Used Flail Mower Quad for sale (248)

Year of construction: 2026, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure can be adjusted from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optional up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blower gun inside • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Top-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with support from gas springs • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: Fpodpfef A D Nmsx Ak Ujl • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Bar loading warehouse Maximum bar length that can be loaded: 7500 mm Bar positioning unit Trolley travel speed: 0-60 m/min Milling unit: 4 electric spindles, 4.5 kW each Tool shank: ISO 25 X-axis travel: 240 mm Y-axis travel: 350 mm Z-axis travel: 350 mm Fsdpsy Tqabsfx Ak Uspl Cutting unit with pneumatic positioning Blade diameter: 550 mm Cutting angles: 45° – 90° – 135° Automatic discharge

Year of construction: 2008, condition: excellent (used), functionality: fully functional, - Bar loading warehouse Maximum length of bars that can be loaded: 7500 mm - Bar positioning unit Carriage traverse speed: 0-60 m/min. - Milling unit with 4 electric spindles, 4.5 kW each Tool holder cone: ISO 25 X-axis travel: 240 mm Y-axis travel: 350 mm Z-axis travel: 350 mm - Cutting unit with pneumatic positioning Blade diameter: 550 mm Cutting angles: 45° - 90° - 135° - Automatic unloading Fedpfx Akjy S E H He Uspl

Year of construction: 2000, condition: used, TIG welding machine, DC, 380 volts, for stainless steel. Fjdegt Auuopfx Ak Uopl Arkoquad 220, 40% duty cycle at 220 amps, 10% duty cycle at 140 amps, with torch. Ground cable, pressure reducer, water cooling.

Condition: excellent (used), 362 USED Kemper Quadro Ciabatta Line for square rolls. TECHNICAL DATA: - Dividing weight: 35-1000 g. EQUIPMENT: - Divider - Double-sided grain sprinkling (2 stations: top and bottom) - Stacking onto 60x80 and 60x100 baking trays, stacking onto batchers. Fpedpfx Asyxz T Ajk Usl The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: new, Year of construction: 2025, Spare parts for Scm edgebanding, squaring and edgebanding machines. Fpodpfxsfiv Tne Ak Ujl GLUE TANKS AND COMPONENTS - NEW OR REVISED, BUSHES GLUE SPREADER ROLLERS, NEEDLE ROLLERS AND RUBBER ROLLERS, RESISTANCE AND PROBES, WHEELED WHEELS, PLATES AND CHAIN LINKS, CHAIN PINS, BELTS PRESS, CARDAN JOINTS, MOTORS, COMPLETE GROUPS

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, The auction consists of: CEFLA FEV E Dryer: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW CEFLA Cooling Zone: AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU CEFLA TR 3000 Roller Conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW Note: The paint booth visible in the video is not included in the scope of delivery or sale. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT Fjdoyg Eynepfx Ak Uopl VS spark-proof supply/recirculation fan CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan Cooling Zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Pass-through working height: 80 mm Maximum tunnel height: 1,780 mm (excluding conveyor) Maximum air knife outlet speed: 32.5 m/s Fan power (supply/recirculation): 3 kW Fan power (exhaust): 1.5 kW Air throughput (supply/recirculation fan): 6,000 m³/h Air throughput (exhaust fan): 6,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 bar conveyor with double chain, steel guides, and chrome-plated bars CEFLA TR 3000 Roller Conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Condition: new, Pressure pipe to bridge a road without hindering traffic. Ideal during drag hose fertilization or water and sludge transport. Fedpfx Ajykcd Sek Uspl Status: New

Condition: used, Year of construction: 2023, Tandem axle Air brake PTO shaft 20-piece / Varioterminal 9-inch bale chute / / Fedpfx Akotlrnaj Uepl

Condition: used, Year of construction: 2024, Manual depth adjustment Telescopic drawbar Cat III/IV Coulter set HM point + / guide plate Air brake 40km/h Tined harrow DSTS roller Lighting / Fpedpfx Ajtpgtpjk Uel

Condition: like new (used), Year of construction: 2022, Helium leak detector Fedpfx Ajt Urlrjk Ujpl Manufacturer: Leybold Type: Phoenix Quadro EU Condition: As good as new Ready for use from 2022 unused Connection: 230V Delivery time: ex stock (u.ü.V.)

Year of construction: 2025, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1 to 80 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blow gun inside the chamber Fpjdpfsf A Nqqox Ak Uol • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring support • Door opening monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Internal lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • External mini pneumatic oil separator

Condition: used, Year of construction: 2024, Equipment: compressed air brake, Chassis Quadro 300-570 manual Depth adjustment Telescopic drawbar Cat III/IV / coulter set HM sprayer+guide plate Coulter set Wing coulter flat Air brake / 40km/h Following harrow DSTS roller Lighting / Fpedpfx Ast Tdv Hsk Ujl

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Edge Banding Machine Fjdpfov T R Erjx Ak Uspl Manufacturer: IMA Type: Quadromat 3512 U Year of 1999 Edge material: veneer rolls and strips, plastic, solid wood strips Edge height: 14-50 mm Edge thickness: 0.4-12 mm Speed: 18,000 rpm Cutting unit Milling units Profile scrapers Buffing unit Flat scrapers

Condition: good (used), Quadruple steel holder Steel height: 60 mm Fodpfxjdcwzus Ak Ujpl Dimensions: L. 190 x W. 185 mm

Condition: reconditioned (used), Year of construction: 2006, High-speed planing machine. Recently underwent a full maintenance service. Model: Hydromat 5000 Year of manufacture: 2006 Fodpfx Akjh Txd Is Uopl Serial number: 36650-280 Feed rate: 6-200 m/min. Electric motor: 30 kW. Processing width: 400 mm. Processing height: 150 mm. Spindle arrangement: 1) Bottom: 37 kW 2) Top: 45 kW 3) Right: 30 kW 4) Left: 30 kW Automatic table lubrication. All heads included. Spindle diameter: 50 mm.

Condition: used, Demonstration machine Standard equipment: Solid machine frame Long feed table Optimal price/performance ratio Noise protection hood Digital display of width and height settings Technical data: Planing width (finished size) min./max. 18 - 180 mm Planing height (finished size) min./max. 7 -120 mm Min. workpiece length (individual workpiece) 430 mm With group feed 250 mm Number of work spindles 4 Tool diameter of the 1st spindle 120 mm Tool diameter of spindle 2,3,4 min/max 100 mm/180 mm Feed table length 1700 mm Max. chip removal 10 mm Knife shaft speed 6000 rpm Spindle diameter 40 mm Planer head diameter 120 mm Jointing cutter diameter min./max. 120/137 mm Clamping length of vertical spindles 130 mm Clamping length of horizontal spindles 190 mm Feed speeds 6/12 m/min Feed roller diameter 120 mm Feed motor power 0.8/1.1 Kw Horizontal spindle motor power 5.5 Kw + 5.5 Kw Vertical spindle motor power 7.5 Kw Total motor output at 100% duty cycle 20 Kw Suction nozzle diameter 120 mm Fpsdpfxjvrvvtj Ak Uel Minimum speed of the suction air 20 m/s Minimum volume of the suction 3200 m³/h Weight approx. 1300 kg Dimensions LxWxH 2950 x 1180 x 1510 mm Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Quadra Check 100 two-axis display Fedjxlz Svepfx Ak Uepl Manufacturer: Heidenhain with Werth cross table Travel 50 mm

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2009, Additional features: * Parking feet * Drive via front PTO shaft * Electronic proportional control * Front-mounted mower * Mounting plate, size 3 * Max. reach from the center of the vehicle to the center of the mower head approx. 6.00 m * Mower head MK 1200, working width 1.20 m, heavy-duty flails approx. 80% * Operates to the left and right Fpsdpfxozz Np Ij Ak Uel Other: * Trade-in and purchase of vehicles and machinery possible. * Sale price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: used, mileage: 999 km, power: 10 kW (13.60 HP), first registration: 01/1977, fuel type: diesel, overall weight: 500 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, suspension: other, number of seats: 1, operating hours: 999 h, Equipment: all wheel drive, Engine: 3-cylinder Kubota diesel engine, rear PTO, rear-mounted flail mower, model JAM95-T, year of manufacture 2021, front weights, roll-over protection system (ROPS). The vehicle does not have an hour meter; therefore, the operating hours are estimated. This is a non-binding offer; subject to changes and prior sale. Sale is made excluding any warranty. All information is provided without guarantee! Fpjdpfezzvwxsx Ak Uel

Condition: used, Year of construction: 2025, operating hours: 12 h, Radio-controlled implement carrier with forestry mulcher The Energreen RoboEVO is a radio-controlled implement carrier designed for operation in particularly challenging and hard-to-access terrain with inclines up to 55°. It is equipped with a powerful 40-hp diesel engine and two double-acting hydraulic controllers, enabling the use of a variety of attachments. * 150 m radio control range * Optimal maneuverability * Traction in all directions up to 55° * Special oil pan for secure engine lubrication * Multifunctional operation * High performance, fast work completion * Maximum traction on any surface Special equipment: * Hydraulic quick couplings “CEJN” * Dual band EU radio remote control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color: Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights, total 70 kg * 2 LED work lights * LED rotating beacon, 12V, with bayonet mount * Hydraulic winch preparation Attachment: Forestry mulcher Forestry Head 130H with hydraulic quick couplings “CEJN”, rotor with hammer flails and material guide frame Robust, reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes, and reeds up to a diameter of 4 cm. Rotor with flails for shredding chopped material. TECHNICAL DATA Cutting width: 1200 mm Oil pressure: 290 bar Number of tools: 22 Oil flow rate: 55 l/min Hydraulic motor: 23 cm³ Fpjdpfx Aov R E Hfsk Usl Weight: 355 kg We also have other grass mulchers, forestry mulchers, brush cutter heads, as well as a stump grinder in stock. Additional attachments such as double blade mowers, reach mowers, and many other implements available upon request! We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new equipment in stock, with additional units available for demonstration. Contact us! All machines are also available for rent, with or without operator. Other notes: * Trade-in and purchase of vehicles and machinery possible. * Sale price exclusive of transport. * No liability for printing or typographical errors. * Errors, changes, and prior sale reserved. * Offer non-binding. * Photos may differ. Price applies to current condition. * All information supplied without guarantee. Additional information: Engine output: 41 hp (30 kW)

Condition: used, Year of construction: 2022, operating hours: 359 h, Radio-controlled tool carrier with grass mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier that can also be used on particularly challenging and hard-to-reach terrains with inclines of up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections, ensuring compatibility with a variety of attachments. Features: * 150 m radio control range * Optimal maneuverability * Ground adherence in all directions up to 55° * Special oil sump for secure engine lubrication * Multifunctional application * High performance, fast completion of work * Excellent traction on any surface Optional equipment: * Hydraulic quick couplings "CEJN" * EU DUAL BAND radio control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator protection * Counterweights, approx. 70 kg * 12 Volt LED beacon with bayonet lock Attachment: Energreen Head 130 with hydraulic quick couplers "CEJN" and hammer flails Robust, reliable mulcher made from Strenx® steel, ideal for cutting grass and shrubs up to 3 cm in diameter. Rotor with hammer flails, adjustable cutting height. Technical data: Working width: 1300 mm Oil pressure: 290 bar Number of tools: 22 Oil flow: 52 l/min Fpsdpfx Akjzviypo Uol Hydraulic motor: 21 cm3 Weight: 220 kg We also have other grass mulchers, forestry mulchers, brush cutters, and a stump grinder in stock. Additional attachments such as double-blade mowers, boom mowers, and many other implements are available on request! We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new machines in stock, as well as additional units for demonstration purposes. Contact us! We also rent out all machines with or without operator. Other information: * Trade-in and purchase of vehicles and machinery possible. * Sale price excludes transport. * No liability for printing and typographical errors. * Subject to error, change, and prior sale. * Non-binding offer. * Photos may differ. Price applies to current condition. * All information without guarantee.

Condition: used, Year of construction: 2021, We are offering a used Mulag combination mowing unit MKM 700, manufactured in 2021, consisting of: flail mower head MK 1200 Plus, verge mower MRK 300, and verge mower head RMK 1200. Without rear weight. Further details are available upon request. Location: 95326 Kulmbach. Fsdpfx Aezkdvbsk Uopl

Condition: used, Year of construction: 2007, power: 1 kW (1.36 HP), gearing type: other, first registration: 09/2007, overall weight: 550 kg, mileage: 1 km, empty load weight: 500 kg, maximum load weight: 50 kg, axle configuration: 4x4, number of seats: 1, driver cabin: other, brakes: other, emission class: none, Equipment: all wheel drive, * Dücker verge mower RSM13/2 * Mowing width 1.30 meters * Mowing head inclination from center position 30° * Cutting system: Flail shaft * Transport width: 2.40 meters * Working speed up to 8 km/h * Max. forward delivery: 3.20 meters * Max. outreach from the center of the vehicle 3.60 meters * Year of construction: 2007 If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - . Fpjdpfjxawy Ejx Ak Usl

Condition: used, mileage: 29,002 km, power: 74 kW (100.61 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 2,600 kg, maximum load weight: 2,400 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,802 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 29.002 Km * Only 5,802 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F30CY023 * Lifts to 1.85m = 995 Kg - 3.00m = 810 Kg - 4.10m = 580 Kg - 5.20m = 440 Kg - 6.30m = 335 Kg * Hook height 9 m * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections Fsdpevhqu Njfx Ak Uopl * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .