Used Gear for sale (7,584)

Condition: excellent (used), functionality: fully functional, Gear shaper Tos OHA50A v, No. 0440253 In very good condition, rated 9/10. Hsdpszxnuwsfx Agtent

Condition: used, Year of construction: 2007, KFA Unit Manufacturer: IMA Year of manufacture: 2007 Technical data For single-sided IMA left-hand machines. 1 motor, 500 W, 400 V, 400 Hz, 18,000 RPM With HSK tool holder Hjdpfx Agsz Ah Rtotsnt Min. workpiece overhang: 30 mm Min. workpiece length: 150 mm Workpiece thickness: 10–60 mm (60–100 mm at V = 20 m/min) Working speed: max. 35 m/min Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: good (used), functionality: fully functional, Tos OFP-32, Serial No. 0427441 Condition: 8/10 Max. module: 7 / 9 Hnodpfezxqdzsx Agtjt Max. diameter: 320 mm Max. length: 200 mm Vertical gear hobbing machine

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Hedozimqrepfx Agtsnt Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: used, functionality: fully functional, table diameter: 430 mm, The price is for both machines – only sold as a set. Make: STAEHELY SH 500 Accessories: change gears, arbors, and one machine with tangential milling head (see photos)!!!!! Table diameter = 430 mm Hodpfxoxfub Do Agtsnt Max. gear diameter = 500 mm Gear width = 240 mm Module = 6

Condition: used, Year of construction: 2008, Maximum workpiece outer diameter 3420 mm workpiece diameter nominal 2400 mm max. module 30 mm control Siemens Sinumerik 840 D Minimal workpiece - internal diameter 630 mm Maximum workpiece outer diameter 3420 mm Maximum workpiece tooth width 600 mm max. rim strength 500 mm Maximum permissible head circle diameter 440 mm Hob/disc cutters – Maximum length 90 mm Milling arbour diameter 80 mm Hnedpfx Agsztz Ruetet milling head -swivable +15/-15 Grad workpiece table outer diameter 1870 mm Workpiece table bore 600 mm Workpiece table – Maximum permissible load 300 kN rapid traverse X-axis 3000 mm/min rapid travel z-axis 4000 mm/min Workpiece table speed 0-6 U/min Tools speed 18-180 U/min weight of the machine ca. 38 t dimensions of the machine ca. 8,41 x 9,05 x 5,19 m total connected load 100 kVA Equipment/accessories: - IFK2 internal milling head - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction - Dry machining only - Technical documentation

Condition: excellent (used), functionality: fully functional, I would be happy to add technical data to the document for you. Gear Hobbing Machine conventional Country of origin: Germany Technical specifications Details max. wheel diameter 600 mm gear width 250 mm max. module 8 total power requirement 2.2 kW machine weight approx. 2000 kg machine dimensions approx. 2500 x 1600 x 1900 mm Hnodpszmqaljfx Agtjt cutter diameter max. 250 - 285 mm clamping table diameter 460 mm table hole 70 mm accessories: various Control unit conventional Additional information Documents I would be happy to add technical data to the document for you. I would be happy to add technical data to the document for you. Gear Hobbing Machine

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Hsdpozr Hd Refx Agtent

Condition: excellent (used), Capacity M16 module Table diameter: 1,200 mm Maximum workpiece diameter: 1,500 mm Milling slide travel: 600 mm Hjdpfxezql Ufe Agtont Table center hole diameter: 250 mm

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hnjdpfxoxdfa Us Agtet Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), functionality: fully functional, Max. wheel diameter: 710 mm Gear width: 335 mm Table size: 630 mm Table bore: 120 mm Max. table load: 700 kg Max. module: 7 Min. module: 1 Hob spindle speed range: 40-315 rpm Feed range: Hodpfx Ajzbt Hrogtont Axial: 0.40 - 5 mm/rev Radial: 0.20 - 2.5 mm/rev Tangential: 0,1-1,25 mm/rev

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. Hnodpfx Agjw Tfb Setet A new control system and drives were installed.

Condition: used, Year of construction: 2006, functionality: unexamined, For sale: lot of 7 industrial electric motors and gear motors. The lot includes: Hnjdpfszfwwbox Agtjt - Siemens electric motors - VEM ATEX explosion-proof motor - Gear motors with industrial gearboxes - Various sizes and power ratings Equipment originates from industrial application and has been professionally removed and stored. Condition: Used industrial surplus. Functionality has not been tested. Sold as shown in photos. Ideal for: - industrial maintenance - spare parts stock - conveyors - mixers - process equipment - machine builders Sale preferably as one complete lot. Location: Dunajská Streda, Slovakia (EU) Worldwide shipping possible.

Condition: used, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), overall weight: 30,000 kg, We offer a wide selection of used geared motors from conveyor systems for sale. Available manufacturers include: SEW NORD Siemens Lenze Demag Technical data: Power: from 0.55 kW to 2.2 kW Hnodpfx Agsy Tg Sajtst Stock: over 1,600 units Total weight: approx. 30 tons Thanks to the large number of units, you are likely to find the right geared motor for your needs. Upon request, we will gladly send you a detailed Excel list with the available models and technical data. Large quantities available immediately Sales preferably as a complete package Price per unit: 100 to 150 € net (depending on the model and condition) If you are interested, we look forward to receiving your inquiry. Please note that unrealistic price offers will not be answered.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Hnodpfxsy Tybne Agtjt Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Hedpfx Agezidz Ietsnt Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Hnsdeyucd Hspfx Agtet Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,263 h, functionality: fully functional, machine/vehicle number: 1704080210, travel distance X-axis: 2,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,200 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 900 mm Spindle speed, max.: 6,000 rpm Spindle mount: SK50 Spindle drive: Geared spindle / ZF gearbox Internal cooling through the spindle available Hedpfx Agezy Ny Dotjnt Table load, max.: 3,000 kg Table size: approx. 2,350 × 850 mm T-slots: 5 × 22 mm Number of tool magazine positions: 40 Tool mount: SK50 Machine weight: approx. 23,000 kg Operating hours: approx. 5,263 h EQUIPMENT 3 tool carts with tools

Condition: used, Year of construction: 2003, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 Control SINUMERIK 840 D number of teeth 5 - 200 Hjdpfx Aox R U E Negtont ratio of transmission 10:1 cutter diameter max. 228 mm x-axis 25 - 350 mm y-axis +/- 175 mm z-axis 125 - 600 mm b-axis -5 / +90 ° total power requirement 75 kW weight of the machine ca. 11,7 t dimensions of the machine ca. 12,5 x 3,0 x 3,0 m Both Spindles retrofitted in 07/2026 Equipped for dry milling Pressure deburrer Deburring device with driven brush Integrated magnetic chip conveyor Promot Cellmaster Cartridge pulse filter system User interface control works with Gleason Summary

Condition: good (used), Year of construction: 1965, max. wheel diameter 900 mm max. module 6,5 stroke up to 150 mm table diameter 900 mm table hole 360 mm weight 3,7 t External: max. diameter 900 mm Max. gear width 150 mm Internal: Hnedpoywnt Tjfx Agtet Max. diameter 630 mm Max. gear width 150 mm Spindle bore table 360 mm Table diameter Ø 900 mm Module 6.5 mm Length 2500 mm Width 2300 mm Height 2600 mm Weight 4100 kg

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. Hedpex Szm Ajfx Agtjnt - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW Hodpfoymf Dajx Agtent turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Hjdeztpixspfx Agtjnt Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Dual pallet changer Spindle cooling Oil cleaner Chip conveyor Cooljet Systems oil cooler Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 min. module 0,1 total power requirement 0,4 kW weight of the machine ca. 120 kg Hnjdpfxow N S D Ss Agtst dimensions of the machine ca. 0,6x0,6x0,75 m

Condition: good (used), Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane Hodpez Anwtofx Agtsnt -Manufacturer: DEMAG, geared motor type 13/6 PF 8/2 -Power: 0.07/0.27 kW -Speed: 680/2900 rpm -Wave: see photos -Protection rating: IP54 -Dimensions: 270/210/H235 mm -Weight: 12.7 kg