Used Flour Mills for sale (10,330)

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm Kjdpfx Afou Dbucsfenf weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: excellent (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, SMX 3100LS (2018) Fanuc-31iB5 X : 630 mm, Y : 300 mm (±150), Z : 2585 mm, A : 2500 mm, B : 240 (±120) deg Max. Length : 2540 mm Turning diameter : 660 mm Swing over bed : 660 mm Kjdpfx Afevk Hlpofjnf Main Chuck size : 15" (381 mm) Sub Chuck size : 12" (305 mm) Bar working Dia : 102 mm Main spindle RPM : 4000 Sub spindle RPM : 3000 Milling spindle RPM : 12000 C1 axis : 0.0001 degree C2 axis : 0.001 degree Milling spindle B axis : 0.0001 degree Tool taper : CAPTO C6 Coolant for Milling spindle 70 Bar 80 ATC 4 Long boring bar ATC AICC 600 Blocks Ball Screw cooling system : X axis Linear scales : X, Y, Z, B axis Tool setter Automatic type Hydraulic Steady rest : SMW Autoblok K5.1Z (D100-D410) Auto door Air conditioner Air gun Coolant gun Mist collector Oil skimmer Chip conveyor (Right side_hinged type) Bucket Manual books Linear Guideway MPG handle Transformer

Condition: excellent (used), Year of construction: 2022, Kunzmann WF 410 M Milling Machine (2022) Manufacturer: Kunzmann Model: WF 410 M Milling Machine Year of manufacture: 2022 Condition: used, very good, as new Operating hours: 2355h Spindle hours: 253h X-travel: 410 mm Ksdpfx Aox Ni U Neffjnf Y-travel: 350 mm Z-travel: 450 mm Main drive (100%/25% duty cycle): 6.8/13.0 kW Speed range: 1-4500 rpm Tool holder: SK 40 DIN ISO 7388-1 Feed rate: up to 5 m/min Weight: approx. 2,000 kg Fixed angle table Clamping surface: 800 x 425 mm T-slots: 6 x 14 H 7 Table load max.: 300 kg Coolant system Machine lamp Horizontal milling spindle with gearbox Scope of delivery: – Electronic handwheel HR 510 – Original documentation Without vise.

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Standard equipment: 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Kjdexx Tcmjpfx Affenf Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer.

Condition: defective spare-parts repository (used), Maho MH 600 W from training workshop, exceptionally well-maintained Dimensions Machine depth: 1800 mm Machine height: 2200 mm Machine weight: 3000 kg Table length: 900 mm Table width: 480 mm Kedpfx Aexwpyreffjnf Travels X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: used, Used Netzsch model LMZ2 stainless steel bead mill with associated parts. Unit has stainless steel peg style rotor and stainless steel jacketed chamber. Unit driven by 7.5hp, 230/460volt, 1770rpm, 3/60 electric motor with transformer. Unit includes mechanical seal. Approximately 2 litre capacity. Unit includes feed pump and control panel. All mounted on stainless steel base. Knsdpfsx Niwqjx Affof

Condition: ready for operation (used), Year of construction: 2022, travel distance Y-axis: 80 mm, overall weight: 5,964 kg, controller manufacturer: FANUC, controller model: Series Oi - TF Plus, number of slots in tool magazine: 12, This Quick Tech T8-Hybrid-YB Turning Milling machine was manufactured in the year 2021 in Taiwan. It is equipped with a Fanuc Series Oi - TF Plus control unit. Additional equipment • bar feeder Kjdpfex Niu Aox Affonf • support unit

Condition: good (used), Slotted discs, window milling tools, indexable inserts, window construction tools Ksdpfsb A S U Rex Affsnf -Slotted discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Hole: Ø 50 mm -Weight: 14 kg

Condition: excellent (used), Year of construction: 2009, Machine-Details : Stock-No. 1022-2352 Type of machine Gear Hobbing Machine - Horizontal Make MONNIER & ZAHNER Type KOEPFER MZ 120 Year of manufacture 2009 Type of control CNC Storage location Monheim (Germany) Country of origin Switzerland Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information : The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Kedpfxex Nh Sto Affonf Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,400 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, spindle speed (max.): 2,000 rpm, table length: 4,000 mm, table width: 2,000 mm, CNC Bed-Type Milling Machine SACHMANN RAMBAUDI - MP-212 HS MACH-ID 9328 Make: SACHMANN RAMBAUDI Type: MP-212 HS Control: HeidenHain iTNC530 Year: 2007 KOSMO 3 indexing head Sk-50, 0,02 Degrees, 1195 Nm Spindle extention L = 600 mm with 2000 Rpm 3D Measuring probe MP60 ATC Chain 80 Positions Coolant system 1320 L with 4,8 Bar Rotary indexing table  2000 x 1600 x 15 ton V-Axis (in feed) 1500 mm Rotation 3 U/Min HeidenHein RON 700 encoder for Table rotation Ram size 500 x 500 with 56 kW Knedox Nh H Djpfx Affof Chip conveyor  X-Axis: 6000mm Y-Axis: 2000mm Z-Axis: 1400mm Table Length: 4000mm Table Width: 2000mm Table load: 25000 Power on spindle: 37kW Spindle speeds: 2000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 15000mm Width: 8000mm Height: 6000mm Weight: 85000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm Kjdpexnymkjfx Affsnf - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: like new (used), Year of construction: 2017, operating hours: 23,043 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain TNC 640, workpiece weight (max.): 250 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 35,000 W, Year of construction: 2017 CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Milling/turning table nc: Number of pallets: 30 places with robot Table dimensions mm: 450x400 Max. workpiece weight kg: 250 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/86 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper Equipment Chip conveyor Infrared probe Rinsing gun NC swivel rotary table Knjdpfx Aox Nhraoffef Preparation for the use of the 3D quickSET Laser tool measurement for measuring tool length and diameter Direct measuring system XYZ Spindle active cooling unit MPC – Machine Protection Control Prepareted for automatation via M65 Paper band filter Machine running times Under power: 43989 Spindle Working: 23043

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, TECHNICAL DETAILS X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Spindle diameter: 75 mm Spindle speeds: 18-1,800 rpm Kedpfx Aex Ng Tveffenf Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg Knsdpfx Ajxunupeffjf

Condition: new, empty load weight: 2,830 kg, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,550 mm long x 900 mm wide), 8 lashing eyes (2 t) on the outer frame, 4 lashing boxes (5 t) in the corners, geared support winch with load and fast gear, front, 2 times folding supports, rear, , chassis and body hot-dip galvanized, also available with hydraulic ramps! , Surcharge for support frame for milling conveyor 600 ¤, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Ksdpfx Afex Ngacofenf

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Kjdpjx Nf Tbofx Affsnf Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: new, total height: 3,300 mm, cutting width (max.): 1,200 mm, overall weight: 15,000 kg, power: 37 kW (50.31 HP), saw blade length: 7,750 mm, blade width: 160 mm, The PLUS are Mebor’s most advanced horizontal sawmills, with the latest innovations. PLUS band saws bring more production and speed, as well as versatility. The HTZ 1200 PLUS is performing with unmatched productivity in the price range. It is relied on by sawmills on all continents, from soft wood sawmills to quality oriented hardwood sawmills. Key features: • Fast return speed & servo controlled blade positioning, • Fast automatic control preventing operator delays, • High speed hydraulic log manoeuvring functions, • Precision made machine with top quality components. Kodpfericwqox Affonf Mebor System® is our own system of horizontal band saws, which sets us apart from our competitors. With a Mebor band saw you will increase your productivity and yield, as well as decrease labour costs. Wood is unpredictable and for this reason Mebor band saws have a strong and robust construction. It guarantees reliability of functioning and minimises maintenance costs. Band saws adapted for your needs – for small and big sawmills.Every Mebor band saw is custom made ; therefore we supply each customer an optimal band saw for his needs. We will advise which model is most suitable for your needs and requirements. We will also adjust the configuration of the band saw; for example the distances between clamps according to the lengths of logs, equipment etc. Automatic board removing (Mebor System® ) We were the first to introduce the board removing system, which saves your time. After the band saw cuts a board, the board pusher pushes it off the band saw bed during the return of the band saw head. Simple and automatic, with no manual work. Automatic functioning - Mebor System®. It leads the operator during cutting. It provides important information, which helps him choose the optimal cutting for best output. Manual control is also available for less demanding users. Full log manoeuvring equipment is available for fast and effortless work. Precision of cutting is ensured by the solid construction and wide blades. All Mebor band saws are using wide blades (80-210 mm wide). The fact is that wide blades provide higher sawing speed, as well as better sawing precision. The high quality of your products will increase the satisfaction of your customers.

Condition: excellent (used), Year of construction: 2009, Ref:11042 . 2009 Horizon BQ-270 Excellent condition - Only 409,000 books produced! Single clamp solo binder designed for operation by one person. With auto calliper for automatic size setting Comprising: Touch-screen auto setting of thickness and cover scoring. Hand feed station Milling & roughing unit with dust bag Ksdpfx Afox Nfmhjfsnf Hot-melt spine glue unit with side gluing discs Automatic cover feeder with pressing unit Chute delivery unit Including tools, manuals and accessories Accessories: Auto calliper for automatic size setting Specification: Book size, Max: 660 x 320mm Min: 240 x 135mm Cover size, Max: 320 x 310 mm Min: 135 x 115 mm Thickness, Max: 50mm Min: 1mm Max speed : 500 cycles/hr.

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Ksdox Ngxrspfx Affonf

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories Knjdpfxov Dtmme Affsf

Condition: excellent (used), For sale: high-end precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 taper, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range of Ø2 mm to Ø32 mm (0.079” – 1.260”), allowing for the highest accuracy in machining industrial components, moulds, and technical parts. 📌 Technical Specifications: • Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France • Taper: SK40 – DIN 69871 • Adjustment range: Ø2 – 32 mm • Adjustment accuracy: 0.01 mm / 0.0004” • Precision micrometric scale with clear graduation • Set includes head + holder + KOMET tool • Condition: used, in very good technical condition – ready for work ✅ Advantages: • High adjustment precision – ideal for hole finishing Knedpfx Afjxizcvjfof • Robust industrial construction – long service life • Compatible with CNC machines and conventional milling machines with SK40 taper • Micrometric diameter setting with μm reading • Ideal for industrial applications, toolrooms, and precision manufacturing

Condition: new, total height: 2,210 mm, cutting width (max.): 1,000 mm, overall weight: 7,000 kg, power: 22 kW (29.91 HP), saw blade length: 7,200 mm, The HTZ 1100 PRO is a fast, versatile band saw. Suitable for either production or quality oriented sawmills, who are looking at lowering their operation costs, while increasing quality of sawn wood and production. Knjdpferllanox Affef

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 40167, Auction of a MAHO universal milling machine! Ksdpfx Asx Ngkzsffonf

Condition: excellent (used), For sale: Wysow 160 mm double vise, designed for milling machines and CNC centers. Robust cast iron and steel construction ensures high rigidity and stability during operation. Jaw width: 160 mm. Jaw opening: 50 mm. Weight: 29.6 kg. Hardened, serrated jaws. The two-part design allows for various configuration setups. Suitable for heavy-duty machining and work on both conventional and CNC milling machines. Good condition, fully functional and ready for work. Knsdpfsw Sfp Tex Affof

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE SAWING LINE - VTZ 1400 PLUS log band saw with BM 900 chipper canter, including all necessary conveyors - FRC chipping edger with 3D scanning and optimisation, including all necessary conveyors - Automated stacking machine Kjdpfx Afoxlym Ejfonf - Waste conveyors