Used Gear Planer for sale (13,269)

Condition: used, Year of construction: 2018, functionality: fully functional, planing height: 230 mm, planing width: 320 mm, FEM9-32XC / RHINO 800XL Feeler-series 9 FEELER series A. Capacity: (1) Working width: 18–320 mm (2) Working thickness: 6–160/230 mm (3) Minimum working length: 240 mm (4) Feed speed: 7–36 m/min B. Motor: (1) 1st bottom horizontal spindle: 10/20 HP with outboard bearing (2) 2nd right vertical spindle: 10/15 HP with outboard bearing (3) 3rd left vertical spindle: 10/20 HP with outboard bearing (4) 4th top horizontal spindle: 10/20 HP with outboard bearing (5) 5th bottom horizontal spindle: 10/20 HP with outboard bearing (6) 6th right vertical spindle: 10/15 HP with outboard bearing (7) 7th left vertical horizontal spindle: 10/15 HP with outboard bearing (8) 8th top horizontal spindle: 10/20 HP with outboard bearing (9) 9th bottom horizontal spindle: 10/20 HP with outboard bearing (10) Feed drive: 15 HP (Inverter) (11) Elevation: 2 HP C. Spindles: (1) Spindle diameter: 50 mm for 1st, 2nd, 3rd, 4th, and 9th spindles; 40 mm for 5th, 6th, 7th, and 8th spindles (2) Spindle cutting speed: 6200 rpm (3) Adjustment range, vertical spindle: 80 mm (4) Adjustment range, horizontal spindle: 35 mm D. Cutting circles: (1) 1st bottom horizontal spindle: 100–180 mm (2) Right vertical spindle: 110–250 mm (3) Left vertical spindle: 110–250 mm (4) 1st top horizontal spindle: 110–250 mm (5) 2nd bottom horizontal spindle: 110–250 mm (6) Right vertical spindle: 110–250 mm (7) Left vertical spindle: 110–250 mm (8) Top horizontal spindle: 110–250 mm (9) Bottom horizontal spindle: 110–250 mm E. Miscellaneous: (1) Dust extraction port diameter: 160 mm (2) Infeed table: 2–2.5 m (3) Feed roller diameter: 140 mm (4) Includes 50 mm cutterhead F. Standard Equipment: (1) Digital feed speed display: DPRLF-40K (2) Automatic table lubrication system (3) Centralized point-to-point lubrication (4) Pneumatic chip breakers on top spindles (5) Pneumatic fence on left spindles (6) CE marking (7) Motor: IE3 (8) Sequence: Bottom, Right, Left, Top, Bottom, Right, Left, Top, Bottom Fodpoxrla Rjfx Afnjpb Options: • OP014-15 Variable Feed Speed Controller, 15 HP inverter • OP001 Pneumatic control for 1st and 2nd elevation infeed roller • OP041 Outboard bearing for 2nd, 3rd, 6th, and 7th spindles • OP017 Digital position controller for 3rd, 4th, 7th, and 8th spindles • OP042C Enhanced sound enclosure • OP023AE3-15 Feed motor, 15 HP (E3) • OP023BE3-10-15 Motor for 10/15 HP spindle (Y/A, E3) • OP008-5 Extension table, 2.5 m with stand and fence • OP023BE3-10-20 Motor for 10/20 HP spindle (YiA, E3) • OP002 Three-mode feed roller pneumatic elevation • OP010-230 Extra working height 230 mm for 2nd, 3rd, 6th, and 7th spindles • OP008A Air cushion table, 320–400 mm This translation uses precise, industry-standard terminology suitable for specialized machinery listings.

Condition: used, Year of construction: 1990, functionality: fully functional, planing width: 520 mm, total height: 1,200 mm, total width: 1,400 mm, overall weight: 600 kg, table length: 3,000 mm, Equipment: motor brake, SCM F 520 heavy-duty jointer planer Planing width: 520 mm Table length: 3,000 mm Hydraulic height adjustment of the infeed table via foot pedal 4-knife Tersa cutterhead Adjustable straight and concave jointing 4 kW Electric motor brake Machine is fully FUNCTIONAL and in GOOD CONDITION The machine can be inspected and tested at any time at the location in Chemnitz. Fsdpfjxz Tplsx Afnspb

Condition: used, Year of construction: 2001, with air cushion table, chamfering unit Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 pcs 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Motor power: 11.0 kW Fpjdpfx Aexr A Npofnjb 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Shared motor with right spindle With ATS/M system (automatic positioning control) 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW With ATS/M system (automatic positioning control) 5th spindle: top, beveling unit 6th spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW Motor brakes: mechanical Electric hood locking: Yes Height adjustment of top spindle: electric, with feed Feed brake system: Yes Feed speed stepless up to: 3 - 26 m/min Feed roller pressure: pneumatic Feed drive power: 4.0 kW Feed drive: Cardan shaft Lubricating pump: automatic Max. cutting depth (joining): 10 mm Jointing cutter on planer: Yes Powered rollers in table: 1 pc Control type: PLC (programmable logic controller) Spindle position indicator: digital display Infeed rollers before planer: Yes Air cushion table: double track Central lubrication point: Yes Description: Joiner table with jointing fence 1.0 m, pneumatic pressure Infeed roller before planer Powered rollers in table Total connected load: 52 kW Location: Nattheim

Condition: new, Year of construction: 2010, Make Voith Model: RWW11 E5 Windrive planetary gear Year of manufacturing: 2010, Unused Dimensions LxWxH (mm) 2400 x 1450 x 1700 Fpodpetub Dzefx Afneb Weight (kg) ca 6900 Total quantity in stock 3 Country of origin Germany Comments Unused mindmill planetary gear, 3400 Kw power supply needed, n1: 476 rpm / n2: 1500 rpm

Condition: excellent (used), Four side planer scm compact xl - planing width 23cm - planing height 13cm -electric lifting of the upper head and feed rollers - all spindles adjustable vertically and horizontally - bottom 4kW, right and left from one motor 7.5kw kW, upper 5.5kw universal 5.5kw Fedpfx Afelat Hdjnjpb Machine in very good condition

Condition: ready for operation (used), functionality: fully functional, A used gear hobbing machine with a maximum workpiece diameter of 1250mm and maximum machinable module of 16. Cutter speed: 250 rpm, max. machinable module: 16/DP1.5, max. workpiece diameter: 1250mm, table diameter: 1100mm, index wheel diameter: 987mm, workpiece bore: 250mm, workpiece insertion depth: 525mm, min. cutter adjustment above table: 390mm, hob carriage travel: 1000mm, rapid traverse: 800mm/min, max. table load: 8000kg, weight: approx. 21000kg. Fpedpfxox Rylbe Afnjb

Condition: used, Year of construction: 2010, Technical details: x-travel: 6500/13500 mm y-travel: 4000 mm z-travel: 1500 mm w-axis: 2250 mm table surface area: 5500/12500 x 3000 mm max. workpiece weight: 50.000/75.000 kg ram head dimension: 520 x 625 mm milling spindle motor: 67,4 ( s1/100% ) kW max. torque on the spindle: 2900 Nm tool taper: DIN 69893 HSK-A 100 milling head speed: 1 - 1000 / 5 - 5000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 29,5 x 9,5 x 8,2 m with CNC SIEMENS 840 D autom. tool magazine for 212 tool stations autom. milling head magazine for 6 milling heads 1 milling head -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2 milling head -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3 milling head -angular head extended- 40kW, 4000 rpm, 1800 Nm, HSK-A 100 4 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 Fpodjway I Uepfx Afnjb 5 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6 milling head -universal Index head - 40 kW, 4000 rpm, 2100 Nm, C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 coolant attachment, chip conveyor *

Condition: good (used), Year of construction: 1987, operating hours: 2,685 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, total length: 5,235 mm, total height: 3,045 mm, total width: 3,990 mm, spindle speed (max.): 640 rpm, spindle speed (min.): 55 rpm, overall weight: 11,000 kg, Equipment: documentation/manual, Gear cutting machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which was completely overhauled just a few years ago. Investments made: - Overhaul including milling head (2021) approx. €70,000 Fedpow Dcx Rofx Afnopb - All hydraulic hoses renewed (2021) approx. €3,500 - New oil mist separator (2021) approx. €5,000 Numerous tools and clamping devices available, see pictures and attachment.

Condition: used, Year of construction: 1984, machine/vehicle number: 241-502, Four-side planer for sale Fpsdpfx Aox Aryxjfnsb

Condition: excellent (used), Year of construction: 2009, max. wheel diameter 315 mm gear width 280 mm max. module 8 min. module 1 Control Siemens 840 D distance cutter centre - clamping area 20 - 245 mm distance spindle /table 190 - 470 mm diameter of hob 160 mm tangential adjustment 110 mm ical angle 45 ° min. number of teeth 4 / 8 cutter length max. 200 mm table surface area 295 mm milling spindle speeds (infinitely variable) 50 - 400 U/min total power requirement 58 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,1 x 3,5 x 2,6 m The machine was completely overhauled by SerWeMa in 2009 Fpodpfxjx N Ndkj Afnjb equipped with a Siemens Sinumerik 840D control. Possible uses: Straight and helical gears, crowned or tapered spur gears, Worm wheels for single or multi-start worms, Worms, sprockets, ratchet wheels, splines

Year of construction: 2026, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Fsdpoc Uydaofx Afnspb Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Fjdew Tfb Sopfx Afnspb Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg Fsdswc A Shspfx Afnopb ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: used, Year of construction: 1996, functionality: fully functional, working width: 180 mm, planing height: 120 mm, planing width: 180 mm, We are offering this used Weinig Quattromat 18 four-sided planer, year of manufacture 1996, ready for immediate operation. Fedpfxex Rvr Do Afnopb If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Costa Planing Machine High-Performance Profiling Planer – Processing Centre with 10 spindles, used exclusively for processing spruce wood. Technical Features: - Working width up to 300 mm - Multi-stroke spindle system for flexible profiling and dimensional processing - Feed rate: 140 m/min to 200 m/min - NC control for precise, repeatable set-up and processing operations - All spindles equipped with support bearings (hydraulic clamping) for smooth operation, dimensional accuracy, and surface quality - Planing table in perfect condition, showing no signs of wear or damage - Precision work in terms of dimension and angle across the entire working width - The machine is in technically flawless condition and operates precisely and reliably. Spindle Configuration: - Horizontal spindle - Lifting spindle right, vertical - Lifting spindle left, vertical - Lifting spindle horizontal - Lifting spindle right, vertical - Lifting spindle left, vertical - Spindle top, horizontal - Spindle bottom, horizontal - Spindle bottom, horizontal - Levelling spindle bottom, horizontal This spindle arrangement enables complete machining of workpieces in a single pass with high dimensional accuracy and excellent surface quality. Fedpfx Aox N D Rrefnspb

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens Fpodex N Nddspfx Afnsb max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° Fsdpfx Afsu Dbuconopb maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Fpodewrh H Nopfx Afneb Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: excellent (used), max. wheel diameter 600 mm gear width 250 mm max. module 10 min. module 1 Fpsdpfx Afjx N Nc Toneb weight of the machine ca. 0,9 t dimensions of the machine ca. 1,8 x 1,4 x 1,4 m

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 40-200 mm total power requirement: 31,3 kW weight of the machine ca.: 4 t Fsdexc E Icspfx Afnspb dimensions of the machine ca.: 1,8 x 2,2 x 1,8 m

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Fodpfoxc E H Sox Afnjpb Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: used, Year of construction: 2001, Technical details: Fpodpjwh Dlmsfx Afnjb max. wheel diameter: 280 mm max. module: 5 min. module: 1 min. number of teeth: 7 toolpiece turning speed range: 4.000...10.000 U/min tool length: 210 mm CBN *

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm Fsdpfx Aoizlh Hefnepb z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine *

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 min. module: 0,5 Fpedpfewdyx Uox Afnsb total power requirement: 48 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed *

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 Fsdpfxox Iumno Afnjpb min. module: 0,5 total power requirement: 45 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation *