Used Fuw 250 for sale (10,107)

Condition: new, Material number 16 Cr Mn 5 Width of the centring groove 32 mm Length 90 mm Width 60 mm Lrodpsb Rmx Hofx Ad Njg Height 54 mm

Year of construction: 2010, condition: excellent (used), Three-jaw chuck Make Forkardt F 250 Thread adapter 105 x 6 mm Cylinder diameter 105 mm outer diameter 250 mm Lodpsfb T Dbofx Ad Nsrg Inner diameter 63 mm Chuck height with flange 180 mm Age was estimated

Condition: excellent (used), Face drivers diameter 250 mm Ledpfx Aef Dx Sked Nerg clamping range : 120 - 200 mm max. speed 3500 rpm. weight 30 kg

Year of construction: 2014, condition: used, New: No Lrodpjyawz Rofx Ad Nog Applicable material: Manure Power: 33 kW (45 HP) Length: 600 cm Attachment suited for: Agricultural machines

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 930 mm stroke 200 mm Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s Lrjdpfxsvuk Trs Ad Njg oil volume 350 l power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m with infinitely variable drive, material inlet inclineable, straightening rolls individually manually adjustable, pneumatic opening of the upper roller cassette, coil loop control via arm as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request Lsdpfxovuk Sbo Ad Norg

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Ljdpfx Aovuuknod Njrg Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1996, pressure 250 t distance between columns 2100 mm stroke 300 mm Distance table/ram, stroke up 850 mm Table surface area 2000 x 1300 mm Table height above floor 900 mm Side window 1300 mm Ram surface 2000 x 1300 mm Oil volume 1300 l Ljdpfxjvuuide Ad Norg Power capacity 60,0 kW Weight 39,5 t Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2006, pressure 250 t distance between columns 3000 mm stroke 600 mm Ljdpfx Adsvuuhae Nerg Distance table/ram, stroke up 900 mm Table surface area 2500 x 1300 mm Table height above floor 1050 mm Side window 1350 mm Ram surface 2500 x 1300 mm Speed down 500 mm/s Speed up 400 mm/s Working speed 36 - 64 mm/s Oil volume 2700 l Power capacity 137,0 kW Weight 54,0 t Dimensions (WxDxH) 4,1 x 4,55 x 6,15 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Lrjdpfsvuuaiex Ad Njg Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 1971, Pressure 063 t throat 250 mm Lrjdpfxsvut T Us Ad Njg stroke 16 - 90 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 350 mm table surface area 730 x 500 mm hole in the table 180 x 180 mm table height over floor 710 mm ram surface 350 x 220 mm ram adjustment 50 mm dimensions (WxDxH) 1,3 x 2,2 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch (Ortlinghaus), manual stroke adjustment, manual ram adjustment, fix table as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm stroke 600 mm Distance table/ram, stroke up 1000 mm Lrjdpfx Adjvut Tns Nsg table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m Lsdevuk Enjpfx Ad Nerg permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Nakamura Tome WT 250 CNC Lathe (2008) Manufacturer: Nakamura Tome Model: WT 250 CNC Lathe Year of manufacture: 2008 Condition: used, good, and currently under power in production Control: Fanuc 18i 4 axes: X, Y, C, Y 2x spindle 2x turret (equipped) Turning diameter: 250 mm Turning length: 555 mm Main spindle speeds: 50–4,500 rpm Sub spindle speeds: 5,000 rpm Lodpfx Adex Tir Ne Njrg Turrets 1+2: 24 stations, each with 12 driven positions Gantry loader GR 203 Band filter system Chip conveyor Documentation Tools Accessories

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES Lredpfxexft Dwe Ad Neg – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR Ledpfxerf Tahe Ad Norg (Prices may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 1992, Arburg 370C-1000-250 Clamping force: 100 tons Year of manufacture: 1992 Lrodjxvddcopfx Ad Nog Screw diameter: 35 mm Tie bar distance: 37x37 cm

Condition: excellent (used), Year of construction: 2003, Engel ES,1350/250 HL Clamping force: 250 tons Year of manufacture: 2003 Ledpfxoxvmndj Ad Nerg Screw diameter: 55 mm Injection volume: 618 cm³ Enlarged mounting platen 1050x900 mm Crane traverse x3 Air valve x3 Plus: Engel robot E - PIC Z Year of manufacture: 2017

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80, clamping force 25 tons, screw diameter 25 mm, year of manufacture 2003, sprue picker included. Lsdpfx Ajx Em E Rjd Njrg

Condition: defective spare-parts repository (used), Year of construction: 2003, Demag Lrodpfx Adsx Em Hns Neg Ergotech - system 250/280-80 Clamping force 25 t Screw diameter 25 mm Year of manufacture 2003 Pump defective (minor issues) Sprue picker

Condition: excellent (used), Year of construction: 1999, Engel ES 1350/250 HLST Clamping force 250 tons Screw diameter 70 mm Lrjdpfxswyw Ixs Ad Nsg Injection volume 1000 cm3 901 g Year of manufacture 1999 Enlarged clamping platen 1050x900

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80 Lodpfx Ashrw Amod Nsrg Closing 25 TO Scrow 25mm Year of manufacture 2003 Sprue picker 2x PIECES

Condition: excellent (used), Year of construction: 2002, Arburg 270 S-250 - 60 Clamping force: 25 tons Year of manufacture: 2002 Tie bar spacing: 27 x 27 cm Control system: S Lrjdpfox I Rdvox Ad Neg Includes conveyor belts

Condition: excellent (used), Year of construction: 2003, Arburg 420C-800-250 Closing 80 tons Scrow 30 mm Ljdpopdr Dcsfx Ad Nerg year 2003 Spars wide 42x42 Spray weight 97 g

Condition: excellent (used), Year of construction: 1999, Engel ES 1350/250 HLST Clamping force: 250 tons Screw diameter: 70 mm Injection volume: 1000 cm3 901 g Year of manufacture: 1999 Lsdpfoxu Rktox Ad Nsrg Enlarged clamping plate 1050x900 mm