Used Flexible Hose Manufactur for sale (39,074)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a high-quality Renner RS Pro 22 screw compressor, including a refrigerant dryer. The system is of German quality manufacture and is ideally suited for craft businesses, carpentry shops, metal construction, industry, and workshops with higher compressed air requirements. Bledpfxozfi Dto Adroi The additional refrigerant dryer ensures dry and clean compressed air, which extends the service life of machines and pneumatic tools. Technical data: Manufacturer: Renner GmbH Model: RS Pro 22 Year of manufacture: 2019 Type: 3440 Motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Phases: 3~ Delivery rate: 3,440 l/min Max. operating pressure: 10 bar Made in Germany CE version Equipment: Screw compressor Integrated refrigerant dryer Soundproof enclosure Industrial version Three-phase connection 400 V Maintenance-friendly design High air output Suitable for continuous operation Application areas: Carpentry Joinery Metal construction Automotive workshops Industry Craft businesses Scope of delivery: Renner RS Pro 22 screw compressor Refrigerant dryer Accessories as per scope of delivery Condition: Used - but with few operating hours - see photo Oil change performed New drive belts Functional Signs of wear and tear consistent with age and use Ready for immediate use The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Blodpfx Ajzfilwodrji Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK Easy Former PW140SR-C is a fully automatic roll feeding machine for the production of paper plates, bowls, and trays. Thanks to its modern, all-electric servo drive system, it offers high production output, maximum precision, and energy-efficient operation. The machine was specifically designed for manufacturers of sustainable paper packaging and is ideally suited for the economical production of a wide variety of disposable paper packaging. The quick tool change allows for flexible production of different formats and products. ### Highlights * Fully automatic production process (feeding, heating, forming, punching, and counting) * All-electric servo drive * Suitable for round, rectangular, and oval products * Quick tool change for different formats * Integrated punching system * Low tool and maintenance costs * User-friendly touchscreen control * Robust and durable machine construction * High production accuracy ### Products that can be manufactured * Paper plates * Paper bowls * Paper trays * Curl containers * Flat-rimmed plates * Various disposable paper packaging ### Technical data * Working speed: up to 28 cycles/minute * Table size: 660 × 420 mm * Maximum roll width: 620 mm * Maximum roll diameter: 1,500 mm * Paper thickness: 0.30 – 0.60 mm * Forming tools: up to 3 tool sets * Punching tools: up to 3 tool sets * Main drive: servo motor * Total power: approx. 31 kW * Machine weight: approx. 4,100 kg * Machine dimensions (L × W × H): 5,120 × 1,800 × 2,278 mm ### Standard equipment * Automatic roll unwinder * Automatic product stacking system * Intuitive touchscreen control ### Included in the scope of delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians Bodjzg E Hgjpfx Adrsli ✅ Machine commissioning on-site ✅ Free training and instruction of your operating personnel ✅ Comprehensive after-sales service and technical support even after installation ### Machine type Roll feeding machine for the production of paper plates and paper packaging KMK Easy Former PW140SR-C

Condition: used, Various dial indicators from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125mm Scale value: 1/100 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50mm Scale value: 1/100 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50mm Scale value: 1/100mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95mm Scale value: 1/100mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 Pos8 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100mm Scale value: 1/100mm Locking screw missing Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100-125 mm Scale value: 1/100mm Pos16 Manufacturer: Mahr Measuring range: 170-195 mm Scale value: 1/100mm Pos17 Manufacturer: Mahr Measuring range: 170-195 mm Scale value: 1/100mm Pos19 Manufacturer: Hommel Werke Measuring range: 200-225 mm Scale value: 1/100mm Pos23 Manufacturer: Mahr Measuring range: 145 - 170 mm Scale value: 1/100mm Pos26 Manufacturer: Kern Measuring range: 0 - 25 mm Scale value: 1/100mm Pos28 Manufacturer: Unknown Measuring range: 70 - 95 mm Scale value: 1/100mm Pos29 Manufacturer: Unknown Measuring range: 25 - 50 mm Scale value: 1/100mm Pos30 Manufacturer: Mitutoyo Measuring range: 25 - 50 mm Scale value: 1/100mm Pos35 Manufacturer: Mahr Measuring range: 120 - 145 mm Scale value: 1/100mm Pos36 Manufacturer: Mahr Measuring range: 145 - 170 mm Scale value: 1/100mm Pos37 Manufacturer: Mahr Measuring range: 170 - 195 mm Scale value: 1/100mm Pos38 Manufacturer: Steyr Measuring range: 150 - 175 mm Scale value: 1/100mm Pos39 Manufacturer: Steyr Measuring range: 175 - 200 mm Scale value: 1/100mm Pos40 Manufacturer: PAV Measuring range: 250 - 275 mm Scale value: 1/100mm Thread measuring gauges - Micrometer gauges Gauge - Dial indicators – Measuring device, e.g. for gear measurement – External measuring tool – Plate micrometer - Fine measuring gauge - Precision measuring device - Dial indicator Dial indicator Price negotiable Price per piece € 35,-- net ex works, plus packaging costs Subject to typographical errors in all technical specifications. Bledpoyhmwqjfx Adrei Sale exclusively in EU countries.

Condition: used, functionality: fully functional, Various used rack milling cutters / rack group milling cutters from different manufacturers. Our asking prices are net, ex works, plus packaging costs, starting from €170. Individual prices as follows: Manufacturer: Arnold Dold GmbH & Co.KG Module 0.5 - Group milling cutter - Asking price €370 Module 0.7 - Group milling cutter - Asking price €380 Module 0.9 - TIN coating - Asking price €530 Module 1 - 2 units available - Group milling cutter - Asking price €390 Module 1.25 - Group milling cutter - Asking price €410 Module 1.5 - TIN coating - Asking price €750 Module 1.75 - Group milling cutter - Asking price €730 Module 2 - 4 flutes - one defect - 1.89 kg - Asking price €210 Module 2 - TIN coating - Asking price €770 Module 2.5 - 8 flutes - one defect - 13.52 kg - Asking price €470 Module 3 - one defect - 13.29 - Asking price €230 Module 3 - 7 flutes - Reground - 13.77 kg - Asking price €200 Module 3 - 3 flutes - Asking price €290 Module 3 - TIN coating - Asking price €520 Module 5 - 4 flutes - Reground - 12.15 kg - Asking price €170 Module 5 - 4 flutes TIN coating - Asking price €750 Module 6 - 3 flutes TIN coating - Asking price €760 Module 6 - 3 flutes TIN coating - Reground - 11.16 kg - Asking price €400 Module 7 - 3 flutes Reground - 11.41 kg - Asking price €430 Module 8 - 3 flutes Reground - 5.28 - Asking price €190 Module 8 - Reground - Asking price €450 Module 8 - TIN coating - Asking price €780 Module 10 - TIN coating - Asking price €790 Module 10 - Reground - Finished milling cutter - 0.515 kg - Asking price €320 Module 12 - 2 units - TIN coating - Finished milling cutter - Asking price €580 Module 13 - Finished milling cutter - Asking price €410 Module 14 - Reground - 5.18 kg - Asking price €240 Module 16 - Asking price €600 Module 16 - Reground - 5.14 kg - Asking price €300 Involute angle: 20° BPII-Ü Bore diameter [mm] 40; 50; Groove [mm] 10: 12 Width [mm] 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Outer diameter [mm] 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor - Wälztechnik ZORN GmbH & Co. KG Module 1 - 16 flutes TIN coating - one defect - 10.18 kg - Asking price €510 Module 1 - 16 flutes TIN coating - Asking price €590 Module 1.5 - 9 flutes Group milling cutter 9 flutes - Asking price €560 Module 2 - Pin milling cutter - Asking price €390 Module 6 - Pin milling cutter - Asking price €640 Module 10 - TIN coating - Asking price €350 Involute angle 20° DIN 3972 II - Ü or DIN 3972 II Kl. A - Ü Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 52/60; 55/85; 60/90; 33/40 Outer diameter [mm] 176; 200; 198; 199 Blodpfx Adoytrh Ejroi Manufacturer: Klingelnberg Module 2.5 - Asking price €360 Module 2.75 - Asking price €380 Module 3.25 - Asking price €170 Module 3.75 - Asking price €200 Module 4.5 - Asking price €220 Involute angle 20° Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 30/38; 28/36; 35/42; 39/47; 44/52 Outer diameter [mm] 148; 149; 150 Subject to typing and calculation errors. Sales are exclusively within the EU countries.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Holzkraft / SCM Minimax FS 41e Jointer and Thicknesser The machine was manufactured in 2017 and is in exceptionally well-maintained condition. The solid cast iron tables are clean and show only minor signs of wear. Equipped with the proven Tersa cutterhead, the machine allows for quick blade changes and excellent planing results. The FS 41e is an ideal solution for carpentry shops, joineries, interior fitters, and demanding craft businesses that value precision and reliability. Technical data Manufacturer: SCM / Holzkraft Model: Minimax FS 41e Year of manufacture: 2017 Machine number: available Planing width: 410 mm Jointer and thicknesser Tersa quick-change cutterhead Voltage: 400 V Frequency: 50 Hz Three-phase connection CE-compliant design Max. blade thickness: 16 mm Equipment Tersa cutterhead system Solid fence Large, precision cast iron tables Central thickness adjustment Digital thickness display Dust extraction connection Emergency stop switch Robust industrial design Very smooth and quiet operation Condition Very well-maintained overall condition Year of manufacture 2017 Cast iron tables in very good condition Tersa cutterhead without any visible damage Immediately ready for use Scope of delivery Holzkraft Minimax FS 41e Fence Tersa cutterhead Protective and operating devices as shown in the images Special features High-quality machine from SCM Professional design for daily workshop use Quick blade changes thanks to the Tersa system Bedpfx Adjzdtp Roreli High surface quality when planing Space-saving combination of jointer and thicknesser Shipping possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, intermediate sales and changes reserved. All information without guarantee.

Condition: new, Year of construction: 2025, rotor diameter: 950 mm, Set of shredding shafts, NEWly manufactured. Bsdpfxjiwxngo Adrsli These shafts are available with various blade configurations. The following are currently available: Size Hammel 450 / 650 / 750 / 850 / 950 or Arjes 750 | 850 | Impaktor 250 | Titan 900 or Lindner U-75 | U-4000 | U-95 From 5 to 11 knives per support disc are possible, 5 to 12 support discs are possible. You determine the degree of shredding, we determine the number of knives and discs for the shafts. We are also happy to accommodate your requests. Please include your company address and contact details in your inquiries. This will allow us to prepare a quote immediately and send it to your personal email address. sv p-rt com

Condition: used, machine/vehicle number: 008608, X axis working area: 2500 mm Blsdpfozcmn Sjx Adrji Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84

Condition: ready for operation (used), Intel PBA 455084-002 Flexible Disc Controller Card, used, 100% functional. Bodpfx Aei Ebt Esdrjli

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm Blodpfxozd Sqaj Adrei * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, 3 production and assembly lines for rims (e-bikes) Blodewulrbjpfx Adroi

Condition: excellent (used), Year of construction: 2018, operating hours: 15,418 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, feed length X-axis: 1,520 mm, feed length Y-axis: 1,150 mm, feed length Z-axis: 245 mm, feed rate X-axis: 22 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 22 m/min, controller manufacturer: Datron, controller model: Datron Next, workpiece length (max.): 1,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 200 mm, total height: 1,970 mm, total length: 2,420 mm, total width: 2,280 mm, table width: 1,000 mm, table length: 1,500 mm, rotational speed (max.): 40,000 rpm, overall weight: 2,500 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 8 h, spindle motor power: 3,000 W, spindle nose: HSK-E25, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 400 V, type of input current: three-phase, For sale is a Datron MLCube high-speed milling machine, *manufactured in 2018, in very good condition and fully operational*. The machine is currently in continuous production use and can be inspected and demonstrated under power by appointment. The absolute highlight of this offer is the *high-frequency spindle, which was recently replaced and has only 8.10 hours of runtime – practically a brand-new spindle*. The next scheduled machine maintenance is not due until after approximately 1,243 additional operating hours, saving the buyer immediate maintenance costs. The Datron MLCube combines the precision and rigidity of a vertical machining center with the agility and compact footprint of a gantry milling machine. With a machining area of 1,500 × 1,000 mm and a small footprint, it is ideal for large-format sheet metal processing. The modern Datron Next control system with a 24" touch display enables intuitive operation and quick setup times. *COMPLETE TECHNICAL DATA & EQUIPMENT* Manufacturer: Datron AG, Ober-Ramstadt Model: MLCube Year of manufacture: 2018 Condition: Very good – well-maintained, in continuous production Control system: Datron Next (24" Multi-Touch Display + Handheld Control Panel B10-2) Spindle: 3 kW HF spindle, HSK-E25, 40,000 rpm Spindle runtime (new spindle): 8.10 hours – practically brand new! Total machine runtime: 15,418.17 hours Next maintenance due in: 1,243.30 operating hours (interval: 2,000 h) Travel (X × Y × Z): 1,520 mm × 1,150 mm × 245 mm Machining area: 1,500 mm × 1,000 mm × 200 mm Feed rate / Rapid traverse: up to 22 m/min Tool changer: 12-position, HSK-E25 (expandable to 24 positions) Tool holder: Schunk Tribos collet chuck incl. clamping device Lubrication: Minimum Quantity Lubrication (MQL), 5-liter ethanol tank + 5-liter reserve tank Measuring technology: Renishaw 3D workpiece probe with camera Clamping system: Vacuum table incl. vacuum pump Machine table: Mineral casting (vibration-damping, thermally stable) Installation dimensions (W × D × H): 2,420 mm × 2,280 mm × 1,970 mm Weight: approx. 2,500 kg Power connection: 3 × 400 V, 50 Hz *AREAS OF APPLICATION* Electronics industry: Front panels, housings, membrane keyboards, PCB milling, test adapters Aerospace: Aluminum sheet and profile machining Advertising technology / Trade fair construction: Sign machining, profile machining Medical technology: Precision parts, fixtures Automotive supplier industry: Precision CNC machining Printing industry: Hot stamping dies, embossing tools General: Prototypes, contract manufacturing, aluminum, non-ferrous metals, plastics, composites *TERMS OF SALE* Price: 150,000 € net (plus 19% VAT) – fixed price Bodpfx Ajzdrurodroli New price of the machine: approx. 200,000 € Inspection: Under power – possible by appointment Dismantling / Transport: By the buyer (crane loading possible upon agreement) Invoice: A regular invoice will be issued Warranty: None (commercial sale with exclusion of liability for defects) Reason for sale: Strategic shift to steel machining – new purchase planned If you are interested or have any questions, please do not hesitate to contact us. Inspection under power is possible at any time by appointment. Ernst Neumärker GmbH & Co. KG Lohstraße 13 58675 Hemer

Condition: used, Year of construction: 2008, functionality: fully functional, MEBAeco 335 A Bandsaw Machine Technical Specifications Type: Straight cut 90° Sawing process: NC automatic Automation: Automatic series cutting Cutting range: Round material at 90°: Ø 335 mm Flat material at 90°: 500 × 335 mm Drive power: 3 kW Saw blade: 4400 × 34 × 1.1 mm Maximum load weight: 250 kg/m Year of manufacture: 2008 Bljdpfxjzdlx De Adrji MEBAeco 335 A bandsaw machine, year of manufacture 2008, for automatic series cutting. Cutting capacity up to Ø 335 mm or 500 × 335 mm. Equipped with NC control, 3 kW drive, and saw blade 4400 × 34 × 1.1 mm. Maximum material load 250 kg/m.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21610229, Spring coiling machine WAFIOS ASF3; for torsion and leg springs. Wire diameter: 1.0–3.5 mm. Max. spring diameter: 50 mm. Leg length: 115x130 mm. Fully functional, including accessories (see pictures) and pay-off reel. Bedpfx Adjyg Nitjroli

Condition: new, Year of construction: 2026, functionality: fully functional, STREET VACUUM CLEANER “ CITY ANT AQUA “ Equipment for cleaning urban areas, streets, sidewalks, parks, stadiums, railway stations, airports, parking lots, industrial areas from different waste. Street vacuum cleaner City Ant works on electrical accumulators which provide 9-hour autonomous work. It can be charged in the nighttime from the 220V. Easy-to-push vacuum cleaner can be used by one hand, noiseless. Changing the trash bag takes only 2-3 minutes. No air pollution. It can take all the waste: wood, steel, plastic, paper, carton pieces, textile waste, leaves, cigarette butt, cans and bottles (glass, plastic and metal) etc. City Ant fits different areas: concrete, asphalt, pavement, lawn, sand, etc. Technical specifications: - Electric motor - 48V / 1200W - 48V / 1200W electric drive - enabling forward and reverse travel - Waste collector type - hopper; - Vacuum power 1.2 Kw; - Maximum speed 6 km/h; - Hopper capacity 240l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2,5 m; - Autonomous work time 8 h; - Charging time 10-12 h; - Wheels Ø 320mm; - Doble nebulizers; - Dust filter with an area of 16 m²; - Hill climb up to 25% - Possibility of overcoming curbs by 15 cm. - Sprayer: 2 - external and internal. Blodsvriluspfx Adroi - Warning lamp Price- 11500, 00 Euro + aqua function 1000 Euro netto The CITY BEETLE is a professional electric street cleaning trolley designed for the efficient and effortless collection and sorting of litter gathered from pedestrian streets, pavements, alleys, parks and the surrounding areas of various sites. It ensures many hours of uninterrupted work without physical strain, even during long shifts. Features • The trolley holds up to 20 litres of liquid and is equipped with special mounts for securing cleaning equipment. • It easily passes through turnstiles at bus and train stations. • The battery can be charged anywhere using a standard 230 V socket. • Special mounts allow tools to be easily attached to the trolley. Key benefits of the CITY BEETLE street cleaning trolley: Mobility: speed of up to 6 km/h for quick cleaning of large areas Environmental friendliness: safe for people and the environment Versatility: collects and sorts waste, washes away dirt with water Cost-effectiveness: low energy consumption and minimal maintenance Safe operation: electromagnetic brakes, optimal tyre pressure, IP54 protection Technical specifications: • Dimensions: 2300 × 1500 × 1200 mm • Weight: 410 kg (empty) • Main waste container: 1 × 240 l • Additional waste containers: 2 × 120 l • Water tanks: 2 × 10 l • Spray angle adjustment: Available • Motor power: 1.2 kW • Battery runtime: Up to 8 hours without recharging • Charging time: 10–12 hours • Wet cleaning function • Noise level: 65 dB • Wheel size: Ø320/Ø400 mm, with electromagnetic brakes for safe operation • Tilt angle: up to 10° • Protection class: IP54 (dust- and water-resistant) • Pump capacity: 3.6 l/min • Maximum pressure: 0.6 MPa

Year of construction: 1979, condition: good (used), Hydraulic hose press, crimping tool, crimping machine, crimping jaws, crimping tool, hose press -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm Bsdpfozbirksx Adrjli Accessories: see photos -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg

Condition: used, Year of construction: 2015, operating hours: 12,440 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 185 mm, nominal power (apparent): 30 kVA, spindle speed (max.): 42,000 rpm, input voltage: 415 V, type of input current: three-phase, Matsuura Lumex Avance-25 – Hybrid Additive Manufacturing System (used) For sale is a Matsuura hybrid additive manufacturing system, Lumex Avance-25. The system combines additive manufacturing (metal – sintering, SLM, LPBF) and simultaneous machining (milling) in a single process. This makes the system particularly suitable for applications where functional surfaces or precise geometries are to be machined directly after the build. The system is designed as an open system: build parameters can be adjusted and further developed according to one’s own discretion and based on one’s own experience. This also makes it ideal for research purposes and for developing new material and process parameters. The Lumex Avance-25 is available in a titanium specification; the air filter and extraction system are explosion-proof for powder handling. The following powder types can be used: Bjdpfx Ajy Drwvedrsli Martensitic steel II (1.2709) Stainless steel 630 Stainless steel 316L Cobalt chrome Nickel alloy 718 (Inconel 718) Aluminum Si10Mg Titanium 6AI4V (with appropriate shielding gas supply) It is possible to build with other materials or powder types if the build parameters are developed accordingly. Details Year of manufacture: 2015 12,439 spindle hours 3,476 laser hours Possible build size approx. 250x250x180 Max. table load 90 kg Laser power 40-400 watts (variable) Laser wavelength (nm) 1070 +/-5 Tool positions for milling tools: 20 Accessories Lumex CAD / CAM system Basic and advanced function for sintering Basic and advanced function for milling Geometry processing Simulation Generation of process data Transfer of process data Support function for machining and quality Price has been reduced!

Condition: good (used), Included in the scope of delivery: 01x Light water hose Material: Polyvinyl chloride (PVC) Material color: black Diameter: 12.7 mm (1/2 inch) Length: 20 m Suitable for up to 200 psi (13.8 bar) Durable, 3-layer construction Weight: 2.60 kg Your contacts at our company: Mr. Andre Evering Bedjw Ryl Tspfx Adrsli Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any transport or shipping of this item beyond pick-up is subject to additional costs, which can be inquired with us depending on the delivery location and scope of delivery.

Condition: excellent (used), EOS P 396 Laser Sintering System Manufacturer: EOS GmbH Type: P 396 Machine Type: Industrial SLS laser sintering system for plastic components Process: Selective Laser Sintering (SLS) For sale is a professional, industrial laser sintering system from EOS GmbH. The system was developed for the additive manufacturing of plastic components using the Selective Laser Sintering process and is suitable for prototyping, small-series production, research and development, as well as industrial production applications. Technical Data Technology: Selective Laser Sintering (SLS) Usable build volume: 340 x 340 x 600 mm Build rate: up to 48 mm/h (material-dependent) Layer thicknesses: 0.06 mm 0.10 mm 0.12 mm 0.15 mm 0.18 mm Laser system: CO₂ laser Laser power: 70 W F-Theta precision optics Scanning speed up to 6 m/s Laser class 1 Voltage: 400 V 3~ / N / PE Frequency: 50 / 60 Hz Rated power: 10 kW Current draw: 16 A Fuse rating: 32 A Supply: Integrated nitrogen generator External nitrogen connection available Compressed air supply required: at least 10 m³/h at 5,000 hPa Software EOS PSW EOS RP Tools EOSTATE Interfaces STL Ethernet Bodpfx Adozarg Ujreli Certifications CE NFPA EN 60825-1:2007 Maintenance Condition Current service and maintenance records are available. According to the available service reports, the following work has been carried out, among others: Heating elements replaced Roller belt replaced X-axis and carriage cleaned Laser window and mirrors cleaned Seals replaced Safety circuits checked Docking Station / Powder Supply Docking station with pneumatic conveying system for automated powder supply to the laser sintering system. Manufacturer: HYDAC Cooling GmbH Type: FWKS-G2-001500-W-W-R25-2-IW-UL Electrical data: 230 V ±10 % 1 PH / 50-60 Hz Max. current draw: 8.0 A ICC / SCCR: 10 kA CE / RoHS Additional Equipment Control panel Docking station Pneumatic conveying system 2 x EOS Multibox Capacity per Multibox: approx. 230 liters For storing, collecting, and transporting fresh and used powder. Dimensions and Weight System including control cabinet: approx. 1,840 x 1,175 x 2,100 mm Control panel: approx. 950 x 700 x 1,550 mm Total weight of laser sintering system: approx. 1,400 kg Recommended installation space: at least 4.3 x 3.9 x 3.0 m Areas of Application Additive Manufacturing Rapid Prototyping Small-Series Production Automotive Industry Mechanical Engineering Aerospace Medical Technology Research and Development Scope of Delivery EOS P 396 Laser Sintering System Control panel Docking station 2 x EOS Multibox Available documentation Service reports Accessories and components as shown in the pictures Condition Used Machine from industrial use Optical condition as shown in the pictures Scope of delivery as shown Inspection and testing on site possible and expressly desired after prior appointment. Shipping or freight forwarding possible. Availability: upon agreement. Scope of delivery as shown. Changes and errors in the technical data as well as prior sale are reserved.

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Bledpfewvf E Djx Adrei

Condition: used, - Diameter: 27 – 36 mm, Blsdolkcipjpfx Adrei - Internal thread approx.: 30.5 mm, - 5 x 1.5 m, - 1 x 5 m.

Condition: new, functionality: fully functional, Year of construction: 2026, Asphalt Hot Box НВ-2 With Asphalt Hot Box HB-2 by TICAB TM you can deliver hot asphalt from the asphalt plant to the place of road works, with minimal heating loss. Blodpfx Aot It Dvedrei Thermal insulation of the container with quality mineral wool allows to keep the working temperature of the asphalt up to 12 hours without additional heating. At the same time, the HB-2 is additionally equipped with a Beckett diesel heating system and a Thermal Controller. HB-2 is equipped with a hydraulic lifting system. There is a manhole on the top of the tank for loading the hot asphalt. Asphalt Hot Box HB-2 by TICAB TM is easily mounted on the truck body or on a trailer. SPECIFICATIONS: - Capacity - 1,8 m3 TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Blodjx A Hdxepfx Adrei Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Condition: used, Year of construction: 2009, operating hours: 67,500 h, functionality: fully functional, machine/vehicle number: 2.7681.023, For sale: WAFIOS BMZ 42 CNC tube bending machine, year 2009. We are offering a CNC tube bending machine from the premium manufacturer WAFIOS, model BMZ 42. The machine has been used in production and is suitable for the precise, serial production of bent wire and tube components. Technical data: manufacturer WAFIOS, type BMZ 42, year of construction 2009, serial number 2.7681.023, operating hours approximately 67,500 h, location: Northern Italy, province of Bolzano. The machine has a robust construction and is currently still in operation and used for complex tube applications in the automotive industry. The machine is sold complete with protective casing. Used condition, machine in production, further details on condition and accessories available upon request. Machine supplied as inspected, including available documentation. Inspection possible by appointment, loading assistance provided. If interested, please contact us. Price negotiable. Bledpfezb U Tgex Adrji

Condition: like new (used), functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, rotational speed (max.): 10,000 rpm, shaft diameter: 12 mm, mount diameter: 10 mm, shaft length under head: 2,000 mm, space requirement height: 3,000 mm, 5 x Pferd Mammut – Electronic Suspension Motors: In stock at Kinket SSP B.V. These suspension motors offer an excellent solution for a variety of industrial applications, such as grinding, polishing, brushing, and milling. Features of 5 x Pferd Mammut – Electronic Suspension Motors: Infinitely Variable Speed Control: The Pferd suspension motors are equipped with infinitely variable speed control, from 100 to 10,000 rpm. This allows you to select the optimal speed that suits the specific tasks and materials you are working with. This gives you complete control over your machining processes. Complete Package for Immediate Use: At Kinket SSP, we supply the used suspension motors including the necessary sliding contacts and a 12-meter-long VAHLE contact rail. Versatile: Whether you work in metalworking, woodworking, plastics processing, or other industries, these flexible shaft suspension motors offer versatility and performance that meet your requirements. Their proven track record in various applications makes them a reliable choice for a wide range of machining needs. Quality: The 5 flexible shaft machines are in excellent condition. Each machine has been carefully inspected. Summary: 5 x PFERD flexible shaft machines 5 x suspension brackets 5 x flexible shaft 12x2000mm 5 x straight handpiece 1 x 12-meter-long VAHLE contact rail These machines are fully comparable to the Suhner Rotomax suspension motors. Current new price approximately: €36,000 Selling price of this well-used set: €22,000 We also have several new and used flexible shaft machines available in stock (approximately 30 units) from the brands Suhner / Biax and Pferd. If you are interested in a mobile or stationary machine, that is also possible. In addition, we also have several used and new handpieces in stock. Belt sander / angled handpiece with collet or M14, etc. Please ask us about our current inventory. Bsdpfx Aetvfnuodrsli