Used Garbage Press for sale (12,322)

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Gkodpfx Akjy Dfcljyec Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press Gsdez Rk Nyopfx Akyskc This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Single-action eccentric press Gkedpfx Aksz Rk Tloysc Pressing force: 40 t Stroke: 180 mm Ram stroke: 0 - 76 mm Ram stroke rate: 145 /min Distance table/ram, max. stroke at top, adjustment at top: 350 mm Table area: 600 x 360 mm Through-hole in table: 110 mm Table height above floor: 800 mm Ram area: 270 x 175 mm Ram adjustment: 65 mm Drive power: 2.2 kW Weight: 1.75 t Complete documentation

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Gedpfx Ajz Nhp Ijkyjkc

Condition: good (used), Year of construction: 1987, pressing force: 1,250 t, throat depth: 770 mm, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: Gkodpfxoz Rn His Akyjc - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP18 GEN2 system is built around the second-generation RP18 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP18 GEN2 press, max. 18.5 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP18 GEN2 with automatic central lubrication Gkedpfoz Rwimjx Akyjc • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 18.5 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: like new (used), functionality: fully functional, pressing force: 250 t, total height: 4,800 mm, overall weight: 14,000 kg, Intemach TURI 250-H 250-ton hydraulic press. Own weight is 14 tons, height is 4.8 meters. Table size: 1400 x 900 mm Main engine: 37 kW Auxiliary cylinder: 80 x 50 mm diameter Master cylinder: 340 mm diameter Ram stroke: 600 mm Gkjdsz Rprtspfx Akyec Working speed: 2 – 20 mm/sec

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Godetwliwepfx Akyjkc Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Gkjdjz Rl Nhopfx Akyjc Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: excellent (used), Year of construction: 2019, pressure 13 t box opening 890 x 600 mm box depth 400 mm total power requirement 2,2 kW weight of the machine ca. 0,765 t dimensions of the machine ca. TBH 1,4 x 1,3 x 2,15 m for cans, PET, and cardboard MACFAB (distributed by BEMA Verpackungsabfall GmbH). Gkedpfjz Rqp Hsx Akyjc • Pressing force: 130 kN (13 tonnes) • Motor power: 2.2 kW • Voltage: 230 V / 50 Hz (1-phase, AC) • Machine dimensions: H: 2,133 mm | W: 1,040 mm | D: 1,328 mm • Loading opening: H: 890 mm | W: 600 mm | D: 400 mm • Bale dimensions: approx. 650 mm (H) x 400 mm (D) • Typical bale weights: • Cardboard: 40 – 60 kg (depending on material) • Aluminum cans: up to 25 kg (approx. 1,500 cans) • PET bottles: up to 32 kg (approx. 1,000 bottles) • Special feature: Cross-strapping ensures stable bale shapes for cans and plastics. Fast cycle time of 24 seconds. Low operating noise level of 72 dB.

Condition: used, Year of construction: 1969, Used Machine Year of manufacture: 1969 Features and technical specifications: - Pressing area: 255 x 135 cm - Pressing force: 100 metric tons - Number of press cylinders: 4 - Cylinder diameter: 100 mm - Opening width: 400 mm - Press plates: gold-anodized ELKOM plates Gkjdpfx Akoz Np Thsyoc - Heating: electric - Heating capacity: 18 kW - Maximum temperature: approx. 120 °C - Weight: approx. 4,500 kg - Safety pull cord will be retrofitted

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm hole in the table 150 mm Gsdpoz N Hu Nofx Akyekc table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Condition: good (used), Year of construction: 2000, functionality: unexamined, Equipment: documentation/manual, Eccentric press VSS, type LE 400 C, complete with LASA strip feed system. Press LE 400 C Table size 1250 x 895 mm Ram size 950 x 560 mm Weight 21,000 kg Nominal capacity 400 t (metric tons) Stroke rate 40/min Stroke length 450 mm Dimensions 1550 x 2900 x 3610 mm Unwinding reel – up to 4000 kg Gjdpfxjz Rk She Akyekc - Coil outer diameter – 1600 mm - Coil inner diameter – 450/550 mm - Strip width – 450 mm - Revolutions – max. up to 25/min LASA 400 strip straightening machine - Adjustable height - Speed – up to 70 m/min - Complete documentation - More information and detailed images available upon request - The straightening machine with unwinding reel can also be sold separately. Press – after inspection - Stroke adjustment and clutch-brake

Condition: used, Year of construction: 2019, total length: 3,750 mm, total width: 1,900 mm, total height: 2,900 mm, Colour: Cream Weight: 12.620 kg Price: On request Machine-errors. Can't refer axes. To be repaired. - Details: - └ Description: Machine errors. Cannot reference axes. Needs repair. - Year: 2019 - CE marking present: Yes - Serial number: 73431915241 Gkjdpfx Aozzb I Aekysc - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 22.0 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Max. stroke [mm]: 265 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard, Angle measuring system - Transport dimensions: 3750mm x 1900mm x 2900mm (l x w x h) - Transport weight [kg]: 12620kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server EX-P6 Gkedpezap Sbsfx Akyjc Includes paper decks A-CF03 + A-CF04 Includes stacker Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 14,303,610 pages Colour: Approx. 14,006,634 pages Black: Approx. 296,976 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 125 t, stroke length: 180 mm, throat depth: 300 mm, clearance between the columns: 2,600 mm, total length: 3,200 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 7,400 kg, Press brake, bending length 3100 mm, capacity 125 to, control DELEM 58, gap between column 26000 mm, stroke 180 mm, throat gap 300 mm, motor 11 KW, back gauge, dimension 3200x1700x2250 mm, weigth ca. 7400 kgs, 2 frontarms, foot pedal, serveral tools Godpfxsz Rqlnj Akyskc

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 524 497, Heidelberg SORM 1 Color Sheet-Fed Offset Press Year 1988 - Serial-No. 524 497 Size max. 520 x 740mm Gkjdsz N Admopfx Akyjc Impressions 102.984.943 Available Immediately

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250011, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Gkodpfoz Rvy Dex Akyec Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: used, Orwak 3410 Swedish Industrial Vertical Paper Baler / Waste Baling Press (Pressing force 24t, 4 kW), Used Equipment Technical Data: Manufacturer: Orwak AB (Made in Sweden) Type: 3410 (Product No.: 4903410-00) Serial No.: 82268 Net Weight: 1350 kg Overall Dimensions (W × D × H): 1600 × 1100 × 3050 mm Bale Dimensions (W × D × H): 1200 × 800 × 900 mm Bale weight: up to 400 kg (Pressing force 24t, 4 kW) Electrical Data: Power Supply: 3 × 400 V / 50 Hz (3-phase) Motor Power: 4.0 kW Rated Current: 9.8 A Equipment and Features: Convenient, wide top loading opening for fast material loading Integrated strapping band holders for quick and easy bale tying Gsdjz Rn Awjpfx Akyokc Quiet, enclosed hydraulic operation with high compaction force Door mechanism with safety interlock Durable Swedish technology designed for exceptionally low maintenance costs

Condition: like new (used), Year of construction: 2020, Like-new press brake from Ermak / Ermaksan Gkodezunlhepfx Akyoc Type: Power-Bend Pro 3100 135 Capacity: 3100 x 135 tons Delem DA56s CNC control Y1, Y2, and X axes CNC controlled Akas Fiessler laser safety system Amada/Euro clamping system Manual crowning Includes a set of tooling

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 560 t, stroke length: 500 mm, operating speed: 10 mm/s, reverse speed: 30 mm/s, table width: 1,400 mm, clearance between the columns: 1,260 mm, total length: 2,010 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 4,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this very good Boschert Quick-Bend 56 CNC press brake, manufactured in 2018. Manufacturer: Boschert Gkodpjy Nbw Aefx Akysc Model: Quick-Bend 56 CNC Year of manufacture: 2018 Condition: very good Category ID: 1466 Type ID: 1717 Machine type: press brake If you have any further questions or need more information, please send us a message or give us a call.

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Capacity 2050 x 50 tons Delem control system Gedpjz N Exgjfx Akyekc Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: excellent (used), Year of construction: 2023, power: 11 kW (14.96 HP), pressing force: 220 t, stroke length: 3,100 mm, throat depth: 650 mm, total length: 4,500 mm, total width: 2,200 mm, total height: 3,100 mm, overall weight: 16,200 kg, Press brake DURMA - AD-SERVO 30220 MACH-ID 9836 Make: DURMA Type: AD-SERVO 30220 Control: Delem DA69-T YOP: 2023 New 2023 very little working hours ! Hydraulic top and lower clamping CNC Crowning DAM Laser Measuring and Angle correction system Delem DA69-T 3D graphical controller Component Backagauge with R and Z Axis   Under power ! New EUR 120.000 Max. bending length: 3050mm Gksdpfx Aoz Nwztjkyec Distance between column: 3100mm Max. pressing force: 220T Adjustment X-Axis back gauge:650mm Number of controlled axis: 4 Power: 11kW Length: 4500mm Width: 2200mm Height: 3100mm Weight: 16200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Godpfxozwppyo Akyskc Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without die holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600

Condition: good (used), Parker 82C 061 hose crimping machine for hoses from 1/4" to 1 1/4" (depending on the crimping dies) with 5 sets of crimping dies (colors see images). Included is an Enerpac PUJ1200E hydraulic power unit, as well as a TONE SM 210-SL hose cutter, manufactured in 03/2016. The table is also included. The equipment has been checked for proper functioning and has undergone electrical inspections, which were carried out by an electrical company. Gkedpoz N Slmjfx Akyec