Used Forestry Equipment for sale (42,353)

Condition: new, Year of construction: 2026, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB Godpfxjvpqp Aj Ak Ueug • Low price because of no mediators. • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp.

Year of construction: 2026, condition: used, New: Yes Empty weight: 690 kg Dimensions of cargo space: 194 x 145 x 144 cm CE mark: yes Please contact Team DPX for more information Godpexuzucsfx Ak Uoug

Condition: good (used), machine/vehicle number: 3626, Year of construction: 1991, load capacity: 27,000 kg, total length: 12,150 mm, total width: 2,700 mm, operation weight: 5,300 kg, ELME 340 from Uniktruck Gsdozid Hkopfx Ak Ujug

Condition: good (used), machine/vehicle number: 3646, total length: 4,830 mm, total width: 1,510 mm, Year of construction: 1990, operation weight: 3,400 kg, load capacity: 36,000 kg, Seacom SEACOM SH36 from Uniktruck Gujdjzhpbkopfx Ak Uog

Condition: excellent (used), Hainbuch MS Dock Type: SW.ST.1038.0001.00 Advantages: Manual operation – no tensioning cylinder required Precise manual clamping possible Mandrels can be used on baseplates Very good condition Guodpfxezhrfle Ak Ueg

Condition: excellent (used), functionality: fully functional, power: 328 kW (445.96 HP), Year of construction: 2014, machine/vehicle number: 071254759, EXCELLENT CONDITION Gjdpfszi S Upjx Ak Usug

Condition: good (used), quantity 1 STK. Hahn & Kolb SUBITO SU Internal Precision Gauge Guedozb Rapepfx Ak Uog SU100-160mm 7 inserts 4 discs Without dial gauge In a wooden case. For the precise measurement of bores using the 2-point measuring method. By rotating and/or moving the gauge within the bore, geometric deviations can be detected. The movable measuring pin is fitted with carbide, as is the fixed measuring pin. Self-centring in the bore kzeuge GmbH.

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, heating capacity: 1.2 kW (1.63 HP), Packaging machine Minipack Minima Chamber shrink wrapping machine Minipack with base frame Capacity up to 250 cycles/hour Connection 230 V Gjdpfxey Ik A Ej Ak Uoug Used machine Visit our large showroom!

Condition: excellent (used), Year of construction: 2020, Minipack Torre Replay 55 Evo Shrink wrapping chamber machine 2020, up to 300 products per hour, programmable, max product dimensions 500mm x 380mm x 200mm, 1Ph Godpfozcg Edsx Ak Ujug

Condition: good (used), machine/vehicle number: 0112, Year of construction: 2012, Kubota V3300-EU3 from Uniktruck Guodpfx Asyug Uvjk Ujg

Condition: good (used), machine/vehicle number: 0119, Year of construction: 1997, Dana T32.000 from Uniktruck Guedpfoyuhamjx Ak Ujg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. This system was previously used to pack donuts and was in production for approximately 9 months in total. Godpfx Akjyrup Ao Ueug Manufacturer - Kempner.

Condition: good (used), -Testing device for electrical equipment Gedob A Ivzjpfx Ak Usug -each with isolation transformer -Number: 7 available -Price: per piece

Condition: used, Optical encoder Manufacturer: Heidenhain Type: OZA II 02 - 6 Device number: 2739 Godpfscifpmsx Ak Uoug Mounting distance: 14.30

Condition: good (used), Year of construction: 2003, functionality: fully functional, Brand: Kallfass Model: KW 5050 Universal Year: 2003 welding frame dimensions: 500 x 500 mm maximum film roll width: 650 mm Working height: 840 - 950 mm Passage height: 100 - 200 mm Power supply: 230 V three-phase current Rated power: 1.5 kVA Rated current at 230 V: 6.5 A Enclosure dimensions: 1550x1400x950 mm Gjdoha Unyspfx Ak Ueug

Year of construction: 2024, operating hours: 200 h, condition: new, functionality: fully functional, Dear Mr./Mrs., company Planit have opportunity to offer you new plasma nitriding equipment. Equipment is new, our production, cold wall equipment, used in 10 batches just to be tested. Characteristics of equipment: - Dimension of equipment: 1400x800x2000 Gedpfjvfdv Iex Ak Uoug - Chamber dimension: D500x600 - Maximum dimension of work piece: D400x500 - Equipment has own lifting device - Dimension of electrical cabinet: 860x600x2000 - Power supply of equipment: 3x400V,50 Hz - Nominal power of equipment: 18 KW - Nominal power of plasma: 15KW, maximum current 38A, voltage 0-800 VDC - Pulse mode: 0-20kHz,unipolar,changable pulse and pause - Automatic control of arc - 3 gasses supply with MASS FLOW CONTROLLERS (technology of post oxidation) In addition to equipment, we also offer its installation, giving all technology (nitriding,post oxidation), technical documentation. Also, we are making equipment according to customer request.

Condition: new, Quantity: 2 units Mirror and equipment column with external groove Item No.: 2045643 SICK Gsdpfxjzd N Tfs Ak Ujug Unused item from warehouse clearance

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,200 mm, total height: 2,400 mm, total width: 1,700 mm, overall weight: 1,500 kg, EASY-TO-TRANSPORT ELECTRIC OVEN – NO ASSEMBLY REQUIRED!!! This system comprises an industrial electric oven with internal dimensions of 1700 × 3200 × 2100 mm, engineered to deliver consistent and reliable thermal processing for demanding applications. The key feature of this oven is that it can be transported in its assembled state, eliminating the need for on-site assembly. The oven is powered by a high-efficiency electric heating unit (2200 × 2100 × 300 mm), equipped with 3 resistance blocks (a total of 9 heating elements), providing a total installed power of 27 kW. This configuration ensures uniform heat distribution and provides sufficient energy for stable and efficient operation under continuous workloads. To optimize internal air circulation and thermal performance, the system incorporates 2 Ø350 mm impellers, driven by 2 electric motors of 1.5 kW each (2 HP). This setup guarantees enhanced airflow dynamics, contributing to homogeneous temperature distribution throughout the chamber. The oven is fully insulated using 180 mm high-density thermal panels, significantly reducing heat loss while ensuring maximum energy efficiency and complete chamber sealing. This construction supports stable operating conditions and minimizes energy consumption. Additionally, the unit is equipped with an advanced control panel featuring all essential functions and operational parameters. The interface is designed with a strong focus on user-friendliness and operational flexibility, allowing the operator to easily adjust and control the system according to specific production requirements. Why this system excels: Godpfx Asyzw Ihek Ueug High power output (27 kW) Optimized airflow system (dual motor + impellers) Heavy-duty insulation (180 mm panels) User-friendly and fully functional control system Designed for reliability, efficiency, and industrial performance.

Condition: ready for operation (used), Diameter range: 50 mm - 135 mm Height range: 80 mm - 340 mm Heads: 10 Gusdpfeyv Addex Ak Ueg Production capacity: 2,500 - 6,500 cans per hour Label length: 40 mm - 130 mm Two labelling stations (front and back labelling) Includes several tooling sets for different bottle types

Condition: ready for operation (used), Diameter range: 45 mm – 114 mm Guodeyq Nv Iopfx Ak Ueg Height range: max. 238 mm Label height: 23 mm – 230 mm Label length: 117 mm – 380 mm Production capacity: up to 50,000 cans per hour

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Kallfass Universa 500 with shrinking tunnel by Hugo Beck Kallfass Universa 500, manufactured in 2011 The system is available immediately. The price of the complete system includes the Universa 400. The machine is technically refurbished and in very good condition. Technical data: - Length of transverse sealing bar: 500mm - Sealing bar opening: max. 200mm - Min. product length: 80mm - Automatic length adjustment to reduce the sealing gap - Film guide plate, available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing bar with replaceable sealing strip - Side sealing knives - Processable films: PE and PO - Year of manufacture: 2011 - Shrinking tunnel: Hugo Beck Transverse and side sealing are checked and refurbished. Infeed, outfeed, and transport belts are inspected and replaced if necessary. The machine will be available after inspection and repair. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow-pack machines for packaging products - regardless of their length - with complete wrapping and without film overlap. Gjdpozn Un Aefx Ak Ueug The product is fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. The product is detected by a light barrier. The feed belt can be easily adjusted for different product widths. After the product is wrapped in film, transverse sealing is performed using a continuously heated sealing system. Longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. The remaining film strip is collected on a film take-up reel. If required, we also offer installation and service for this or systems from other manufacturers. Subject to prior sale. The price is EXW. No guarantee for technical data.

Condition: used, Manufacturer: Ascojet Model: 2001RX Type: Dry ice blasting machine Gujdpfxjzf Uz Ds Ak Ujg Operating pressure: up to 10 bar Air consumption: approx. 3–6 m³/min Dry ice consumption: 20–80 kg/h Operating hours: 481

Condition: new, functionality: fully functional, power: 360 kW (489.46 HP), fuel type: hybrid, overall weight: 35,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! Guedpfx Ajwx Hvvek Ueg *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110 is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110 Production Capacity: 200-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Weight: 35000 kg - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Gedpjwhbnlsfx Ak Ueug

Year of construction: 2025, condition: used, New: Yes Empty weight: 35 kg Dimensions of cargo space: 54 x 29 x 58 cm CE mark: yes Serial number: 25050168 Please contact Team DPX for more information Godpfoxdhfgex Ak Usug