, working hour counter, sweeping hour counter and water level indicator (remaining volume 300 l), automatic shutoff of water supply when raising the sweeping unit or engaging reverse gear, acoustic signal in the cab when the tank is raised, 2 LED beacons and 2 LED work lights, sound insulation in the equipment compartment, sweeping unit right/left, dual-sided collection, dual sweeping system (simultaneous sweeping on both sides), sweeping width: 2,300 mm / with dual sweeping system: 3,940 mm, trailing disc brushes with steel bristles Ø 700 mm, adjustable disc brush tilt (joystick right and left), roller brush made of mixed polypropylene and steel wire bristles L=1,500 mm Ø 400 mm, spray nozzles for disc brushes, continuous front spray bar with 6 nozzles, 3 nozzles per disc brush, 6 nozzles in the suction mouth, 5 nozzles on the sweeping roller, water system for cleaning upper suction shaft with external water connection, stainless steel leaf grate approx. 2 m² area, pneumatic lifting and lowering with vibration mechanism, turbine wheel made of Hardox 700 – 8 mm thick, housing arch made of Hardox 500 – 5 mm thick, water nozzles for internal turbine cleaning, 2,000-liter water tank made of AISI 316 stainless steel integrated into the superstructure, filling via hose with backflow prevention, Wilden P1 diaphragm water pump, dry-run safe, leaf suction system at the rear, reversing camera with monitor in the cab, PM 10, holder for broom and shovel, cable remote control.

Condition: used, functionality: fully functional, machine/vehicle number: 33026, mileage: 19,900 km, power: 175 kW (237.93 HP), first registration: 01/2024, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The indicated mileage of the vehicles on offer may vary, as some vehicles are currently in rental service! Further comparable vehicles available on request. Right-hand drive, 6-cylinder OM 936 engine, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t air-suspended with differential lock, lane keeping assist, Active Brake Assist, hill-start assist, underrun protection, reverse warning buzzer, daytime running lights, rain sensor, light sensor, plastic toolbox, fuel tank (125 liters), AdBlue tank (8 liters), lockable fuel tank. Hsdpfx Ajyni Tnob Iek Cab with 2 seats, driver comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote control, immobilizer with transponder, digital tachograph, cruise control, sun visor, reversing camera. Hydraulically driven, infinitely variable turbine, fully stainless steel tank, additional manual pump for raising the tank, weight indicator, operating hour counter, sweeping hour counter and water indicator (remaining volume 300 l), automatic water shut-off when the sweeping units are lifted and when reverse gear is engaged, acoustic warning in cab when tank is raised, 2 LED beacons + 2 LED work lights, sound insulation in equipment compartment, right/left sweeping unit, sweeping on both sides, dual sweeping system, sweeping width: 2300 mm / with dual sweeping system: 3940 mm, front rotary brushes with steel bristles Ø 700 mm, adjustable rotary brush angle (right and left via joystick), roller brush with mixed polypropylene and steel wire bristles L=1500 mm Ø 400 mm, spray nozzles for rotary brushes, continuous front spray bar with 6 nozzles, 3 nozzles per rotary brush, 6 nozzles at suction mouth, 5 nozzles on sweeping roller, water system for top suction shaft cleaning with external water connection, leaf grating in stainless steel, surface approx. 2 m², raising and lowering pneumatically with vibration mechanism, turbine wheel in 8 mm Hardox 700, housing dome in 5 mm Hardox 500, interior cleaning nozzles for turbine, 2000-liter water tank in AISI 316 stainless steel integrated in superstructure, filling via hose with backflow preventer, Wilden P1 diaphragm water pump, dry run safe, leaf suction unit at rear, reversing camera with monitor in cab, PM 10, broom and shovel holder, wired remote control.

Condition: used, maximum load weight: 5,900 kg, overall weight: 9,000 kg, axle configuration: 2 axles, first registration: 05/2020, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, loading space volume: 5 m³, Equipment: ABS, * ABS * 5-chamber rear lights * Height-adjustable towing device * Gigant axles * Front landing gear ----Superstructure: Low-loader trailer, loading height approx. 870mm, rear sloped, access height approx. 780mm, spring-assisted steel side walls left and right, wooden floor, lashing eyes and lashing rings. Spring-assisted and laterally adjustable loading ramps with hot-dip galvanized grating, slip-resistant design (length approx. 2,600mm), automatic rear support coupled with ramp operation, plastic toolbox in front of the bulkhead. Chassis, front wall, drawbar, rear wall, ramps and stakes hot-dip galvanized. Hedpfx Abjyncyhj Iek Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our General Terms and Conditions (see legal notice).

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, TOP workbench AT 4000 with beech worktop, mobile Stainless steel workbench AT 4000 with beech wood worktop bottom with storage grate drawer unit on the left Dimensions: 4000 x 800 x 900 mm (W x D x H) Used unit, cleaned Top sanded and newly oiled Hjdpfx Abjykifpj Iek We have more top-quality workbenches in stock!

Year of construction: 2024, condition: new, functionality: fully functional, New machine Stainless steel model 24 months warranty Advantages: Hsdpsivdxxjfx Ab Ijk + very good price-performance ratio + Machine is completely made of stainless steel (including the drip tray) + Chocolate grater in uniform thickness (0.1 - 3 mm thick) + grates 2 blocks of chocolate (up to 2.5 kg each) in no time at all + very easy to use + hygienic, easy to clean and keep clean + drive blade can be replaced separately + with speed regulation + appliance stands stable on 4 adjustable feet Professional tip from our master baker and confectioner: The chocolate should be tempered beforehand to obtain particularly beautiful, even chips: approx. 25 - 26°C: for dark chocolate approx. 23°C: for milk / white chocolate Technical data: - suitable for 2 blocks of chocolate (up to 2.5 kg each), - Dimensions for chocolate blocks (min - max): --- Width: 17 - 40 mm --- depth: 145 - 210 mm --- Height: 40 - 330 mm - Device dimensions: 393 x 370 x 638 mm (WxDxH) - Motor power: 90 W - Connected loads: 230V - 1Ph - 50Hz - Net weight: 30 kg

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Hjdpfx Aboykafgo Isk Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph 1-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane 3- Model : VSI 800 -CR Max Feed : 50 mm. Rotor Diameter : 1000 mm. / Off Std. Rotor/Closed Rotor Rotor Speed : 50-70 m / s. Drive : 180 kW / 1500 rpm. Capacity : 70-100 tons / hour 0-5 sand production at 5-50 mm feed. Total Capacity : 100-150 tons / hour VSI-900-CR 1. Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) 2. Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) 3. Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) 4. One-sided maintenance platform with ladder. 5. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance Crane 3-Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Hsdoym Arbopfx Ab Iok Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Volume: 97L Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3PH 400V

Condition: excellent (used), functionality: unexamined, Year of construction: 1914, operating hours: 9,999,999 h, motor manufacturer: Lanz, color: green, overall weight: 12,800 kg, total height: 3,500 mm, total length: 8,500 mm, total width: 2,200 mm, working width: 2,500 mm, machine/vehicle number: 1914, This is a Lan two-cylinder compound superheated steam traction engine with Lentz valve gear, injection condensation, and step grate pre-firing, built in 1914. The engine has been completely overhauled at the Sinsheim Museum and was last newly certified by TÜV in 1998. The sale price has been appraised by a DEKRA expert at €80,000.00 and above. The price is negotiable. Regrettably, I have to sell this fine piece because the owner of the hall has sold the premises. Hedpfx Abeymy Nkj Iok

