Used Gmx 250 for sale (18,163)

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Nsdewzvzyspfx Af Eolh Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: good (used), We offer you here a used shelf connector of the manufacturer SSI Schäfer for sale. Technical data of the shelf connector: Manufacturer: SSI Schäfer Included in the scope of delivery: 01x shelf connector used material colour: blue Shelf spacing: approx. 250 mm L-profile: approx. 40 x 40 mm Weight/pc: approx. 0.536 kg/pc. 02x hexagon head screws, M8 x 20 8.8. 02x hexagon nut, M8 Nodsd Ttz Rspfx Af Eslh 02x washers, M8

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Delivery scope: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening materials PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €2,711.50 net, plus transportation and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €4,756.00 net, plus transportation and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €6,659.80 net, plus transportation and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €8,662.00 net, plus transportation and VAT. Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €8,381.70 net, plus transportation and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €12,162.50 net, plus transportation and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €15,136.80 net, plus transportation and VAT. Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €22,782.72 net, plus transportation and VAT. Further variants available upon request. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & TAILOR-MADE PRODUCTION This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended area of application. Our planning department will provide you with an individual, non-binding quotation based on your specifications. Whether for new construction, expansion, or modernisation of existing systems – we support you with sound technical expertise and practice-oriented solutions. Nljdpjxdvhpjfx Af Ejh TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the order and can be requested from us individually. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price is stated per unit/excluding VAT, or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We continuously offer attractive used deals from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), For sale: a robust hydraulic press from the renowned manufacturer Vogel & Co Pressenfabrik Berlin-Borsigwalde. Model: 40×250 Machine number: 1715 Maximum pressure: 40 tons Oil capacity: 150 liters Nledpfx Afsw Rc Hme Ejh The machine is in good technical condition, complete, and comes with a control panel. Sturdy, stable construction – ideal for industrial applications in pressing, forming, or assembly. Electric power supply, hydraulic drive. Mounted on a pallet for easy loading. Condition: used, fully operational, with normal signs of wear.

Condition: excellent (used), Year of construction: 2015, Durst P10-250 Corrugated / Sign Nedpfew Uz Nnjx Af Ejlh under full Durst Germany service Year: end of 2014 (production in 2015) Colors: 6c, 10 pl - 1000 dpi resolution Speed up to 240 m2/h Print width: 250 cm 2-4 tables Options: - Automatic registration table for multi-loading boards - Caldera RIP software

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. Nlsdpfew Uf Tkex Af Eoh The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - working cylinders x 4 Nedpfx Ashktq Asf Eslh - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: used, Your contact person in our home Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you here a used studs for roller conveyors for sale. When placing the order the required stand height & stand depth please! Included in the scope of delivery: 01 x used studs, Material color: completely galvanized Stand height: 250 mm to 700 mm (freely selectable in turn) Stand depth: 300 to 700 mm (freely selectable in turn) More treble & bass can be customized on request. Our services at a glance: (Prices on request) Nsdpfxedf S Eyj Af Ejlh -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge) Free shipping on request!

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Nljdpovzkylsfx Af Eeh Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! Nlsdpfx Aovdptvof Eoh *Installation and Operator Training FREE FABO manufactures and installs stationary type stone screening & washing plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 150-250 Tons/hour capacity of Washing and Screening Plant: - Riverstone Feeding Bunker - 2000x6000x4 Decks Vibrating Screen with washing system - 800x8000mm Screw Washer - Conveyor Belt System - Control Panel and Automation System FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Technical characteristics Power and Motors Power: 1.5 Kw Overall dimensions Nodpotv Tkyofx Af Eslh Lenght: 560 mm Width: 730 mm Height: 410 mm

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, number of shelf rows: 10, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment Nlodpfov Uqwdox Af Eeh - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 70 mm for shelf distance: approx. 250 mm dim. head plates: 130 x 60 mm profile dim.: U 62 x 45 mm Weight: approx. 1,660 kg | pcs. Nlodpfoi Hpkxex Af Esh General information about the article: This article is offered for pick-up only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, type of input current: AC, overall weight: 1,090 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 250 kVA, Equipment: type plate available, Oil transformer according to Ecodesign Directive (Tier 2). The transformer has not been in operation so far. Njdpfxswnfgfo Af Ejlh 12 month warranty

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Nodpfx Ajwbp Eref Eolh -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), The scope of delivery includes: 01x shelf connector, used for shelf distance: approx. 250 mm total length: approx. 330 mm Nledsi Dfizepfx Af Ejh cross section: U 30 x 52 mm Material color: blue weight: 0,46 kg | pcs.

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: Nsdpfemqk Svjx Af Ejlh 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: sendzimir galvanized L-profile dim.: (see below) 298 x 81 mm (4 round holes Ø 9 mm) 250 x 30 mm (one oblong hole) center-center round hole: 278 | 50 mm shelf distance: approx. 250 mm Weight: approx. 0,600 kg / pc. Nlsdpfxji Dtcnj Af Eeh 04x hexagon bolts, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8 General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt Nsdpfxsu Ekfme Af Eslh • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, functionality: fully functional, machine/vehicle number: 462958, Temperature control device for plastic injection molding applications and industrial applications up to 250 °C. Technical specifications: Voltage: 400 V Power: 13.7 kW Current: 21 A Volume: 11 liters Flow temperature: 250 °C Frequency: 50 Hz Dimensions: 88x32x96 cm Total weight: 150 kg The Regloplas temperature control device model 250/12/F30/1K/RT45 offers a reliable and precise solution for temperature control in industrial applications. With its compact design, it is ideal for use in tight spaces without sacrificing performance. The device combines advanced heating and cooling systems that enable precise control of the process conditions and thus contribute to the quality assurance of your products. The intuitive control ensures easy operation and adaptation to different requirements, while the robust design guarantees a long service life. With fast response times and efficient energy use, the 250/12/F30 not only optimizes your production processes, but also helps reduce operating costs. Nsdpjvc Dpcefx Af Eelh

Condition: used, Technical details: grinding diameter: 550 mm grinding length: 2600 mm centre height: 250 mm Nlsdpfx Ajw Rktbjf Esh swing diameter: 500 mm grinding wheel diameter: 750mm,Breite 80mm , Bohrung 304,8mm mm coolant device: 90 l/min weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: used, Year of construction: 1988, pressure 400 t Nsdpfx Aovuuknef Eelh distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control Nedpfx Afju N Ddws Eslh - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Year of construction: 2004, material width 250 mm coil weight 2 x 3,0 t material thickness 1,5 - 6,0 mm coil internal diameter 470 - 530 mm coil external diameter 1800 mm material cross-cut 6,0 bei BB100 / 3,8mm bei mm² no. of straightening rolls 21 straightening roll diameter 30 mm number of draw-in rolls 4 Nedpfx Asvut Uljf Eelh speed - 20 m/min power requirement 18,0 kW Weight 4,2 t Dimensions (WxDxH) 2,4 x 2,7 x 2,6 m Weight 2,40 kg dimensions (WxDxH) 2,0 x 2,1 x 2,2 m Decoiler AH 3000/2/250/ST with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting Straightening machine RM 3025.4/21 with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls coil loop control via ultrasonic