Used Fz 08 for sale (4,411)

Condition: used, Bore: 40 mm Cutting circle (ø): 125 mm Length: 240 mm Material: aluminium Blades: strip planer blades Z2 Fedpewma T Rofx Alqegb

Condition: used, Year of construction: 1989, operating hours: 12,142 h, functionality: limited functionality, Equipment: chip conveyor, documentation/manual, For sale: 1989 Chiron FZ22 W machining center with dual pallet system. The machine operates accurately. Occasionally, there is a tool change error— the tool is not properly positioned into the spindle. Compatible with SK40 tool holder. Fitted with Sinumerik 810 control. Comes with chip conveyor and Knoll AE 1058.009 water treatment system; all machine manuals are included. Can be demonstrated under power upon request, currently not in production. Loading assistance is not available. Fgedpeymbdiefx Alqsb

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed Fsdpfx Alswz Rifsqjgb - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: excellent (used), Livio Macchia 08 LPT lathe part grinding machine Two grinding units Oscillating polishing brushes Fjdpfx Aeydn Amelqsgb Template-guided operation

Condition: used, Year of construction: 2012, Overview The filler was built in 2012 by Italian manufacturer Framax. The filler comes with a Framax labelling machine. The machines have been regularly maintained and is already dismantled. Both machines can be viewed in person. Techn. Details Capacity: 1,800 bph (max. 2,200 bph) Processed format: 0,33 L Crown cap Filling monoblock | Framax | RFC‐09/08/1‐C 2K A/P | 2012 Rinser positions: 9 Filler positions: 8 Capper positions: 1 Suitable for natural beer Type of filling valve: EVO2 (15 mm) Max. diameter of bottle: 115 mm Min./ Max. height of bottle: 200 mm/ 350mm Dimensions: Length: 4,500 mm Width: 1,250 mm Height: 2,500 mm Fsdpfx Ajrlf Tqjlqjgb

Condition: used, Year of construction: 2004, functionality: fully functional, tool weight: 7,820,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used CHIRON FZ 15 S / W vertical machining center, year of manufacture 2004. Manufacturer: CHIRON Model: FZ 15 S / W Year of manufacture: 2004 Condition: used Category ID: 1281 Type ID: 4156 Machine type: vertical machining center If you have any questions or require additional information, please feel free to send us a message or call us. Fgedpjykt Rcsfx Alqsb

Condition: repair required (used), Year of construction: 1988, operating hours: 25,656 h, functionality: limited functionality, overall weight: 5,000 kg, We are offering this Chiron FZ 22 W with pallet changer, year 1988, in need of repair (display defective). Fodjykrmpjpfx Alqegb

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Fjdpsx Ifdksfx Alqsgb Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Fgodpfx Alowywcioqob Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Fgedpfx Aevy A Tnolqeb Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control, Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 sec Fsdpfx Ajxwwc Uelqegb Max. drive power 18.5 kW Speed range up to 10,500 rpm EQUIPMENT/ACCESSORIES - Automatic tool changer ATC 40 - Long part machining/pendulum machining (center partition not included) - Splash guard enclosure with sliding doors, electrically secured, incl. machine light - Coolant unit with high-pressure pump and paper band filter Tank capacity 500 l, normal pump 200 l/min at 1.5 bar High-pressure pump 50 l/min at 20 bar, incl. double switch filter - Through-spindle coolant supply (IKZ) - Chip conveyor with ejection height 1050 mm - Rinsing gun - 1 NC rotary table with chuck - 1 hydraulic tailstock - 1 clamping bridge - Electronic handwheel - Mounting elements - Documentation

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Rototilt Cable Bucket / 08-400 / MS08 / 400 mm cutting width / NEW / in stock & immediately available Price: €2,090.00 net / €2,487.10 gross - Own weight approx.: 160 kg - Capacity: 150 liters - Cutting width: 400 mm We have many more buckets and attachments in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing offers available on request. We are an official sales and service partner for: - Magni telehandlers - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS Fgedjykhrhjpfx Alqjb - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Rototilt attachments! Errors and prior sale excepted! = Further information = New: Yes Application: Construction Please contact Marius Herden for further information.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling Fgodpfx Ajxrb Tgslqjb - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 800 kg, Carton clamp Fgedpfjyi I Rzex Alqsb ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 2A (41 cm) Capacity 800 kg Sideshift valve Width 950 mm Clamps 870x800 mm ID OS1841

Condition: used, Year of construction: 2003, MANUFACTURER: ALUP Fsdoyi D Hrepfx Alqsgb MODEL: SCK 101-08 Serial number: 217586 Year: 2003 Power (kW): 75 Capacity (m³/min): 12.9 Pressure (bar): 8

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 450 kg, lifting height: 8,000 mm, overall weight: 2,830 kg, empty load weight: 2,830 kg, fuel type: electric, tire condition: 100 %, drive condition: 100 %, maximum load weight: 450 kg, Equipment: UVV, Work Platform Spider Lift Track Platform CAPRI 08-10 We offer you: Spider Lift Cabri 08-10 Brand new machine, year of manufacture 2025 Working height: 10 meters Platform height: 8 meters Machine dimensions: 262 x 139 x 240 cm Platform load capacity: 450 kg Outreach load capacity: 113 kg Platform size: 227 x 112 cm Platform extended: 317 x 112 cm Machine weight: 2,870 kg Integrated charger in the machine 48V/25A 2 drive motors installed, each 2x48V/4 kW Climbing ability: 25% Advantages of Cabri platforms: ECU & control unit from a reputable brand manufacturer installed Upgraded batteries installed Fully electric operation Emission-free operation Heavy-duty crawler undercarriage Non-marking tracks Robust design The machine’s weight is evenly distributed via the lightweight crawler tracks, which greatly reduces ground pressure. Therefore, it is particularly suited for indoor applications on sensitive floors with limited load capacity. Non-marking tracks leave no marks. All-terrain spider lift with up to 25% climbing ability Fgjdpopwb Huofx Alqob Can overcome ground obstacles Suitable for work on uneven terrain Excellent traction enhances ground adhesion Highly maneuverable, even in confined spaces Low maintenance and service costs due to AC technology This advertisement does not constitute a binding offer and is for illustration purposes only. All details are provided to the best of our knowledge. Errors, typos, and prior sale excepted. You will receive an invoice with VAT shown. Shipping is possible at extra cost.

Year of construction: 2023, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Intermercato TG 22 PRO-SR5 Grapple Saw / 5-Tine Grapple / incl. MS08 Adapter Plate / in stock & immediately available / Year of manufacture: 2023 Price: €10,890.00 net / €12,959.10 gross - Weight (kg): 156 - Cross-sectional area (m²): 0.20 - Max. operating pressure (bar): 200 - Oil flow (l/min): 50 - Closing force (kN): 11.6 - Excavator class: 4–10 t - Grapple opening width (mm): 1,225 - Max. capacity (kg): 3,000 Equipment: - incl. MS08 adapter plate - incl. hydraulic hoses as shown in photos We stock many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) for immediate delivery. Our warehouse offers a very large selection of various grapples, all immediately available! Mr. Herden is happy to assist you (by phone at ...). Upon request, we will gladly provide you with a financing offer. We are an official sales and service partner for DMS, Holp, OilQuick, Westtech, Weber MT, Magni Telehandlers, Seppi M., JCB Construction Equipment, Mercedes-Benz, and Iveco. In addition, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Intermercato range! !!Errors and prior sale excepted!! Internal ID: 3068 Fgjdpjyii Ufefx Alqsb = Further information = New: No Empty weight: 156 kg Suitable for: Forestry applications Please contact Marius Herden for more information.

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding Fgsdpfx Asq H Aqxslqeb - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2008, condition: ready for operation (used), Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. Fgedpfolvu Rujx Alqsb

Year of construction: 2008, condition: ready for operation (used), A 5-axis CNC milling machine Geiss with full encapsulation is available. Travel X/Y/Z: 2500mm/2200mm/760mm, tool holder: ER25, spindle power: 11kW, milling head type: orthogonal milling head, control: Siemens Sinumerik 840 Di solution line. Documentation available. On-site inspection is possible. Fodpfx Ajwih Alolqjgb

Condition: ready for operation (used), Year of construction: 2005, A machining center is available. Travel X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, speed: 10500rpm, tool positions: 20, tool holder: SK40, table load: 300kg, control: Siemens Sinumerik. The screen of the machine is defective. Documentation available. On-site inspection is possible. Fgjdpfx Ajwxfa Helqjb

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Fgjdpfx Aoycwrbolqjb

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Fjdpfoycwtfex Alqogb

Year of construction: 1988, condition: ready for operation (used), Verfahrweg X/Y/Z: ca. 1600mm/400mm/425mm, Tischdimensionen X/Y: 1500mm/400mm, Werkzeugaufnahme: SK40, Werkzeugplätze: 20, Spindeldrehzahl: 5000U/min, Maschinendimensionen X/Y/Z: ca. 4000mm/2500mm/2900mm, Gewicht: ca. 7000kg, Steuerung: Siemens Sinumerik System 3, Betriebsstunden: ca. 19855h. Inklusive ca. 12 Werkzeughalter. Documentation available. Eine Besichtigung vor Ort ist möglich. Fedpswaa Inefx Alqjgb

Condition: excellent (used), Year of construction: 2002, CHIRON FZ 15S with 4 axis in Perfect Condition Machine can be inspected any time under power Fgedpfx Alorgqu Hjqob