Used Flatbed Cutting Plotter for sale (17,034)

Condition: ready for operation (used), functionality: fully functional, Manufacturer: Cosen Guedpfxoz Ap A Ds Ak Ueg Model: NC4038H Horizontal Dual-Column Band Saw Rectangular Capacity (Height): 401.32 mm Rectangular Capacity (Width): 381 mm

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) Godpfx Asxzr Hpek Usug _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 8,065 h, machine/vehicle number: 8008, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BECKHOFF, laser type: fiber laser, laser source manufacturer: nLight, laser source model: 15000, laser power: 15,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, table length: 25,100 mm, table width: 3,100 mm, table height: 900 mm, working length: 25,100 mm, working width: 3,100 mm, working height: 900 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.35 mm, workpiece weight (max.): 24,750 kg, type of cooling: water, overall weight: 55,000 kg, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We are offering for sale a state-of-the-art NUKON EXTREME LARGE laser cutting machine from 2022, equipped with a 15 kW nLIGHT fiber laser source with Corona technology, CNC control, and Beckhoff drives. The machine is in continuous production use, fully operational, and available for viewing during operation. This solution is designed for the most demanding production facilities engaged in cutting large-format parts, steel structures, and thick sheets. Technical data: Manufacturer: NUKON Model: Extreme Large 30250 BEVEL Year of manufacture: 2022 Laser power: 15 kW Laser source: nLIGHT Fiber Laser with Corona technology Working area: 3000 × 25000 mm Cutting head: BEVEL – bevel cutting up to ±45° CNC control: Beckhoff Servo drives: Beckhoff Equipment and advantages: - High-performance nLIGHT laser source equipped with Corona technology, enabling dynamic adjustment of the laser beam characteristics depending on the material type and thickness, resulting in higher edge quality, faster piercing, and increased production efficiency; - Professional Beckhoff control and automation system, valued for its speed, precision, and reliability in industrial applications; - BEVEL cutting head, allowing for the execution of welding bevels without the need for additional processing; Gedpszphkmefx Ak Usug - Ability to cut large-format sheets up to 25 meters in length; - High dynamic performance and excellent cutting quality; - Ideal for the production of steel structures, components for heavy industry, energy, offshore, shipbuilding, and machine manufacturing. Technical condition: The machine was commissioned in 2022 and has been in operation at a production facility ever since. It is regularly serviced, is in very good technical condition, and is still in use, allowing for the possibility of conducting tests and viewing the machine during operation in production. The buyer has the opportunity to perform their own cutting tests and thoroughly check all the functions of the device before purchase. Upon request, we can provide additional photos, videos of the machine in operation, and a complete technical specification. We invite you to contact us for detailed information and to arrange a demonstration of the machine. PRICE: 300,000 EUR

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. Gedpfx Ajzu Nm Hsk Uoug * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: used, Year of construction: 1941, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 860 mm, turning length: 2,500 mm, center height: 400 mm, workpiece weight (max.): 10,000 kg, spindle bore: 57 mm, total length: 5,100 mm, total width: 1,860 mm, rotational speed (min.): 6 rpm, rotational speed (max.): 250 rpm, Equipment: documentation/manual, For sale: Oerlikon DM4S conventional lathe, manufactured in 1941. Dimensions: Gsdpfx Akey Tapls Usug Estimated weight: 10 tons Center height: 400 mm Footprint: 1860x5100 mm Distance between centers: 2500 mm Spindle bore: 57 mm Options: Multi-fix turrets 4-jaw chuck Ø1050 mm Rapid traverse Numerous accessories... Inspection and testing possible at 1822 Chernex, Switzerland. Price: 5,000 Euros (negotiable) Travel and transportation costs are the responsibility of the buyer. More photos or videos are available upon request. Please contact me for further information.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Equipped with a roller conveyor. Cutting capacity: Ø 400 mm. Gujdpez Ap Exjfx Ak Ujg Machine weight: 2,850 kg.

