Other

Moffett M4 25.3 Mitnahmestapler

Condition: used, Year of construction: 2014, operating hours: 3,473 h, fuel type: diesel, MOFFET M4 25.3 PIGGYBACK FORKLIFT - 2.5T - DUPLEX MAST ----VEHICLE HISTORY * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data: Manufacturer: Moffett / Cargotec Ireland Ltd. * Type: M4 25.3 * Year of Manufacture: 04/2014 * Serial Number: N150234 * Operating Hours: approx. 3,473 h * Tare Weight: 2,200 kg * Load Capacity: 2,500 kg * Load Center: 600 mm Drive: Diesel Engine * hydrostatic drive, as far as can be determined on the unit * 3-wheel chassis * off-road design Lifting Mast: Duplex Mast * hydraulic lifting mast * Lifting Height: approx. 4 m * robust mast guidance * fork carriage Fork Equipment: Fork Tines * hydraulic fork carriage * Reach Forks / Telescopic Forks according to documentation * MSE KOOI ReachForks * Type RE * Serial Number 1430060 Hydraulics: hydraulic lifting function * hydraulic mast operation * hydraulic control functions at the driver's seat * additional hydraulic functions on the fork carriage, as far as can be seen in the pictures Chassis: 3-wheel concept * large, lugged tires * tires suitable for off-road use * compact piggyback forklift design * lateral support/wheel arm design Driver's Seat: open cab * driver's seat * seatbelt * steering wheel * control levers for hydraulic functions * instrument/control display * hour meter Lighting: front headlights * rear lights * turn signals / position lights * rotating beacon Safety: driver protection frame * seatbelt * warning lights * acoustic warning device Laedpjzz Ed Iefx Albjh * CE marking * Sound power level 107 dB LWA * Declaration of Conformity available Design / Application: Piggyback Forklift * suitable for truck mounting * compact design * suitable for construction sites and off-road use * laterally transportable / foldable chassis design Tires: lugged industrial tires * off-road profile * varying states of wear visible * tread partially still present Condition: used, overall condition * signs of wear and tear due to age and use * paint damage present * signs of rust / surface corrosion * fork tines with signs of wear Documentation: CE marking * Declaration of Conformity for ReachForks available * nameplate available ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS PLATES AND 15 DAYS AUSTRIA PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS ARE ONLY POSSIBLE VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. (For sales to the EU and third countries will be levied deposit/guarantee of at least € 500.00 / € 1000.00) Subject to changes, errors and prior sale! More vehicles can be found on our Sales are exclusively subject to our terms and conditions - see homepage Important Note - Important Information: Despite careful checking of all details in our offer, it may happen that errors creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore,

Condition: good (used), Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley Lodob Hw Dbjpfx Albjah -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Lower support: 720 mm -Support height: 1400 mm -Weight: 62 kg

Condition: used, Year of construction: 2023, operating hours: 444 h, load capacity: 2,500 kg, fuel type: diesel, gearing type: mechanical, Serviced according to manufacturer’s specifications. ----Moffett piggyback forklift M4 25.3 NX, year of manufacture 07/2023, operating hours 444 h, lifting and load capacity 2,500 kg at LSP 600 mm, all-wheel drive with switchable differential lock, engine: Kubota D1305 18.4 kW/25 hp with emission stage 5, lifting height 3,040 mm, 65 mm side shift per side via lifting mast, fork carriage width 1,300 mm, fork dimensions: FEM 3A 1800x120x50, driver’s seat suspended and foldable. Detailed specifications available upon request! ---- Ljdsz E Tdhopfx Albsah ----For sale to commercial businesses only! No guarantee for the accuracy of the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to provide you with a leasing or financing offer.

Condition: used, Year of construction: 2023, operating hours: 444 h, load capacity: 2,500 kg, fuel type: diesel, gearing type: mechanical, Serviced according to manufacturer’s specifications. ----Moffett piggyback forklift M4 25.3 NX, year of manufacture 07/2023, operating hours 444 h, lifting and load capacity 2,500 kg at LSP 600 mm, all-wheel drive with switchable differential lock, engine: Kubota D1305 18.4 kW/25 hp with emission stage 5, lifting height 3,040 mm, 65 mm side shift per side via lifting mast, fork carriage width 1,300 mm, fork dimensions: FEM 3A 1800x120x50, driver’s seat suspended and foldable. Detailed specifications available upon request! Lodoz Ewqxopfx Albsah ---- ----For sale to commercial businesses only! No guarantee for the accuracy of the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to provide you with a leasing or financing offer.

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Lasdpfon E S T Ujx Alboh Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Year of construction: 1987, condition: excellent (used), Edge bander Lodpjf Upzhjfx Albeah WEINIG UNIVAR 10

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Lasdpfxofx Hyfo Albjh Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0 - 250 - 04 - 0558, Technical data : X working area 2,500 mm Working area Y 800 mm Z working area 40 mm Number of milling spindles 2 Ledorwmwfopfx Albjah Vertical drilling spindles 16 Drilling spindles in X axis 2 Drilling spindles in Y axis 1 Vacuum pump Machine table traverse table Weight approx. 3,500 kg CNC drilling and milling center WEEKE BP 10 , built in 1991. Panel area 5,200 x 1,500 mm. Machining area 2,500 x 800 mm, 16 vertical drilling stations, 1 keyway saw, 2 milling units, support plate handwheel and hydraulic unit. In 2016 he switched to Linux CNC 3D - new computer, new monitor, new software.

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Lasdpfx Ashxvu Eelbeh Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: used, Year of construction: 2011, operating hours: 17,770 h, Equipment: all wheel drive, The Mantsinen 50 RCT is a heavy-duty, crawler-mounted material handler (also known as a grab excavator or 'material handler') manufactured by the Finnish company Mantsinen. Here are the main features: Laodpfxjwz Uh Ej Albsh Technical Data & Applications * Machine type: Crawler material handler, base machine often based on CAT 330/345 platforms, equipped with a grab attachment. * Weight: approx. 52,000 kg. * Horizontal reach: up to 20 m. * Lifting capacity: about 7,500 kg. * Engine: Caterpillar C9 with approx. 195 kW output. * Hydraulic tank: 410 l, additional oil tank 315 l, fuel tank 618 l. * Travel speed: around 3.5 km/h.