Used Fss 315 for sale (5,146)

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided • Drawing cushion: Integrated • Counterbalance cylinders: Yes Fgodpfx Ajzcptwelbeg • Safety system: Integrated • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2013, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Main technical data: • Press capacity: 315 Ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above Bottom Dead Center (BDC) • Normal crankshaft stop position: Top Dead Center (TDC) • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24 engagements/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: Double upright (straight-side) frame • Drive system: Double connecting rod (double pitman) • Slide guidance: Guided slide • Motion type: Mechanical crank press • Slide movement: Vertical reciprocating motion • Main axis movement: Rotary crankshaft drive • Ram adjustment: Motorized slide adjustment • Cushion system: • Type: Integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Systems and safety: • Counterbalance cylinders: Yes • Counterbalance force: 102 kN at 6 bar • Clutch & brake system: Pneumatic • Lubrication system: Centralized automatic lubrication • Safety system: Integrated • Operator protection: Included • Automation ready: Yes • Performance and safety notes: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) Fgodezcppxopfx Albog • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: used, *VILAR LASSEUR VL 315 GRINDER - 1992 - Carbide Tool Sharpening* French VILAR Chatellerault grinder, Type *VL 315* - No. *315.256* - Date: *06/29/92* *Complete equipment:* - Cross table with carriage + swivel table for workpieces - Universal, inclinable tool holder - Long arm for lathe tool holder / carriage tool Fgsdpfx Ajzxt Hfelbsg - Diamond grinding wheel, housing, coolant system - Remote control box, emergency stop button - Articulated lighting lamp - Original green Vilar sheet metal base 400V - In working condition, from a precision engineering workshop On a pallet - Approx. 350 kg - Easy to transport Video available upon request.

Condition: used, Year of construction: 2010, saw blade diameter 315 mm dimensions of saw-blade 350 x 40 x 2,5 mm cutting diameter 90 mm capacity 90 degrees: flat 150 x 90 mm capacity 45 degrees: round rechts & links 90 mm capacity 45 degrees: flat rechts & links 105 x 90 mm capacity 60 degrees: round 90 mm capacity 60 degrees: flat 75 x 70 mm cutting speed 33 / 66 m/min total power requirement 1,8 kW weight of the machine ca. 340 kg dimensions of the machine ca. 900 x 800 x 1700 mm Features: - With miter adjustment 60° left / 45° right Fjdpfxev Td Hvo Albjgg - Coolant device - 2 speeds - Saw blade - Machine base - Operating instructions

Condition: new, functionality: fully functional, Spare parts for Fritz Heckert milling machines F315, F400 - even for the oldest ones. We offer a full range of spare parts for milling machines – the old and new German WMW HECKERT milling machines F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. Fgodpjvtnfpefx Albsg In our stock one can find: milling machine head and all gears for it, dividing heads, lunette/rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross screws, nuts, oil pumps, cooling pumps, spindles, quills, hydraulic dividers/distributors etc. All the original parts for Heckert milling machines we can offer directly from stock, ready for immediate shipment. All parts are new, executed in German quality, and meet the highest technical standards.

Condition: excellent (used), overall weight: 60 kg, Three-jaw chuck Fgodpfx Aszw U Stjlbeg Manufacturer: Forkhardt Model: F 315 Diameter: 315 mm Height: 120 mm Jaw height: 175 mm Weight: 60 kg

Condition: good (used), Year of construction: 2016, saw-blade dia. 315 mm cutting capacity - round 100/ 90° mm cutting capacity - square 90 x 90 /90° mm cutting capacity - flat 85 x 110 / 90° mm cutting capacity - flat 85 x 85 / 45° mm cutting capacity - round 100 / 45° mm cutting capacity - square 85 x 110 /45° mm saw blade turning speeds 25 / 50 U/min voltage 400 V / 50 Hz Motor output 1 kW machine weight ab. 0,24 t Dimensions (L/W/H) 980 x 790 x 780 mm • unused exhibition machine • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, Fgsdpfx Alovxlkasbog • coolant device, • mitre ability: 45° left, 45° right

Condition: good (used), functionality: fully functional, Technical data (according to nameplate): • Manufacturer: Heckert Werkzeugmaschinen GmbH • Model: FU 315 • Year of manufacture: 1997 • Machine no.: 19019 • Temperature range: +5 to +35 °C • Total weight: approx. 3.1 t • Made in Germany Equipment / Features: • Universal milling head • Infinitely variable or widely graduated feeds (see diagram on the machine) • Coolant system • Electrical control cabinet (clearly arranged) • Digital display (see photos) • Heavy-duty machine construction • Very quiet operation Fedpfx Aloymd Idsbegg

Condition: used, mileage: 123,195 km, power: 110 kW (149.56 HP), first registration: 08/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2027, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 126 MERCEDES-BENZ SPRINTER 315 MAXI HIGH + LONG. 1st HAND: MAINTAINED ACCORDING TO SERVICE SCHEDULE. Paint code: * 7224 Paint color Graphite Gray MB 7224 Interior: * Fabric, black Equipment: * 219L Hamburg * 7224 Paint color Graphite Gray MB 7224 * 804 AEJ X3/1 * A50 Front axle with increased load capacity * AR3 Axle ratio I = 4.182 * BH2 Control code, hydraulic system variant 1 * BK2 Control code, disc brake configuration 2 * C6L Multifunction steering wheel * C907 - * CB7 Stabilizer level I * CL1 Steering wheel adjustable in inclination and height * CW2 Deletion of vehicle lowering system * D03 High roof * D50 Fixed partition * E07 Hill-start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * E43 Trailer socket, 13-pin * ED4 Fleece battery 12 V 92 Ah * ES0 Jump-start contact * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F3F Passenger-optimized gear selector console * F68 Heated and electrically adjustable exterior mirrors * F907 - * FF4 Storage compartment above roof lining * FF5 Storage compartment above windshield * FJ4 Storage compartment under dashboard * FKA Panel van * FR8 Rear-view camera * GD8 6-speed manual transmission ECO Gear * H20 Heat-insulating glass all around * HH9 Semi-automatic climate control system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * ID0 Filler anthracite * IE0 Model series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IR6 Wheelbase 4325 mm, overhang 1615 mm * IT4 3.5-ton vehicle * J10 Speedometer km/h * J55 Seatbelt warning system for passenger seat * J58 Seatbelt warning system for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JG0 Shift point indicator * JH3 Communication module (LTE) for digital services * JI7 Start mileage, maintenance interval 60,000 km * K13 Main tank 71 liters * KP7 Exhaust gas purification SCR generation 4 * L Left-hand drive * L94 Deletion of parking lights * LA2 Headlamp assist * LB1 Side marker lights * LB5 3rd brake light * LE1 Adaptive brake light * LX5 Europe * M60 Generator 14 V/250 A * M72 Vehicle HVO-capable * MJ8 ECO start/stop function * MS1 Cruise control * MT6 Emission class Euro 6D N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * Q11 Longitudinal member reinforcement * QA8 Trailer coupling for increased trailer load 2.8/3.0 tons * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel wheels 6.5 J x 16 * RZ2 Wheel manufacturer Magnetto Wheels * S02 Driver's seat * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S23 Passenger seat, two-seater * SA5 Airbag, driver * SK2 Seat occupancy recognition for driver's seat * T16 Sliding door, right Fjdpfx Aljzz Erfebogg * T77 Grab handle, entrance, loading area sliding door at partition * T86 Grab handle at rear corner pillar, right * V43 Wood flooring * V94 Cable duct on side wall * V95 Cable duct on rear portal * VF7 Fabric Maturin, black * WB9 Control code, factory * WD8 Control code, factory * WM3 Control code, factory * WM4 Control code, factory * WZ7 Control code, factory * X30 Vehicle registration certificate part 2 * X99 Manufacturer

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Fodpfx Aljzrptujbjgg Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Oil volume 1400 l Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m with oil-hydraulic drive, hydraulic drawing cushion in table

Condition: good (used), Year of construction: 2004, operating hours: 12,582 h, lifting height: 3,150 mm, fuel type: diesel, mast type: duplex, construction height: 2,150 mm, Linde H20D Duplo 315 Freelift / Sideshift / 4th Function, VW Diesel, 2004 A video can be sent via WhatsApp. Fjdpfozqyu Tox Albsgg We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without any guarantees (see our general terms and conditions). You can schedule a viewing and/or test drive without any obligation. Please call beforehand to arrange an appointment, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mileage: 123,195 km, power: 110 kW (149.56 HP), first registration: 08/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2027, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 126 MERCEDES-BENZ SPRINTER 315 MAXI HIGH + LONG. 1ST HAND: SERVICE BOOK MAINTAINED. Paint code: * 7224 Paint color Graphite Gray MB 7224 Interior: * Fabric, black Equipment: * 219L Hamburg * 7224 Paint color Graphite Gray MB 7224 * 804 AEJ X3/1 * A50 Front axle with increased load capacity * AR3 Axle ratio I = 4.182 * BH2 Control code, hydraulic system variant 1 * BK2 Control code, disc brake configuration 2 * C6L Multifunction steering wheel * C907 - * CB7 Stabilization level I * CL1 Steering wheel adjustable in inclination and height * CW2 Omission of vehicle lowering * D03 High roof * D50 Full-height partition * E07 Hill-start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * E43 Trailer socket, 13-pole * ED4 Fleece battery 12 V 92 Ah * ES0 Jump-start terminal * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F3F Passenger-optimized gear selector console * F68 Exterior mirrors, heated and electrically adjustable * F907 - * FF4 Storage compartment above roof liner * FF5 Storage compartment above windshield * FJ4 Storage compartment under cockpit * FKA Box van * FR8 Rearview camera * GD8 6-speed manual transmission, ECO Gear * H20 Heat-insulating glass all around * HH9 Semi-automatic climate control system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * ID0 Filler anthracite * IE0 Model series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IR6 Wheelbase 4325 mm, overhang 1615 mm * IT4 3.5-ton vehicle * J10 Speedometer, km/h * J55 Seatbelt warning system for passenger seat * J58 Seatbelt warning system for driver seat * J65 Outside temperature display * JA8 Crosswind assist * JG0 Gear shift indicator * JH3 Communication module (LTE) for digital services * JI7 Start-up distance, maintenance interval 60,000 km * K13 Main tank 71 liters * KP7 Exhaust gas purification SCR Generation 4 * L Left-hand drive * L94 Omission of parking lights * LA2 Headlamp assist * LB1 Side marker lamps * LB5 3rd brake light * LE1 Adaptive brake light * LX5 Europe * M60 Generator 14 V/250 A Fsdpfszz Eq Ujx Albsgg * M72 Vehicle HVO-compatible * MJ8 ECO start/stop function * MS1 Cruise control * MT6 Emission class Euro 6D N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * Q11 Longitudinal member reinforcement * QA8 Tow hitch for increased trailer load 2.8/3.0 t * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel rims 6.5 J x 16 * RZ2 Wheels manufacturer Magnetto Wheels * S02 Driver seat * S22 Armrest for driver seat, ISO-fix (child seat attachment system) * S23 Passenger seat, double seat * SA5 Airbag, driver * SK2 Seat occupancy recognition, driver seat * T16 Sliding door, right * T77 Grab handle, entrance, sliding door of cargo area, on partition * T86 Grab handle on rear corner pillar, right * V43 Wooden floor * V94 Cable duct on side wall * V95 Cable duct on rear portal * VF7 Fabric Maturin black * WB9 Control code, factory * WD8 Control code, factory * WM3 Control code, factory * WM4 Control code, factory * WZ7 Control code, factory * X30 Vehicle registration certificate, part 2 * X99

Condition: good (used), Year of construction: 2015, operating hours: 6,105 h, load capacity: 2,000 kg, fuel type: diesel, mast type: duplex, construction height: 2,150 mm, Linde H20D-01 Duplo 315 Sideshift, 6105 hours, VW Diesel, 2015, inspection valid until 7-2027. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call beforehand, as we are not always available. Fgodpfezr Ei Esx Albeg Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 1995, offer consists of: Theisen & Bonitz booklet maker tb sprint 315 VP - collating unit type 315 VP (15 stations) 1.? ?Demonstration video showing all 15 compartments. 2.? ??DIN-A6 size supported. (Shown here, for example, in compartment 1) 3.? ??Missing-sheet detection works. 4.? ??Double-sheet detection works. 5. Speed adjustment works. So it’s fully functional!! - Automatic arrival and departure of the stations - Individual suction and blowing nozzles, individually adjustable - Controlled blowing and separation air - Missing sheet control at every station - Missing sheet repetition - Electromechanical double sheet control on the delivery - Totalizer and area code counter - Shed sliding table for cross transport - Paper jam control via transport table - Transport table lighting Fjdpfozh D Irjx Albsgg - Digital speed display - Electrical connection - Vacuum connection for 303/304 QSM and 345 N - Display shaker for normal and folded displays - Pressure-vacuum pumps in a soundproof housing We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), Year of construction: 2017, operating hours: 4,470 h, Linde H25D-02, duplo315 sideshift, 2017 / 4470 hours, VERY WELL MAINTAINED / DIESEL A video can be sent via WhatsApp. Fgsdpfjzyawmsx Albsg We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 1967, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 315 t, air pressure: 6 bar, distance between side stands: 1,300 mm, stroke length: 180 mm, table length: 1,280 mm, table width: 800 mm, Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1250 x 800 mm Distance between columns 1300 mm Sizes L x B x H: 3600 x 1750 x 4600 mm Electric output 25 kW Total weight 17 000 kg Fodpfszh Ilbex Albogg

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Fjdpfx Asqabiaelbjgg Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: used, Parallel Lathe SCULFORT MAXICAP type 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Fjdpfx Ajzwgp Dolbsgg Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Condition: good (used), functionality: fully functional, Equipment & Features: • Universal milling head • Mechanical feeds • Digital position display Mitutoyo KA-200 (3 axes) • Solid cast iron construction • Classic, user-friendly controls • Electrical system and control by Schiffselektronik Rostock Fgjdpfx Aloymdwljbog • Original Heckert nameplates available Technical Data (according to nameplate, excerpt): • Mains voltage: 380 V • Frequency: 50 Hz • Rated power: approx. 2.2 kW • Feeds adjustable • Machine weight: approx. 3.2 t

Condition: like new (used), Year of construction: 1989, Sheet stamping press ERFURT PE2-H-315 ES Manufacturer: ERFURT Made in: Germany Specification: Max slide-block force over distance to bottom dead center 12.5 mm: 3150 kN Slide-block force over distance to bottom dead center 160 mm: 1100 kN Idle stroke amount: 25 mm Slide-block stroke: 500 mm Min closed die height: 680 mm Max closed die height: 1000 mm Moving table dimensions: 2800x1500 mm Die cushion: -Max stroke: 160 mm -Adjustable stroke: 160 mm -Max double-acting force: 630 kN -Max ejector force: 630 kN Fgodsyir Ukspfx Albog Main motor power: 45 kW Height above floor level: 7100 mm Press weight: 71.3 tons

Condition: used, mileage: 1,208,995 km, power: 280 kW (380.69 HP), first registration: 12/1995, fuel type: diesel, number of seats: 52, gearing type: mechanical, emission class: euro1, color: red, brakes: retarder, total length: 12,000 mm, total width: 2,500 mm, total height: 3,330 mm, Year of construction: 1995, Equipment: ABS, air conditioning, central locking, cruise control, fog lights, power assisted steering, traction control, = Additional options and accessories = - Armrests - Autoradio - Climate control - Double glazing - Electrically operated mirrors - Head rests - Heater - Hydraulic power steering - Individual air cooling - Refrigerator - Seat-belts - Sun visor - Tachograph - TV/Video Fjdpoy Hun Nofx Albegg = More information = Transmission: 8 gears, Manual gearbox Engine capacity: 14.618 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 20%

Year of construction: 1996, condition: ready for operation (used), Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible. Fgodpfoyyy Nrox Albjg

Condition: used, functionality: fully functional, power: 105 kW (142.76 HP), fuel type: diesel, axle configuration: 4x2, color: white, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,110 mm, loading space height: 2,320 mm, Equipment: ABS, air conditioning, central locking, MERCEDES SPRINTER 315 CDI 2.2 BOX VAN – YEAR 2016 – EURO 6B – INTERNAL LENGTH 4,200 mm – WIDTH 2,110 mm – INTERNAL HEIGHT 2,320 mm – PAYLOAD 1,000 KG – ENGINE 2,143 cc – 143 HP – EURO 6B – 105 kW – ABS – AIR CONDITIONING – CENTRAL LOCKING – CD RADIO – 3 CAB SEATS – ELECTRIC WINDOWS – CD RADIO – OVERHEAD SHELF – FOR INFO: FRANCESCO 3356514297 Fgsdpexr Ilpjfx Albsg

Condition: used, Used Hosokawa Alpine ZPS 315 for sale. Was used for powder coatings. Fgjdpowdvt Ujfx Albsg Includes filter, cyclone, rotary valves, control cabinet, air intake cooler, and much more.

Condition: good (used), Year of construction: 2015, operating hours: 19,143 h, load capacity: 2,000 kg, lifting height: 3,150 mm, fuel type: gas, mast type: duplex, construction height: 2,149 mm, Linde H20T-01 Duplo 315 Freelift / Sideshift / Fork Positioner LPG 2015 Video can be sent via Whatsapp. Continuous stock, please see website. Prices are ex Nuland. Van de Wert Trading B.V. has a rotating stock of machines, trucks, trailers, and attachments. Fgjdpfx Aoy Rkn Holbjg All our deliveries are at trade prices, in AS-IS condition, without any warranties. (see our general terms and conditions) You can schedule a viewing and/or test drive by appointment, free of obligation. Please call in advance as we are not always present at the location. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland