Used Good Condition for sale (44,495)

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Machine no.: 20 192 Voltage: 230/400 V Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Operating pressure max.: 8 bar Ljdpoy D I R Sefx Abzsag If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, Robust Hombak surface planer in a heavy-duty, solid cast iron construction. The machine features a planing width of 510 mm, an approximately 2,500 mm long planing table, and a 2-knife cutterhead. The fence is adjustable. The electrical system has been overhauled – the machine has a new switch and new wiring. A spare cutterhead including knives is also included and is part of the scope of delivery. Technical data / Features Manufacturer: Hombak Machine type: Surface planer Year of manufacture: 1980s Planing width: 510 mm Table length: approx. 2,500 mm Cutterhead: 2-knife cutterhead Laodezz Hd Aopfx Abzeg Dust extraction port: Ø 140 mm Construction: heavy-duty cast iron Fence: present, adjustable Connection: 400 V / CEE New switch New wiring Spare cutterhead incl. knives: present The machine is in used condition with signs of wear corresponding to its age. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Technical data and features may vary. Errors, prior sale and changes reserved. All information without guarantee.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used BRANDT KD 68 CF Optimat edge banding machine from 2001. The machine is equipped with several processing units for complete edge processing. Among other things, it features pre-milling units, trimming units, radius milling cutters, corner copying devices, and pull knives for radius and surface finishing. Technical data / Equipment Manufacturer: BRANDT Type: KD 68 CF Optimat Year of manufacture: 2001 Machine no.: 0-261-02-8154 Control system: BRANDT NC 9 Feed speed: approx. 11 m/min Edge thickness: up to approx. 40 mm Voltage: 400 V Ledpfx Aszxy Nyebzsag Frequency: 50 Hz Control voltage: 24 V Equipment: BRANDT NC 9 control system Pre-milling Trimming units Radius milling Corner copying Pull knives for radius processing Surface pull knife pneumatically controlled units Roller magazine / edge feeder Workpiece transport via feed chain Dust extraction connections on the processing units Central control via control panel Emergency stop The machine is currently still at the customer's site but would be immediately available! Transport is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Year of manufacture: 1990 Laedpfx Abov Im Swszeg 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Good condition – machine has been inspected Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: good (used), functionality: fully functional, For sale is a used miter saw/undercut miter saw from the manufacturer Irion & Denz Maschinenbau, Lörrach. The machine is equipped with pneumatic saw blade travel, two-hand operation, and spacious roller tables and is suitable for efficient cutting and mitering of wooden workpieces. Technical data/equipment: Manufacturer: Irion & Denz Maschinenbau Place of manufacture: Lörrach Machine type: Miter saw / Undercut miter saw Max. saw blade diameter: 500 mm Max. cutting height: 100 mm Max. cutting width: 330 mm Saw blade travel, pneumatically controlled, continuously adjustable Cutting activation via two-hand operation Pneumatic workpiece clamping Adjustable workpiece stops Extension tables with free-rolling or powered rollers Spacious roller conveyors for longer workpieces Robust industrial design Additional equipment: Stop with electronic positioning Length measurement input via keyboard or length optimization Electronic positioning/length optimization currently defective Ledezymwmjpfx Abzjag The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's site, but would be available shortly. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: good (used), functionality: fully functional, Segura 117 metal bandsaw - Tiltable table - Equipped with Ideal bandsaw blade welding device - Very heavy-duty design - Speed regulation Due to the age of the used machine, warranty is excluded when sold to commercial customers. Lajdpjygmztsfx Abzeg

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Laodpfx Abozfilwszeg Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Painting booth wall Schuko - 350 Ø - 1750 x 2000 mm - Year of manufacture: 1989 - with side deflector plates - throttle valve in good condition - fan dimensions: 800 x 1330 mm, height 600 mm Transport available at extra cost! Ledpjytwlcsfx Abzjag Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: used, Internal combustion forklift, gas-powered forklift STILL model RX 70-16T Serial No. 517314G00021, Year of manufacture 2016 Rated load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carriage width 980 mm Laedpjinldwefx Abzog Overall height 2160 mm Overall width 1100 mm Overall length without forks 2200 mm Self-weight 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic side shifter - Internal combustion electric drive - 4-cylinder Volkswagen internal combustion engine with 30 kW - Hydraulic power steering - Work light at the front - Rear warning light (blue) - Warning flashing light at the rear (yellow) - 4-wheel superelastic, solid rubber tires, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for starter battery, maintenance charger VICTRON - New TÜV inspection and UVV certification (surcharge 150 EUR net) in good condition

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 Lsdpfoygm Aksx Abzoag - 2100 / 3800 rpm - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Table milling machine TF900 - Year of manufacture: 1993 - 380 Volt Lsdpfx Absygm D Uszsag - 3 speed settings - good condition Transport possible at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: good (used), functionality: fully functional, Velox 350 crosscut saw with roller conveyor approx. 5000 mm Laodpfx Abjt Ta Urjzog Machine ready for immediate use 1.5 kW, 380 Volt 2 speeds Double mitre cuts possible Transport available at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: good (used), functionality: fully functional, with heating wire, outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Ledeyayzaopfx Abzoag Transport possible at extra cost!

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. Laedezvdk Aopfx Abzsg In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Band saw 800 mm roller diameter Cutting height 470 mm Cutting width 780 mm Lodpfx Abovf Hh Hozeag Robust cast iron stand Longitudinal stop, upper roller guide Built-in motor, saw blade ø 250, 40 teeth Motor 4 HP / 2.9 kW / 380 Volts Weight 800 kg Height 2400 mm The machine will be inspected before sale. For used machines with a manufacturing year of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: like new (used), *3. COMMERCIAL OFFER SHEET - KARCHER B 90 R* --- *1. EQUIPMENT DESIGNATION* *Type*: Battery-powered, ride-on floor scrubber *Brand / Model*: KARCHER Professional B 90 R Bp Pack *Year*: Estimated 2012-2014 *Serial Number*: ..... *2. TECHNICAL SPECIFICATIONS* Item Detail Working width 90 cm, 2 disc brushes Performance 5400 m²/h Tanks Clean water 140 L / Dirty water 140 L Power supply NEW 6V batteries 06/2026 Operating time 3h30 to 4h *3. GENERAL CONDITION & READINGS* Inspection point Reading Comment Hour meter 58 h Almost new condition Lodpfezbvrdox Abzsag Batteries New 06/2026 Invoice provided Brushes / Squeegee Good condition 80% remaining wear Operational test OK Suction, traction, and scrubbing validated

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Lasdozzlh Hspfx Abzjg Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, -45/+45° tiltable, electric height and swivel adjustment Left/right, 6 speeds Aigner fence 2 x 500 mm, digital readout on the spindle fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price: €18,700 Available around September 2026 Laedoykar Hspfx Abzog Shipping available at extra cost!

Condition: used, Year of construction: 1985, functionality: fully functional, Scheer DB5 line boring machine - Year of manufacture: 1985 Laedpfxjwv Uy De Abzeg - 380 Volt - 21 spindles; 32 mm pitch - stop ruler - various dowel drills - portal clearance: 1056 mm - 2.2 kW Transport available at extra cost!

Condition: used, Year of construction: 1989, operating hours: 8,341 h, 1989 | Atlas Copco QAS-85 | Used Generator Set | 8341 hours 📍Location: France Lsdpfx Aez Ebuuobzjag 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 17 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. Caution, 1989 machine without CE marking and without sockets equipped with protection against overloads, short-circuits, or leakage currents. Plan connection on the busbar set. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41430 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm Lajdjwv Uq Aopfx Abzog - Feed speed: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Laedjzzmw Nepfx Abzjg Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: good (used), Year of construction: 1988, functionality: fully functional, For sale is a robust and reliable Scheer DB5 dowel drilling machine / multiple-hole drilling machine for professional use in carpentry workshops, joineries, and in the furniture and interior design industries. The machine is ideally suited for precise dowel drilling and multiple-hole drilling in solid wood, chipboard, MDF, and other wood-based materials. Thanks to its robust industrial design, pneumatic workpiece clamping, and precise guide systems, fast, accurate, and consistently repeatable work is possible. The Scheer DB5 impresses with its ease of operation, high precision, and durable construction, making it ideal for daily use in the workshop. Technical data: Manufacturer: Scheer Type: DB5 Year of manufacture: 1988 Voltage: 400 V Pneumatic workpiece clamping Digital dimension display Adjustable stops with central adjustment Includes drill bit Precise linear guides Operation via foot switch Dust extraction connection available Robust steel construction Undercarriage with rollers Application areas: Dowel drilling Multiple-hole drilling Furniture construction Interior design Window and door construction Carpentry Joinery Series production The machine can be inspected and tested under power after prior appointment. Transportation is possible for an extra charge! Laodpozr Egkofx Abzjg The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: used, Rotary vane vacuum pump Manufacturer: Becker Ljdebnhmiopfx Abzsag Type: U 4.250 SA/K Motor: DS 400V Suction capacity: 250 m³/h Ultimate pressure: 3 mbar (abs.) Condition: very good. Overhauled Oil type: Mineral oil Warranty: 12 months Delivery time: in stock

Condition: good (used), Year of construction: 1966, Spindle moulder type 54F, year 1966, V-belt drive, reversible (left/right rotation), 4 spindle speeds, 30 mm spindle, 3 kW, transport dimensions 940 x 780 x 1200 mm, weight 480 kg. Transport available at extra cost! Lsdpsy E Nuhsfx Abzjag