Used Foot Press for sale (14,545)

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Njdpfsyxp T Dox Ahvekw Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm Nsdeyxp Tdjpfx Ahvjkw daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. Nkodpfx Ajrfx Utehvew If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 1962, Hydraulic press 160 t Nedpjyxnb Hsfx Ahvskw

Condition: used, Hydraulic press by UVA Nkodpoyxnbgefx Ahvsw

Condition: used, Eccentric press by PELS Nkedeyxna Njpfx Ahvsw

Condition: used, Hydraulic press by UVA Njdpfoyxnavex Ahvekw

Condition: used, Double disc press 520 t Nkodpfeyxm U Sox Ahvow

Condition: good (used), Pneumatic press, pneumatic punch press, multi-function punch press, punch press, universal punch press, punching machine, hydraulic press, basic press, punching press -Manufacturer: Schüco, base press with base -Item No.: 280 226 with base 299 504 -Stroke: 20 mm -Pressing force: 32 kN -Operating pressure: 7 bar -Operation: via foot switch -Receiver: Groove 16/28 mm, see photo technical drawing -Dimensions: 400/400/H930 mm -Weight: 91 kg Nksdpfx Asx Tdmnshvsw

Condition: used, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Nksdpjyxmuljfx Ahvow Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Condition: like new (used), functionality: fully functional, Year of construction: 2014, controller manufacturer: Amada, controller model: Amada AB-Pad, stroke length: 200 mm, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Beam length (mm): 3110 Njdpfeynbfvsx Ahvskw Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Length (mm): 4580 Depth (mm): 2450 Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Condition: used, Year of construction: 1984, pressing area: 3000 mm x 1350 mm Nksdpfxeyxgauo Ahvow opening: 400 mm heating: electrically plate sourface: alu emergency stop switch: yes / ripcord pressure: 140 t number of cylinder: 8 electriticy: 34 A motor power: 22,4 kW machine length: 3550 mm machine width: 1550 mm

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Nodpfx Aevviytjhvokw

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Nkedpfx Aovvkmbohvew Storage location: Nattheim

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Nedpfjvvkl Djx Ahvokw Storage location: Nattheim

Condition: used, This Metallkraft workshop press, type: WPP 50 M, is being auctioned in our industrial auction / machinery auction – insolvency auction for metalworking: Elumatec, vehicles, trailers, tools, sea containers, workshop equipment, and office equipment, online. Nkedsyxd Upepfx Ahvsw

Condition: excellent (used), Year of construction: 2008, Trumpf TruBend 5085 Manufacturer: TRUMPF Model: TruBend 5085 Year of manufacture: 2008 Product number: F1025K Nedsyxdv Hjpfx Ahvskw Serial number: B0503A0302 Maximum press force: 85 tons Stroke: 540 mm Clearance: 445 mm Weight: 8,600 kg Bending length: 2,720 mm

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height 550 mm Max. wheel tread Ø 1100 mm Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width 5730 mm Height 3750 mm Weight 15900 kg Nkjdjkvnggopfx Ahvow Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: Allgaier, manual spindle press -Insertion height: 345 mm -Column clearance: 300 mm -Table width: 300 mm / Bore Ø 60 mm Nedeyxda Sspfx Ahvokw -Spindle mount: Ø 40 mm -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Condition: used, Year of construction: 2010, Pressure total: 2800 ton Ram stroke: 1120 mm Slide adjustment: 550 mm Shut height (stroke down, adjustment up): 1650 mm Free frontal opening L-R: 5100 mm Nkodpfjyw Uk Sjx Ahvjw Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 600 ton Die cushion stroke: 350 mm Number of strokes: 6 - 15 s.p.m. Height over floor approx.: 10800 mm Weight of machine approx.: 805 ton

Condition: used, Year of construction: 1985, Pressure total: 1500 ton Ram stroke: 1100 mm Nodpsyw Uk Eefx Ahvokw Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 4600 mm Table surface area : 4500 x 2500 mm Slide area: 4500 x 2500 mm Die cushion capacity in table: 250 ton Die cushion stroke: 250 mm Ejector in ram: 150 ton Ejector stroke in ram: 150 mm Number of strokes: 6 - 18 s.p.m. Required power: 200 kW Height over floor approx.: 9000 mm Weight of machine approx.: 400 ton

Condition: used, 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg QM46-2 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg QM46-2 Baujahr / Year 1999 - Serial-No. 959690 Bogenformat / Sheet size min. 140 mm × 89 mm - max. 340 x 460mm Druckgeschwindigekit / Printing Speed max. 10.000sh/h Dicke / Thickness 0.04 mm – 0.3 mm Dampening System DDS Autplate Plus Version Streifeneinleger - Strip feeder  Nkodpoyw Ugaefx Ahvsw Trockenbestäuber / Dry pollinators Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2016, Specifications Manufacturer: IMV Model: DM125 Year: 2016 Condition: Used Stock number: 0396 Ram force: 1,250 t Number of press points: 2 Drive: Eccentric with stroke adjustment Ram stroke: 250–400 mm Strokes/min: 5–35 Vertical daylight below bolster, CBRA: 1,150 mm Table dimensions: 4,500 x 2,000 mm Ram dimensions: 4,500 x 2,000 mm Side column window: 2,600 mm Max. front column window: 4,900 mm Transfer cart: 2 units present Nedoyw Uf Aepfx Ahvskw Main motor power: 290 kW Press weight: 310,000 kg

Condition: used, Year of construction: 2015, Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Nedoyw Twkopfx Ahvekw Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton Standard configuration Moving bolster extending forwardsCutting impact bumper dampingSIEMENS S7-300 controller

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used CNC 4-meter press brake from Ermaksan Model: CNC AP 40200 Capacity: 4100 x 200 tons 1 set of complete tooling Delem DA66w graphical CNC control CNC-controlled Y1, Y2, X, and R axes Manual crowning Nksdpsyw Swiefx Ahvjw