Used Glass Edge Grinding Machine for sale (66,575)

Condition: used, Storage location: Sonnefeld Bwodpfeway Dcex Alben

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Bwedjvvkd Tepfx Alben

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bsdpfsvvkfdex Albswn

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Bsdpfovvkfqsx Albown Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Bwjdpfx Aovvkfwjlbon Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Bedpjxyiilofx Albewn

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bjdpfx Aljvvkipsbown

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Bsdpfx Aswhqprslbown

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Bwjdpfewhqplsx Alben

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Bjdeymcrbopfx Albjwn Storage location: Nattheim

Condition: good (used), functionality: fully functional, Jung F40 sinusoidal magnet, 300 x 150 mm Bwsdpfxezbbklj Alben cooling water tank 9x grinding disc documentation the machine is powered on for inspection.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Jung JF 520 D Bedpozba Ngefx Albjwn year of manufacture 1988 magnet 500 x 175 mm max. grinding area 600 x 220 mm variable speed variable magnetic field strength automatic start diaform coolant/filter tank 3 x flange 1 x clamp documentation machine is powered on for inspection

Condition: new, The KF 200 is a robust Edge Beveling Machine from KNUTH, designed for efficient chamfering, deburring, and 45° beveling of steel, aluminum, and a variety of other materials. Its compact dimensions and simple operation make it particularly well-suited for large workpieces, including heavy metal sheets and long profiles. With tungsten alloy blades, the KF 200 offers superior tensile strength, hardness, and longevity, ensuring that demanding tasks are executed with precision. This machine operates at a speed of 3,500 revolutions per minute and can achieve chamfer heights ranging from 0 to 5 mm, making it versatile for different applications. Standard equipment includes a set of cutting inserts and an operator manual, allowing you to start working immediately. Whether you're preparing weld joints or performing intricate deburring tasks, the KF 200 stands out in the Edge Beveling Machines category. To enhance your production capabilities, request a quote today and elevate your sheet metal processing with KNUTH. Bwjdpfoq Ny R Sex Albjn

Condition: new, The HFS 52 NC, a robust Conventional Surface Grinder from KNUTH, stands out in the Grinding Machines category for its advanced grinding capabilities. This machine is tailored for automatic and semi-automatic surface and flute grinding, offering an impressive grinding area of 520x200 mm. With easy programming via a touchscreen, operators can expect precision and efficiency, which are further enhanced by the automatic grinding wheel dressing mode that integrates seamlessly into machining cycles. Designed for continuous operation, it features dual guides for unwavering linear motion, servo drives for precise adjustments, and a heavy-duty spindle head with maintenance-free bearings. Furthermore, the HFS 52 NC excels in its thermal stability, aided by an external hydraulic unit and an efficient cooling system. Whether for repair workshops or series production, this machine accommodates diverse operational needs. For those looking to elevate their machining process, we invite you to order online and experience the advantages of the HFS 52 NC in your own facility. Bwsdsq R Slgopfx Albjn

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2053, For sale is a used DDS 750 XR rotary surface grinder, manufactured in 2002. Bwedpfx Asza Thtelbjn The machine's IONIOC measuring system controller is defective; otherwise, the machine is in working order. Inspection under power is possible at the Remscheid location.

Condition: ready for operation (used), Number of axes: 3, operating hours: unknown, with control system, belt filter, and extraction unit, without documentation or spare parts, not maintained on a regular basis, without maintenance records. An on-site inspection is possible. Bwodpfx Ajza E Rtelben

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Bedpfx Asyvfwrjlbewn Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Edge sanding machine Gartner FLK 4 - used - including mitre fence ----- Technical Data ----- Sanding belt width: 200 mm, sanding belt length: 2,350 mm, worktable dimensions: 870 x 400 mm, belt speeds: 4, extraction nozzle Ø: 80 mm, motor: 3 kW Bodexd U Uhopfx Albjwn

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Bedpfxjy T D N Aj Albswn Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): Bwjdpevxkv Uefx Albjn - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Bsdpfju R S Erex Albewn Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation Bjdpfx Aju R Sy Aolbown - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: new, Minimax ME 35 TR S Holzkraft Edge Banding Machine -Exhibition Machine- Bjdpfx Aljv Nhhpsbjwn This offer is an equipment package. The following items and options are already included in the price: - New exhibition machine -

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, Bwedpju R S Nwjfx Alben operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2008, operating hours: 23,600 h, functionality: fully functional, machine/vehicle number: 632025, TSCHUDIN T35 – CNC High-Precision Cylindrical Grinding Machine with Siemens Sinumerik 840D Year of manufacture: 2008 · Machine No.: 632025 · Approx. 23,600 spindle hours · Incl. SECKLER production cell, STREULI filtration system, DITTEL unbalance measuring device TECHNICAL DATA • Manufacturer: HTT KELLENBERGER (now Hardinge / L. Kellenberger & Co. AG) • Model: Tschudin T35 / Siemens • Machine No.: 632025 (original nameplate) • Circuit diagram: E-632025 • Year: 2008 • Control: Siemens Sinumerik 840D with grinding software • Travel paths: Z 600 mm / X 350 mm • Supply voltage: 3 × 400 VAC, 50 Hz • Control voltage: 24 VDC • Connected load: 16 kVA • Weight: approx. 6,400 kg • Spindle operating time (machine ON): approx. 23,600 h • Centre distance (machine class): up to 400 mm • Centre height: 175 mm • Max. workpiece weight: 150 kg • Grinding wheel diameter: 400 – 600 mm • Guideways: Hydrostatic • Max. cutting speed: up to 120 m/s (ball bearing variant) INTEGRATED AUTOMATION & AUXILIARY SYSTEMS • SECKLER robot magazine – autonomous production cell (robot loading, workpiece magazine, sorting conveyors for good / SPC / scrap parts) • DITTEL M5000 unbalance measuring device • STREULI filtration system MZ 150 (year 2005, fine filtration) CONDITION & HIGHLIGHTS Used machine, fully functional • Siemens Sinumerik 840D with grinding software • Hydrostatic guideways – precision class • Autonomous SECKLER production cell • Integrated DITTEL M5000 unbalance measuring device • STREULI MZ 150 coolant filtration system • Regular maintenance documented by Johnson Controls (last in 2024, next due 04/2025) • Removed from ongoing serial production at a precision parts manufacturer ABOUT THE MACHINE The Tschudin T35 is a modular production external cylindrical grinding machine for medium and large series. Originally developed by Swiss company HTT Hauser Tripet Tschudin AG, now under the Kellenberger/Hardinge Group. The offered machine was operated in conjunction with a complete SECKLER production cell – fully automated 24/7 operation is possible. The Siemens Sinumerik 840D control system features grinding software developed by grinding specialists and allows optimal programming of grinding and dressing processes. The hydrostatic guideways guarantee highest precision in series production; the ball bearing variant allows cutting speeds up to 120 m/s. Bwodpfxoy Eqiqo Alben SCOPE OF DELIVERY • Tschudin T35 base machine with Siemens Sinumerik 840D • Complete SECKLER automation cell (incl. control cabinet) • DITTEL M5000 unbalance measuring device • STREULI MZ 150 coolant filtration system (year 2005) • Existing grinding wheel flanges LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Inspection prior to purchase strongly recommended. All information without guarantee. Auction content is solely the described item. Used machine – sale excludes any warranty. Errors and typographical mistakes excepted.