Used Finishing Lathe for sale (8,381)

Condition: ready for operation (used), Year of construction: 1995, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. Bwodpsxtfx Aefx Acyew weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1981, faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW Bedpeu Sbdgofx Acyoww weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.

Condition: good (used), Year of construction: 2007, turning length: 600 mm, spindle bore: 33 mm, Distance between main spil and left turret 404 mm Distance between spil and sub spil nose minimum 260 mm Distance between spil and sub spil nose maximum 760 mm Max. turning Ø: 180mm X-Axis: 160mm Z-Axis: 210/600mm Spindle bore: 33mm Speedrange: 4000Rpm Spindle power: 7.5kW Subspindle speeds:4000Rpm Subspindle bore: 7.5mm Bwjdpfsxtb Nwjx Acysw Length: 3100mm Width: 1700mm Height: 1800mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, For sale is a fully functional CNC turning machine. Video: available on request via WhatsApp Details & equipment: The machine can be inspected Year of manufacture: 2000 Fusion 640 control system Bjdpfew D T Txjx Acyoww Chip conveyor will also be included in the delivery at a later stage Machine documentation available If interested or if you have any questions, please contact us.

Condition: used, Year of construction: 2001, functionality: fully functional, AVIA TURN 40 for sale. Year of manufacture: 2001 No warranty! Self-collection from location in Bochum Bwedpfx Asxr U Uqecyew Free loading onto truck (ex works)!

Condition: good (used), Originating from a school. Nice and complete with accessories. Details: Turning diameter: 300 mm Turning length: 430 mm Swing diameter over bed slide: 160 mm Turning diameter over bed slide (with T-slots): 135 mm Centre distance: 470 mm Centre height: 145 mm Bed width: 205 mm Number of spindle speeds: 18 Speed range: 30 - 3550 rpm Speed range: 15 - 3550 rpm Number of feeds: 90 Feed range: 0.02 - 2.0 mm/rev Workpiece weight in steadies (max.): 25 kg Workpiece weight without steadies (max.): 80 kg Machine weight approx.: 0.9 t Total power requirement: 3.5 kW Machine dimensions approx.: 1475 x 795 x 1300 mm Quill diameter: 40 mm Bjdpsw Ryhnefx Acyeww Quill stroke: 85 mm Control unit: Conventional

Condition: used, Year of construction: 2017, functionality: fully functional, turning length: 3,000 mm, turning diameter: 805 mm, Used CNC cycle lathe with C-axis, featuring the following specifications: Distance between centers: 3,000 mm Center height: 400 mm Swing diameter over bed: 805 mm Swing diameter over carriage: 720 mm Swing diameter over cross slide: 515 mm Cross travel: 400 mm Carriage length: 900 mm Cross slide length: 750 mm Bed width: 425 mm Spindle bore: 105 mm Spindle nose: A2-8/8 Spindle taper: MT 5 Speed range: 1st range: 0 – 425 rpm 2nd range: 425 – 1,700 rpm Feed rate: 0 – 7,000 mm/min Rapid traverse Z-axis: 10,000 mm/min Rapid traverse X-axis: 10,000 mm/min Ball screw Ø Z-axis: 50/10 mm Ball screw Ø X-axis: 32/5 mm Tailstock quill Ø: 106 mm Tailstock quill stroke: 215 mm Tailstock taper: MT 6 Number of tool stations: 12 Tool shank: 32 mm Boring bar: 50 mm Positioning accuracy: 0.01 mm Repeatability: 0.01 mm Motor power: 17 kW Pump motor: 0.57 kW Flow rate: 50 l/min Coolant tank capacity: 225 l Machine dimensions (LxWxH): 5557 x 2077 x 2227 mm Machine weight approx.: 6,460 kg Standard equipment: • CNC control, Fagor brand, model 8055 • Z/X-axis servomotors • Electronic handwheel for X and Z-axis • Servo spindle motor • Coolant system • Spindle sleeve and fixed centre MT 6 • Partial enclosure • Automatic shifting gearbox by Baruffaldi • Automatic lubrication system • Manual tailstock • Work light • Leveling bolts and nuts • Operating and programming manuals in German • CE version including CE Declaration of Conformity • For connection 400V, 50Hz, 3-phase Special equipment: • “C-axis”, continuous positioning • 1 piece 12-station disc turret, Baruffaldi brand, model TBHMA200-12, for live tools with VDI 40 mount • 2 pcs radial tool holders for live tools, VDI 40, type PRR-S-40-ER32/50-T • 1 pc axial tool holder for live tools, BMT65-A-ER32/50-T • 1 pc hydraulic chuck, Ø 400 mm, hydraulic cylinder Ø 92 mm, and hydraulic tailstock quill • Renishaw tool measurement system on the machine • 1 pc chip conveyor • 1 pc fixed steady rest for Ø 10–300 mm • 1 pc fixed steady rest for Ø 300–530 mm • 1 set soft jaws for Ø 400 mm chuck Bjdpexr U H Hjfx Acysww • 1 set hard jaws for Ø 400 mm chuck By the way, besides competitively priced new machines and inspected used machines, you can also expect more from us: • On-site consultation and solution finding • Organization of transport to your facility • Installation, commissioning, and handing over ready for operation • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service personnel also in your area, etc. • 24/7 telephone availability • Tax-optimized trade-in of your old machine • Favorable financing, even without down payment Enquire now! Image shows machine as a new version with 2000 mm center distance.

Year of construction: 1996, condition: used, functionality: fully functional, The reduction machine is a copy milling machine that is used to make tools by copying the representation from the prepared plastic model. It consists of three parts, the electrical cabinet, the basic part of the machine and the auxiliary part of the machine. Bwjdpfxev Uk Trs Acyow The reduction machine is a copy milling machine that is used to make tools by copying Dimensions (LxWxH): 1800x1500x700 mm 850 kg Year of manufacture: 1996 good condition

Condition: used, functionality: not functional, incl. some tool holders incl. live driven tool holder Bedpfx Acoxtbqnjyjww Full C-Axis 360.000 Chip conveyor Problem on Turret Revolver live tools Max. turning Ø: 430mm X-Axis: 230mm Z-Axis: 495mm Spindle bore: 50.8mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:5000Rpm Length: 3400mm Width: 1900mm Height: 2700mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2022, operating hours: 12 h, functionality: fully functional, machine/vehicle number: A320A/3798, Machine is purposed for orthopedic implant. Equipped with thread whirling tooling, enable very fast orthopedic / compression locking implant screw manufacturing. Bwedpew Il Nlefx Acyjw Condition is very prime, bought but never used for real production (only for research and development purposes), with around 12 hour TOTAL run-time only. Please note that the machine is NON - CE MARKED.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 1,630 mm, turning diameter: 500 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 430 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 1,474 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,000 mm, total length: 54,050 mm, total width: 28,880 mm, Equipment: documentation/manual, Okuma MacTurn 30 - 1500 OSP U100L CNC-Controller Number of axis - 5 +2 Swing over bed - Ø500mm Swing over carriage - Ø500mm Max dia. turning - Ø500 mm Max turning length - 1474 mm X axis Upper travel - 430 mm X axis Lower travel - 140 mm Z axis Upper travel - 1474 mm Z axis Lower travel - 1305 mm Y axis travel - 190 mm (+95/-95mm) W axis travel - 1305 mm C axis 360° (0.001 increment) Rapid travers Upper X-axis 20,000 mm/min Lower X-axis 15,000 mm/min Upper Z-axis 25,000 mm/min Lower Z-axis 20,000 mm/min Y -axis 12,000 mm/min C-axis 200 rpm Spindle nose - JIS A2-6 Main spindle speed - 45-4500 rpm Sub spindle speed - 45-4500 rpm Main spindle power - 15 kW Sub spindle power - 15 kW Main spindle diameter - Ø100 mm Sub spindle diameter - Ø100 mm Main spindle boring - Ø62 mm Sub spindle boring - Ø62 mm Rotary tool spindle - 6000rpm Rotary tool spindle - 6,8kW ATC Magazine - BT40 Tool storage capacity - 40 tool Bedpfx Asrdvhhscyoww Max tool dia. - Ø110 mm Max. tool lenght 300 mm Max. tool mass - 10 kg Chip conveyor type high Wight - 12100kg

Condition: used, Type F250 . Diameter: 250 mm . Bwsdpfx Acsxr Rdbjyjw Passage approx.: 61 mm

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min Bwedexr Rbyspfx Acysw power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Bedpfsxr Rbtex Acyjww Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Bwsdpfxextbf Eo Acysw Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2022, CNC Lathe Hyundai Wia SE2200MA Year of manufacture: 2022 FANUC i Series Smart Plus Touch C axis, driven tools Max. bar diameter: 51mm Max. turning diameter: Ø300mm Max. turning length: 309mm Chuck size: 170mm Max. travel (X/Z): 210/340mm Bjdpfx Acsxr H Ipsyoww BMT 45 turret - Tool probe - Parts catcher - Programmable tailstock - Documentation - Chip conveyor - 2 driven tool holders

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. Bsdjxr Diwspfx Acyoww For CNC lathe OKUMA&HOWA 2SP

Condition: like new (used), Year of construction: 1997, functionality: fully functional, center height: 150 mm, center width: 630 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,450 kg, Schaublin 150A Draai bank Specificatie Manufacturer Schaublin Type 150 Year of manufacture 1997 Besturing conv. Bedpfx Acswgd R Hjysww Max draaidiam. 340mm Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Multifix B plus 7pcs reedschaphouders 3 and 4 klauw Tegencenter Spantang set Koelmiddel inst. Heidenhain DRO (2-aces) Machine lamp Conusliniaal Fast chip installation Vaste en meelopende bril Enz.

Year of construction: 1970, condition: ready for operation (used), Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible. Bedpfx Acsxuitteyjww

Condition: good (used), Year of construction: 1976, Bed has been newly hand-scraped! Bwedpfsxr A D Tsx Acysw Swing over cross slide: 300 mm Spindle speed: 7 - 1,400 rpm Chuck diameter: 250 mm, 3-jaw scroll chuck Footprint: 2.9 x 1.4 x 1.5 m (L x W x H) Machine is in excellent condition, as it was only used intermittently by the previous owner, meaning it has low operating hours.

Condition: used, Manufacturer: HYUNDAI Model: KIT 450 Type : CNC Cnc : FANUC 0i- TB Max. Diameter allowed on bed : 530 mm Max. Turning diameter : 170 mm Maximum turning length: 190 mm Bar passage diameter : 45 mm X axis : 450 mm Z axis : 300 mm Spindle speed : 60-6000 rpm Table dimensions : 550 x 2200 mm Bsdpfx Acjxr A N Asysww Number of Slots : 3 Slots diameter : 14 mm

Condition: excellent (used), Year of construction: 2010, turning length: 230 mm, turning diameter: 230 mm, spindle speed (max.): 5,000 rpm, spindle bore: 68 mm, spindle nose: A2-6, Doosan TT1800SY Bwjdpfxowzxcaj Acyew

Condition: used, Year of construction: 2004, CNC-swiss type automatic lathe brand: STAR type: SB-16 new in: 2005 equipped with: FANUC 18i-TB control subspindle driven tools c-axis back working high pressure pump chip conveyor parts conveyor Bodpfexry R Djx Acyoww barloader FMB minimag 18

Condition: good (used), Year of construction: 2008, For sale is 1 Scherer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Bsdexr A Dtepfx Acyjww Diameter in the front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: good (used), Year of construction: 2004, For sale are 2 pieces of shearer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in front bearing: 85 mm Bwsdpfexr A Dgsx Acysw Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.