Condition: good (used), functionality: fully functional, Year of construction: 2020, operating hours: 11,706 h, machine/vehicle number: 295269, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Mazak, controller model: FX30I-L5, laser type: CO₂ laser, pipe length (max.): 15,000 mm, - Auction Machine - For sale: a MAZAK laser cutting machine, model 3D FABRI GEAR 400 III - 4.0kW laser, serial number 295269, year of manufacture 02/2020, weight 38,900 kg, with MAZAK FX30I-L5 control, operating hours approx. 11,706, with 15 m loading and 15 m unloading area; special accessories: 8.5" cutting head without lens (M5) with non-contact height sensing, touch sensor, chain conveyor, detachable impulse handwheel, MtConnect adapter, Mazak FG CADCAM programming software, and more. Gsdpfx Akozm R H Se Uoug Would you like to inspect it? The tube laser can be inspected at our location in DE-84339 Unterdietfurt. Interested? Further information and documents are available upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MAX 12kW mit CE, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,500 mm, working length: 12,500 mm, travel distance X-axis: 12,000 mm, travel distance Y-axis: 14,300 mm, travel distance Z-axis: 560 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, type of input current: three-phase, total length: 32,500 mm, total width: 3,900 mm, total height: 3,750 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, ACME T-Series Tube Laser – Heavy-duty tube laser for the highest demands The ACME T-Series was specifically developed for the processing of large, heavy tubes and profiles. Thanks to its robust machine construction, powerful clamping technology, and high load-bearing capacity, the system is ideal for steel construction, plant engineering, mechanical engineering, and the series production of large components. The combination of high dynamics, extreme stability, and state-of-the-art fiber laser technology enables precise cuts even with large tube diameters and heavy workpieces. Your advantages at a glance ✔ Processing of heavy tubes and profiles with high load capacity ✔ Suitable for round, square, rectangular, and special profiles ✔ High cutting speed with maximum precision ✔ Automatic material feed for efficient production processes ✔ Robust machine construction for low-vibration operation ✔ Intelligent CNC control with easy operation ✔ Reduced non-productive times through automated processes ✔ Perfect for industrial continuous operation Technical highlights Designed for heavy tubes and profiles High load-bearing capacity for material handling State-of-the-art fiber laser technology Precise cuts even with large material thicknesses Automatic loading and unloading systems High acceleration values for short cycle times Intelligent nesting and cutting software Optimized for high production volumes Typical application areas The ACME T-Series is the ideal solution for: Gsdpezb Uq Sofx Ak Uoug Steel and hall construction Machine and plant engineering Vehicle construction Agricultural machinery construction Commercial vehicle industry Structural and metal construction Energy and offshore technology Job manufacturing Maximum performance for large tubes Where conventional tube lasers reach their limits, the strength of the ACME T-Series begins. The robust construction enables the economical processing of heavy and large-sized tubes while maintaining the highest cutting quality. The powerful clamping technology ensures that even long and heavy workpieces are guided safely, resulting in consistently high processing accuracy. The system reduces material handling, increases productivity, and sustainably lowers production costs. Why the ACME T-Series? More load capacity. More precision. More productivity. The ACME T-Series was developed for companies that want to process large tube cross-sections and heavy profiles efficiently and economically. With its robust design, modern automation, and high process reliability, it is the ideal solution for industrial tube processing in the heavy-duty sector. Laser Handels und Service GmbH Your partner for tube lasers, flatbed lasers, laser welding technology, spare parts, and service in Germany. Consulting, installation, training, and technical support from a single source.

Condition: good (used), Year of construction: 2007, functionality: fully functional, total width: 4,015 mm, total length: 13,640 mm, total height: 940 mm, overall weight: 8,300 kg, input current: 32 A, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, Project / Item: Used Hegla glass cutting line (year of manufacture 2007) Hegla EcoLam 37 Plus: Laminated safety glass (LSG) cutting system with integrated loading arms. (2007) Hegla LT 2034: Fixed transport table for glass transfer within the cutting line. (2007) Hegla LKTR 7034: Combined transport and tilting table, equipped with air cushions and conveyor belts. (2007) 2. TECHNICAL SPECIFICATIONS OF THE SYSTEMS 2.1 Hegla EcoLam 37 Plus (LSG cutting system) - Equipment: Integrated loading arms for automatic/manual glass handling - Dimensions: Length: 3,280 mm | Width: 4,780 mm | Table width: 4,015 mm - Working height: 940 mm Guedpfxsz Apcws Ak Ueg - Maximum glass dimensions: 6,100 mm x 3,210 mm - Maximum cutting length: 3,700 mm - Stop length: 160 mm to 2,000 mm - Cutting accuracy: +/- 0.5 mm - Weight: 4000 kg - Glass thickness (LSG): 2 x 3 mm to 2 x 8 mm - PVB film thickness: 0.38 mm to 3.8 mm - Connection values: 3 x 400 V / PE, 50 Hz | Power: 20 kW - Air pressure: 6 bar 2.2 Hegla LT 2034 (Transport table) - Function: Fixed station for intermediate transport - Dimensions: Length: 2,000 mm | Width: 3,400 mm - Working height: 3,400 mm - Weight: 800 kg - Maximum glass dimensions: 3,210 mm x 6,100 mm - Connection values: 3 x 400 V / PE, 50 Hz | Air pressure: 6 bar 2.3 Hegla LKTR 7034 (Transport and tilting table) - Function: Transport table with tilting function, integrated conveyor belts and air cushion system - Dimensions: Length: 7,000 mm | Width: 3,450 mm - Working height: 940 mm - Total weight: approx. 3,500 kg - Connection values: 400 V, 50 Hz | Power: 11 kW (according to layout drawing max. 17 kW / 45A) | Air pressure: 6 to 8 bar Total length of the core line: 13,640 mm - EcoLam area: 4,610 mm - LT area: 2,030 mm - LKTR area: 7,000 mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts Godpszxnmyjfx Ak Usug The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Gsdpfoz Aqlmsx Ak Usug Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and saw chuck Drive motor and gearbox Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: like new (used), functionality: fully functional, Year of construction: 2023, workpiece length (max.): 4,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DIMENSIONS OF LOG PACKAGES Log packages to be cut, maximum length: 4,200 mm Log packages to be cut, minimum length: 2,500 mm Log packages to be cut, maximum width: 1,200 mm Log packages to be cut, maximum height: 1,200 mm Log packages after cutting, maximum length: 4,000 mm Log packages after cutting, minimum length: 700 mm Remaining cuts (waste), maximum length: 300 mm MACHINE DETAILS MACHINE DATA Machine type: ES 121 SHK 4 m Guedpfxezwt T As Ak Ueg Year of manufacture: 2023 Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Saw chain, article number 10004788, length 1,900 mm Guide rail, article number 11003322, length 1,900 mm Operating manual, article number 50002270

Year of construction: 1986, condition: ready for operation (used), A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible. Gsdpfoxgudbsx Ak Ujug

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Gsdpfezp Sz Aex Ak Ueug Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: ready for operation (used), Fully Automatic Flatbed Die-Cutter, Non-Stop Feeder, Automatic Vacuum Plate, Double Sheet Cleaning Station, Turn Die Cutting Frame, (Batch Delivery) Non-Stop Delivery With Belt, Cutting Force 300 TON, Up to 4.500 Speed/H, Working With Corrugated Cardboard Of Thickness Max. 9mm, Min. 0,9mm, Gujdpfewly D Hjx Ak Uog Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories Bobst SPO 1575 EG 1980, fully rebuilted 2015, chain changed 2024.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 570602, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, controller model: Siemens Sinumerik 840 C, swivel angle A-axis (min.): -170 °, swivel angle A-axis (max.): 170 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gujdpjzwmx Esfx Ak Ueg Travel range, X-axis: 300 mm Travel range, Y-axis: 400 mm A-axis: -170° to +170° X-axis speed: 0.1–5,000 mm/s Y-axis speed: 0.1–5,000 mm/s Workpiece diameter with 1:10 reduction ratio: 300 mm Workpiece diameter with 1:1 reduction ratio: 212 mm Maximum number of teeth: 200 Minimum number of teeth: 6 MACHINE DETAILS Control system: Siemens Sinumerik 840 C Total power requirement: 38 kW Dimensions & Weight Space requirement: approx. 4,200 × 2,200 × 2,100 mm Machine weight: approx. 10,000 kg

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Gusdpjp H Swdjfx Ak Usg Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 110502, input voltage: 230 V, metric thread diameter (max.): 63 mm, metric thread diameter (min.): 16 mm, Albert Roller Threading Machine 380011 Identical to REMS Magnum Gujdpfx Akez Ah R Ho Ueg Compact, high-performance machine for threading, cutting, deburring, nipple cutting, and rolling grooves. For installation work, metalworking, and industrial applications. Pipe threads from 1/2" to 4" Metric threads from 16 mm to 63 mm Includes 1x universal automatic cutting head 1/16" - 2" and 1x universal automatic cutting head 1/2" - 4" each with 6 cutting dies The cutting dies (1/2" - 4") are used but in very good condition. The cutting dies (1/16" - 2") have been renewed during inspection. Includes 2 x 5-liter cans of Roller's Rubinol 2000 cutting oil. The machine can be inspected and tested at our location in 09120 Chemnitz.

Year of construction: 1984, condition: refurbished (used), functionality: fully functional, drive type: V-snaren, Motor: 55 kW - 1500 RPM Tread die: 85 mm Die diameter: 362 mm Equipped with a cut-off knife on the door Weight: 1440 kg Guodpfsz Arh Nsx Ak Ueg 1 year warranty

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included Guedpozbub Defx Ak Ueg • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Flatbed executed as steel/welded construction, fixed-mounted, low design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics Gjdpfx Asx A Npdjk Ujug F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Gjdpfx Aezqhxmsk Uoug Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, safety light barrier, skyCUBE XLs class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XLs class, produced by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting tasks. It combines advanced productivity with economic efficiency and precision. The machine housing is manufactured from welded and bolted steel construction, specifically designed for industrial and commercial applications. The drive system developed by PFEIFER technology ensures both precision and high repeat accuracy. Gusdpfx Aksw Ebzmo Ujg skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, providing you with maximum safety. The ergonomic design with a pull-out worktable facilitates easy loading of the machine. Drawers in the lower section collect cutting residues efficiently. The skyCUBE laser software with file import capability generates precise laser cutting geometries for your requirements. Optimize your cutting quality and speed—even with thick materials—thanks to the 6kW laser power, including when using compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Monitor your production with ease: the large front doors allow convenient access to the entire working area. Position the operator console wherever you prefer. It is mobile, providing optimal visibility of the cutting process at all times. Naturally, your safety is the highest priority when operating the skyCUBE laser! The skyCUBE XLs is a Class 1 laser system. There is no risk of coming into contact with laser beam emissions or reflections during operation. With all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass panels and a perfectly shielded cutting area reliably protect you from laser radiation risks, while an independent safety system enables loading without interrupting production. Select the laser power that best suits your requirements; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a factory-new laser machine from our own production) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine: 4.0 T Power supply: depends on laser source (6kW), 400V/50Hz, 3-phase / 27kW Process gas control for: oxygen / nitrogen / compressed air according to material and process

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) Guedpewgc I Rsfx Ak Ueg • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: C3030, type of input current: three-phase, total width: 1,900 mm, total length: 4,200 mm, input voltage: 400 V, input current: 50 A, feed length X-axis: 1,700 mm, feed length Y-axis: 1,700 mm, feed length Z-axis: 300 mm, working width: 1,700 mm, total height: 850 mm, repeat accuracy: 0.1 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 1 m/min, cutting width (max.): 1,700 mm, cutting height (max.): 80 mm, compressed air connection: 6 bar, Complete Textile Cutting & Spreading Equipment Line – KURIS, ZSK & MAYER – Automatic Cutter, Spreading Machines, Presses Professional textile production equipment available for sale, including automatic cutting systems, spreading machines, embroidery equipment, industrial presses, and accessories. All machines were used in industrial garment production and are available for inspection. Also available more than 200 sewing,ironing machines (Juki, Durkop Adler, Veit) Contact for more info. Location: Ruse, Bulgaria Delivery terms: EXW (Incoterms 2020) All prices are net prices (excluding VAT, dismantling, loading, and transport). Cutting Equipment 1 × KURIS C3030 Automatic Cutter KURIS automatic CNC textile cutting system. Like new condtion always serviced with original parts installed October 2019 Main Specifications Working width: 1700 mm Cutting height: up to 80 mm Automatic servo cutting system Vacuum table Industrial CNC control Suitable for textile and technical fabrics Set Price: EUR 45,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter KURIS band knife machine Set Price: EUR 9,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 8,000 Godpjy Tp Sijfx Ak Ueug Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Spreading Tables: 1 × 10-meter spreading table Price: EUR 500 1 × 8-meter spreading table Price: EUR 500 Plaid Fabric Cutting Table with Awl Special table for precise plaid/check fabric alignment and cutting. Price: EUR 2,500 Embroidery Equipment 1 × ZSK 10-Head Embroidery Machine Industrial multi-head embroidery machine by ZSK. Price: EUR 5,000 Pressing Equipment 1 × MAYER RPS-M 1000 Press Mayer industrial pressing machine. Price: EUR 8,000 1 × MAYER AHV-BM 1370 Press Price: EUR 4,000 1 × MAYER APM-1150 Press Price:EUR 4,000 Additional Information feel free to contact me (Viber,Whatsapp) Machines can be inspected under power Professional dismantling available upon agreement Loading assistance available Transport can be arranged separately Suitable for garment factories, textile manufacturers, upholstery production, and industrial textile processing All prices are net prices (excluding VAT, dismantling, loading, and transport) Contact: G. Jordanov Location: Ruse,Bulgaria