Used Gear Skiving for sale (11,738)

Year of construction: 2007, condition: used, max. wheel diameter 400 mm gear width - mm Dujdogr Harspfx Afnel max. module - workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Condition: used, Year of construction: 2003, grinding wheel diameter: 400 mm, helix angle: 45 °, wheel diameter: 1,500 mm, Used Höfler Rapid 1500, built in 2003 Mahr measuring system Interlit oil preparation system Location: Australia Duedjv U D Tfspfx Afnol

Condition: good (used), SEW-EURODRIVE geared motor Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Dedpfx Afotku Egonsul Shipping with forwarding agent.

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 32.5 rpm -Power: 0.75kW -Angle Dsdpfx Afjciq D Hsnoul -Type: B5 -Diameter shaft: Ø 35 mm -Brake: 24V -Protection class: IP 65 -Number: 1x geared motors available -Price per piece -Dimensions: 560/300/H240 mm -Weight: 42kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, workpiece weight (max.): 100 kg, gear diameter: 300 mm, controller model: Optronic CNC D140, center height: 250 mm, table length: 2,300 mm, TECHNICAL DETAILS Centre height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm Gear diameter: 300 mm Module range: 0.5 mm - 8 mm Helix angle: 35° Maximum workpiece weight: 100 kg MACHINE DETAILS Control type: Optronic CNC D140 Dimensions & Weight Dodpfx Aox Hzrzsfnoul Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Number of transport packages: 5

Condition: ready for operation (used), Year of construction: 1986, operating hours: 1,200 h, functionality: fully functional, wheel width: 250 mm, helix angle: 45 °, type of input current: AC, travel distance Y-axis: 250 mm, feed rate X-axis: 12 m/min, stroke length: 400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 2,600 rpm, grinding wheel speed: 2,100 rpm, grinding spindle motor power: 1,500 W, gear diameter: 250 mm, overall weight: 3,730 kg, rotary table diameter: 200 mm, stroke adjustment: 400 mm, tool length: 280 mm, wheel diameter: 250 mm, distance table center to spindle nose: 607 mm, Equipment: sliding door, Grinding Machine STANKO 3A662 The STANKO 3A662 is a semi-automatic tool grinding machine designed for precision sharpening of worm milling cutters and gear cutting tools. Manufactured in the former USSR, this machine is known for its robust mechanical design, reliability, and long service life in industrial environments. Dsdpfxox Nprbe Afnsul The machine is capable of sharpening cutters with a maximum diameter of up to 200 mm and a maximum cutter length of approximately 280 mm. Grinding is performed using abrasive or diamond grinding wheels with diameters from 200 to 250 mm, allowing flexibility for different sharpening operations. The grinding slide provides a maximum stroke of 400 mm, with adjustable feed speeds depending on the spiral pitch of the cutter. The grinding head can be swiveled up to ±45°, enabling the sharpening of cutters with different helix angles. The grinding spindle operates at discrete speeds of 1500, 1900, 2100, and 2600 rpm and is powered by a 1.5 kW motor. The machine operates on three-phase AC power (220/380 V, 50 Hz). With an overall machine weight of approximately 2600 kg (up to 3730 kg including accessories), the rigid cast-iron construction ensures excellent stability and vibration damping during operation. Key Features -Semi-automatic grinder for worm milling cutters -Maximum cutter diameter: 200 mm -Grinding wheel diameter: 200–250 mm -Adjustable grinding slide stroke up to 400 mm -Swivel grinding head up to ±45° -Multiple spindle speeds: 1500 / 1900 / 2100 / 2600 rpm -Supports abrasive and diamond grinding wheels -Heavy-duty industrial construction Typical Applications -Sharpening of worm milling cutters -Maintenance and reconditioning of gear cutting tools -Tool rooms and gear manufacturing plants

Condition: used, module Diameter mm boring diameter mm Duedpfxjd Il Iqo Afnol Drawer cabinet with 52 Rack Milling Cutter Mod. 0.7-10 single and multi-barreled 124 hobs Mod.0.3-2.5 40 worm wheel cutter Mod. 0.3-2.5

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Duedpfx Asx Hnz Nefnjl Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: like new (used), We offer a comprehensive spare parts package for the machine types Doppstadt DW 3060 and Doppstadt AK 430/435/560. These are new and as-new parts! Please request our list! Dujdpfxjqx Ur Dj Afnel Do you have a problem with your bevel helical or planetary gearbox? We offer qualified repair service, spare parts, and new gearboxes! We will accept your defective gearbox as part exchange after inspection! Please send us your enquiry!

Condition: good (used), Gearbox, spur gear, angle gear, reduction gear -Translation: 1:1.5 -Drive shaft: Ø 30 mm Duodpfx Afob A H I Tenel -Dimensions: 400/340/H280 mm -Weight: 32 kg

Condition: used, Year of construction: 1994, max. wheel diameter 1.800 mm gear width 000 mm control Sinumerik 840 C profile depth 80 mm grinding wheel diameter 400 mm grinding wheel width 80 diameter of spindle pin 140 mm length of spindle pin 45 mm radial slide travel 1.000 mm tangential adjustment 300 mm axial slide travel 1.000 mm table diameter 1.200 mm table hole 300 mm feed speeds X: 3.000 mm/min feed speeds Y : 5.000 mm/min Dujdpfjv Santox Afnel feed speeds Z: 6.000 mm/min total power requirement 80 kW weight of the machine ca. 15 t dimensions of the machine ca. 7,7 x 6,9 x 3,9 m electrics - voltage/frequency 400 / 50 V/Hz centering device

Condition: used, Year of construction: 2006, max. wheel diameter 2 - 45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 weight of the machine ca. 2,2 t control Fanuc 18i-MB max. workpiece length 250 mm weight of the machine ca. 2200 kg Milling cycles: - straight, helical, crowned gearing - radial, radial-axial, climb and conventional milling, roughing, finishing - worm wheels, straight-toothed bevel wheels, face gearing (option: only in partial process) Technical Details: - maximum workpiece length 250 mm - maximum toothing length 150 mm - maximum module in steel 1 mm (gear hobbing) - maximum module in steel 1.5 mm (worm milling) - maximum module in steel 0.5 mm (bevel gear hobbing) - milling cutter diameter 16-32 mm (gear hobbing) - milling cutter diameter 40-63 mm (worm milling) - maximum setting angle of milling head ±45 deg. (Rolling) - maximum setting angle of milling head ±30 deg. (worm milling) - Shift travel 34 mm (CNC axis) - Collet / retraction mandrel W20 - maximum speed of the workpiece spindle 770 rpm. - milling spindle drive 0.55 kW - Maximum speed of the milling spindle 8000 rpm. CNC axis drives: -X-axis = plunge travel 80 mm -Z-axis = longitudinal feed travel 190 mm -C-axis = workpiece axis 360 deg. -Rapid traverse X/Z 6 m/min. -Hydraulic unit 0.37 kW -Dimensions 2100 x 1440 x 1700 (LxWxH) Options: Djdpfx Aevq Sfzsfnjul -CNC shift axis 34 mm -Adjustment angle with CNC axis -Deburring device Accessories: - spiral conveyor

Condition: excellent (used), Gear motor, electric motor Djdpfx Afeb A Hiceneul -Condition: unused -Speed: 90 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 25 kg

Condition: used, Year of construction: 1983, max. wheel diameter 1800 mm gear width 000 mm Dodpfx Afev Saw Iensul max. module 18 axial slide travel 1000 mm distance - table - arm of counterstay 1800 / 1467 mm milling spindle - taper SK 55 diameter of hob 300 mm width of hob 375 mm axis distance between spindles 100 - 1060 mm milling slide swivelling 240 Grad table diameter 1200 mm table hole 300 mm taper MK 6 min. number of teeth 9 turning speed - milling spindle 20 - 150 U/min feeds axial 1 - 1000 mm/min radial feed 1 - 300 mm/min tangential feed 1 - 225 mm/min electrics - voltage/frequency 380 / 50 V/Hz control Sinumerik 3 M total power requirement 69 kW weight of the machine ca. 26,5 t dimensions of the machine ca. 8,0 x 4,0 x 5,6 m Suitable for straight and helical gears, cylindrical gears and worm gears. profile milling attachment turning speed programme electronic handwheel

Condition: used, Year of construction: 2003, max. wheel diameter 600 mm gear width 92 mm max. module 8 mm max. ram stroke 100 mm table diameter 400 mm Dodpfx Afevzhflsnjul workpiece dia. 600 mm Shockable standard module max. 8 mm angle adjustable from - to -0,5 / +0,5 Grad stroke range 80 - 1200 Hübe/min feed radial axis machine column 1 - 3750 mm/min Accessories: - Various stop blade holders - Various clamping devices

Condition: good (used), Year of construction: 1995, Gearbox, spur gear, angle gearbox -Drive shaft: Ø 20 mm -Hollow shaft: Ø 19 mm Dsdpfx Aeb A N Iujfnjul -Dimensions: 220/200/H200 mm -Number: 9x gearboxes available Price: per piece -Weight: 7 kg -Translation: 1:9.92

Condition: good (used), Year of construction: 2004, Gearbox, spur gear -Drive shaft: Ø 25 mm hollow shaft -Hollow shaft: Ø 24 mm Dedjb A Iq Iepfx Afnjul -Dimensions: 220/190/H185 mm -Weight: 14 kg -Translation: 1:20

Condition: good (used), Gearbox, spur gear Dedpjb A H Rpjfx Afnjul -Drive shaft: Ø 25 mm splined shaft -Dimensions: 220/190/H185 mm -Weight: 10 kg

Condition: good (used), Gearbox, spur gear -Translation: 1:2,9 -Drive shaft: Ø 19 mm Djdpfxjb A Ny Ds Afnsul -Drive shaft: Ø 19 mm hollow shaft -Dimensions: 260/240/H180 mm -Weight: 12 kg

Condition: good (used), Year of construction: 1984, Gearbox, spur gear, angle gear, reduction gear -Drive shaft: Ø 20 mm Dsdsb A Nqbepfx Afnjul -Dimensions: 200/180/H200 mm -Weight: 11 kg -Translation: 1:13,8

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor Dedpfxowkr Afs Afnjul -Manufacturer: KEB, spur gear motor type G 1.2 C DK 63 G 4 /TS140 -Speed: 36 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 345/125/H185 mm -Weight: 12.3 kg

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor -Type: SK 62-180 L/4 i 11.59 -Speed: 127 rpm -Engine: Nord Type SK 180 L / 4 -Power: 22.0 kW / 1450 rpm -Protection class: IP55 Dsdpfxet Ddd Ss Afneul -Shaft: Ø 65 x 130 mm -Dimensions: 1030/430/H425 mm -Weight: 243 kg

Condition: good (used), gear motor, electric motor -Speed: 750 rpm -Power: 0.8 kW -Design: B3 -Shaft diameter: Ø 25 mm -external fan -Protection class: IP 44 Duodpfob A R Nnjx Afnel -Weight: 26 kg -Overall dimensions: 650 x 230 x H190 mm

Condition: good (used), Gear pump, cold resin pump, pump for viscous substances, metering pump for foundry technology Dujdpfx Afofcvf Tjnol -Drive: 1.1 kW -Speed: adjustable -Dimensions: 750/250/H550 mm -Weight: 70 kg

Condition: good (used), Gear motor, electric motor, electric gear motor Dujdpfx Aockbhbjfnol -Speed: 21.5 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 65 -Number: 1x engine available -Dimensions: 680/270/H250mm -Weight: 55kg