Condition: new, maximum load weight: 36,461 kg, overall weight: 49,500 kg, axle configuration: 3 axles, total width: 2,480 mm, total height: 860 mm, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. Hjdpfx Abjw Dl Hwj Isk 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN). Grating flooring C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles with chequer plate covering. Two-Part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating flooring C40/5 (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections and hydraulic lifting system. Maximum load per pair: 40,000 kg In accordance with regulation 1230/2012/EU, ramps less than 300 mm in length do not count towards the vehicle length of 16,500 mm in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF as per manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display these data. Axles: BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with raise and lower valve. Axle tools included. Brake System: WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets. Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Steel frame made of high-strength fine-grain steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Tarp Structure: Tarp structure approx. 3,960 mm – Galvanized front wall with a tensioning mechanism for the sliding curtains. – “EDSCHA” roof, forward-sliding on aluminum roof rail profiles (bolted to front and rear walls). – 3 pairs of movable stanchions on the loading platform. – Body can be hydraulically widened at the rear by approx. 750 mm to the left and right. – Sliding roof with upward-swinging portal carrier. – Sliding tarp with 700 mm length reserve and tensioning straps at approx. 600 mm intervals. Height to top edge of structure approx. 3,960 mm (loaded). – Driving with open sliding roof is not permitted and will cause damage to the tarp. Painting: Entire steel structure is automatically shot-blasted after welding using a blasting wheel system. Second blasting treatment with corundum for optimal coating adhesion. Full metallizing of the entire chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection. Top coat with 2 layers of 2K finish, single-color in a shade of your choice according to the RAL 841GL standard. Rear section metallized and coated in RAL 9010 (pure white). No metallic paint.

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h Legal Gross vehicle weight: 49,500 kg / 31,500 kg Fifth-wheel load: 18,000 kg Axle load: 31,500 kg / 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm King pin trailing radius (rearwards) approx.: 2,100 mm Saddle height loaded approx.: 1,205 mm Hodeizu Ntepfx Ab Iok Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross vehicle weight depending on fifth-wheel load: Yes Special permit is required for exceeding country-specific regulations. Technical Description Gooseneck: Gooseneck in SNT Design for optimized loading platform length, length approx. 3,900 mm, rear with chamfer approx. 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Loading platform: Loading platform, length approx. 9,600 mm with rear chamfer approx. 900 mm x 6°. Loading platform behind the gooseneck hydraulically raisable and lowerable, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-part AXS steel ramps approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps can be hydraulically shifted individually by approx. 235 mm outwards and approx. 365 mm inwards. Maximum load capacity and approach angle per technical data sheet: C470319 Maximum ramp angle with lowered loading platform: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lift/lower valve. Axle tool kit. Tyres: 235/75 R 17.5 3PMSF twin tyres. Manufacturer of our choice Load index 143/141J (144/144F) Braking system: WABCO EBS-E braking system according to EU regulations. Without connecting cable to tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" version as per EU regulations. (ASS 3) Metalizing: Complete HRM metalizing (High Resistance Metallisation) Complete steel structure shot blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). Painting 6K final treatment: Complete steel structure shot blasted after welding. 1 coat zinc-based primer, 1 coat bonding primer. Final painting with 2 coats 2K (acrylic) single-colour in RAL shades of your choice, then cavity sealing with special wax. Rims in silver. Multi-colour and special painting at extra cost. Steel construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG welding process to EN ISO 4063. Protective gas M21 per EN ISO 14175 Front wall of steel, plug-in, approx. 400 mm high Connection board for supply lines to the tractor unit at the height of the outer frame profile. ASPÖCK-UNIBOX at the front plug connection board with sockets 24N, 24S & 15-pin. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. “Anderson” socket at the front connection board. Rema 78051-00 & Amp. 150 V. Cable for supply to electro-hydraulic unit and/or electric winch (35 mm²,

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 03/2027, total length: 550 mm, total width: 550 mm, total height: 1,100 mm, input frequency: 50 Hz, year of last overhaul: 2026, TOP Semmelmühle Breadcrumb Machine Grating Machine Simple, robust technology Output: 300 kg/h Stainless steel hopper Connection: 400V, 16A-CEE plug Dimensions: 550 x 550 x 1100 mm (W x D x H) Used machine, cleaned and tested With warranty and spare parts service Hodpfjv N Tb Uox Ab Iek Option: coarse sieve delivery service service package commissioning & instruction Many more TOP bakery machines in stock!

