Used Foam for sale (404)

Condition: used, functionality: fully functional, machine/vehicle number: WKESD000000515294, maximum load weight: 24,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2012, loading space width: 2,480 mm, loading space height: 2,715 mm, total width: 2,600 mm, total height: 4,010 mm, suspension: air, tire size: 385/65 R22,5", color: silver, Please note: The images shown are archive images. The vehicle may be in use! - Registration/Operation: Maximum permissible saddle load: 12,000 kg - Registration/Operation: Maximum permissible axle load: 24,000 kg - Registration/Operation: Maximum permissible total weight: 36,000 kg - Technically permissible maximum saddle load: 12,000 kg - Technically permissible maximum axle load: 27,000 kg - Technically permissible maximum total weight: 39,000 kg Chassis - Double-T longitudinal and center beams as well as outer frame with cross members and outriggers, welded together - Front frame height: 100 mm (incl. floor and saddle plate) Outrigger system - Two mechanical support winches, 2 x 12 tons, semi-circular with base plate, F Axles/Unit - 3 axles - Electronically controlled air suspension, ECAS (Wabco) - ECAS can only be operated with an external voltage source - Control of the air suspension system via SmartBoard Fgjdpszblv Ssfx Ah Eei - 6-ply, 385/65 R22.5" - Rims center-mounted - Brake - Spring-loaded parking brake - 2 chock blocks - Manufacturer of braking system: Wabco - WABCO SmartBoard Displays the following information: - Trailer operating data - EBS error messages - Kilometer information - Axle loads - ECAS control via SmartBoard - Lift axle control via SmartBoard Lights - Lighting and signaling system according to EC directives 76/756/EEC and subsequent directives or UN ECE Regulation No. 48 - 2 outline lights with rubber arm, LED version - Side marker lights in LED version - Electrical connections approx. 350 mm above the beam height - 24 Volt, front with 7-pin socket DIN ISO 1185 - 7-pin socket DIN ISO 3731 at the front, for additional functions - Additionally, a 15-pin socket DIN ISO 12098 at the front Floor - Type: BO 13620 B - 30 mm thick, water-resistant laminated floor, cut edges sealed all around, strength according to DIN 283, for floor loads up to 7,000 kg forklift axle load Box body - Body type: AB 13620 STLI - Exterior width: 2,600 mm. 2480 mm between the keyhole plates - Interior width: 2480 mm approx. 2,470 mm between the rub rails - Interior height: 2,715 mm - Loading height in the rear portal: 2650 mm - Unladen vehicle overall height at the highest point approx. 4,010 mm (with the aforementioned unladen saddle height) - Side walls in sandwich construction with steel outer layer, panel thickness: 30 mm, painted on the outside, PVC-coated on the inside, side wall connection on the outside via aluminum profiles, on the inside with steel rub rail 4 x 500 mm, protruding slightly as keyhole plate protection (4 mm offset). Lashing points: 13 pairs embedded in the rub rail. Note: Additional holes for warm air ducting of the cargo space heater. (A cargo space heater (underfloor) incl. a diesel tank can be installed later. (Not included in Kone's scope of delivery!) - Steel guide rails embedded on both sides for accommodating double-deck load beams (33 pallets in longitudinal direction) - 22 + 1 LM load beams for double-deck loading, load-bearing capacity per load beam approx. 10 kN. Interior, keyhole plates fully flush on the surface between the double-deck guide rails. In the area 1,400 - 1,900 mm from the floor surface, there must be no keyhole plates; a smooth surface must be maintained. - Front wall in insulated design, panel thickness: 30 mm (sandwich panels with foamed PU core and steel outer layer) Reinforcement of the front wall on the inside at the bottom like the rub rail (4 x 500 mm), above that a 21 mm thi

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: Fedpoirmgfefx Ah Eegi The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: reconditioned (used), power: 11 kW (14.96 HP), operation weight: 8,000 kg, Horizontal baler DIXI 80 SLD Fgodsqa Dq Depfx Ah Eoi 2018-2021 Year of construction Semi-automatic 80-tonne baling system for the economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard packaging Tetra packaging Films PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4,320 x 1830 x 2,154 mm Filling opening W x H (standard) mm: 1,040 x 1,110 mm Machine weight approx. kg: 8,000 Press force max. kN: 80 t / 800 kN Ironing cycle (average value) approx. s: 35 Bale size W x H x L approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Binding: manual Number of bindings: 4, with wire with Quicklink wire Drive power: 11 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation. The operating instructions are available and are supplied as a PDF file and in paper form.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3.2 kW (4.35 HP), number of axes: 3, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, Universal CNC router for cutting, engraving, and 3D milling of any shape or form you need. Easy-to-use Wattsan CNC milling machine for medium or large production which will serve you accurately. It works with metal, wood, plastic, foam rubber, aluminum, and plexiglass. Fjdpforyv Dbex Ah Esgi Wattsan A1 1325 has a T-slot table that allows you to secure items using bolts, clamps, or a mechanical holdback. This router is equipped with two-phase stepper motors, allowing for better movement along the X, Y, and Z axes. With a Wattsan milling machine, you may make doors, tables, seats, machine components, and other items. You can give our managers a call for additional details! Wattsan A1 1325 characteristics Working area: 1300x2500 mm Spindle: 3 kW Machine size: 1960 x 3100 x 1662 mm Weight: 630 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: M166011 01 G21C, The LineLazer V 250SPS model with paint guns is a self-propelled solvent painting machine with reflective beads designed for large and heavy striping jobs, including painting parking lots and roadways. Pressurised bead system:  Excellent bead application performance  Ensures proper flow of beads Automatic paint gun system  Quality solenoid driven system Remote control control box  Easy to use and highly visible in all conditions 25 gallon paint tank  Less refills  Extended stripping time with high capacity hopper Honda® GX engine Fgjdjt Dlmbjpfx Ah Eoi  Reliable and easy to start  Oil alarm stops engine to prevent damage if oil level drops too low Electric start  Quick start EasyMark gun adjustment system  Easy gun adjustments  Easy gun adjustment every time  2 gun capability with QuikSelect gun selector Use of front or rear holster Self-centering front wheel  Simple operation  Foam-filled, three-wheel design for stability Additional features  Easy steering adjustment  Durable Chromex pump  High efficiency hydraulic motor  High capacity cooling system  Easy Out pump filter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 852 h, machine/vehicle number: 0300230251, load capacity: 227 kg, platform length: 1,520 mm, platform width: 760 mm, overall weight: 6,532 kg, pivoting range: 360 °, TECHNICAL DETAILS Platform height: 13.72 m Horizontal outreach: 7.24 m Up-and-over clearance: 7.70 m Slewing range: 360° continuous rotation Platform capacity: 227 kg Platform rotation: 180° Vertical jib articulation range: 144° (+86° / -55°) MACHINE DETAILS Machine weight: 6,532 kg Max. ground pressure: 7.6 kg/cm² Driving speed: max. 7.2 km/h Gradeability: 30% Fgsdsyzq Uuspfx Ah Eoi Turning radius (inside, 2WS/4WS): 0.61 m Turning radius (outside, 2WS/4WS): 3.15 m Electrical system: 48 V DC Batteries: 8 × 6 V, 375 Ah AC power outlet on platform: 110 V Additional power supply: 12 V Standard tires: 24 × 9 × 12.5 Optional tires: 26 × 7 × 20, non-marking Hydraulic tank capacity: 15.14 l Platform width: 76 cm Platform length: 1.52 m Machine width: 1.75 m Machine height: 2.01 m Machine length: 6.45 m Wheelbase: 2.01 m Ground clearance: 20 cm EQUIPMENT Dual electric traction motors Foam-filled, non-marking tires Electric turntable All-wheel drive Automatic traction control Battery charge indicator Brushless AC motors ClearSky Smart Fleet Horn Hour meter LED lighting with amber beacon Lifting and tie-down lugs Load sensing system Platform leveling system Platform status indicator light SkyGuard SkyLine Tilt alarm and warning light

Condition: used, Year of construction: 2011, Scissor lift – JLG 260 MRT-A Manufacturer: JLG Model: 260 MRT-A Year of manufacture: 2008 Technical data Working height: 9.92 m Platform height: 7.92 m Platform length: 2.59 m Platform width: 1.65 m Total weight: 3,390 kg Length: 2.67 m Width: 1.75 m Overhead clearance: 2.36 m Basket load capacity: 570 kg Outriggers: none Drive: Diesel Special equipment Platform extension: 1.22 m Off-road tires, foam-filled All-wheel drive Fodpjzd Hzgofx Ah Ejgi Driver's license class 3/B Dates/status TÜV (technical inspection): not applicable UVV (accident prevention regulations): valid until: 07/2026 Mileage: not applicable Operating hours: 2,448 hours as of 02/2026 Indicated price plus statutory VAT. Are you interested? We are always happy to assist you! You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m. Subject to changes and errors!

Condition: reconditioned (used), functionality: fully functional, Sandt 530 CE Bridge Cutting Machine Hydraulic press with a traveling beam (front/rear movement) designed for cutting various materials using a die (leather, foam, cork, etc.). Fedeyryzdepfx Ah Esgi Very fast and powerful – during operation, the machine is fully automatic and does not require supervision (only the tool and the material being cut are of concern). Technical specifications: - Pressing force: 63 tons - Working area: 1200 mm x 650 mm - Maximum stroke: 160 mm - Maximum daylight between beam and table: 190 mm The machine is equipped with a user-friendly touchscreen control panel featuring the following functions: - Tool zero-point detection - Force adjustment - Table height adjustment after cutting - Automatic / manual operation - Machine error diagnostics The machine is in excellent technical condition after a complete overhaul, which included: - Replacement of all seals - Replacement of all bearings and traveling rollers - Comprehensive servicing of the hydraulic and mechanical systems - Complete redesign and installation of the electrical system, including safety barriers, safety relays, and PLC panel - Painting and maintenance Supplied with the machine: Original manufacturer’s documentation, wiring diagram of the new electrical installation, and CE Declaration of Conformity. Price available on request. Assistance with transport arrangements available.

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2473788, power: 35.3 kW (47.99 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 14,100 mm, overall weight: 6,500 kg, transport length: 6,500 mm, transport width: 2,290 mm, transport height: 2,070 mm, fuel type: diesel, color: red, Equipment: UVV, all wheel drive, differential lock, Technical specifications: Year of manufacture: 2020 Working height: 16.10 m Fgedpfx Ahsyqy Eye Eei Platform height: 14.10 m Platform dimensions (LxW): 1.83 x 0.76 m Load capacity: 227 kg Total weight: 6500 kg Drive: Diesel 35.8 kW/48 hp Climbing ability: 45% Platform rotation: 170° Foam-filled off-road tires All-wheel drive, differential lock, overload sensors, UVV inspection, fully functional, normal signs of use

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2473498, power: 35.8 kW (48.67 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 15,550 mm, platform length: 1,830 mm, platform width: 760 mm, overall weight: 7,300 kg, transport length: 7,250 mm, transport width: 2,290 mm, transport height: 2,070 mm, fuel type: diesel, tire size: 12 x 16,5, color: red, Equipment: all wheel drive, differential lock, Technical data: Year of manufacture: 2019 Working height: 17.55 m Fsdpfxeyqy E Ho Ah Ejgi Platform height: 15.55 m Side outreach: 9.03 m Up-and-over clearance: 7.45 m Platform size (L x W): 1.83 x 0.76 m Slew range: 360° Basket arm length: 1.52 m Travel speed: 7.7 km/h Load capacity: 227 kg Total weight: 7,300 kg Drive: Diesel 35.8 kW/48 hp Gradeability: 45% Platform rotation: 170° Foam-filled off-road tires All-wheel drive, differential lock, overload sensors, fully functional, normal signs of use

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2473668, power: 44.5 kW (60.50 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 19,380 mm, platform length: 1,830 mm, platform width: 910 mm, overall weight: 10,200 kg, transport length: 9,140 mm, transport width: 2,440 mm, transport height: 2,540 mm, fuel type: diesel, tire size: 10,5x17,5, color: red, Equipment: all wheel drive, differential lock, Technical data: Year of manufacture: 2019 Working height: 21.38 m Platform height: 19.38 m Lateral outreach: 12.19 m Up-and-over clearance: 8.38 m Slewing range: 360° Basket arm length: 1.68 m Platform dimensions (L x W): 1.83 x 0.91 m Overall dimensions (L x W x H): 9.14 m x 2.44 m x 2.54 m Load capacity: 227 kg Total weight: 10,200 kg Drive: Diesel 44.5 kW/60 HP Climbing capacity: 45% Fjdpeyqy H Dofx Ah Eogi Platform rotation: 170° Foam-filled rough-terrain tires All-wheel drive, differential lock, overload sensors, fully functional, standard signs of use.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2473518, power: 35.3 kW (47.99 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 14,100 mm, platform length: 1,830 mm, platform width: 760 mm, overall weight: 6,500 kg, transport length: 6,500 mm, transport width: 2,290 mm, transport height: 2,070 mm, fuel type: diesel, tire size: 12 x 16,5, color: red, Equipment: UVV, all wheel drive, differential lock, Technical specifications: Year of manufacture: 2019 Working height: 16.10 m Platform height: 14.10 m Platform dimensions (LxW): 1.83 x 0.76 m Fgjdpfx Asyx Uwheh Eji Load capacity: 227 kg Total weight: 6500 kg Drive: Diesel 35.8 kW/48 HP Climbing ability: 45% Platform rotation: 170° Foam-filled off-road tires All-wheel drive, differential lock, overload sensors, safety inspection (UVV), fully functional, general signs of use

Condition: used, functionality: fully functional, machine/vehicle number: 2473778, Year of construction: 2019, load capacity: 227 kg, lifting height: 259,100 mm, fuel type: diesel, power: 55 kW (74.78 HP), overall weight: 16,965 kg, total height: 2,670 mm, total length: 11,630 mm, total width: 2,490 mm, color: red, tire size: 18-625, transport length: 10,030 mm, transport width: 2,490 mm, transport height: 2,670 mm, Equipment: UVV, all wheel drive, differential lock, Technical data: Year of manufacture: 2019 Engine: Diesel 55 kW Working height: 27.91 m Platform height: 25.91 m Platform dimensions (L x W): 1.83 x 0.91 m Overall dimensions (L x W x H): 11.63 m x 2.49 m x 2.67 m Basket arm length: 1.68 m Load capacity: 227 kg Total weight: 16,965 kg Drive: Diesel 55 kW Climbing ability: 45% Fedjyylgispfx Ah Esgi Platform rotation: 170° Driving speed: 4.8 km/h Slew range: 360° Platform rotation: 170° Turning radius (inside): 3.05 m Turning radius (outside): 6.22 m Foam-filled off-road tires All-wheel drive, differential lock, overload sensors, UVV, fully functional, general signs of use.

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour Fgodpsx Ndu Djfx Ah Eei • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 1 x cleaning line DN 50/40 Fgsdoyhzq Aopfx Ah Eji 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.

Condition: used, Year of construction: 2013, functionality: fully functional, total length: 20,000 mm, We are selling used linear carwash from well known manufacturer CHRIST, year of production 2013. Carwash is complete, without chains and dry wiping. Approximate length of carwash is 20 metrov. Including: • Advertising and foam spraying portal • Double-sided brushes for washing side skirts and rims • High pressure washing portal • Portal for washing with textile brushes • Driers • Waxing platform • Detergent dispenser • Floor gratings Suitable for companies that want to increase vehicle washing capacity or install a new washing line with reliable equipment. Fodpfoxy E Azjx Ah Esgi

Condition: used, mileage: 32,610 km, power: 162 kW (220.26 HP), first registration: 10/1996, fuel type: diesel, empty load weight: 6,360 kg, maximum load weight: 4,140 kg, overall weight: 10,500 kg, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 3,650 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, Equipment: ABS, additional headlights, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 6, ABS (anti-lock braking system), differential lock, work lights, storage box, leaf suspension, low-noise G1, U-protection, roof hatch, environmental badge red Fgedpfx Aovhkfneh Eoi Wheelbase: 3650 mm Body: Fire-fighting support vehicle with Ziegler box body, 1250 l extinguishing water tank, 100 l foam compound tank & FP 16/8 pump Sales to tradesmen or export are subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, Year of construction: 2025, The laser processing center skyCUBE M - the new standard in laser material processing! PFEIFER laser processing center skyCube M Laser machine with 200W CO2 laser available immediately Mclass = machining area X 1250 x Y 650 x Z 300 mm skyCUBE M laser processing center - the new Mclass multifunctional laser engraving machine and laser cutting machine - laser processing simple - high precision - laser engraving, cutting with high speed and quality. Our new and best multifunctional talent not only impresses the most experienced user with its newly thought-out design. This CO2 laser / fiber laser shows its outstanding capabilities as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser in all industrial applications. With an optional laser power of up to 1000W (1kW), the CO2 laser device / fiber laser system can also be used extremely flexibly in your production. skyCUBE laser devices meet all the requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Fodpfxs Sfane Ah Eogi Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving many materials, such as: various metals, acrylic glass, solid wood, etc. Wood materials, wood composite materials, paper, cardboard, various plastics and Foams, textiles, and much more. The excellent execution of the laser machine 100% produced in Plauen guarantees the laser user from metal construction to the laser source a high level of work accuracy with consistently high quality. With a cutting speed of up to 8000 mm / s and an engraving speed of up to 4000 mm / s, high-quality laser technology produces clean and very sharp cutting edges and precise laser engravings. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. User-friendly and intuitive - the supplied skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to the Windows standard lets you work quickly and effectively. The software is characterized by high system stability, professional monitoring with appropriate machine operation and control as well as compatibility with common file formats. The data is output over levels - separately for each level, including the definition of the sequences and the type of processing. The parameters, such as laser power and processing speed, are automatically saved for each level and can thus be reproduced in a material database at any time. The laser projects are transferred to the skyCUBE M laser processing center with a computer connected via LAN / USB interface. From there these can be processed repeatedly without the PC having to be switched on. A modern touch control panel gives you access to all system information and functions. The skyCUBE M laser processing center at a glance: German industrial standard machine steel construction for the safe and vibration-free mounting of the laser components and axis systems, on rollable industrial leveling feet 8 "touchscreen display simply see more, control more, communicate more with the skyCUBE M laser processing center Redundant safety system - class 1 laser Security: Shutter - ᐳ active mechanical beam path closure

Condition: like new (used), Year of construction: 2022, operating hours: 13,394 h, functionality: fully functional, Battery-powered high-performance sweeping/scrubbing machine Scrub and sweep in one pass: with the M17 battery-powered ride-on scrubber-dryer from Tennant® Without chemicals, but with ec-H2O™ technology and ionized water: This is how you clean floors economically and environmentally consciously with the Tennant® M17 ride-on scrubber-dryer. In addition to the environmentally friendly cleaning technology, you benefit from the ease of use of the cleaning machine - whether in use or during maintenance. Conveniently inspect suction feet, brushes and filters via tool-free access points. The double side sweeping brushes also enlarge the cleaning path and ensure highly productive sweeping and scrubbing. The Touch-n-Go™ control panel integrated in the steering wheel enables intuitive 1-hand operation. This allows the driver to keep both hands on the steering wheel and steer the industrial scrubber-drier safely. The chemical-free ec-H2O™ technology effectively removes dirt and leaves floors without chemical residue. This improves traction and prevents slipping accidents when cleaning with the Tennant® M17 ride-on scrubber-dryer. With 2,500 psi high-pressure cleaner for removing coarse dirt Area of application: Industry Voltage: 36 V Battery voltage: 36 V/per unit Charger: external Direction of travel: Reverse, forward Dirty water tank capacity: 346 l Working width: 1220 mm Brush speed: 500 rpm Brush motor power: 1125 W Automatic brush switch-off: yes Number of wheels: 3 Wheel width: 127 mm Operator cockpit: yes Suction foot width: 1245 mm Body color: green Width: 1370 mm Drive: Battery Fsdpfxjv Hqh Hs Ah Eegi Brush material: Polypropylene (PP) Rim material: Iron Sweeping width side brushes: 785 mm Sweeping width without side brushes: 915 mm Sweeping capacity with 2 side brushes theoretical: 17560 m²/h Sweeper type: Ride-on sweeper Number of sweeping blades: 1 Power transmission: V-belt Steering wheel material: PU foam Length: 2850 mm Castors Material: Polypropylene (PP), nylon, polyester Dirt container volume: 45 l Side brushes foldable: yes UVP: 120.307 € Technical features Sweeping rollers + side brushes Height-adjustable: depending on brush pressure Practical area coverage: 10,310 sqm incl. Ech2o Climbing ability: transport (empty) 20%, transport gross weight 13%, working mode 11% Consumption: Runtime 2.9 hours Operation: Battery Battery type: Lead-acid battery Battery capacity: 775 Ah/per unit Driving speed: 5 - 9 km/h Noise level in dB(A): 75 dB(A) Fresh water tank capacity: 285 l Theoretical area coverage: 17560 m²/h Brush diameter: 230 mm Brush contact pressure: 250 kg Tire material: Polyurethane (PU) Non-marking wheels: yes Wheel diameter: 381 mm Suction lip material: Linatex Suction motor power: 1200 W Frame color: grey Height: 1480 mm Own weight: 2165 kg Number of batteries: 1 Weight without battery: 1515 kg Filter area: 51000 cm² Sweeping width with 2 side brushes: 1700 mm Sweeping capacity with 2 side brushes practical: 10310 m²/h Sweeper filter cleaning: electric Sweeping principle: Direct sweeping system Body material: ABS plastic Running time: 6.5 h Number of swivel castors: 1 Reverse gear: yes Number of side brushes: 2 Seat material: Plastic Turning radius: 3003 mm Year of construction: 2022 Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: used, 2 cylinder standing agitator tank made of stainless steel, used Contents: 50 cbm Order number: 3810 Material: 1.4401 in contact with product 1.4301 otherwise Inside weld seams ground to be food safe Dimensions: 3,000 mm internal diameter 3,100 mm external diameter 7,000 mm cylinder height 350 mm upper base 500 mm lower base 400 mm ground clearance 8,250 mm approx. total height Design: cylindrical standing on frame with conical bases Propeller agitator installed at an angle in the cylinder, 12 kW, 980 rpm. Double jacket on the cylinder, 2 circuits approx. 14 sqm, 76 liters each and on the lower floor, 1 circuit, approx. 5 sqm, 90 liters Operating overpressure 2 bar Insulation 50 mm PU foam around cylinder, upper floor and frame, stainless steel cover with manufacturer's certificate and material certificates Fodpfx Aev Dthwsh Eegi Connections: 1 manhole 340 x 440 mm in the cylinder Ventilation Ø 300 with spray head in the upper floor Outlet bottom center DN 65 extended Weight: approx. 6.5 tons

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Production line units: 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank Fedpfxjy Exrpe Ah Eegi If you are interested, we will send you a detailed description and data.

Condition: used, Year of construction: 2022, functionality: fully functional, Complete set of equipment for foam production and converting – HYMA and supplementary equipment Offer description For sale is a comprehensive set of machines and equipment for the production, processing, and converting of foams, including equipment for foaming, granulation, storage, sheeting, processing of cylindrical blocks, and precision cutting. The offer includes machines from renowned manufacturers, including HYMA, as well as auxiliary and installation equipment. The set allows for the implementation of many stages of the technological process – from foaming and material processing to its treatment and cutting. Most of the equipment dates from 2021–2022. The offer also includes an unused steam generator and an unused prepolymer tank. 1. Equipment for production and material preparation 1.1 HYMA BFH-15 foaming line (2021) Three foaming stations: - two stations for rectangular blocks with dimensions 2080 × 1080 mm and 2080 × 1580 mm, - one station for cylindrical blocks with a diameter of 1400 mm and a maximum height of 2100 mm. Two-screw mixer with a volume of 15 m³. Maximum foam density: 300 kg/m³. 1.2 HYMA GMK-80 granulator (2021) Main motor power: 55 kW. Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 1000 kg/h with a 25 mm screen. Conveyor fan: 15 kW. Loading belt conveyor: 1 kW. 1.3 HYMA GMP-75 granulator (2021): Motor power: 75 HP (approx. 55 kW). Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 500 kg/h. 1.4 HYMA GFH-330/7 silo (2021) Capacity: 45 m³. Height: 5300 mm. Diameter: 3300 mm. 2. Equipment for sheeting and processing of foam blocks 2.1 HYMA SSB precision sheeting machine for single blocks (2021) Maximum sheeting height: 105 cm. Maximum foam density: 250 kg/m³. HYMA SCH-700 carousel sheeting machine (2021) 2.2 Carousel structure for sheeting foam blocks. Table diameter: 7000 mm. 2.3 HYMA RH drilling machine for cylindrical blocks (2021) Equipment for drilling cylindrical foam blocks. 2.4 HYMA RSS-220 machine for trimming cylindrical blocks (2021) Equipment for trimming and processing cylindrical foam blocks. 3. PTV WJ2116-1Z-Dynamite CNC waterjet cutter (2022) Cutting with a pure water jet, without the addition of abrasive material. "Dry" work tank. Interchangeable tables. Working area: 2100 × 1600 mm. 4. Auxiliary and installation equipment 4.1 CERTUSS Universal 850 TC steam generator (2022) Nominal steam output: approx. 850 kg/h. Fjdpfx Ahe Agwbae Ejgi Thermal power: approx. 558 kW. Includes a water treatment station. Status: unused. 4.2 Prepolymer tank (2022) Nominal capacity: 20 m³. Status: unused. Summary The offer includes 11 items of equipment and production equipment, intended for use in a plant that manufactures and processes foams. The set may be of interest to manufacturers planning to expand existing production capacity, start a new plant, or acquire equipment for subsequent stages of the technological process. Year of equipment production: 2021–2022. Sale: preferably as a complete equipment package. The possibility of purchasing individual equipment requires agreement with the seller. Detailed information regarding the technical condition, availability, location, and terms of sale will be provided to interested buyers.

Year of construction: 2016, condition: good (used), functionality: limited functionality, The machine has been disassembled. It was in working order before disassembly. I have a video recording from before the disassembly. Sold as is, with no warranty or guarantee. Fgodpfx Ahsz Iw I As Eji

Year of construction: 1995, condition: used, Foam cutting machine, as shown in the pictures. Stored in a warehouse – under a roof. Disassembled. Sold without any warranty or guarantee. If you have any questions, I can send more pictures and dimensions. Fsdpfxsz Iy Dgs Ah Eegi

Year of construction: 2016, condition: good (used), functionality: fully functional, For sale: a fully functional hammer mill, brand ROBEX - DPH22KRL, with a belt conveyor. Year of manufacture: 2016. Mill motor power: 22 kW. If interested, please provide your contact details in your inquiry. Fgedpfxozwwvhj Ah Eei