Collet equipment

Hainbuch MS Dock

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Dksdpom E T Anofx Aahsp Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: good (used), saw blade diameter: 400 mm, – Double mitering Dkedoim Ezgepfx Aahsp – Mist lubrication system – Protective cap – 400V

Condition: excellent (used), jaw width: 160 mm jaw height: 50 mm span width: 310 mm total height: 170 mm Dkodpfxed Hyfwe Aahsp

Year of construction: 1996, condition: good (used), Control UCC lite-2 Measuring range 700 x 450 x 350 mm Dedsd Stn Topfx Aahekp Measuring heads (MH20i, PH1, PH6) Various touch probes

Condition: new, functionality: fully functional, The V9 height gauge is designed for the most demanding users. Laboratories and workshops where measurement reliability is critical will appreciate its exceptional precision and 'Swiss Made' build quality. Metrological performance was at the core of the development of this height gauge. No compromises were made regarding precision and repeatability, which is why several design features—particularly the probe—differ from other models. The display, which is based on a fully tactile interface, offers a level of user-friendliness previously unseen in a vertical measuring instrument. The menus and displayed functions follow a rigorously consistent design philosophy, enabling high efficiency even in complex tasks such as programming, 2D mode, angle measurements, or statistical analysis of results. The V9 models are equipped with a revolutionary displacement handwheel, allowing the user to select between manual and motorized displacement mode. Measuring ranges: 400 to 1100 mm Exceptional precision Electronically adjustable measuring force Manual or motorized movement 2D, programming, statistics Comprehensive range of accessories All settings tool-free RS232 and USB interfaces Wireless data transmission (optional) Models V9: V9 – 400 Measuring range (mm): 406 Measuring range with extension (mm): 724 Accuracy (μm): 1.2 + L(mm)/1000 Repeatability (μm): 0.4 (Ø: 1) Frontal squareness deviation (μm): 5 Resolution (mm): 0.0001 Djdsw R Nv Ijpfx Aahekp Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air bearing: Yes Weight (kg): 21 Models V9: V9 – 700 Measuring range (mm): 710 Measuring range with extension (mm): 1028 Accuracy (μm): 1.2 + L(mm)/1000 Repeatability (μm): 0.4 (Ø: 1) Frontal squareness deviation (μm): 8 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air bearing: Yes Weight (kg): 24 Models V9: V9 – 1100 Measuring range (mm): 1109 Measuring range with extension (mm): 1427 Accuracy (μm): 1.2 + L(mm)/1000 Repeatability (μm): 0.4 (Ø: 1) Frontal squareness deviation (μm): 11 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air bearing: Yes Weight (kg): 33

Condition: new, Year of construction: 2026, The UK-350-P is a manual table saw with simple, safe operation! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK-350-P has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is clamped pneumatically. Fixed protection from the cutting area. Djdpsgcbuwofx Aahjkp

Condition: used, Year of construction: 1989, functionality: fully functional, grinding wheel diameter: 125 mm, overall weight: 520 kg, collet bore: 25 mm, grinding spindle speed: 500 rpm, power: 1.1 kW (1.50 HP), input current: 20 A, input frequency: 50 Hz, year of last overhaul: 2021, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm Dksdpfx Aaow U Ehzehjp workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! Notice: We would be happy to provide you with a free offer. However, please understand that we only accept inquiries with a complete address edit. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new 2-axis Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp waldmann * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate!* 6 months warranty !

Condition: new, saw blade diameter: 450 mm, – Saw blade 450 mm – Double mitre – 4 pneumatic clamps – Hydrocheck system – Automatic safety cover – Misting lubrication system – 1 roller conveyor 300 cm with length stop – Blow gun Dkedpfsrcb Tzex Aahop – Protective cap – Documentation – 400V

Condition: good (used), jaw width: 160 mm Dodpfx Ajd Hyfzoahekp jaw height: 50 mm span width: 310 mm total height: 132 mm

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Length:1200mm Width:800mm Dedpfxjy Uvhyj Aahjkp Height:1400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!