Used Gear Tools for sale (42,159)

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 54 rpm -Power: 0.25 kW -Design: B5 angle -Shaft diameter: 25 mm -Protection class: IP 44 -Outer flange: Ø 160 mm Fpedpfx Acjc R R Ayjwsf -Recess: Ø 110 mm -Number: 1x motor available -Price: per piece -Dimensions: 390/200/H200 mm -Weight: 21 kg/piece

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 50 rpm Fjdpfjc U Tz Aex Acwepf -Power: 0.25 kW -Design: B5 -Shaft diameter: 28 mm -Protection class: IP 54 -Outer flange: Ø 160 mm -Recess: Ø 110 mm -Price: per piece -Quantity: 2 available -Dimensions: 405/160/H215 mm -Weight: 14.2 kg

Condition: good (used), geared motor, electric motor -Speed: 44 rpm -Power output: approx. 0.25 kW -Design: B5 angle Fpjdpfx Aoc Uz H Iecwjf -Shaft diameter: Ø 25 mm -Outer flange diameter: Ø 140 mm -Recess: Ø 95 mm -Protection rating: -Number: 1x motor available -Price: per piece -Dimensions: 390/200/H170 mm -Weight: 14.5 kg

Condition: good (used), Tool sharpening machine with wet grinding. Fjdpfx Ajich Elocwopf

Condition: excellent (used), Heavy Linck reduction gear for sash drive up to 160 KW Shaft diameter 110 mm. Triple bearing. 1 pulley 1250 x 315. 1 pulley 630 x 315 mm. Fpodpfxsfn Rigj Acwjf Other transmissions also available.

Condition: used, Acer ‘E’ Mill Turret Milling Machine (Ex College) 2 Axis Newhall Spindle Taper R8 Spindle speeds to 60 – 4200rpm Table Size 50 x 10” Table Fpsdpfx Aceyzfn Aewsf Power Feed Longitudinal 415V Electrics Coolant For sale with Jet Machinery Ltd Jet Machinery Stock No: #79134 Machine Serial Number: 506016 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), 16 tool holders of this size. €50 each Sale only within EU member states! No private sale. Any warranty rights are excluded. Fedpfxjyzd H Rj Acwopf We do not accept any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and equipment, nor for compliance with any safety or environmental protection requirements mentioned in accident prevention regulations.

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Fpsdpfx Acoyzdyqjwof Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Fjdsyzdxaepfx Acwopf

Condition: used, Approx. 80 tool holders of this size. Fpjdpfx Aoyzdn Uscwjf €30 each Sale only within EU member states! No private sale Any warranty rights are excluded. We do not assume any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with any safety and environmental protection requirements specified in accident prevention regulations.

Condition: excellent (used), functionality: fully functional, Approx. 60 tool holders of this size. Fpodsyguzuepfx Acwef Sale only within EU member states! No private sale. Any warranty is excluded. We do not assume any liability for the accuracy of the technical data and year of construction, the completeness of accessories and tooling, or for compliance with all safety and environmental requirements as specified in the accident prevention regulations.

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 648 mm, turning length: 1,300 mm, turning diameter: 1,016 mm, spindle bore: 102 mm, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, spindle motor power: 30 W, rotational speed (max.): 2,400 rpm, Equipment: rotational speed infinitely variable, Centre distance: 1.300 mm Swing over bed: Ø 1.016 mm Swing over cross-slide: Ø 648 mm Spindle speed: 2,400 rpm Bar capacity: ø102 mm Turret: 10 stations live tooling Control: Haas CNC control C-axis: 0–360° X-axis travel: 432 mm Z-axis travel: 1,118 mm Supplied with: Live tools Chip Conveyor Hydraulic chuck Toolpresetter Machine user manuals Country of origin: United States Fpodpfoyut Dwex Acwsf Motor power: 30 kW Machine (L×W×H): 380 × 233 × 220 cm Machine weight: 11.500 kg

Condition: used, #200103 Trumpf EVO22W10 (without identification groove) 86.00° R1.00 / H=100.00 / 500 kN/m Fjdpfx Aoyx Hxwocwspf Segment lengths: 2x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 2x 50 mm 7x 100 mm 2x 200 mm 2x 300 mm 7x 500 mm ----- #200104 Trumpf EVO22W10 (identification groove at the bottom) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 40 mm 2x 45 mm 2x 50 mm 2x 200 mm 1x 300 mm 3x 500 mm ----- #200105 Trumpf EVO22W10 (identification groove in the center) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 3x 25 mm 2x 30 mm 2x 35 mm 2x 40 mm 2x 45 mm 1x 50 mm 4x 100 mm 2x 200 mm 2x 300 mm 8x 500 mm ----- #200107 Trumpf EVO26W24 86.00° R2.50 / H=100.00 / 700 kN/m Segment lengths: 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm ----- #200108 Trumpf / Schmid EVO24W16 86.00° R1.60 / H=100.00 / 700 kN/m Segment lengths: 1x 25 mm 1x 30 mm 1x 40 mm 2x 45 mm 2x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 5x 500 mm ----- #200109 Trumpf EVO20W6 86.00° R0.60 / H=100.00 / 400 kN/m Segment lengths: 3x 100 mm 2x 200 mm (1x damaged) 6x 500 mm ----- #200110 Trumpf EVO22/S-W10 86.00° R1.00 / H=100.00 / 380 kN/m Segment lengths: 1x 40 mm 2x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Fedpfxjx Emd Ts Acwepf Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Fpsdpfex Emfkex Acwef Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Fjdpjx Hgmwofx Acwopf Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, stroke 12 mm -Punch dimensions: 1x Ø7 mm / 1x radius 13 mm, see photos with dimensions Fpedpfx Ajyx A Unjcwsf -Dimensions: 535/350/H267 mm -Weight: 142 kg

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 min. module: 0,5 total power requirement: 48 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed Fpedpfewdyx Usx Acwef *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück Fjdpfxjxz Avbj Acwepf *

Condition: used, Year of construction: 1997, Technical details: Fpedpjxz Aw Esfx Acwef max. wheel diameter: 300 mm gear width: 110 mm max. module: 6 weight of the machine ca.: 10,5 t *

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) Fsdpfx Asyxy S Rocwspf - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: used, Year of construction: 1991, max. wheel diameter --- mm gear width --- mm Fpodpjya Eqasfx Acwsf max. module --- min. module --- Control --- total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: used, DECKEL S11 universal tool & cutter grinder under power in our warehouse Fpsdjphvlaspfx Acwof Mimu machine-tools (Italy)

Condition: like new (used), All parts are for sale, complet. Fpedpfx Acohi Tvbjwef

Condition: good (used), MAchine come with toolholders. Fpsdpevk Ng Asfx Acwsf