Used Flail Mower Quad for sale (425)

Condition: used, mileage: 33,596 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x4, wheelbase: 2,500 mm, overall weight: 5,000 kg, empty load weight: 2,700 kg, maximum load weight: 2,300 kg, first registration: 10/2011, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, emission class: euro5, color: green, driver cabin: other, brakes: other, number of seats: 2, operating hours: 5,333 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos Dedpfx Abjvhqhis Towf * Original only 33,596 Km * Only 5333 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F28B.22 * 1,85m = 995 Kg - 3,10m = 765 Kg - 4,30m = 545 Kg- 5,50m = 395 Kg * Hook height 8 m * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,700 kg * Payload: 2,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 92,783 km, power: 100 kW (135.96 HP), first registration: 05/1999, overall weight: 7,490 kg, fuel type: diesel, color: green, next inspection (TÜV): 01/2026, gearing type: mechanical, emission class: euro2, loading space volume: 2 m³, loading space width: 1,890 mm, loading space length: 1,950 mm, loading space height: 400 mm, total length: 4,390 mm, total width: 2,300 mm, total height: 3,050 mm, number of seats: 2, Equipment: all wheel drive, Mercedes-Benz Unimog Winter Service Vehicle with snow plow, flatbed (dimensions: 1950x1890x400 mm), single-circuit hydraulic system, rear dual hydraulic couplers (ZELLE 1), front quadruple hydraulic couplers (ZELLE 1 and 2), mounting brackets at the rear and center, gearbox power take-off with 4-bolt flange, cab roof raised by 120 mm, sound and thermal insulation for the cab, high-mounted exhaust, ABS trailer socket 24V 7-pin / 5-pin, trailer socket 12V 13-pin, left-side bracket for beacon, headlamp leveling system, vehicle may feature advertising stickers and/or decals. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops! Vehicle may feature advertising stickers and/or decals. Our general terms and conditions of delivery and payment apply. Dodpfxsxa Tice Ab Tewf We are happy to provide you with a financing or leasing quote for this unit. Please contact us!

Year of construction: 2020, condition: new, T-Shape 3-in-1 Multi-System // Built in 2020 T-Shape combines three powerful technologies that work simultaneously to promote collagen production and significantly reduce localized fat volume and skin elasticity. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness. - Skin tightening - Cellulite reduction - Fat deposit reduction - Circumference reduction - Post-liposuction treatment - Facelift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar, and hexapolar radiofrequency signal. Heat is generated by the contact of RF (radiofrequency) energy with tissue impedance. When properly heated, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, and the skin appears firmer, more compact, and younger. Vacuum Suction T-Shape features vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and favors vasodilation. LLLT Laser Because the LLLT laser irradiates adipose tissue, it contributes to the formation of temporary micropores in fat cells and accelerates the fragmentation of triglycerides into glycerol and fatty acids, allowing them to escape from the cell, which in turn has a smaller volume. The released lipids are excreted through normal metabolic processes. LLLT effectively reduces body circumference through targeted application to the treated areas and has also been shown to reduce edema. Technical Specifications Supply voltage: 220/230 Vac 50/60 Hz Power consumption: 1300 W Weight: 45 kg Dimensions: 348 x 513 x 1008 mm Low-power laser wavelength: 760 nm Laser class: 3 R Laser density: 8 MW/cm² Dedpfx Ajrxri Ssb Tewf Bipolar radio frequency signal frequency: 1500 kHz (1.5 MHz) Maximum RF power: Less than 25 W Stimulated suction pressure: Less than 80 kPa (0.8 bar) Item condition: Used, good condition Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Applicable material: Hay Djdpfox A Ak Uex Ab Tewf Working width: 135 cm Mower type: rotary

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length Dwjdpfeqrqvhjx Ab Tef - One M42 bi-metal saw blade - One set of tools and one toolbox

Condition: used, Year of construction: 2015, John Deere Gator HPX Bj 2015 Hourly rate 1200 Dwsdexz Ukqepfx Ab Tef Diesel

Condition: used, mileage: 78,198 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, wheelbase: 2,700 mm, overall weight: 6,000 kg, empty load weight: 3,405 kg, maximum load weight: 2,595 kg, first registration: 09/2012, loading space length: 1,700 mm, loading space width: 1,650 mm, loading space height: 800 mm, emission class: euro5, driver cabin: other, brakes: engine braking, number of seats: 2, Equipment: additional headlights, air conditioning, all wheel drive, cabin, crane, differential lock, trailer coupling, * German vehicle * 1st hand * See photos for condition * Complete documentation incl. test books and checkbooks available * Only 2,933 operating hours * Three-way tipper with crane behind the driver's cab * Palfinger crane * Type PK 3400 A * Hook height 9m * 5th + 6th control circuit * Grapple control * 2 hydraulic extensions * 2 hydraulic outriggers * 6.40 m = 430 kg. * 4.90 m = 600 kg. * 3.40 m = 870 kg. * Load capacity 990 kg. * Municipal plate with all hydraulic connections * Working plate suitable for various attachments Dwedpfx Abevhp Tke Tof * Various attachments available at extra cost * for example snow blade/ flail mower/ Mulag or Fiedler front boom etc. * Three-way tipper * Tipper length 1.70 m x 1.65 m * Tail lift elevation 0.80 m * DIN lashing eyes * High front wall * Trailer coupling * 3,500 kg towing capacity * Various storage compartments * Cab with air conditioning * Auxiliary heating * 2 air-sprung comfort seats * Heated seats * 5-speed gearbox * Diff locks * Rotating beacons * Wheelbase 2.70 m * GVW. 6,000 kg. * Unladen weight 2,405 kg. * Payload 2,595 kg. If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Dwedpfx Abscnxrcj Tsf Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm Dwodpfx Abeu Ix Hds Tof centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Dedpjxx Tigofx Ab Tswf Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: like new (used), Year of construction: 2019, Type: QV AKTIVE 202 Model: QV-L202Z1L-D Range (X, Y, Z axis) with Vision Head: 250 x 200 x 150 mm Max. table load: 10 kg Resolution: 0.1 μm Illumination: (White LED) Dwsdpfxoxztgke Ab Tof • Contour • Coaxial • 4-quadrant ring light Magnification system: Zoom optical system with 8 positions, standard 1.5X magnification lens Sensor type: High-resolution CMOS color camera Additional lenses: 1X and 2X magnification Accuracy: E1 (x, y) = (2+0.3 L/100) μm E1(z) = (3+0.5 L/100) μm E2 (XY) = (2.5+0.4 L/100) μm L = measured length (mm)

Condition: excellent (used), Year of construction: 2011, operating hours: 18,800 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, table width: 1,150 mm, table length: 560 mm, table load: 700 kg, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,600 h, number of slots in tool magazine: 30, tool length: 250 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, POSmill C 1050 Vertical Machining Center, year of manufacture 2011, including Lehmann TF Vario X 510.520 4th/5th axis (see right) (without LANG clamp) Dwodpfxoxzhfnj Ab Tsf Equipped with M&H probing system / tool measurement with 1x POSfix 100mm vise (see left) with 1x quadruple clamping system (see center) Magazine with 30 tool positions, SK40 tool holder. Internal coolant supply, through-spindle air, chip conveyor, etc.... The machine is in very good condition, with very low hours (3600 spindle hours) and, in comparison, even fewer hours on the Lehmann 4th/5th axis. Viewing under power is welcome by prior arrangement, (almost) anytime. Single-operator use (the machine was exclusively operated by myself). The reason for sale is a private accident about two years ago. For further questions and for optional accessories regarding the machine or Lehmann 4th/5th axis, I am gladly at your disposal. Note: The LANG clamp and the tools in the magazine visible in the pictures are NOT included in the sale price and are shown for demonstration purposes only!

Condition: used, mileage: 33,596 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x4, wheelbase: 2,500 mm, overall weight: 5,000 kg, empty load weight: 2,700 kg, maximum load weight: 2,300 kg, first registration: 10/2011, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, emission class: euro5, color: green, driver cabin: other, brakes: other, number of seats: 2, operating hours: 5,333 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, German vehicle, first owner, LADOG T1400, condition as shown in photos, original mileage of only 33,596 km, only 5,333 operating hours. Three-way tipper with Fassi crane mounted behind the cab, Fassi crane model F28B.22, hook height 8 m. Lifting capacities: 1.85 m = 995 kg, 3.10 m = 765 kg, 4.30 m = 545 kg, 5.50 m = 395 kg. Equipped with 5th and 6th hydraulic control circuits, 2 hydraulic outriggers, height-adjustable municipal work platform with hydraulic connections, four-wheel steering, EasyDrive (hydrostatic drive), 2 trailer hitches, trailer load 3,500 kg. Tipper dimensions: length = 2,100 mm, width = 1,400 mm, height = 300 mm. Aluminum side panels, Dücker UNA 200 flail mower available at extra cost, high bulkhead, power steering, differential lock, 2 comfort seats, roof hatch, rear window, sliding window, municipal lighting and headlights, beacons. Wheelbase: 2,500 mm, gross vehicle weight: 5,000 kg, unladen weight: 2,700 kg, payload: 2,300 kg. If a new TÜV inspection is desired, we would be happy to provide you with an offer via our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new safety inspection (SP), without new accident prevention inspection (UVV). You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend a viewing and inspection of the equipment to avoid any misunderstandings regarding the condition and suitability of the item. Inspections and viewings are possible and expressly desired at any time by appointment. Djdpfx Asvhqhpjb Tswf All information provided without liability. No responsibility is taken for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and features of the vehicle/equipment. Subject to change, prior sale, and errors.

Condition: used, This listing is for 1 of 2 Thermo Scientific Sorvall RC12BP+ Floor Centrifuge Sorvall RC 12BP Plus Centrifuge System specifications: Centrifuge Specifications Maximum speed: 4,700 rpm Maximum RCF: 7,340 xg Maximum capacity: 12 L, 6 x 2000 mL Nalgene Bio-bottles, 12-500 mL quad blood bags Drive: High-performance induction Imbalance detector: 50 gram tolerance Accel/decel profiles: 11 Run time: 1 min. - 99 min 59 sec., continuous operation Temperature control range: -10 to +40 °C Dimensions (H x W x D): 1178 x 800 x 905 mm (46.3 x 31.5 x 35.6 in) Weight 470 kg (1,036 lbs) Control: Microprocessor Programmability: 15 programs Functions: Centri-Log traceability software, ACE, Step-mode runs, slow start/stop Safety features: Automatic lid lock, imbalance detection, armored guard ring, security key switch Dedpfxexzgr Tj Ab Tswf

Condition: used, mileage: 45,800 km, first registration: 09/2012, overall weight: 11,900 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, compressor, crane, soot filter, Unimog U 400 two-way with crane Manual gearbox Hydrostat Two-way equipment with wagon brake system 400 tons Acceptance : EBO Speed: Shunting 25 km/h Travel speed 50 Km/h rail Rear crane Atlas with grab control Radio remote control crane Workman basket / acc. to EBO Lighting EBO Dücker front mower with flail mower head and branch saw Dwedei R Ahxjpfx Ab Tsf Rental

Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Dodpfexx Sdpjx Ab Tswf Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Extended radio remote control with foot switch “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement

Condition: used, power: 25 kW (33.99 HP), Year of construction: 2014, operating hours: 4,640 h, Equipment: air conditioning, all wheel drive, cabin, front linkage, Kubota F3680 front-mounted large-area mower with all-wheel drive, cab, and air conditioning ----* Powerful 25 kW / 34 HP 4-cylinder diesel engine, 1,498 cc * Hydrostatic 4x4 all-wheel drive with lock * 2 gears (slow - fast) * Power steering, rear axle * Adjustable, suspended driver's seat * Approx. 4,640 operating hours * Weight: approx. 400 kg * 61-liter diesel tank * Rotary mulching mower with a cutting width of 1,500 mm (3 blades) - hydraulically liftable and pivotable 90 degrees backward (service position) * PTO drive for mower * Also available with a new snow blower * Tires, front and rear, approx. 60% * Length: approx. 2,500 x width: 1,500 x height: 2,300 mm * Transport / Shipping possible ----Used municipally owned machine in ready-to-use condition, available for testing on-site. Well-maintained, very clean condition! ----Your contact for this vehicle: Dwodpfx Abjwklnno Tjf Daniel Seidler Tel: Mobile: also WhatsApp Email: ----Errors and changes excepted!

Condition: used, mileage: 29,002 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x4, wheelbase: 2,500 mm, overall weight: 5,000 kg, empty load weight: 2 kg, maximum load weight: 2,400 kg, first registration: 03/2015, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, emission class: euro5, color: green, driver cabin: other, brakes: other, number of seats: 2, operating hours: 5,802 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 29.002 Km * Only 5,802 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F30CY023 * Lifts to 1.85m = 995 Kg - 3.00m = 810 Kg - 4.10m = 580 Kg - 5.20m = 440 Kg - 6.30m = 335 Kg * Hook height 9 m * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock Dsdpfx Abjvhqu Aj Tswf * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 3,890 km, power: 230 kW (312.71 HP), first registration: 05/2020, overall weight: 11,900 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, compressor, crane, soot filter, Unimog with crane and optional front mower Orign. 3,900 km As good as new Unimog U 423 . 2020 Crane MKG 230 Front attachment plate Tipping ram Torsion frame Dual-circuit hydraulics Dodpfxoi R Aikj Ab Tewf Camera system Crane MKG Grabber and rotary servo control Cable winch on the crane Aerial work basket Acceptance according to the latest guidelines Option: Dücker UNA 500 Pruning shears Mulcher

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Dwedpfexx Rvksx Ab Tjf Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), fuel type: diesel, gearing type: other, axle configuration: 4x2, overall weight: 500 kg, empty load weight: 499 kg, maximum load weight: 1 kg, first registration: 06/2008, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Year of construction: 2008, Dücker UNA 200 boom, Including Dücker MKL 10 flail mower, The basic implement is used to hold various implements, Ideal for municipal vehicles such as Multicar-Hansa-Ladog-Boki with corresponding municipal plate, Reach 3.40 meters, Transport width: 1.65 meters, Weight: 500 kg, Displacement of 1.15 meters, The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive, Swivel angle implement 140°. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Dsdpjw U Afwjfx Ab Tswf All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Year of construction: 2024, operating hours: 630 h, functionality: fully functional, Basic package AK565 Plus: MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tires: 435/50 R 19.5 Hydraulically adjustable support leg Splash guards (internal and side fenders) Permissible total weight: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust air directed upwards Load-dependent material feed control incl. automatic reversing of the scraper floor Fuel tank: 600 liters Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: "Streusel plus" flail tip Dsdpfexx R Akox Ab Tewf Impact plate with teeth Centrally positioned lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support leg and opening/closing rear hood, folding in/out discharge conveyor, releasing drive) when engine is off 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Separate drive for feed roller / scraper floor - "Twin Drive" Rear discharge conveyor with anti-magnetic center piece - belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – height adjustable Underbelt - belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Drive system preparation Reinforcement plates for the intake hopper (material: Hardox), both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic drive system Additional hydraulic connection 20 l/min "Bear Paw" flail tips Impact plate with strike bar and tooth row Neodymium magnetic roller incl. chute NEODYM overband magnet for rear discharge conveyor Frame for overband magnet Moistening system LED lighting package: engine compartment and rear discharge conveyor Delivery date by arrangement

Condition: used, mileage: 29,002 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x4, wheelbase: 2,500 mm, overall weight: 5,000 kg, empty load weight: 2,600 kg, maximum load weight: 2,400 kg, first registration: 03/2015, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, emission class: euro5, color: green, driver cabin: other, brakes: other, number of seats: 2, operating hours: 5,802 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 29.002 Km * Only 5,802 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F30CY023 * Lifts to 1.85m = 995 Kg - 3.00m = 810 Kg - 4.10m = 580 Kg - 5.20m = 440 Kg - 6.30m = 335 Kg * Hook height 9 m * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Dwsdpfx Asvhqu Njb Tof We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) Dedsxx Rrrjpfx Ab Towf 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), fuel type: diesel, gearing type: other, axle configuration: 4x2, overall weight: 500 kg, empty load weight: 499 kg, maximum load weight: 1 kg, first registration: 06/2008, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Year of construction: 2008, Dücker UNA 200 boom, Including Dücker MKL 10 flail mower, The basic implement is used to hold various implements, Ideal for municipal vehicles such as Multicar-Hansa-Ladog-Boki with corresponding municipal plate, Reach 3.40 meters, Transport width: 1.65 meters, Weight: 500 kg, Displacement of 1.15 meters, The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive, Swivel angle implement 140°. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Dwedpfx Ajw U Afqob Tof We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .