Used Gmx 250 for sale (10,376)

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Manufacturer: Manitowoc, crane rope Ø 17 mm -Length: approx. 250 m -Item No.: 03120320 D17 x 250M -Price/Fee: complete Bedpfsmzkhnsx Amrsln -other crane ropes also available -Transport dimensions: Ø 700 x 600 mm -Weight: 420 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Röhm, three-jaw chuck with clamping plate -Mouth size: Ø 250 mm Bsdohbwc Ajpfx Amrsln -Passage: Ø 76 mm -Mounting plate: 500 x 310 mm -Overall dimensions: 500/310/H300 mm -Weight: 72 kg

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm Blsdpjhb N Alsfx Amrjn -Weight: 61 kg

Condition: new, Year of construction: 2026, Table design: -High performance -Belt sanding unit with adjustable height from 0-90° -Maximum usable surface area for surface sanding -Belt adjustment with fine adjustment Combined belt/disc sanding machine -Longitudinal guide for material guidance -Perfectly balanced and with low vibration -Connection on both sides for dust extraction, Ø 50 mm -Motor protection switch with undervoltage release -Fixed stop -1 sanding belt standard (brown), grit 80 -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester -Connection cable with CEE plug Bjdohhiaaepfx Amreln Additional cost for special equipment/option: - Machine stand, emergency stop button, brake and dust extraction / €2,260 (item 330.370) - Machine stand, emergency stop button and brake / €1,030 (item 330.365) - Machine stand with water immersion container / €360 DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm Blsdpfehikzlex Amren -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 Bledpfxeg Rcy Te Amren -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 -Weight: 24 kg

Year of construction: 2021, operating hours: 2,235 h, condition: used, used screwcompressor immediately available: variable RENNER RSF 250 D - (6 to 8 bar) frequency-controlled, direct-driven screw compressor with RENNERtronic control with REflex control - adjustable pressure range 6 to 8 bar Hours: 2235 h Pressure: 6 to 8 bar Nominal output: 250 kW Quantity delivered: at 6 bar: 12.13 to 49.30 m³ / min at 7 bar: 11.80 to 44.50 m³ / min Sound level: 84 dB (A) Compressed air outlet: DN 100 Dimensions length x width x height: 3663 x 2100 x 2338 mm Weight: 5530 kg Year: 2021 Bodpeh Rvpksfx Amreln Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Bsdpfx Aed Tyaaomreln Will be shipped within Germany for €90.00 net.

Condition: good (used), 130 linear meters of shelving system from Schäfer, type R3000 Used, like new, see pictures. Height: 2.5 m Depth: 80 cm Load capacity per shelf: 250 kg Field width: approx. 128 cm Negotiable price: €26,800 net ex warehouse The offer includes: Bedpfxod Nftxo Amreln 101 pcs. uprights or frames, 2.5 m, galvanized 600 pcs. shelves, 250 kg load capacity per shelf, galvanized 34 pcs. cross braces for bracing. 6 levels per field (more levels are possible for an additional charge) Also available with a field width of 100 cm! Other configurations are possible. Heights of 2.5 m or 3.5 m are available. The goods are in stock. Transport and assembly are possible upon request. Inspection possible at any time by appointment. Further information on request. We have over 5000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & heavy-duty shelving used & new Description: Are you looking for high-quality storage shelves to buy? With around 100 of our own employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether it's pallet racking, heavy-duty shelving, high-bay racking, shelving systems, tire racks, or shelving for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Flat-rate purchase: Purchase of merchandise, equipment & complete inventory including a thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of customers. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, TECHNICAL DETAILS - axes number : 3 Bjdouhbfyjpfx Amrjln CAPACITY - machining diameter : 250 [mm] - travels (X/Z) : 1600 / 300 [mm] - rapid feeds (X/Z) : 60 / 30 [m/min] SPINDLE - spindle nose : DIN55026 - size 6 - power : 18 / 22 [kW] - torque : 202 / 250 [Nm] - speeds : 0 - 6.000 [rpm] - indexing precision axis C : 0,001 [°] TURRET - number of positions : 12 - tool holders : VDI40 - number of rotary positions : 12 - rotary tools speed : 6.000 [rpm] - rotary tools power : 8,5 [kW] MILLING HEAD - number of spindles : 6 - 5 HSK 50 spindles upon Ø : 107,95 [mm] - 1 HSK40 spindle : at center ELECTRICAL SUPPLY - voltage : 400 [V] - installed power : 45 [kW] DIMENSIONS - floor space : 4.550 x 2.810 [mm] - height : 3.600 [mm] - weight : 10.000 [kg] EQUIPMENT - control CNC SIEMENS 840D-sl - 3 colors status lamp - linear scales : HEIDENHAIN - automatic part loader with conveyor - chips conveyor - coolant tank * with pump 10 bars * with washing gun - coolant through spindle - IFS mist separator - collection of parts supports - collet chuck - 3 live tool-holders

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Bljdet Hwzpepfx Amron Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Also available as monorail with elbows and points! Mounting height variable System can be supplied complete Blodjct Dhaspfx Amrjn KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Very good used condition Rails available in yellow or red! Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich info ÄT mobatgg . de

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) Bjdpfszxtz Nox Amroln - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Bsdpfx Amszu Nyasroln Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Year of construction: 2013, condition: excellent (used), HewSaw SRC200/250 Bodpszwnbhjfx Amreln

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 02-2026, total width: 2,100 mm, total length: 2,100 mm, total height: 900 mm, overall weight: 800 kg, operating pressure: 60 bar, table height: 770 mm, Work table with pivoting mechanism AWT-250 S – easily bring components to the desired working height with head pressure, without any force, and tilt and rotate them using the integrated pivoting mechanism. Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting. Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg. Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically. The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom. Bodezwhaqjpfx Amrsln The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side. The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing. In the folded position, the open angle is approximately 32° vertically.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Bjdezw Ucxopfx Amreln Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Bljdpfxozw Ug Rj Amrsn Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, Clean air extraction HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -ge Air filtration via filter bags, Motorized cleaning, Dust tested, Mobile collection bin ----- Technical specifications ----- Bodpfx Ajy R Upzemreln Extraction nozzle Ø: 250 mm, Nominal air flow: 4,241 m³/h, Minimum air flow: 3,534 m³/h, Number of collection bags: 3 pcs, Motor: 4 kW, Dimensions (LxWxH): 2,500x1,280x2,500 mm, Weight: 630 kg

Year of construction: 2006, operating hours: 40 h, condition: used, functionality: fully functional, machine/vehicle number: Seriennummer: 4292-1-197652, Gerstenberg Schröder Consistator MD 250 L-S For sale is a used Gerstenberg Schröder Consistator MD 250 L-S scraped surface heat exchanger from a production facility. The unit was used for processing vegetable juice and is being sold due to process changes and restructuring. Technical Data Manufacturer: Gerstenberg Schröder Type: Consistator MD 250 L-S Year of Construction: 2006 Serial Number: 4292-1-197652 CE Marking: CE 0038 Design: Scraped Surface Heat Exchanger Product Side Medium: Vegetable juice Pressure Range: 0 / 35 bar Test Pressure: 59 bar Max. Temperature: 150 °C Volume: 25 liters Media Side Medium: Steam Pressure Range: 0 / 13 bar Test Pressure: 28 bar Blsdpfxszwwibe Amrjn Max. Temperature: 165 °C Volume: 75 liters Condition The machine is used and comes from an industrial production environment. Inspection is possible by prior appointment. Location 71106 Magstadt, Germany Sale Sale from location / Ex Works. Loading and transport are to be arranged by the buyer, or can be arranged upon agreement. If you are interested or have any questions, further information, pictures or details can be provided.

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Bedpfszr H E Uox Amrsln Worktable 250 x 500 mm. Magnetic chuck 250 x 500 mm. Maximum table load with magnetic chuck: 180 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 200 x 20 x 31.75 mm. Spindle motor power 2.2 kW. Total machine power 3.7 kW. Surface roughness up to Ra 0.63 µm. Includes: coolant system, magnetic separator, hydraulic station, lubrication, magnetic chuck, PLC controller, and touchscreen. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Another model with a larger worktable is available: the SMP3063AHD (635 x 305 mm) and costs €22,000.

Condition: used, Year of construction: 2026, In use with the Lehnhoff MS03 system WVE.250 Roller width 250 mm For excavators from 1.5 t to 7 t Roller diameter 600 mm Overall height without adapter 650 mm Blsdpszw Ngxofx Amron Weight 190 kg What is a compaction roller used for? A compaction roller on an excavator is primarily used to efficiently compact soil, trenches, slopes, and backfill in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Safety: No personnel need to stand directly in the trench. Important areas of application and functions: Trench construction + pipeline zones: Compacting soil in the trench, especially around pipes, without damaging them. Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Gardening and landscaping: Soil compaction in narrow or difficult areas. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter

Condition: excellent (used), functionality: fully functional, Intermediate conveyor belt / WEINIG, type LTB 250-3500, serial number 81005, year of manufacture 1997 - Length 3500 mm - Width 250 mm - Height 820-1000 mm - Feed rate 20 m/min Blsdpszxpfkjfx Amrsn - Anti-slip plate 3000 mm - 2x pneumatic glass strip ejectors In very good technical and visual condition.

Year of construction: 1997, condition: used, Specification Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length Bledjzw D I Rspfx Amron 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Type: AKF 250L Motor: 400V, 2.2kW Speed: 2800 rpm Arbor diameter: 250mm Arbor shaft diameter: 40mm Cutting width: 300mm Cutting depth: 85mm Profile height: 160mm Bjdszvz Dyjpfx Amrjln Weight: approx. 150kg Dimensions (W x H x D): 950 x 1450 x 930 mm