Used Fz 37 for sale (10,323)

Condition: used, Gear motor, electric motor -Speed: 37/74 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 345/200/H185 mm Isdjc U Rhgspfx Affstr -Weight: 14 kg

Condition: used, mileage: 458,862 km, power: 206 kW (280.08 HP), first registration: 11/2009, fuel type: diesel, number of seats: 32, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, parking heater, +++Original KM+++ Engine: Scania Emission class: EEV Gearbox: Automatic Seats: 28+3+1 high/fixed Safety * Retarder * ABS, EBS * Fog lights Passenger compartment * Auxiliary heating * Driver microphone * Stroller space * Wheelchair RAMP * Wheelchair space * Stop request Exterior * Matrix Lawo * Double-width door 2x * Raising/lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Roof hatches Audio [&] communication * Radio * CD * USB on radio Other * German vehicle registration document * Vehicle dimensions: length 10.88 m, width 2.55 m, height 2.98 m * Twin tires * Tires: VA 40%, HA 30% Isdpfjv Dcwuox Affjtr Our internal vehicle number: 11316 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: excellent (used), Loher electric motor 37 kW Itedpfx Afsiqfbysfsr Type ANGA-2255E-04D

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 300-01, spindle speed (max.): 12,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 425 mm, number of slots in tool magazine: 108, swivel angle B-axis (max.): 101 °, No minimum price - guaranteed sale to the highest bidder! Machine with counter spindle and swiveling turntable TECHNICAL DETAILS Control system: Siemens Sinumerik 840 D X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 425 mm B1 swiveling axis: 101° BT axis: 0 – 180° V-axis in working area: -40 to -496 mm V-axis outside working area: up to 570 mm Z-axis (rotary axis): approx. 450 mm Spindle data Main spindle speed: 12,000 rpm Rotary spindle: 4,000 rpm C-axis: 6,500 rpm A-axis: 4,500 rpm Speed for driven tools: 4,500 rpm Tool holder Main spindle tool holder: HSKA 63 Turret tool holder: Capto 4 Tool holder diameter: 63 mm Tool magazine Itjdpfx Aowpt Akjffer Tool turret: 12-position with driven tools Tool changer: 32-position Additional magazine: 64-position MACHINE DETAILS Operating voltage: 400 V Frequency: 50 – 60 Hz Rated current: 125 A Connected load: 70 kVA Dimensions and weight Installation size (L x W x H): 8,565 x 5,150 x 2,750 mm Total weight: 18,000 kg EQUIPMENT - Coolant system - Breuning Simag bar loader, year 2014 - Tool measurement system - ICS with 70 bar internal cooling - Motorized safety door - Technical documentation - Manual - Continuously variable speed - Transport possible on standard truck

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, TECHNICAL DETAILS Control: Sinumerik X travel: 550 mm Iedpfx Afowtravefetr Y travel: 300 mm Z travel: 425 mm Rapid traverse: 30 m/min Spindle mount: ISO SK 40

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Ijdsvy A Tnspfx Affotr Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 55 rpm Iodpfx Aochi T Ejffotr -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Dimensions: 590/229/H250 mm -Weight: 29 kg

Condition: used, Year of construction: 1993, machine/vehicle number: 4803678, overall weight: 11,200 kg, Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01. Ijdsvyfmqopfx Affstr

Condition: excellent (used), Laska mobile micro cutter Ijdjv Ukl Ijpfx Affotr -Model: FZ 225 -Power: 132 kW -Dimensions: 2220 x 1170 x 1280 mm -Set diameter: 225 mm -Hopper capacity: 200 L -Weight: 1500 kg -Power supply: 400 V 50 Hz 3N -Cutting set and additional parts included -Stock quantity: 1 -Condition: used

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Itodjt Hdh Nepfx Affsr Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. Itsdpfx Ajwlp Hdjffor We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: excellent (used), Year of construction: 2012, ALUP ALLEGRO 37 10 screw compressor, machine with inverter after service Technical data: capacity: 6.06 m3/min; motor: 37 kW; Isdpfew Awiuex Affjtr maximum pressure: 9.5 bar; year: 2012; hours: 12,321 h; compressor fully functional, with warranty.

Condition: used, Electric motor, three-phase motor -Manufacturer: VEM, electric motor type ALK 37/4M Itjdpjggcmvofx Affsr -Power: 2.6 kW -Speed: 1410 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Number: 2 motors available -Price: per piece -Dimensions: 430/310/H270 mm -Weight: 34 kg/piece

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 2,750 kg, total height: 2,470 mm, total length: 2,000 mm, total width: 1,530 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 500 Rotor width (mm): 720 Power (kW): 37 kw Knives on rotor (pcs): 27 Fixed knives (pcs): 4 Weight (kg): 2750 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock) Itedpfxorbg Dts Affsr

Condition: good (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, travel distance Y-axis: 400 mm, rapid traverse X-axis: 300 m/min, rapid traverse Z-axis: 425 m/min, Chiron machining center type FZ 15 W high speed with chip conveyor year 2001 with turntable 12,000 rpm internal cooling. X 300 Y400 Z 425 Itodpfjvtca Ujx Affjr 2 pcs available more pictures can be sent

Condition: excellent (used), Year of construction: 2020, operating hours: 6,561 h, volume flow: 5.6 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, HERTZ HSC 37 screw compressor 37 KW engine, Capacity 5.6 m3/min, Pressure 10 BAR. Year of production 2020 Mileage 6561 hours The compressor is fully functional, practically like new, exhibition condition. Itodpfxjtqn Swj Affer

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. Itodpfxef Dc D Ho Affsr liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. 1 piece control valve, 4 pieces pressure measurement with display, 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, 1 piece pre-assembly of the plant in the factory of the contractor,

Condition: new, maximum load weight: 12,200 kg, overall weight: 15,000 kg, loading space length: 7,005 mm, loading space width: 2,300 mm, loading space height: 2,200 mm, loading space volume: 37 m³, total width: 2,450 mm, total height: 2,450 mm, Year of construction: 2025, Brand new roll-off container for building rubble, waste etc. * Steel container in lightweight design * 50 mm support bracket * Rear doors with safety lock * Steel floor 5 mm * Right-sided access at the front * Tarpaulin holders on all sides * Capacity 37 cbm * Tare weight approx. 2,800 kg * Initial container inspection according to BGI 5005 Itodpfx Ajmxgi Hsffor Further containers in heavy-duty design DIN 30722 part with 60 mm support bracket in stock. For further information please do not hesitate to contact us

Condition: used, Electric motor, three-phase motor -Manufacturer: VEM, electric motor type ALK 37/4M -Power: 4 kW -Speed: 1410 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 Ijdpfxjggcm Ss Affjtr -Dimensions: 460/310/H270 mm -Weight: 38 kg

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm feed rate 5-30 m/min. sawing motor 37 KW (also more KW possible) feed motor 2,2 kW max. saw blade insert at 145 mm 6 saw shaft diameter 70 mm weight 3.200 kg Special equipment Electrical height adjustment of the infeed rollers Laser with adjustment device Driven roller gear Electronic braking device Iodpeu I Dmofx Affotr

Condition: used, power: 37 kW (50.31 HP), Item No.: Geb 22 Type: ART 711 / N1S Item condition: used, good condition Available: immediately Conveying volume: 20,000 m³/h Itsdpfx Afswnm Hgjfsr Conveying pressure: 45 mbar Revolutions: 1470 rpm Weight: 780 kg Suction flange: 435 mm diameter Pressure flange: 450 x 320 mm Motor Brand: Siemens Power: 37 KW Voltage: 3 x 400 Volt Revolutions: 37 rpm

Condition: new, +++++ We manufacture the original +++++ Non-binding offer Copper cable recycling machine 1 piece GA 37- 450 granulator cutting unit - completely mounted -incl. motor ( 37 KW ) - with inlet hopper, outlet hopper and belt protection cover - 1 set of knives ( 5 rotor knives and 2 stator knives ) - 1 sieve - mounting, system - integration in your plant Itjdpfxoflkz Hs Affsr - ex our factory Our general terms and conditions apply

Condition: used, Gear motor, electric motor, electric gear motor Itjdpfx Afec U Dpijfor -Speed: 37 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: -Brake: 220 V -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H165 mm -Weight: 19 kg

Condition: used, Three-phase motor, electric motor -Power: 37 kW -Speed: 1480 rpm -Shaft: Ø 42 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 820/550/H450 mm Itedpsc Il Dzsfx Affsr -Weight: 330 kg

Condition: used, Three-phase motor, electric motor -Power: 37 kW Itodpfxscwtprs Affor -Speed: 2945 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 710/450/H430 mm -Weight: 185 kg