Condition: new, empty load weight: 600 kg, maximum load weight: 1,400 kg, overall weight: 2,000 kg, loading space length: 3,000 mm, loading space width: 1,550 mm, loading space height: 300 mm, tire size: 155r13c, Reverse tipper with leaf grate attachment from the manufacturer Cheval Liberte, also known as Debon. The high loader as a rear tipper can be easily loaded from the side and rear with a forklift or by hand thanks to the folding and removable side walls. The load can be tipped from this tipper trailer using an electro-hydraulic system. The car trailer is equipped with foldable and removable aluminium side walls, 55 cm swinging and removable corrugated grid attachment, steel floor, electric hydraulics with battery, automatic support wheel, lashing eyes, welded hot-dip galvanized frame and a V-drawbar. Trailer accessories such as a side wall attachment, tarpaulin and frame, flat tarpaulin, net, charger and supports are also available at an extra charge. --- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Hodpefr Uw Nefx Ab Iek Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: excellent (used), functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, Work table AT 4000 with beech wood top, mobile Hsdpfx Absyhzl Ts Isk Stainless steel work table AT 4000 with beech wood worktop undershelf with storage grate left side drawer unit Dimensions: 4000 x 800 x 900 mm (WxDxH) Used machine, cleaned Top sanded & freshly oiled We offer a large selection of work tables!

Condition: excellent (used), Year of construction: 2018, Mobile loading ramps, Butt, BKV 614 6 t – used – : Ex-site price: €12,500 (net) Manufacturer: Butt Model: BKV 614 Year of manufacture: 2018 Hedpexvh Hhofx Ab Isk Load capacity: 6,000 kg Driveway with grating With safety railings Condition: very good Available: from approx. January 2026, possibly earlier Location: Euskirchen

Condition: excellent (used), Year of construction: 2023, 2 x mobile loading ramps, Butt, BKV 1013, 10 t, front axle ramp for straight-line loading – used - : Price ex location: €14,950 (net), including loading! Manufacturer: Butt Model: BKV 1013 Year of manufacture: 2023 Load capacity: 10,000 kg Driveway with grating Total length: approx. 12,500 mm Total width: approx. 2,300 mm Track width: approx. 1,960 mm Lip width: 2,000 mm Lip length: 600 mm Length of the straight upper section: 3,200 mm Hedpfxjyhxkto Ab Ijk Ramp height at crossover, height adjustable: 1,200–1,650 mm With guardrail Condition: very good Available: immediately Location: 58710 Menden

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) Hjdpfx Asu R Dhxob Iek incl. center rail (chain drag) used, good condition *

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT45001013946, empty load weight: 12,100 kg, maximum load weight: 37,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 01/2025, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 3,200 mm, total length: 13,750 mm, total width: 2,550 mm, total height: 4,070 mm, suspension: air, tire size: 205/65 R 17,5 ", maximum speed: 90 km/h, color: blue, Year of construction: 2024, Equipment: tail-lift, The images shown are archive photos; the vehicle may still be in use! Jumbo Low Loader Chassis for construction machinery transport up to 36,000 kg and a maximum external machine width of 2,500 mm. Fifth wheel plate with replaceable 2" king pin. Rear slope approximately 1,500 mm long at 7°. Ramp shaft closed at top with steel/checker plate. Trailer B-dimension: 12,000 mm Free rear swing radius approx.: 2,350 mm Spare wheel carrier with 1 spare wheel Plastic toolbox In the low-bed: Omega rail laterally below the outer frame as a lashing bar for tarpaulin and spacer holders for lashing pins, not within the wheel area. Lashing Points: Gooseneck: - 5 pairs of lashing points recessed in outer frame, each rated at 5 t - 2 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t Low-bed: - 7 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t - 9 pairs of lashing points recessed in outer frame, each rated at 5 t - 3 pairs of additional folding lashing points recessed in the low-bed floor, each 10 t (1x before the drop, 1x in front of the 1st axle, 1x behind the 3rd axle) Hjdpeylkywsfx Ab Iok Axles & Suspension: - Drum brake axles - Last 2 axles self-steering - Air suspension with lift & lower valve + auto-reset function - Raise & lower function with quick release Wheels and Tires: - 205 / 65 R 17.5 for 8,000 kg axle load technical max. at 90 km/h - Steel rims twin arrangement Brake System: - 2-line air brake system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at front, without connecting line - Knorr EBS Electrics: - 2 pairs of double LED warning panels, extendable - 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front - 24 Volt, multi-chamber LED lights - Flashing side marker lights - Beacon with holder - Interior LED work light on front wall - 2 additional LED work lights at rear, switched via reversing light Floor: - Floor designed for maximum forklift axle load of 10,000 kg at minimum 300 mm tire width (note: deformation possible!) Stakes: - 3 pairs of sliding stakes, movable along entire length, with four insert sockets each; only the rear 2 zones are of equal length! - Stake positions: 1x gooseneck, 3x in low-bed Insert Slats: - 5 rows of wooden insert slats Access Ramps: - Ramp surface with "Mega Grip" serrated grating (max. forklift axle load 9,000 kg at min. 200 mm tire width) - Hydraulically operated via independent electric unit installed in stainless steel box front-right, including ramp control; additional operation via radio remote control incl. rear support operation, customer's responsibility! NATO socket on truck required, including connecting line to truck as spiral cable; connection line must NOT be connected while driving! Truck not included. - Steel ramp full width, approx. 3,300 mm long + 3-part aluminium foldable section approx. 900 mm for total ramp length 4,100 mm; if necessary, additional phenolic board max. 9 mm thick under aluminium sections for reduced ramp angle; ramp load capacity 26,000 kg, heavy-duty version; over ramp shaft steel/checker plate; ramp secured during transit with top link. Exact specification available on request!

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Hedpfoyk Sgcjx Ab Iok

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan Hjdpfx Abeygtnas Ijk • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 23012209, This is a 2-burner stove from the premium manufacturer MKN, model Optima 850, year of manufacture 2023. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The stove is in very good used condition. You will receive an invoice with VAT shown separately. The manufacturer's recommended retail price (RRP) is €5,780 net. Our used equipment service for you: • 6-month warranty on all electrical components • High-quality branded appliances at fair prices • Professional refurbishment/inspection & expert cleaning • Tested & fully functional – or your money back • Flexible choice of shipping or pickup • Expert advice – before and after your purchase • Provision of operating manuals, connection diagrams & spare parts Technical data: Hjdpfjxb Agtex Ab Isk • External dimensions (W x D x H): 400 x 850 x 700 mm • Type: Optima 850 Type 2063401 • Model: 2063401 • Year of manufacture: 2023 • Serial number: 23012209 • Weight: 47 kg Condition: Used, comprehensively inspected, fully functional Further specifications: • C-burner 3.5 kW (front), E-burner 7.0 kW (rear) • DN 20 (3/4") gas connection required • Heavy-duty removable cast iron grates • Open base with adjustable stainless steel feet Features: Atmospheric burners, pilot burner, thermoelectric safety device, universal gas valve, shut-off valve Nominal heat load: 10.5 kW, natural gas 20; 25 mbar or LPG 30; 37; 50 mbar Shipping: • Delivery or pickup by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by prior arrangement

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 627 kg, maximum load weight: 2,073 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2 Rear Tipper BRAND-NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading platform height: 66cm Total weight: 2700kg Payload: 2073kg Braked tandem trailer Overrun and handbrake by KNOTT 2 x 1350kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile drop sides with tension locks Drop sides fold down and are removable on all sides 15mm thick, anti-slip, heavy-duty phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg nose weight capacity 6 noise-reducing lashing rings with 800kg tensile force Reinforced 13" C-type tyres with steel valves M+S tyres Net/rope hooks on the frame 13-pin connector plug Front LED marker lights Rear lights with reversing light, fog light, and triangular reflectors Upper frame mounted on rubber supports Large rear tipping angle of 51 degrees Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without drop sides (discount) - Increased drop side height to 35cm - Black Edition (powder-coated sides and rims in black) - Integrated loading ramps 2800kg - Electric tipper operation - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump for use with electric operation - Safety supports for maintenance work when vehicle is tipped - Foldable crank rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf grating in various heights, also closed - Side wall extensions 30cm with tension locks - Flat tarpaulin with or without hoops - High tarpaulin 160cm or 180cm Further accessories available on request! Price plus shipping to Gera and vehicle registration document: €200 net Pictures are examples and may show optional, surchargeable equipment. Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate collection. Our workshop is open for all types of repairs from 8:00 - 17:00 on weekdays. Hjdpoghpcaefx Ab Iek Specialist for axle repairs, also for caravans. Large selection of rental trailers. Additionally, we offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or drop by in person.