Used Folding Low Pressure Press for sale (32,527)

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 2800 rpm -Volume output: 35 m³/min -Pressure increase: 95 mm water column -Connection input: 200 mm -Connection output: 105 x 120 mm -Number: 1x fan available -Price: per piece -Dimensions: 340/390/H470 mm Iijdocwqdkepfx Aa Esd -Weight: 18 kg

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, heating fan, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 820 rpm -Volume output: m³/min Iiedjdc D Easpfx Aa Eed -Pressure increase mmWS -Connection input: Ø 250 mm -Connection output: 355 x 355 mm -Number: 1x fan available -Price: per piece -Dimensions: 440/490/H575 mm -Weight: 34 kg

Condition: used, functionality: fully functional, Offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD-60, 7,856 operating hours, 2 intensifiers, both operating simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Iiedpfxszivhts Aa Eed Pump 2 Flow 7XD-60, 25,179 operating hours, 2 intensifiers, both operating simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48,000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55,000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pumps are from a single original owner and are in good condition. The pumps have been completely overhauled by us and will be ready for operation in approximately 3 weeks. Prices available upon request.

Condition: excellent (used), Hertz energy-saving boiler 50 kw Iiedoq I Nfhopfx Aa Eed

Year of construction: 1998, condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, exhaust fan -Manufacturer: Nedermann, radial fan pressure blower -Type: 520929 Ø 420 mm -Motor power: 1.5 kW / 2800 rpm Iedpfxjzd S Eqj Aa Eeid -Volume flow rate: m³/min -Inlet connection: Ø 155 mm -Outlet connection: Ø 155 mm -Fan wheel: Ø 420 x 30 mm -Dimensions: 630/4300/H680 mm -Weight: 24 kg

Condition: excellent (used), Radial fan, conveying blower, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, press conveyor, pneumatic conveyor with injector, grain conveyor -Pressure blower: Pneumatic conveyor with filling hopper -Type: Ø 520 mm -Engine power: 4.0 kW / 2920 rpm -Volume flow rate: m³/min -Inlet: Ø 215 mm -Fan wheel: Ø 520 x 45 mm -Fusing funnel: Ø 415 mm -Dimensions: 1790/650/H880 mm -Weight: 119 kg Isdpfxezdzq Ne Aa Eeid

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Isdpfjzdq R Eox Aa Eeid -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 600 x 40 mm -Dimensions: 675/1120/H880 mm -Weight: 83 kg

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 740 mm -Engine power: 7.5 kW / 2925 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm Iijdpfx Aaozdq Rlo Esd -Fan wheel: Ø 740 x 40 mm -Dimensions: 600/1050/H1000 mm -Weight: 152 kg

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Iedpfjguqucox Aa Esid Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: used, With this offer, you are purchasing a used flow cytometer ‘Beckman Coulter DxFLEX System B5-R0-V0’. Iodpfx Aoxl Tv Hoa Esid Item for sale: 1 x Beckman Coulter DxFLEX System B5-R0-V0 with the following equipment: Manufacturer tested Includes laptop for use Condition: This offer is for a used device, which may show signs of wear. The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Iedpstrdyrefx Aa Ejid Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Iodpfxsfz Dvve Aa Eoid The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Iedefz Ax Sjpfx Aa Eeid • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Iisdpfx Aaoflpmqe Ejd The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Iiedpfxjfzrapj Aa Esd The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Isdsfz A D Nepfx Aa Eoid High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, The filter body is original PENTAS, Czech/EU production. The automation system has been newly built and has never been used. Main data: - Manufacturer: PENTAS Horice a.s. (CZ-EU) - Model / type: AO-9N - Type: vertical pressure leaf filter - Filtration area: approx. 10 m² - Filter body: stainless steel - Vessel volume: 830 l - Max. working pressure: 0.5 MPa - Max. working temperature: 40 °C - Weight: approx. 760 kg - Year of filter vessel: 1999 - Automation: new and unused Iiedstxc Hpepfx Aa Esd - Control: PLC control cabinet - Valves: pneumatic valves - Includes piping, fittings, sensors and automation system - Location: Slovakia, EU Suitable for filtration of vegetable oil, rapeseed oil, sunflower oil, soybean oil, technical oils, biodiesel and oleochemical applications. The filter vessel is used, but the automation system is completely new and unused. The unit is designed for automatic operation with pneumatic valves, sensors and PLC control. Fully functional according to seller information. Sold as shown in the photos. Loading possible. Worldwide shipping on request. 7. Nemački dodatak Zu verkaufen: PENTAS AO-9N Edelstahl-Druckblattfilter mit ca. 10 m² Filterfläche. Der Filterbehälter ist original PENTAS, tschechische/EU-Produktion. Die Automatisierung wurde neu aufgebaut und ist unbenutzt. Technische Daten: - Hersteller: PENTAS Horice a.s. (CZ-EU) - Modell / Typ: AO-9N - Vertikaler Druckblattfilter - Filterfläche: ca. 10 m² - Edelstahl-Filtergehäuse - Behältervolumen: 830 l - Max. Betriebsdruck: 0,5 MPa - Max. Betriebstemperatur: 40 °C - Gewicht: ca. 760 kg - Baujahr Filterbehälter: 1999 - Neue, unbenutzte Automatisierung - PLC-Schaltschrank - Pneumatische Ventile - Rohrleitungen, Armaturen, Sensoren und Steuerung inklusive - Standort: Slowakei, EU Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen. Der Filterbehälter ist gebraucht, die Automatisierung ist neu und unbenutzt. Voll funktionsfähig laut Verkäuferangabe. Verkauf wie auf den Fotos. Verladung möglich. Versand auf Anfrage.

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Iiedpfozfqgiox Aa Eod Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: used, mileage: 305,000 km, power: 300 kW (407.89 HP), first registration: 09/2008, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 10,050 mm, total width: 2,500 mm, Year of construction: 2008, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, = Additional Options and Accessories = - 6x2 - Digital tachograph - Lift axle - Air suspension - Power take-off (PTO) - Radio/CD player - Sun visor = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,946 cc Axle Configuration Front axle: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R 22.5; Steerable; Tire tread depth left: 75%; Tire tread depth right: 75%; Suspension: Air suspension Iijdszhlngepfx Aa Ejd Weights Unladen weight: 18,629 kg Payload: 9,371 kg GVWR: 28,000 kg Functional High-pressure pump: Yes Water tank: Yes Hoses: Yes Condition Damage: None

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Iiedex Sdptjpfx Aa Eod Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS Iijdpfx Aajw Icn Se Eod PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications.

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 56 kg, warranty duration: 24 months, input frequency: 400 Hz, SPECIFICATION: Model: KPC-5.5TP Voltage/Hz: 400/50 Pressure (Bar): 200 Flow Rate (L/h): 900 Power (W): 7200 Motor: Induction RPM: 1450 Iiedpfsw Ickaox Aa Esd PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, DIAMETER 18 mm STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS EQUIPPED WITH PROFESSIONAL ACCESSORIES, INCLUDING 4 NOZZLES OF DIFFERENT SPRAY ANGLES TO HANDLE ANY TYPE OF DIRT AND SURFACE FEATURES A PRACTICAL HOLDER FOR ACCESSORY STORAGE AND A PROFESSIONAL BRAIDED HOSE Advantages of a crankshaft pump with ceramic pistons: - Precise operation and very high efficiency – these pumps are indispensable in environments where reliability over many hours of daily operation is crucial. - Minimal component wear – ceramic pistons are far more durable than steel ones, so they require less frequent servicing. - Resistance to chemicals and variable temperatures – they perform excellently even when working with aggressive chemicals and hot water. - Smoother operation – the pump runs more quietly and generates less vibration, improving operator comfort. Low-speed Motor – Professional design: - 1450 RPM ensures lower component wear and reduced noise emissions. - Designed for heavy-duty operations, ideal for tasks requiring continuous and extended use.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 120 bar, high-pressure hose length: 10,000 mm, pressure: 150 bar, empty load weight: 40 kg, warranty duration: 24 months, input frequency: 230 Hz, SPECIFICATION: Model: KPC-3.5P Code: K8.011.0051 Voltage/Hz: 230/50 Pressure (Bar): 120/150 max Iodpfew Icciox Aa Eoid Flow Rate (L/h): 660 Power (W): 3000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH INTEGRATED BYPASS VALVE 18 mm CERAMIC PISTONS STAINLESS STEEL INLET AND OUTLET VALVES INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS STOP&GO FUNCTION EQUIPPED WITH PROFESSIONAL ACCESSORIES FEATURING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR REMOVING ALL TYPES OF CONTAMINANTS AND SURFACES INCLUDES A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL BRAIDED HOSE Why choose a crankshaft pump with ceramic pistons? - The crankshaft pump is a solution renowned in industrial applications. Its robust design ensures a significantly longer service life compared to more affordable washers equipped with axial or rotary pumps. - Ceramic pistons offer exceptional resistance to high temperatures and wear, providing reliable and quiet operation for years. - Thanks to this construction, the unit can be used in continuous operation mode without the risk of overheating or excessive component wear.

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 250 bar, total length: 607 mm, high-pressure hose length: 10,000 mm, total height: 1,063 mm, total width: 518 mm, type of input current: three-phase, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, Technical Specification Voltage: 3 / 376–424 V / 50 Hz Working Pressure: 80–250 bar Flow Rate: 500–1000 l/h Inlet Water Temperature: 60°C Connected Load: 8.8 kW Nozzle Size: 047 Colour: Anthracite Weight with Accessories: 70.3 kg Weight with Packaging: 78.55 kg Dimensions (L x W x H): 607 x 518 x 1063 mm The compact, vertical design is made possible by the vertically mounted motor and pump. Compact dimensions facilitate storage. Manoeuvrable and easy to transport. Stable during operation. 4-pole, low-speed motor cooled by water and air; reliable stainless steel piston pump and brass cylinder head Isdpfx Aajw Idutj Esid Long service life and economical maintenance. High performance and efficiency. Water suction function for water temperatures up to 60°C. Ergonomic Vibrasoft rotary nozzle Reduces vibrations by up to 30%. Reduces noise level and intensity. Rotary nozzle provides support for demanding cleaning tasks. Smart service design speeds up on-site maintenance Rotatable pump head. Convenient oil level indicator and integrated oil drain in the device housing. Modular design comprising pump, motor, and control cabinet. Support systems and LED display Integrated electronic control system. Automatic shut-off in case of network overload. Automatic shut-off in case of phase loss or leakage from the device. Comprehensive range of accessories with EASY!Lock technology Pressure and water volume can be adjusted via the Servo Control regulator located between the lance and the trigger gun. The EASY!Force Advanced trigger gun allows effortless operation. Rotary lance made of stainless steel, 1050 mm in length. Wide range of additional accessories Storage compartment. Adjustable hooks, e.g. for storing a second lance or power cable. High-pressure hose storage compartment.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 Isdpfsy D Hy Esx Aa Eoid • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.