Used Gang Drill for sale (5,280)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Dodpfx Aswh Rp Eolbjcl Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: excellent (used), Year of construction: 1976, TOYOSK 0-R fixed spindle pitch high speed 12-spindle fine thread drilling machine Year of manufacture: 1976 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Dedewifguspfx Albecl Spindle diameter: 8mm Table feed: 65mm Table surface: 200x260mm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanical, small holes / threads. Power: 0.75kW Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: excellent (used), Heidenhain TNC 124 control system X/Y/Z travel 450/260/120 mm W travel 450 mm Clamping area (L x W) 770 x 320 mm Dsdjwk Edpepfx Albscl Permissible table load 100 kg Distance table to spindle nose (min. – max.) 0 – 110 – 560 mm Feed rate X/Y 1 – 2000 mm/min Tool quick-change system SF 32 Speed range continuously variable 100 – 9200 rpm Drive power 5 kW Space requirement (W x D x H) 1500 x 1480 x 2330 mm

Condition: good (used), Year of construction: 1988, machine/vehicle number: 1669-110-1406, Offer 25094 Technical specifications: Djdpfx Aowdvwtelbocl - Drilling capacity in steel ST 60: 50 mm - Drilling capacity in steel ST 60: 60 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 225 mm - Drill spindle speed continuously adjustable from 35 – 950 rpm - Right-hand and left-hand rotation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat 360 mm - Max. distance between drill spindle and table/base plate 740/1220 mm - Table with 2 T-slots 700 x 590 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space required approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - With: - Emergency stop button - Lighting - Coolant system

Condition: used, functionality: unexamined, Ferwood Code: AGG0212 - Manufacturer Code: 1061206 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service—please contact us. Dcedoyrpl Eepfx Albsl 6KG - 36X26X21

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MZS21X1 Multi-Spindle Boring Machine – Professional Precision for Furniture Manufacturing The CORMAK MZS21X1 multi-spindle boring machine is a professional solution for woodworking shops and furniture manufacturers that demand maximum precision, productivity, and reliability in high-volume drilling operations. Designed for accurate drilling in solid wood, MDF, plywood, and other wood-based materials, the machine provides complete process control and exceptional repeatability when producing holes for furniture fittings and joinery. Main advantages of the machine Pneumatic drilling head with 0°–90° tilt adjustment – features intermediate locking positions and a 45° reference point for quick setup. 21 working spindles – allow multiple holes to be drilled simultaneously, making the machine ideal for cabinet and furniture production. Mechanical digital position indicator – enables precise drilling height adjustment. Dodpfx Alevuf Rlsbjcl 1.5 kW motor – delivers stable power and high operating efficiency. Pneumatic workpiece clamping system – ensures secure material positioning and consistent drilling accuracy. Automatic return of the drilling head – the unit automatically retracts after reaching the preset drilling depth. Adjustable feed speed – allows drilling parameters to be optimized for different materials. Support rollers and aluminum fence – extendable for workpieces up to 3 m in length. Quiet and efficient operation – achieved through precision-engineered components and a rigid machine design. Construction and technology The CORMAK MZS21X1 is built on a rigid steel frame that minimizes vibration and ensures outstanding drilling accuracy. The drilling head can be quickly adjusted to the required angle, while tool changes are simple and efficient. All spindle drive components are robustly mounted to ensure long service life, even under intensive industrial use. The pneumatic system is compatible with standard workshop air supplies operating at 6–8 bar. Precision and work efficiency The machine enables accurate drilling for dowels, hinges, and other furniture fittings in a single operation. With 21 spindles and adjustable drilling position and angle, operators gain exceptional flexibility for complex production tasks. The mechanical position indicator and digital adjustment display allow fast machine setup and significantly reduce changeover times between production batches, improving overall manufacturing efficiency. Applications The CORMAK MZS21X1 multi-spindle boring machine is suitable for: furniture manufacturing plants, woodworking workshops, interior fitting and cabinet production, manufacturers of wooden components, small and medium-sized production facilities requiring fast and repeatable drilling operations. Standard equipment 21-spindle drilling head Pneumatic workpiece clamps Aluminum fence with support rollers Digital height indicator Foot pedal control Complete set of drill holders and tool mounts Optional equipment Dust extraction systems Technical specifications Parameter Value Number of spindles 21 Spindle spacing 32 mm Maximum drill bit diameter 10 mm Maximum drilling depth 60 mm Maximum drilling diameter 35 mm Power supply 400 V Maximum working area 3000 × 2500 mm Spindle speed 2,840 rpm Required air pressure 0.6–0.8 MPa Motor power 1.5 kW Dimensions (without table extensions) 1400 × 1300 × 1400 mm Weight 350 kg

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Dcjdpfx Aew E H E Rolbel Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles Dcodpfjyhqa Ajx Albsl F) Brush-cleaning machine "WANDRES"

Condition: new, Year of construction: 2026, Drill Vice 125mm IW125 is a precise and robust vice for both drilling and milling operations, designed for stable clamping of components in demanding machining processes. The cast steel body guarantees excellent rigidity, while the wide jaws and large opening allow flexible operation with components of various sizes. The grooved base with four elongated mounting slots enables quick installation and reliable positioning on the machine table. Main advantages of the IW125 drill vice Wide 125mm jaws for stable clamping of larger workpieces. Maximum opening 125mm – suitable for a wide range of components. Cast steel body ensuring high resistance to bending, vibration and dynamic loads. Precise jaw guidance minimising the risk of displacement during machining. Grooved base with four elongated mounting slots for quick and repeatable installation on machine tables. Wear resistance even under intensive industrial use. Construction and manufacturing technology The IW125 drill vice is made of high-quality cast steel, characterised by excellent mechanical strength and resistance to deformation under load. The body design ensures optimal rigidity during drilling and light milling operations. The jaws are guided along ground surfaces, maintaining parallelism and repeatable clamping. The durable lead screw ensures smooth clamping action, minimising axial play and allowing precise adjustment of the clamping force. Precision and performance The precision of manufacture directly translates into machining stability. The rigid construction reduces vibration, improving surface quality, dimensional accuracy and tool life. With a large jaw opening and parallel guidance, the IW125 vice enables fast setup, reducing the need for additional clamps. This results in higher productivity and consistent machining results. Applications The IW series drill vices are designed for professional workshop use. The IW125 model is ideal for: metalworking and mechanical workshops, toolrooms and prototype departments, Dedpfx Asycqd Djlbjcl small-batch and series production operations, drilling, tapping, counterboring and light milling operations. This versatile vice for drills and milling machines is designed for users seeking long-lasting precision and reliability. Standard equipment Cast steel vice body Hardened jaws Lead screw with handle Grooved base with four elongated mounting slots Technical data — Drill Vice 125mm IW125 Jaw width 125mm Jaw height 24mm Maximum opening 125mm Mounting hole spacing 155mm Mounting hole width 13mm Body material cast steel Base grooved, 4 elongated mounting slots

Condition: new, Year of construction: 2026, The CORMAK ZX 7055 VARIO DRO milling and drilling machine is a high-performance universal machine designed for drilling, milling, and tapping operations in steel and cast iron. Its robust cast-iron construction, continuously variable spindle speed control in two ranges, and digital position readout system ensure high accuracy and repeatability in single-piece and small-batch production. Main Advantages of the Machine Rigid cast-iron base and column – provide excellent stability during machining of demanding workpieces, reduce vibrations, and extend tool life. Continuously variable spindle speed control in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Allows optimal selection of cutting parameters depending on tool diameter and material. 2-axis digital readout system (DRO) – enables fast and accurate positioning while reducing setup time and eliminating reading errors from manual scales. Automatic spindle feed – ensures smooth cutting performance and reduces the risk of drill breakage during deep drilling operations. Thread cutting function – after reaching the preset tapping depth, the spindle automatically reverses direction. Ground gears – provide quiet transmission operation and stable spindle torque. Dovetail slideways on machine axes – ensure precise table movement and accurate geometry. Rotating head ±90° with height adjustment – allows easy execution of angled machining operations, chamfers, and undercuts. Left/right spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively removes heat from the cutting zone, prevents overheating of tools and material, improves machining accuracy, and extends cutting tool life. The core of the machine is a heavy cast-iron structure with wide guideways, minimizing deflection during face and end milling operations. The large cross table provides a spacious working area and features a precisely ground surface to ensure accurate workpiece positioning. The spindle with an MK4 taper is driven by an S1/S6 1.5/1.8 kW motor with variable speed control. The integrated cooling system stabilizes the cutting temperature and improves the quality of machined surfaces. The combination of a 2-axis DRO system, ground gears, and rigid guideways provides excellent dimensional repeatability and high surface finish quality. The automatic spindle feed and two-speed spindle range allow optimal machining parameters for: drilling in steel up to Ø32 mm, drilling in cast iron up to Ø45 mm, face milling up to Ø80 mm, end milling up to Ø28 mm. Standard Equipment Variable spindle speed control 2-axis digital readout system (DRO) Ø80 mm milling cutter head with inserts Dcedpfxeyapyrj Albel Drill chuck Cooling system Technical Specifications Parameter Value Maximum drilling capacity – cast iron (HT200) 45 mm Maximum drilling capacity – steel 32 mm Maximum face milling diameter 80 mm Maximum end milling diameter 28 mm Working table dimensions 820 × 240 mm Table travel (X/Y) 595 / 185 mm Maximum tapping capacity M24 Spindle taper MK4 Motor power (S1/S6) 1.5 / 1.8 kW Low spindle speed range 75–438 rpm High spindle speed range 438–2500 rpm Spindle travel – manual 107 mm Spindle travel – automatic 100 mm Distance spindle axis to column surface 250 mm Maximum distance spindle nose to work table 445 mm Net weight 350 kg Overall dimensions 1084 × 924 × 1550 mm Height with base 2150 mm

Condition: good (used), Year of construction: 2002, machine/vehicle number: 025137, Offer 24190 Technical specifications: - Drilling capacity: 25 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 140 mm - 8 spindle speeds: 100 - 2900 rpm - Min./max. distance spindle/table: 110 / 405 mm Dedpfx Aewyl H Nelbecl - Work light - Quick-action drill chuck - Coolant device - Machine vice - Machine base - Drive: 400 V / 0.75 kW - Required space (W x H x D): 400 x 1250 x 600 mm - Weight approx.: 200 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0008951 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Dsdpov Hp Rmjfx Albocl

Condition: used, functionality: unexamined, Ferwood Code: RU0008953 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Dcodpfx Aov Hp R Tslbsl

Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Dcodpfx Asvxth Hslbol Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification Parameter Value Model ZX7045B VARIO Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Dedpfjyvh Hqjx Albjcl Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: used, bore capacity in steel (diameter) / mm throat / mm bore stroke 70 mm Dodpfx Aoy Tbv Tolbscl total power requirement 0,9 kW

Condition: new, Year of construction: 2026, ZX7045 B1L milling and drilling machine is a versatile drill-mill designed for precision metal machining in workshop and production environments. The machine combines drilling and milling functions, ensuring stable operation thanks to its heavy cast-iron construction and a wide spindle speed range. It is a solution for facilities that require repeatability, rigidity, and real productivity. Main advantages Heavy, stable cast-iron body – minimizes vibrations during milling and drilling Automatic spindle feed (125 mm) – improves efficiency in batch operations Height adjustment on the support, not the column – greater setup precision Dcodsy E Hk Hjpfx Albsl 12 spindle speed ranges up to 3200 rpm – adaptable to material and tooling Equipped with coolant system – stable cutting conditions and extended tool life Dovetail guideways – high rigidity and movement accuracy Tilting head ±90° – enables angled machining Quiet operation thanks to ground gears and capability of both left- and right-hand rotation Construction and technology The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. Its heavy base and cast-iron body ensure high system rigidity. The cross table (1000 × 240 mm) features a precision-ground working surface, allowing accurate workpiece clamping. The MT4 spindle taper enables the use of a wide range of tools, including end mills, face milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered at 400 V, ensures stable performance even at larger milling diameters. Precision and performance With X/Y/Z travels of 560 / 190 / 430 mm, the machine supports a wide range of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. Adjustable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow parameters to be tailored to the material and quality requirements. Standard equipment Drill chuck arbor MT4/B18 Drill chuck 3–16 mm / B18 Reduction sleeve MT4/MK3 Reduction sleeve MK3/MK2 Basic tools User manual (Polish) Optional equipment Machine stand Automatic X-axis feed Swivel, tilting, and precision vises Rotary tables and dividing heads Tapping heads and milling heads Tool holders and drive arbors Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face mill diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) Spindle taper: MT4 Spindle feed: 125 mm (automatic) Table size: 1000 × 240 mm Base dimensions: 440 × 600 mm Max. spindle-to-table distance: 445 mm Spindle-to-column distance: 262.5 mm X/Y/Z travel: 560 / 190 / 430 mm Quill feed rates: 0.12; 0.18; 0.25 mm/rev Head tilt (left/right): 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 375 kg

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm Dcjdpjzgaiisfx Albol throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: good (used), Storage location: 3110 Manufacturer: MAXION Year of manufacture: 2006 Machine number: 186477 Type / Model: BT18STP Drilling capacity: 30 mm Threading capacity: M25 Spindle mount: MK 2 Speed range: 120 to 2,160 rpm, continuously variable Overhang: 230 mm Vertical adjustment: 300 mm Table: 600 x 600 mm Clamping area: 300 x 330 mm Stroke: 120 mm Distance table - spindle nose: 40 to 310 mm Vertical adjustment: 270 mm Total power consumption: 1.3 kW Accessories / Equipment: Belt adjustment Condition: good Footprint: 800 x 800 mm Weight: 160 kg Dimensions with table: 600 x 600 x 1,200 mm Dedpfezcuypox Albocl

Year of construction: 1989, condition: used, functionality: fully functional, Lot of 13 used machine tools: Lathes, milling machines, radial drill, grinding machine, grinding wheel. Dedpfxszg E Hyj Albjcl TRANSPORT TO BE AGREED UPON DURING PURCHASE OR QUOTATION: - MT180 TRIFASE Lathe - INGERS 175 three-phase Lathe - LEGOR 300 three-phase - ANSELMI 180 three-phase Lathe - Idroming 600 (DRM) - Grinding machine - BERGONZI FS 870 Radial drill - FRESA Prvomajska 1 - FRESA Prvomajska 2 - SERRMAC RAG 25/L three-phase pillar drill - ITALERI three-phase pillar drill - BIMARK MOD. 30 three-phase pillar drill - Fratelli Rosa Milano three-phase pillar drill - Salmoiraghi three-phase grinding wheel Technical details for each machine are shown in the photos. Transport costs to be determined during the quotation process. For any further information, please do not hesitate to contact us. Machines intended for countries outside the EU. ----- Price: 12,900 EUR, VAT excluded + TRANSPORT COSTS TO BE BORNE BY THE PURCHASER -----

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Dedpfx Aezkmfxelbocl

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Urban ESB 500 corner and scissor drilling unit with drill heads for Siegenia fittings Dcjdpfx Aloyza Dfsbol

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Dedpjywh Hmefx Albjcl

Condition: excellent (used), Numerical Control Type NC 400 Deluxe Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 1 Splindles for each horizontal drilling head (N°) 20 Max. working width (mm) 3200 Dodpfoyyw Sdox Albecl Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Transport belts to evacute chips (wastes) (N°) 2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts Total installed power (Kw)

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Dcedpfozrr Uuex Albsl Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns