Used Forest Type for sale (37,372)

Condition: used, - Intended for original Fringand ovens - Possibility of adaptation for all types of ovens - Belt dimensions: 800x2700 mm Knodexwncfopfx Agrjd - Year of manufacture: 2001 - Serial number: 1174 The listing was translated automatically. Translation errors are possible.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. It can be connected and tested under power. Very good condition. X 11,500; Y 3,150; Z 2,000; clamping system M 100. Includes support column, 6 plates sized 6,500 x 1,850 x 400 mm. Knedpfx Asxwl Tbsgrod Rotary table E 20. Heads, etc. This is a complete workstation. Weight approx. 200,000 kg.

Condition: good (used), STILL Battery Change Rack Type 705319 (used) Kedpfxju Uhr Hj Agrsnd Price is per unit Larger quantities available

Condition: excellent (used), Year of construction: 2012, operating hours: 3,060 h, functionality: fully functional, Longitudinal travel: 2000 mm Cross travel: 520 mm Vertical travel: 540 mm Table: 2500x520 mm Table load: 2000 kg Spindle speed: 60-12000 rpm Operating hours: 3060 h Fixed table design Spindle taper: BBT40 ATC: 30 positions Power supply: 53 kVA Year of manufacture: 2012.09 Length: 4650 mm Width: 3235 mm Height: 2845 mm Weight: 13300 kg Ksdpfxjxwlu Eo Agrjnd Fixed table design 2-zone machining (2x650 mm)

Condition: used, functionality: fully functional, Item: DP-6833-LKP-L-LobePump Alfa Laval Rotary Lobe Pump Type: LKP-L6246 Stainless Steel, Acid-Resistant Pump Type: LKP-L6246 Motor: 7.5 kW 1455 RPM 2 identical units available Alfa Laval Lobe Pump Assembly – Technical Summary Drive Configuration Motor Brand: ABB Model: 3GAA132-114 Power: 7.5 kW Speed: 1455 rpm (50 Hz) Voltage: 400 V / 3-phase Protection Class: IP55 Insulation Class: F Power Factor (Cos φ): 0.82 Gearbox Manufacturer: Benzlers (Made in Sweden) Model: BC247-03 Gear Ratio: 4.21 : 1 Output Speed: 1455 / 4.21 ≈ 346 rpm Kjdpfxexuqano Agrjnd Oil Type: BP GR-XP 220 Mounting Arrangement: IM B3 (horizontal, foot-mounted) Pump Section Manufacturer: Alfa Laval (Made in England, Eastbourne plant) Type: Rotary Lobe Pump (LKP-L6246 designation on pump casing) Connection: 4” sanitary fitting (inlet/outlet) Material: Stainless steel (acid-resistant) Typical Displacement: 1.5–2.0 L/rev (for 4” lobe size) Performance Data (Estimates) - Pump speed (post-gearbox): ~346 rpm (from 4.21:1 ratio) - Theoretical capacity: 31–41 m³/h (based on 1.5–2.0 L/rev) - Working pressure range: up to approx. 5–6 bar (limited by 7.5 kW drive) - Motor mechanical output (efficiency ≈0.85): approx. 6.4 kW available for pumping - Shaft power/torque: approx. 177 Nm at 346 rpm Ready for delivery!

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Kodpfewfunyex Agrjnd Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare partsSale conditions and price: On request View all technical features

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min Kodpfoxukppex Agrond feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: used, functionality: fully functional, grinding width: 630 mm, grinding height: 150 mm, height adjustment type: electric, - Italian-made - Used sander, in very good condition TECHNICAL SPECIFICATIONS: - Maximum working width: 630mm - Maximum working height: 150mm 1 unit: + Knsdew Ip Ekopfx Agrsd - Grooved rubber calibrating roller + pad + 1 metal roller: + *from above: - Rubber feed-in slip roller: + - Processing unit: + - Rubber feed-out slip roller: + *from below: - Rubber slip roller: + - Feed belt: + - Pneumatic belt oscillation with photocells: + - 2 feed speeds: 0.28kW - Motor: 6kW - Electric brake: + - Electric table elevation: + - Working pressure: 6-8 bar - Extraction nozzle diameter: 150mm - Overall dimensions (L/W/H): 1070x1320x1900mm - Weight: 722kg

Condition: used, Technical details: Kedpfxjxt El As Agrond spindle diameter: 120 mm x-travel: 1250 mm y-travel: 1250 mm z-travel: 800 mm W-axis (spindle longitudinal): 600 mm Speed of boring spindles: 1- 2000 U/min. spindle taper ISO: 50 table surface area: 1000 x 1000 mm total power requirement: 55 kW weight of the machine ca.: 18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment *

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard PAINTING: * Colour in RAL 5011 & RAL 7036 Kedpjw Dp Ekofx Agrond * Epoxy paint is used to ensure long-lasting coating durability.

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. Kedpoxgtx Defx Agrend On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: good (used), Year of construction: 1997, Müller Martini Graphac Concept – Type MM 1 (24”) Year of manufacture: 1997 _____ TECHNICAL SPECIFICATIONS Description Specification Format range 16 – 28 1/8″ Cylinder circumference 24″ = 609.6 mm Printing width max. 515 mm (min. 200 mm) Paper width max. 520 mm (20 ½″) Roll diameter max. 1270 mm (50″) Core diameter pneumatic – for 70 mm cores Printing sleeves one 76 mm spindle for MM 1, 2 and 3 – not suitable for Alpha UV drying 6 UV lamps – 2 per printing unit (optional for Alpha) Side register yes – switchable Kjdpfxexv A Dhs Agrend Web direction Main drive 1/3 – straight Web tension control Work 1 + 2 / Work 2 + 3 / Work 3 + 4 Web tension 8 mm Printing units 1 station – central shaft Ø 70 mm Embossing station 1 station for embossing or die-cutting Matrix waste rewind 2 × rewind – double shaft Sheeter 1 sheeter with Ø 70 mm shafts Punching unit 2 double punching stations in fixed layout Die-cutting cylinder 1 magnetic cylinder with micrometric fine adjustment Cross perforation window perforation and suitable for 80 g paper Longitudinal perforation 2 cylinders with 4, 6, 8, 12 divisions – pitch 23.3 mm Punching stations 2 stations – pneumatic punch removal Slitting station 3 × upper, lower and edge trim knives Cross cutting external sheeter – cross knife Folding unit G17 – special fold – min. sheet 210 mm Cross cutting type 6 – 24 teeth rotary knife, fully adjustable Unwinder Motorised – roll Ø max 1270 mm / 70 mm core Rewinder Motorised – roll Ø max 1270 mm / 70 mm core Plate mounting 1 × 70 mm sleeve for Graphac Concept Printing pressure 0.14 mm adjustment Web thickness up to 0.22 mm printing thickness Printing speed up to 250 m/min _____ TOOLING & ACCESSORIES • Print sleeves and magnetic cylinders • Various punching, slitting and perforating tools • UV lamps and cooling system • Complete documentation and technical drawings The 6th printing unit is included – however, the infeed frame for the 6th unit is not available (it was previously removed and is no longer usable).

Condition: excellent (used), Year of construction: 1996, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table length: 12,000 mm, table width: 1,250 mm, year of last overhaul: 2025, workpiece weight (max.): 20,000 kg, New HeidenHain iTNC530 controller in 2015 New bearing in head September 2025 X/Y/Z Linear measuring system IKZ 15 Bar High pressure coolant Central lubrication Optional 2 x floorplates 6000 x 1250 x 245 mm #9240 T-28 with 5 T Slotts and 250 Jump X-Axis: 10000mm Y-Axis: 1500mm Z-Axis: 2500mm Table Length: 12000mm Table Width: 1250mm Table load: 20000Kg Power on spindle: 37kW Spindle speeds: 3500Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:Orthogonal 1 Degrees 2 sides° Length: 16000mm Width: 4200mm Height: 6800mm Weight: 60000kg Kedpsxdcbiofx Agrjnd Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs. Click on the link below to see a video of the machine running. Specifications: Capacity: 528 gal Material of construction: stainless steel Type Of Heads: welded dished top and welded dished bottom Internal Pressure: 29 PSI Ksdjxt Ehdjpfx Agrjnd Jacket Pressure: 58 PSI Internal Temperature: 273°F Type of stainless: stainless steel Legs/Lugs: Yes

Condition: used, Year of construction: 2010, Technical details: x-travel: 6500/13500 mm y-travel: 4000 mm z-travel: 1500 mm w-axis: 2250 mm table surface area: 5500/12500 x 3000 mm max. workpiece weight: 50.000/75.000 kg ram head dimension: 520 x 625 mm Kjdpfx Agsway I Usrend milling spindle motor: 67,4 ( s1/100% ) kW max. torque on the spindle: 2900 Nm tool taper: DIN 69893 HSK-A 100 milling head speed: 1 - 1000 / 5 - 5000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 29,5 x 9,5 x 8,2 m with CNC SIEMENS 840 D autom. tool magazine for 212 tool stations autom. milling head magazine for 6 milling heads 1 milling head -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2 milling head -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3 milling head -angular head extended- 40kW, 4000 rpm, 1800 Nm, HSK-A 100 4 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6 milling head -universal Index head - 40 kW, 4000 rpm, 2100 Nm, C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 coolant attachment, chip conveyor *

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS125, total width: 870 mm, total height: 950 mm, overall weight: 185 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 150 mm, workpiece length (max.): 150 mm, ZCVS 125 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 125 liter volume * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: Kedpfx Agoh Agr Horsnd *Colour in RAL 5011 & RAL 7036 *Epoxy paint is used to ensure long life of the paint

Condition: used, Technical details: spindle diameter: 150 mm x-travel: 10000 mm y-travel: 2500 mm bore spindle stroke: 700 mm ram stroke: 700 dimension of the ram: 340 x 340 mm spindle taper ISO: 50 Speed of boring spindles: 1,25 - 1250 U/min. feed speeds infinitely variable: 1 - 5000 mm/min rapid traverse: 5 m/min total power requirement: 120 kW weight of the machine ca.: 115 t dimensions of the machine ca.: 15,1 x 10 x 6,4 m with CNC SIEMENS 840 Dsl complete retrofit in 2010 Knjdpfx Ajwg R Swjgred FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity, longitudinal movement 2500 mm, angular milling head 4 x 90° universal milling head floor plate area ca. 12000 x 6000 mm ( 72 m²) chip conveyor and coolant attachment aerostatic guideways *

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. Kedpfx Ageh Nnbcsrjnd - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall.

Condition: used, Technical details: turning diameter: 626 mm turning length: 3000 mm Turning diameter: 600 mm spindle bore: 100 mm spindle turning speed range: 2800 U/min weight of the machine ca.: 18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head Knedpfx Agevgmimsrod - splash doors - tailstock - coolant device *

Condition: used, Year of construction: 2007, Technical details: turning diameter: 325 mm turning length: 600 mm total power requirement: 35 kW spindle drive: 25 kW spindle turning speed range: 5000 U/min speeds of tool: 4500 U/min rapid traverse X-axis: 60 m/min diverse toolholders: VDI 40 rapid traverse Z-axis: 45 m/min Ksdpjvgb Epjfx Agrend weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher *

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm milling spindle motor: 35/30 kW spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 Knsdpjv Rdzbofx Agred B-axis table round Horiz. and Vertikal automatic positioning Milling Head *

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm Knedpfx Aewc A Shjgrsd total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: used, Year of construction: 1999, Technical details: spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1600 mm z-axis: 1500 mm w-axis: 600 mm table surface area: 1200 x 1500 mm table load: 6 t spindle taper ISO: 50 spindle turning speed range: 5 - 2500 U/min spindle drive motor: 22 kW total power requirement: 60 kVA weight of the machine ca.: 28 t dimensions of the machine ca.: 7,0 x 5,4 x 4,4 m CNC HEIDENHAIN TNC 430 spindle support bearing automatic toolchanger 60-pockets chip conveyor and coolant attachment measuring probe * Kedpsvm Aauefx Agrend

Condition: used, Year of construction: 1998, Technical details: spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2530 mm z-axis: 2320 mm w-axis: 700 mm B-axis (table): 360.000 x 0,001 ° spindle motor: 50 kW spindle taper: ISO: 50 Knedpfxjvb Du As Agred spindle turning speed range: 1,6 - 1600 U/min Table dimensions: 1800 x 2000 mm max. workpiece weight: 8000 kg weight of the machine ca.: 37 t total power requirement: 50 kW dimensions of the machine ca.: 5,9 x 7,2 x 5,1 m Machine equiped with CNC HEIDENHAIN TNC 426 *

Condition: used, Technical details: spindle diameter: 130 mm x-travel: 2190 mm y-travel: 1520 mm z-axis: 1520 mm w-axis: 1000 mm table surface area: 2000 x 1800 mm workpiece weight: 8 t spindle motor: 18 kW spindle taper ISO: 50 spindle turning speed range: 4,5 - 900 U/min faceplate diameter: 785 mm Kedpfsvclrxsx Agrend rapid traverse: 5 m/min total power requirement: 40 kW dimensions of the machine ca.: 5,5 x 6,9 x 5,2 m weight of the machine ca.: 35 t Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster *