Used Fmz 5000 for sale (2,205)

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough Hodpfxjy Uzhfe Acnst - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: good (used), machine/vehicle number: 48506457063766, Year of construction: 2018, operating hours: 3,314 h, load capacity: 3,500 kg, lifting height: 5,000 mm, fuel type: electric, mast type: other, overall weight: 5,590 kg, 4745049 Hedszqb Alopfx Acnst Der Toyota 8FBMT35 - FSW 5000 Elektro-Stapler ist eine leistungsstarke und vielseitige Lösung für den Materialtransport im Innen- und Außenbereich. Mit einer Nenntragfähigkeit von 3.500 kg und einer durchschnittlichen Hubhöhe von 5,67 Metern bietet er ...

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 4C0524, Lector Vectra 500 Hsdpfx Aow Am S Sscnst 2004 . No.:4C0524 Reliable, very good machine! width: 180cm length: 210cm Cnc cutting machine

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 5,000 l, This offer consists of a new tank with the capacity of 5000 litre and a pump with a flow rate of 75 litre per minute. It is designed to store diesel or heating oil. Hedpoi A Hlfofx Acnjt We can also offer transport separately to a specified location. Please contact us for more details.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 67,121 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 3,200 W, travel distance X-axis: 6,500 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 170 mm, overall weight: 17,000 kg, total height: 2,800 mm, product length (max.): 16,000 mm, number of axes: 5, Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details. • Working range A1 axis (pulling chuck): n x 360° • Working range A2 axis (feed station): n x 360° • Workpiece max. length of raw material: 6500 mm • Workpiece min. length of raw material: 3000 mm • Workpiece min./max. outer diameter (circular): 20–152 mm • Workpiece min./max. side length (rectangular, at max. circumscribed circle 170 mm): 20–150 mm • Workpiece max. length of finished part: 3000 mm • Workpiece min. length of tube remnant: 120 mm • Workpiece max. scrap length: 400 mm • Bundle dimensions max. cross-section: 600 x 750 mm • Bundle dimensions max. weight: 4000 kg • Material weights max. workpiece weight: 130 kg (loading 6.5 m) • Material weights max. workpiece weight per meter: 20 kg/m • Speeds X axis (+): 170 m/min • Speeds X axis (-): 100 m/min Hedpfxezlq I Hs Acnst • Speeds Y axis: 60 m/min • Speeds Z axis: 60 m/min • Speeds A axis: 780 °/s • Positioning accuracy, position deviation Pa: ±0.2 mm / ±0.015° • Positioning accuracy, mean position dispersion Ps: ±0.06 mm / ±0.005° • Smallest programmable path length: ±0.01 mm / ±0.001° • Lens cutting head focal length: 155 mm • Depth 7000 mm; Length 16000 mm (loading 6.5 m, unloading 3 m) • Laser on hours: 15786 Additional equipment • Option to reduce minimum circular tube outer diameter to 15 mm (from 20 mm) • Option to reduce minimum rectangular tube side length to 15 mm (from 20 mm) • Option to increase max finished part length to 6500 mm (from 3000 mm) • Option “Length of finished parts +1.5 m”: adds 1500 mm to finished part length • Optional 8.0 m loading system: increases max workpiece weight to 160 kg (from 130 kg)

Year of construction: 2025, condition: new, Screen drums suitable for all common screening machines such as Doppstadt SM 314/ SM414/ SM518/ SM618/ SM620/ SM720/ SM 725, Terra Select T4-T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar 18.47, 20.55, 20.72, Terex, Neuenhauser, and others. - Manufactured according to your specifications: - Perforations (including variable hole patterns within the drum) - Square or round perforations - Offset or straight layout - Minimal web widths - Welded-in spiral flights Hodpfxoxn A E Ao Acnet - Available in various material thicknesses - Perforated sheets with sharp edges, highest quality - Perforated sheets made from special steel We deliver our drums free to your door. Many models available from stock without waiting time.

Year of construction: 2024, condition: new, Screening drums suitable for all common screening machines such as Doppstadt SM 314/ SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - Offset or straight - Smallest webs - Welded spiral - In various material thicknesses - Sharp-edged perforated sheets of the highest quality Hodpfx Asumtabjcnot - Perforated sheets made of special steel We deliver our drums free of charge. Many models in stock without any waiting time.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, A used briquette press C.F. Nielsen BP 5000 in very good condition Hedpfx Aowiw Rxocnet

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Hjdpfx Acszd Ta Nenot Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Hodpfsxqh I Iox Acnst Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Middle frquency welding unit consist of: 1 pce. Welding controller BIHLER B 5000 1 pcs. Welding transformer 130 kVA Hedpsx I R Hqsfx Acnot Welding capacity: 130 kVA Power voltage: 400 V, 50 Hz.

Condition: good (used), Capacity 5000 kg. There is 2 pieces. Hsdpfx Aozlaiascnjt

Condition: used, Broschürenfertigung / Booklet Maker Duplo System 5000 Baujahr / Year 2008 - Serial-No. 080100007 Zähler / Counter 7,6 Falzungen-Heftungen Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator DC-10/60 - 2 x 10 Stations Feeder Format / Size min.120mm x 148mm - max. 350mm x 500mm Grammatur / Paper weight 40-300g/qm Stapelhöhe / Infeed height Station 60mm Geschwindigkeit / Speed max. 5.000 Product/h Broschürenfertigung / Booklet Maker DBM 500 Heften-Falzen / Stitching-Folding Format / Size min. 120x170mm; max. 350x500mm 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Hsdsxdfblopfx Acnst Presswerk / Pressing Station DBM 500-P Frontschneider / Trimmer DBM 500T Auslageband / Delivery band DBM -LS Brücke Lifing unit LUL -HM Inklusive Kompressor / Include Compressor Rietschle Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Tischmodell Blockleimpresse mit Warmluftgebläse / Table Model Block Gluing Press Müro with hot air blower  Blockleimpresse / Block Gluing Press - Müro BLP 5000 Year 2003 - Serial-No. 20/2003 Arbeitsbreite / Working width 350mm Stapelhöhe / Stack height max. 220mm mit Warmluftgebläse / with hot air blower  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Hjdpfxeynll Hs Acnet On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2002, Plotter HP 5000 Serial-No. SG17D1402P Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hjdpfetzc Rrsx Acnst On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2005, Punching capacity 220 kN plate thickness 8 mm working area 2535x1280 mm sheet thickness for stainless steel 4-6 mm Hedpfx Acezk Rfijnot

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA mounts in the crew compartment Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose Hodpfxexzu Ehj Acnet • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: used, Year of construction: 1991, Technical details: spindle diameter: 100 mm x-travel: 5020 mm y-travel: 1000 mm z-travel: 2000 mm control: Heidenhain 415 B tool taper: SK 50 • For sale without floor plate. • Equipped with an indexable universal milling head, adjustable in 2.5° increments. • 60-position automatic tool changer. • Including Scharmann rotary table (rotation function defective – sold with this known defect). Hedpozk Ezrofx Acnst • Rotary table size: 2,500 × 2,000 mm. • The machine can be inspected under power at its location in Saxony, Germany, by appointment upon request. *

Condition: like new (used), “GFA 2QL 5000/2000” for Sale Manufacturer: GFA Type: 2QL 5000/2000 Deck size: 2.000 x 5.000 mm Number of decks: 2 (Different deck-angle) Included: – Electrical Motor – Cardan Shaft – Springs Hedpjhcw T Ejfx Acnet Vibrating screen can be sandblasted and painted.

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW Hodpfxjzc I Dbo Acnjt 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T Hodpfxozmxuke Acnet

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Hodpfjyk Tuujx Acnot Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Hydraulic cylinder & unit Ejector motor & bearing Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Maintenance-free knife shaft system Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 76 mm, turning diameter: 800 mm, GURUTZPE Super AT 400/5000 lathe, with a 5,000 mm + 1,000 mm distance between centers, 820 mm swing over the bed, 550 mm swing over the cross slide, 1,150 mm swing over the tool rest, 76.5 mm spindle bore, 24 speeds from 9-500 rpm. It has a fixed steady rest and is equipped with a 3-jaw universal chuck with a diameter of 400 mm. It also comes with a separate 4-jaw independent chuck with a diameter of 600 mm. Overall, it is in good condition. Hsdpfxozmp Afe Acnst

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring head Light Sources Light source for observation: LED ring light (red, blue, green) Light source for measurement: White LED Controller: VR-5000 Observation and Measurement Range Macro mode Magnification (based on a 15-inch monitor): 12×: Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25×: Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38×: Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50×: Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode Magnification (based on a 15-inch monitor): 40×: Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80×: Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120×: Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160×: Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Height Measurement Measurement resolution: 0.1 µm Height measurement range Without image stitching in Z Macro mode: 10 mm Micro mode: 1 mm With image stitching in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setting Measurable XY area 206 x 104 mm Object table XY travel: 184 × 88 mm (motorized) Z travel: 73 mm (motorized) Load capacity: 4.5 kg Working distance: 75 mm Image acquisition element 4-megapixel CMOS, S/W Transmitter lens Double telecentric lens x 2 Receiver lens Double telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Hjdpfx Aozimlpocnet Power connection Voltage: 100 to 240 V AC, 50/60 Hz Power consumption: Max. 200 VA Environmental resistance Ambient temperature: 15 to 30 °C Relative humidity: 20 to 80% RH (no condensation) Weight: approx. 28 kg (weight of the measuring unit only: approx. 11 kg) Distance extension object table Observation software VR-5000 Version 3.3.5.75 Image stitching module VR-H3J Creates a single large image from a series of images taken with the observation software. You will see color images. Analysis extension module VR-H3CA Expands the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: used Scope of delivery: (as shown in the pictures) (Changes and errors in the technical data, information provided are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2007, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: DMB-500, total width: 1,000 mm, total length: 8,000 mm, total height: 2,000 mm, space requirement width: 2,000 mm, space requirement length: 10,000 mm, input current: 3 A, input voltage: 220 V, Dynamic booklet maker Configuration: 2 collating towers – 20 stations each (DC-10/60, serial no. 080100027 and serial no. 080100018) Stitching + folding system (DMB-500, serial no. 080100216) Trimmer unit (DMB-500T, serial no. 080100627) Max format: B3 Finished size: from 170 × 120 mm to 120 × 75 mm Counter: 4,000,000 booklets Condition: Fully operational, production-ready. Stitching heads and rollers replaced. Single owner from new. Professionally maintained and serviced by an authorized Duplo Poland service center. Location: Poland Transport: available upon request EXW – buyer responsible for dismantling and collection Videos available upon request. Hsdpfozmgg Isx Acnst If you are interested, we can arrange a live video inspection.