Used Gate for sale (583)

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Dedjn Nv H Sjpfx Aiijkw Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Condition: new, Year of construction: 2026, Technical data Control system: Multi-axis real-time interpolator, with active trajectory forecasting, LAN communication, EtherCat, 2ms sampling time, optional RTCP tool end tracking, correction map. Working area: X 600 x 900 mm Y 3000 x 12000 mm Gate clearance and Z axis range: 100-1000 mm Drive system: Omron servo drives with EtherCat protocol, X, Y helical slats hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 Linear bearing: Trapezoidal rails, Bosch Rexroth 25 Speed: Up to 120 m / min Acceleration: Up to 1G Program resolution: up to 0.0001mm Positioning accuracy: 0.01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 2 kW to 36 kW powered by an inverter Tool taper: ISO30 lub HSK63 ER32 Maximum speed of the electro-spindle: 24,000 rpm (option 6,000, 40,000, 50,000) Construction: Steel welded, ribbed, stress relieved, precision machined Dedpfxjn Hq Hus Aiijkw Equipment options positioning and correction of the material by means of a camera, laser, measuring probe linear, revolver tool magazine cooling the tool with mist, chilled air 3D laser or touch scanner positioning databases additional angular / rotary axes drilling units, angular active oscillating knife, roller knife, drag knife, creaser, marker pen pneumatic clamping clamps chip extraction installation integration with an industrial robot Table type: T-slot: aluminum profiles, solid aluminum, solid steel; vacuum; hybrid, pneumatic clamping clamps

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. Dksdpfx Ajin Etzjiijw AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: new, Year of construction: 2026, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. Djdpfx Aijin Eztoiskw AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: Djdoin Uilopfx Aiiekw - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Year of construction: 2022, condition: new, New Spare parts Rösler Roesler Turbine H42 Blade H42 99501010 G 300033085 Blade H32 99501035 300033354 Blade H 28 99501015 300129471 Impeller 99505016 300129472 Control Gate 99505017 300129473 Rösler Strahlanlage NEW Spare parts for all Hurricane H42 H32 H28 Wurfschaufel H42 Impeller H42 / H32 H28 Verteiler H42 H32 H28 Dkodpfxjctgubj Aiiew We can offert for spare Parts for Rösler, Shot Blasting Machines! Spare parts for Rösler Turbine H28 H32 H42

Year of construction: 2022, condition: new, New Spare parts Rösler Roesler Turbine H42 Blade H42 99501010 G 300033085 Blade H32 99501035 300033354 Blade H 28 99501015 300129471 Dkjdsctguispfx Aiiew Impeller 99505016 300129472 Control Gate 99505017 300129473 Rösler Strahlanlage NEW Spare parts for all Hurricane H42 H32 H28 Wurfschaufel H42 Impeller H42 / H32 H28 Verteiler H42 H32 H28 We can offert for spare Parts for Rösler, Shot Blasting Machines! Spareparts for Rösler Turbine H42 H32 H28

Condition: used, machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm table-size:450x450 mm Bruderer Double Roll Precision Feed:BBV 190/85 links stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm inlet width:120 mm feed length:15-80 mm dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW Dedjcxxrdjpfx Aiiskw weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve -Type: MOF H-3-1/4 -PN: 1.5-8 bar Price: per piece -Quantity: 2 available Djdpfx Aiob A It Toiekw -Weight: 0.3 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Type: JMVH-5-1/4-B -Solenoid valve -PN: 2-10 bar Dsdpjb A H Ewofx Aiiekw -Price: per piece -Quantity: 2 available -Weight: 0.7 kg

Condition: good (used), Solenoid valves for block mounting, disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve -Type: Thread mount: M18x1.5 mm Dksdpob A H Hnofx Aiisw -Number: 80 valves available -Price: per piece -Weight: 1.5 kg/piece

Condition: good (used), rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg Dkjdpfx Aiscnkwasiow

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Magnetic valve -Series: W402 -Weight: 0.9 kg Dkedpfx Aieb A S Hpoisw

Condition: used, Gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve - Manufacturer: Valpres -Type: 72000007 -Size: DN32 PN40 -Price: per piece Djdpfsfylcaox Aiijkw -Number: 3 piece -Dimensions: 155/250/50 mm -Weight: 4.3 kg/piece

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, laser type: fiber laser, Model 2022 for Industry 4.0! Laser marking machine for: = ᐳ Mark = ᐳ tempering of metals = ᐳ labeling of many materials = ᐳ deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (var.pulse width on request) Simple operation and handling! Iayabahok Our Exclusive XL laser marking system is characterized by: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect starting engravings) • "New Generation ECO" scanner unit • 19 "PC control, no external card! • very large viewing window with certified laser safety glass • Scan area approx. 150 x 150 mm • electrical height adjustment • Full housing with 4 roles • Mark "weightless" lift gate for safe. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from an Excel file • Laser parameter finder per matrix over 2 parameters • TCP IP connectivity for external components • Industry 4.0 can be processed at any time using the TCP / IP protocol. • Inputs and outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis machining • Performance increase of up to 50% through 64bit • Improved stability through integrated control card • Optional up to 4 axis controls (integrated) • Optional DEEP engraving with Z axis • More powerful algorithms for fast hatching. • Completely redesigned galvo generation • 2-fold laser pointer for checking the focus position. • LED lighting of the marking area • Connection possibility for external suction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating instructions and operating software in German • protective housing acc. Laser class 1 • incl. 4 hours of training in our training center (max. 2 people) Do you need individuality? With pleasure. Choose Dkedpfx Aod S I Smsiijw from our numerous accessories: = ᐳ Camera systems for object detection = ᐳ Fiber laser source in almost all variations = ᐳ motorized and automatic height adjustment = ᐳ Scanlab equipment = ᐳ Automation for assembly = ᐳ conveyor belts for inlet and outlet = ᐳ 3D marking and GRAVIER function. = ᐳ automatic focus adjustment = ᐳ turntable = ᐳ motorized sledge = ᐳ Interlock system for labeling WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts Our engraving lasers of course allow individual wishes in terms of design and size! = ᐳ Made in Schweinfurt! Images can contain options! Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, laser marking system, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, laser marking system, marking laser, marking laser, marking laser, marking laser

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment. Dkodpfx Ajziciwjiisw

Condition: used, Year of construction: 2020, _____KTS 30 Special / Crane-Manure Tank Saddle Trailer, 3-axle, 30 cbm tank capacity - V2A stainless steel tank, DIN 1.4301, manufactured in-house - Nova-Gray powder-coated frame - Tank diameter 2200 mm - Manhole at the rear - 3 baffle plates specially welded - Rinsing system for stirring the contents - 2 x hose storage, aluminum - Tire size 385/65 R 22.5 - 3 axles, SAF with air suspension - ABS - EBS - Disc brakes with special off-road protection - Wabco braking system with spring brake accumulator and parking brake - 1st axle as a lift axle with starting aid - 2nd axle rigid - 3rd axle trailing steering axle with automatic locking from 30 km/h and when reversing - Automatic filling shut-off via float and indicator at the front - Free filling and venting - 6 x polyethylene fenders - 2 x LED work lights at the rear - Aluminum support legs - Underrun protection with truck tail lights - 1 x lockable storage box on the left, water tank with soap dispenser for hand washing on the right - Document holder - Ge-Ka couplings for filling at the suction arm - Compressed air discharge at the suction arm for suction hose - TÜV inspection - Surcharge for tank with 31.7 cbm - KTS surcharge for 31.7 cbm tank instead of 30.0 cbm (longer chassis required) - All KTSPROFI package, KTS 30 light - Simplest operation by pressing a button - Fully automatic interlocking of the tank ventilation valves - No possibility of incorrect operation - With overpressure and underpressure valves - Ventilation valve and suction valve as pneumatic flat gate valves - Main control panel at the rear left in a stainless steel housing with laser-engraved control panel - Additional control panel at the front left, level indicator at the rear with cover - Automatic pump shut-off when full - Pump Vogelsang 6 cbm KTS 30 - Vogelsang rotary lobe pump VX 186-260, 6,000 liters / min. - Injection system and interchangeable housings - Docking funnel at the top, 8 inches with knife gate valve (KTS) - with pneumatic actuation (flat gate valve) for all vehicles - Pump mounting parts in stainless steel 1.4301 - instead of galvanized version - Flat gate valve under the tank, KTS 30 - Flat gate valve under the tank for discharging with KTS 30 (MANDATORY !! for KTS docking funnel at the bottom and if there is the possibility of transferring liquid) - Overflow tank, KTS - made of stainless steel with swivel flap and drain valve - Additional LED headlight at the front (2 pieces) - 2 LED spotlights at the front, mounted under the hose trays on the right and left - Transfer crane 6" KTS short - Transfer crane in 6" up/down, right/left, approx. 6 m long. Only for emptying! - Slide dome cover 600 KTS 30 - Slide dome cover 600 pneumatic for KTS 30 - Storage location: BNP PARIBAS LEASE GR Dksdozpgriopfx Aiijw

Condition: used, maximum load weight: 1,830 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2024, next inspection (TÜV): 01/2028, loading space length: 5,060 mm, loading space width: 1,953 mm, loading space height: 2,011 mm, total length: 6,950 mm, total width: 2,520 mm, total height: 2,570 mm, Equipment: ABS, * Rear loading ramp * Ventilation flaps * 1 partition gate * 1 side door ----* Tire size: 225/70R15C * Technically permissible total weight: 3500 kg * Unladen weight: 1670 kg * Overall length: 6950 mm Djdezrrlmepfx Aiijkw * Next inspection date: / ----Vehicle number: 12364----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, technical inspection/main inspection, complete export handling, arranging financing, applying for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: new, functionality: fully functional, empty load weight: 1,600 kg, Year of construction: 2026, For sale: JKW-16 tracked mini excavator with an 18.4 kW diesel engine. The machine's operating weight is 1600 kg, and the maximum digging depth is 1800 mm. The excavator features a 360° rotation, a cabin, and work lights. A significant advantage of this machine is its extendable tracks, which allow the excavator to be narrowed for passage through tight spaces, gates, or openings, and then widened to increase the track gauge and provide more stable operation during digging. Dkedpfx Ajzudq Hoiiew This excavator is ideal for construction, earthmoving, gardening work, and digging trenches for installations, cables, and pipes. Technical specifications: * Model: JKW-16 * Engine: Diesel * Power: 18.4 kW * Operating weight: 1600 kg * Digging depth: 1800 mm * Dimensions: 2270 × 1100 × 2270 mm * Bucket capacity: 0.04 m³ * Tracks: rubber, extendable * Rotation: 360° 🎁 FREE INCLUDED: * Narrow bucket – ideal for digging trenches for installations, cables, and pipes, * Wide ditching bucket, * Standard bucket installed on the excavator.

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. Dkedeuwlzyspfx Aiiow The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

Condition: new, Year of construction: 2026, CORMAK FAN4000 Material Handling Fan – High-Performance Industrial Dust and Chip Extraction The CORMAK FAN4000 is a professional material handling fan designed for industrial dust extraction systems used to transport wood chips, sawdust, and dry particulate waste. Equipped with a high-performance centrifugal impeller and a powerful 4.0 kW motor, the unit delivers an impressive 6,500 m³/h airflow, making it an ideal solution for large woodworking shops and manufacturing facilities. Designed for continuous operation, the FAN4000 efficiently serves multiple woodworking machines generating dry waste. Main advantages of the machine Airflow capacity of 6,500 m³/h – efficiently removes dust, chips, and sawdust from multiple workstations. 4.0 kW / 400 V industrial motor – designed for continuous operation in industrial environments. Motor speed of 2,850 rpm – ensures reliable performance even under heavy workloads. Large Ø250 mm inlet and outlet connections – enable easy integration into industrial ducting and extraction systems. Compact dimensions (670 × 600 × 600 mm) – simplify installation in confined technical areas. Heavy-duty steel housing – resistant to vibration, mechanical damage, and corrosion. Construction and technology The FAN4000 has been engineered for demanding industrial environments. At its core is a centrifugal impeller dynamically balanced and mounted directly on the motor shaft. This direct-drive design minimizes power losses while eliminating the need for belts or additional transmission components. The powder-coated steel housing protects internal components against dust, moisture, and chemical exposure. High-quality bearings ensure long service life, smooth operation, and reduced noise levels. Precision and operating efficiency Thanks to its high airflow capacity, the FAN4000 efficiently transports large volumes of dry waste in real time. By maintaining constant negative pressure throughout the extraction system, it helps prevent clogging of filters, ductwork, and machinery. This contributes to stable production processes while protecting machine components from excessive wear. The FAN4000 is ideally suited as a central extraction fan for integrated dust collection and material handling systems. Applications The FAN4000 industrial extraction fan is suitable for: industrial woodworking facilities, furniture, window, and door manufacturing, workshops processing solid wood, MDF, and HDF, CNC machining centers and automated woodworking machines, conveying wood chips and sawdust to cyclones, silos, or collection containers. Standard equipment 4.0 kW three-phase motor (400 V) Direct-drive centrifugal impeller Powder-coated steel housing Ø250 mm inlet connection Ø250 mm outlet connection Optional equipment Flexible Ø250 mm suction and discharge hoses Connection reducers and machine adapters Dksdpjvuqyrefx Aiijw Cyclone separators and final-stage filters Blast gates, elbows, and duct tees Automatic machine start control systems Technical specifications Parameter Value Maximum airflow 6,500 m³/h Inlet diameter 250 mm Outlet diameter 250 mm Motor speed 2,850 rpm Dimensions (L × W × H) 670 × 600 × 600 mm Motor power / Voltage 4.0 kW / 400 V Weight 53 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm Dkjdpfxoyu Uris Aiijw - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: like new (used), The system is a complete surf finisher system including suction station + undersize screening station + complete water treatment + water tank from Rösler. If required, including robot + handling portal. The components are transferred by robot to a portal with holders and immersed in the rotating surf container. The deburring performance is 20 seconds. Immersion time corresponds to about the same performance as 10-15 minutes. in a conventional vibratory finishing machine. Rotating work tank RMSF 4/800 1 piece round plastic container Dkodpfx Ajyngitoiijw - Working tank diameter: 850 mm Working tank depth: 500 mm 1 pc. quick coupling for easy changing of the working container 1 pc. drive motor, power 7.5 kW 1 pc. dosing device D1-K/320 SF (circulating water) on stand 1 pc. stand for enemas in the working container 1 piece flow monitoring (by means of flow monitor) Undersize screening: 1 pc. Grinding wheel return system 1 piece underframe as a stable welded construction 1 pc. balancer for weight compensation (sanding pad + hose + nozzle) including mounting frame - Suspension for hose on the base 1 pc. vacuum generator for generating a negative pressure - Connection of the line system to the transfer device of the vibratory finishing system - Suction hose with nozzle, length approx. 5 m 1 piece collection container 500 liters as a cyclone separator - for receiving the process media that are sucked out of the working container, - for delivering the process media to the screening machine - incl. automatically operated gate valve and hose for returning the process media to the screening machine 1 pc. spray nozzles for rinsing out the collection container 1 pc. 2-hand control for flap 1 pc. dosing device DZ1-K Rösler screening machine R 12/6 SM-E - for undersize screening - Total length: 1,400 mm - Overall width: 1,160 mm - Screen area: 1,200 x 600 mm - Delivery height: 1,065 mm - Step in the separation zone: 1 x 40 mm - Drive power of vibration motors 2 x 0.525 kW - Vibration motors arranged laterally - Engine speed: 1500 rpm - Operating voltage: 400 V, 50 Hz, 3 Ph N/PE Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge consisting of: Centrifuge Z 1000 * Aluminum alloy centrifuge rotor * Speed: 2,050 rpm * Reduced stripping speed via frequency converter * automatically retractable paring knife * Amount of sludge per peeling cycle: up to 25 kg * automatic residual water drainage * Long bearing service life due to special bearings that can be relubricated * electronic vibration monitoring * automatic rotor flushing Accesories 1 piece mud truck RSKM 30 1 pc. Combined waste water and circulation tank 700/700 liters 1 pc. flocculant dosing pump DP2 1 pc. Automatic post-dosing DZ-4/320 2 suction lances (vacancy monitoring) 1 pc. sound insulation package approx. 80 dB(A) 1 piece cooling unit RK 3 1 piece titration measuring kit for manual compound measurement

Condition: used, mileage: 890,646 km, power: 279 kW (379.33 HP), first registration: 04/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 39 m³, loading space length: 7,020 mm, loading space width: 2,460 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, tail-lift, * On-board computer with multi-function steering wheel * Parrot hands-free car kit * Air conditioning ----* Sun visor * Auxiliary headlights * Air horns ----* Hill start assist * Tire pressure monitoring system * Differential lock, rear axle * Leaf/air suspension * Trailer coupling with DouMatic * NATO charging connector ----Menke, 1st floor, livestock body* hydraulic unit * Hydraulic loading ramp * Storage boxes * 1 intermediate gate, hydraulically adjustable * 7.02 x 2.46 x 2.30 = 17.27 m² ----* Tire size, front axle: 275/70R22.5 * Tire size, rear axle: 315/60R22.5 * Fuel tank: 490 liters * AdBlue tank: 80 liters * Technical total weight: 20500 kg * Unladen weight: 10675 kg * Permissible trailer load: 17286 kg * Overall length: 9600 mm Dksdpfx Aieym Iy Deijw * Wheelbase: 5500 mm ----Vehicle number/Vehicle: 11799----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport----YOUR VTS TEAM

Condition: used, mileage: 400,000 km, fuel type: diesel, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, crane, trailer coupling, MAN TGS 26.480, year 2017, 400,000 km, Euro 6 emission standard, wheelbase 3900 mm, third steerable and liftable axle, towable. BONFIGLIOLI 20000 XL crane with 4 telescopic extensions + 4 telescopic jib extensions, SCANRECO radio control, three-way tipping body, 5.30 meters x 2.55 meters, 60 cm high side boards with rear drop gate. New bodywork. Industry 4.0 options available. Djdpfey U I Dyjx Aiijkw