Used Martin T 70 for sale (83)

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW Cjdpfx Acjhfufgo Nspu -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Year of construction: 1981, Used, good condition Make: Martin Cpsdpewkvw Tsfx Ac Neu Type: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length: approx. 2700 mm Pivoting up to 45° Parallelogram guard Tabletop extension Hydraulic height adjustment Hydraulic pivot adjustment Miter stop Extraction connection: D 120/80 mm Space required: approx. 2800 mm x 3400 mm x 1200 mm Weight: approx. 1000 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: excellent (used), Year of construction: 2000, Saw blade tilting up to 45.5 degrees Cutting height 145 mm max. saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/ 4000/ 5500 rpm Motor power 5.5 kW Suction DM - DM 120 mm max. cutting length 3300 mm Cpodpsmmb Acjfx Ac Nju Dimensions L x W x H = 3300 x 3800 x 1400 mm Weight approx. 1365 kg Generally: parallel fence width adjustment with hand-wheel on the front of the machine Digital display for cutting width Saw blade height and tilting adjustment via foot pedal Scoring unit adjustable by electric motor Length stop on the cross table with digital display retractable parallel stop CE incl. manual incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, cutting length (max.): 3,000 mm, cutting width (max.): 1,250 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, table length: 3,000 mm, total length: 3,200 mm, total width: 2,000 mm, total height: 1,800 mm, main saw diameter: 400 mm, overall weight: 1,200 kg, slide length: 3,000 mm, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, power: 5.5 kW (7.48 HP), space requirement length: 3,200 mm, space requirement width: 2,000 mm, space requirement height: 1,800 mm, sliding table length: 3,000 mm, Equipment: scorer, No. 04518 Sliding table saw Martin T 60 CLASSIC Used, only 130 operating hours Motor power main saw 5.5 kW Sliding table 3000 mm long Saw blade size 250 - 400 mm diameter Cutting height maximum 130 mm Saw blade tilt motorized 0° - 46° Saw blade change with quick clamping system SprintLock Speeds 4000 / 4800 / 6000 rpm Speeds are determined by the position of the V-belt 2-axis scoring unit pneumatically controlled (Please note: On the video the scorer is not connected to compressed air, therefore you cannot see any height adjustment, but the function is given) Cutting width approx. 1250 mm Control PowerPC Operation via touchscreen Control for cutting height, cutting angle, scoring unit Digital display for cutting height, cutting angle, cutting width Suction connection 120 mm diameter at the bottom, 80 mm diameter at the top of the protective hood Cross table 1300 x 650 mm LW Edging ruler with 2 stops, extendable up to 3200 mm, swivels according to scale Protective hood arm can be swiveled away Complete technical documentation available Including various equipment and tools Transport dimensions approx. 3200 x 2000 x 1800 mm LWH Weight approx. 1200 kg Cjdpfxeygav Rj Ac Nspu To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: Csdpfxoxdlx Rs Ac Nspu - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1983, Used machine Cpedpfx Acoyb T T Es Nju M.Nr. V130296 Year of manufacture: 1983 Motor data: 380 V - 50 Hz - 13 A Rigid 30 mm spindle Height adjustment via handwheel Forward/reverse operation Extraction ports: 1 x 140 mm - 1 x 100 mm Max. cutter: 250 mm diameter - Max. slotting tool: 400 mm diameter Speed: 3000/4500/6000/9000 rpm Table length: 1200 mm Table dimensions: 900 mm x 280 mm Weight approx.: 950 kg Haffner 3-roller feed Top milling fence with fine adjustment External dimensions W/D/H approx.: 1250/1200/1400 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1986, Serial number V 147506 Length of planer table: 1,600 mm Cpjdpfx Asyfn E Rjc Nju Planing width: 500 mm Angle fence: 1,100 x 170 mm Dimensions (L x W x H): approx. 3,000 x 1,200 x 1,100 mm Weight: approx. 800 kg

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg Cpodpfx Ajwnbfkoc Neu

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 Codpfx Ajt U Rn Sjc Njpu planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data Cpodjpgkmwjpfx Ac Nou table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg Codpfx Acepq If De Nspu - immediately available -

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position Codpfx Ajw D T Dkjc Njpu T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Csdpfer Hr D Nex Ac Nspu Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: V178451, planing width: 500 mm, total length: 2,900 mm, total height: 1,200 mm, total width: 1,000 mm, overall weight: 1,000 kg, table length: 2,900 mm, chip removal for surfacing (max.): 8 mm, working width: 500 mm, jointer table length: 1,640 mm, input voltage: 380 V, power: 5.5 kW (7.48 HP), space requirement width: 1,000 mm, space requirement length: 2,900 mm, space requirement height: 1,200 mm, height adjustment type: hydraulic, Equipment: motor brake, We are offering this used Otto Martin T 53 jointer planer, year of manufacture 1990. MARTIN Jointer Planer T53 Description: Cpedpfx Acsx R Ttfe Nsu For sale is a MARTIN T53 jointer planer. The machine is no longer needed and is therefore being sold. Technical Data: • Planing width: 50 cm • Infeed table: 164 cm • Outfeed table: 120 cm • Max. cutting depth: 8 mm • Operating voltage: 380V • Motor: 5.5 kW • Cutter block for strip knives • Automatic motor brake • Slotted, low-noise table lips • Hydraulic table adjustment • Concave and pointed joint adjustment • Digital display for cutting depth, LED (non-functional) • Digital display for concave/pointed joint, LED (non-functional) • Aigner tilting fence 45°, with extendable rail • Space requirement (LxWxH): approx. 2900 x 1000 x 1200 mm • Weight: 1000 kg • Year of manufacture: 1990 Condition: The machine is fully operational and ready for use. Note: The LED displays are unfortunately non-functional. All other features work perfectly. Inspection & Collection: Viewing by appointment is possible. Collection on site. An invoice with VAT will be issued. If you have any questions or require further information, feel free to send us a message or call us.

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and technical data: - Condition: well-maintained - Raise/lower and tilt 0-45° with hydraulic foot pedal - With fine and quick stroke function, fully maintenance-free - With digital display on the circular saw fence for cutting width - With fixed angle adjustment on the length stop for 75/67.5/60/45 degrees - Cutting height: 145 mm - Cutting width: 1050 mm - Cutting length: 3300 mm - Speeds: 2800-4000-5500 rpm - Motor: 5.5 kW - With scoring unit Availability: short-term Codpfx Asx Enq Iec Njpu Location: Röllbach

Condition: used, total length: 2,700 mm, total width: 2,220 mm, total height: 1,500 mm, Weight: 900 kg Cedpfxjwnh S Dj Ac Nepu - Documentation available: No - CE certificate present: No - Serial number: V024400 - Main motor power [kW]: 5.5 - Roller table length [mm]: 2500 - Table width [mm]: 1940 - Max. saw blade diameter [mm]: 350 - Dust extraction nozzle diameter [mm]: 140 - Options: Scoring unit - Schuinstelbare zaagaggregaat: - └ Max. adjustable [°]: 45 - Transport dimensions: 2700mm x 2220mm x 1500mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1978, spindle tilting: yes 0 - 45° height adjustment: manual tilting adjustment: manual fence adjustment: manual Cedpfxouzkxfe Ac Njpu read out height : - read out tilting: Scala read out fence: Scala sawblade diameter: 30 mm speeds: 3000, 4500, 6000, 9000 motor power: 5 kW motor brake: yes, feed brake suction connection: 2 x 100mm machine length: 1200mm machine depth: 1400mm weight: 800kg

Condition: good (used), Year of construction: 2000, Sizing saw with scoring unit 3 m sliding carriage Csdotw Hd Aopfx Ac Nepu Digital displays Width adjustment is no longer motorized Height adjustment converted to foot hydraulics Clamping beam not included in the price

Condition: reconditioned (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 116680, Connected load 380V 11A planing width 630 mm planing height 250 mm feed rate 8-20 m/min Cpsdpfx Acsh U A Evo Nju suction socket 160 mm weight approx. 870 kg rubberized infeed and outfeed roller two-knife shaft with strip planing knives Central lubrication Planing height via handwheel adjustment Star-delta switch

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Cpedpsvwfiajfx Ac Nju

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, total width: 1,200 mm, total height: 1,200 mm, total length: 1,200 mm, planing width: 630 mm, overall weight: 1,100 kg, working width: 630 mm, number of planer blades: 2, 2-knife shaft with wedge strips Rubber infeed and outfeed roller Segmented pressure bar Cpodpfxewcn Syj Ac Nou Electric height adjustment with digital display 4 feed speeds 6-9-12-18 m/min Extraction nozzle Ø 160 mm

Year of construction: 2005, condition: ready for operation (used), Equipment: T 7300/2, T 7301 (precision adjustment for parallel stop), T 7302, T 7309/2, T 7330 (fixed scale), T 7337 (analog cross stop with seamless alignment), saw blade diameter: 250-500mm, speed: 2800/4000/5500/min, max. cutting height: 80mm, cutting width: 850mm, saw blade swivel range: 0-46°, sliding table length: 3000mm, connected load: 4kW, weight: 1.65t. An on-site inspection is possible. Csdpfjw S Txvjx Ac Nopu

Condition: like new (used), Year of construction: 2004, Four-side planer Martin T 90 Fully refurbished machine Year: 2004 Specifications: Working width: 260 x 160mm Spindle speeds: 6000 RPM Tersa cutterblock spindle 56 Amps 6 Bar Cjdpfx Aox Tgu Ijc Nepu

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Cpodpjtxirfefx Ac Neu

Condition: used, Martin T 75 Prex Panel Saw Cjdeyg Eybjpfx Ac Nspu German quality product Heavy-duty precision panel saw – double-sided tilt Axis positioning control with 10.4” touchscreen Motor: 11 kW Infinitely variable speed control: 2,000 – 6,000 rpm Fully automatic 3-axis scoring unit, electronic Maximum cutting height: 204 mm, saw blade diameter: 250 – 550 mm Saw blade tiltable from -46° to +46° Height and tilt adjustment via control system Parallelogram cross table, for double-sided tilting up to 46°, LCD displays, 0.01° fine adjustment for cutting angle Angle cutting system RadioCompens Rip fence table length: 3,300 mm Cutting width with parallel fence: 1,250 mm Electronic motorized width adjustment via axis positioning control Width fence pneumatically lowerable Swiveling control panel above table Continuous longitudinal fence, digital, with 2 stop flaps Foldable front table CE-compliant model First delivered in 2020 Machine AS NEW – SHOP-TESTED from lease return Available ex-stock Lieboch