Used Folding Machine for sale (67,397)

Condition: used, Year of construction: 1995, sheet width 3000 mm plate thickness 4 mm work height max. 900 mm 450 mm total power requirement 5,5 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 4250 x 1500 x 1850 mm Ncodpjyk Diijfx Ahvjp Equipment: - electric bending angle adjustment - electric upper beam adjustment - foot switch - operating instructions

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 1000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized backstop, 1000 mm Njdpfxeyk Dics Ahvscp - Motorized upper crossbar adjustment - Motorized lower crossbar adjustment - Side protection - Foot switch - Operating instructions

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers Ncsdpfsxaa A Nex Ahvop * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahlfolder KD 66/ 4KTL - FD Year 2001 Ncedpjykz Sbjfx Ahvjp Description: - 16 page folder Feeder - Flat pile feeder - Pump Folding unit Heidelberg Stahlfolder KD 66.1/4 - Parallel fold unit with 4 buckle plates: 66cm - Perforating shaft - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left Delivery Heidelberg Stahlfolder - Stream delivery

Condition: used, Format: 310 x 432mm Equipment: roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg Nedpfsx N I Uhjx Ahvocp

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 010001, Roundpile feeder model RFU-74, cross folder AFC-744AKT, 32-page machine, standard book tooling parts. Nedpfeykrvwox Ahvecp

Condition: new, sheet width 915 mm plate thickness 1,0 mm distance between columns 920 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 96 Kg dimensions of the machine ca. 1170 x 400 x 480 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm. Nedpfx Aoupxf Iohvocp

Condition: good (used), Year of construction: 2006, functionality: fully functional, A cardboard box folding machine is for sale. Fully functional, fully automatic, adjustable to different sizes Cardboard boxes are not supplied Simens control Currently set box size: 240*230*200 mm On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Ncjdpfx Ahjtyai Rovep Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Year of construction: 2014, condition: new, functionality: fully functional, 2014 MODEL THEEGARTEN-PACTEC BRAND, U1-D-CW TYPE GUM CRUSHING, FOLDING PACKAGING MACHINE. With panel and other auxiliary units. There are 2 labels on the machine. It is configured for 30.6x12.1x3.9mm single size and the maximum output speed is 2000ad/min; The machine is brand new, not operated and disassembled. Nodpfxjunkw Ts Ahvecp

Condition: excellent (used), Schechtl HBM 310 The machine is equipped with: -a foot pedal -10 mm insert rail -a sheet metal support table (optionally also a back gauge) -Capacity: 1.0 mm steel sheet (1.50 mm aluminium, 1.25 mm copper, and 2.50 mm zinc) Ncodsymz Riopfx Ahvop -Working length: 3100 mm -Weight: approx. 1,480 kg

Year of construction: 2024, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: ZH-500, Folding and gluing machine for longitudinal folding and gluing of paper and folding carton. The minimum processable paper thickness is approximately 200 gsm. The machine is equipped with a glue wheel, which applies a glue line instead of glue dots. Minimum product size: 3 cm, maximum: 30 cm. Ncedpfsx Hfh Hex Ahvsp The machine is new, fully operational, and is supplied with all spare wear parts (such as the blue belts). Machine dimensions: 270x70 cm. Operates on 220V. All specifications can be found in the PDF attached to this advertisement.

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahl folder KD 78/4KLL Year: 2001 Description: - 32 page folder Feeder - Flat pile feeder - Pump Folding unit Ncsdpoyi Udusfx Ahvep Heidelberg Stahl folder KD 78/4KLL - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left - Third cross fold (left) - Excluding noise hoods Delivery Heidelberg - Stream delivery

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahl folder KD 78/4KLL Year: 2001 Description: - 32 page folder Feeder - Flat pile feeder - Pump Folding unit Heidelberg Stahl folder KD 78/4KLL - Glue unit - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left - Third cross fold (left) Ncedpfjyi Ub Tjx Ahvjp - Excluding noise hoods Delivery Heidelberg - Stream delivery

Condition: used, Folding machine Stahl Item no.: L834 Nedpsymlqgefx Ahvjcp Price - 300€ FCA Germany

Condition: new, neu Nsdpfxswirc Ae Ahvocp ca. 2 - 4 Wochen ab Auftr Türkei 5900 € 113.87 € 1250 mm 1.25 mm 0.8 mm 2 mm 150 ° 500 mm 200 mm 1500 mm 750 mm 1715 mm 315 kg geteilt, 45° Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English

Condition: excellent (used), Technical data: Ncsdpfx Asv Ef Apohvjp Working length: 4050 mm Bending capacity: 2.0 mm Sheet metal cutting device Max. opening of bending beam: 300 mm Motor power: 4.5 kW Dimensions (length x width x height): approx. 5200 x 1500 x 1650 mm Weight: approx. 3.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Thalmann THAKO 30 Working width: 8.20 m Bending capacity: 3.0 mm Ncodpeyl Tvuefx Ahvop Year of manufacture: 2010 Touchscreen NEW

Condition: used, machine/vehicle number: 423. 1245102, 4-strand flyer with reversing beam Wire diameter: 0.05 to 1.0 mm 2-strand flyer with reversing beam Winding diameter: 90 mm, traverse width: 120 mm Max. wire diameter: 1.0 mm Njdpfx Ahjylzlkjvocp

Condition: used, 6-fold flyer winding machine Njdpsylnkgsfx Ahvscp

Condition: good (used), functionality: fully functional, Manual folder/box and pan brake, capacity 2000 x 2 mm Nedpfx Aeyhh T Hjhvjcp

Condition: not inspected (used), Year of construction: 1992, CNC folding machine make: EHT, type: EHPS 11 - 45, SN: 206882, year: 1992, pressure capacity: 1,100 kN, working range: 4,450 mm, CNC control Cybelec, 2-hand operation, safety device make: Trumpf, retrofitted in 2023, last maintenance in 2023 by Trumpf for approx. €10,000.00, Ncedpfx Ajv Duu Eshvsp Note: Machine already professionally dismantled and ready for transport

Condition: good (used), functionality: fully functional, Year of construction: 1990, This high-performance swing bending machine RAS 67.30 with single-program control comes from first ownership. Bending capacity: 3200 x 2.5 mm Drive power: 3 kW Machine weight: 3800 kg Includes pre-selection of bending angle via rotary potentiometer, second footswitch for two-person operation, continuous 45° upper bending bar, segmented/split and raised upper bending bar H = 100 mm Ncsdpfxoxmi Hdj Ahvsp Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), MBO T500F Folding Machine Ncodpfxeyg D T Te Ahvep Machine in very good condition, ready to work. Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 720 mm High stack feeding 4 cassettes with micro-adjustment and cutting Casket and compressor noise reduction Electronic counter with batching Electric delivery Machine in very good condition, ready to work.

Condition: used, functionality: fully functional, Year of construction: 1975, Mechanical Swing Bending Machine Make: FASTI Model: 208 2040x3mm Ncjdox An Tuspfx Ahvep Year: 1975 Technical Data Manufacturer: Fasti Model: 208-20-3 Year of Manufacture: 1975 Working length: 2040 mm Sheet thickness: 3 mm Upper beam stroke: 200 mm Stroke speed: approx. 7 mm/s Dimensions: Weight: Equipment • Swiveling upper beam • Motorized upper beam • Maximum upper beam opening: 200 mm • Lower beam adjustable beneath pivot point, 100 mm • Bending beam adjustable beneath pivot point, 100 mm • Bending beam swivels up to 180° • Backgauge adjustable from 0 to 600 mm • Various bending rails as shown in photo All information provided without guarantee. A powered demonstration is available at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 705537, infeed width: 660 mm, Maximum sheet size 660 x 1280 mm, Pallet feeder, 4 buckles first unit, First cross knife (8 pages) Second cross knife ( 16 pages) parallel buckle to the first cross knife. SB-46/MP.D Press delivery. Noise hoods, Pump, Technical documentation, Standard tools. Intergrated counter Ncodpfxoqgcy Is Ahvjp