Used Feraboli Ff 50 for sale (95,623)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Tedpfov Stbmex Adnjf Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Todpfxjuiykde Adnjf

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Tsdpfx Aew D Dfxodnjf Further data: See PDF

Condition: refurbished (used), Refurbished. 1 year guarantee. Tsdpjrta Iqofx Adnof

Condition: ready for operation (used), Balluff Micropulse BTL06WT / BTL7-A110-M0500-B-S32 linear displacement sensor - HU, used, good condition, 100% functional, scope of delivery as per photos Tjdsmz Ectopfx Adnof

Condition: good (used), Automatic pendulum saw from Pfeiffer and APK. Cutting height 150 mm. Cutting width approx. 500 mm. Saw motor 5.5 kW. Electric adjustment. Pneumatic saw ejection. Travel distance approx. 2000 mm. Tjdow Icxwjpfx Adnjf

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Todpfxewgni Hj Adnjf Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Year of construction: 2005, condition: ready for operation (used), Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Tjdpfsuabq Tox Adnef

Condition: used, Year of construction: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Tjdpfx Asw Hwthednof

Year of construction: 2000, condition: good (used), Cieffe FNCm 2.5/0.8/1500 hardening furnace chamber furnace 1120 °C Manufacturer: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Tjdpfxonucguo Adnjf Series: 4185/1B Rated current: 70A 37 kVA 400 Volt Year: 2000 Maße: Außen (L x B x H) 3000 x 1480 x 1750 mm Brennkammer (L x B x H) 2600 x 270 x 100 mm Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 1995, with pneumatic lift for drilling on 2 levels used, excellent condition, low hours Manufacturer: Hoffmann Tedpfew Ed Ucex Adnef Model: HR 150 Year of manufacture: 1995 Machine no.: 15201 CE type tested Drill chuck: 16 mm Dowel drilling device with 1 piece indexing guide Workpiece stop Mitre gauge 45° Center stop Mobile Pneumatic lift Digital displays Pneumatic workpiece clamps, 2 pcs Space requirements approx. 1200 mm x 900 mm x 1300 mm Weight approx. 350 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without guarantee or warranty

Condition: excellent (used), Year of construction: 2011, operating hours: 28,000 h, functionality: fully functional, clamping force: 1,300 kN, For sale is a hybrid injection molding machine, 2 components, of the brand KraussMaffei and type KM 130-750 CX The machine is in very good condition, ready for immediate use, with low operating hours. Electronic injection unit and dosing unit, hydraulic clamping unit. Technical data: Year of construction: 2011 Tjdpsu Hxm Uefx Adnjf Operating hours: 28,000 h Clamping force: 130 T Cylinder Ø 30mm / 40 mm (& 2*50mm additional) Core pull: 1*Hydraulic Valve gate: Pneumatic Tie bar extension: 160 mm Internal pressure transducer Selector switch On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2010, condition: excellent (used), Krauss Maffei KM 180 - 750 AX injection molding machine Fully electric machine Year of manufacture -2010 Replaced new plastification system motor MC5 control system with color monitor, integrated control panel and built-in disk station. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Closing force of the mold: kN 1760 - Clamping plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Mold opening path max: mm 450 - Mold installation height min/max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: kN 49 Injection unit - Auger diameter: mm 50 - Ls/D ratio: 20,2 - Injection pressure: bar 1892 - Injection volume: cm3 393 - Injection weight for PS: g 357 - Injection capacity: cm3/s 314 - Screw speed, max: rpm 320 - Nozzle clamping force: kN 29,4 Electrical parameters - Connection value: kW 38 - Heater power: kW 15,6 - Number of cylinder heating zones: - 5 - Dry cycle time according to Euromap 6: 1/h 2000 - Dry cycle time according to Euromap 6: s 1.8 Weight and dimensions - Net weight with control cabinet: t 6.5 Todpfxon Atndj Adnof - Machine dimensions (L x W x H): m 6.07 x 1.92 x 2.01

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Tjdpfx Adjugmx Ajnef

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 504212, clamping force: 5,000 kN, screw diameter: 90 mm, clearance between the columns: 900 mm, injection pressure: 1,742 bar, installation height: 480 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Tie bar distance (h x v): 900 x 800 mm Maximum mold opening distance: 1,170 mm Minimum mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Todpew Dy Rwefx Adnsf Reverse ejector force: 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight (PS): 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump drive power: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current: 306 A Motor rated current: 170 A Operating voltage: 3 phases Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged upon request for an additional charge.

Condition: excellent (used), Year of construction: 2021, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 61033935, clamping force: 4,500 kN, Equipment: documentation/manual, Krauss Maffei LRX 250 Robot Tsdpfx Ajw Dcppjdnof Detailed specification in the attached file.

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: Tedpfx Adeddv Itenjf -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine Year of production - 2011 LRX 500 robot Z axis 4000 mm X axis 1500 mm Y axis 1250/1250 mm Hydraulic-mechanical two-plate closing system with 4 pressure cushions and 4 locking units on the moving plate. PV - injection unit regulation. MC 5 control system with color monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with screw diameter 135 mm, with check valve and open nozzle Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - dimensions of the mounting plate (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - pressure injection: bar 1389 - injection volume: cm3 8588 - injection weight for PS: g 6098 Tsdewqdyispfx Adnjf - injection efficiency: cm3/s 1414 Electro-hydraulic equipment - rated power of the pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of the place for installation (length x width x height): m 11.72 x 2.92 x 2.71

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Tjdpfew Hthzjx Adnsf

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Maximum mould opening force: 160 kN Moving platen force – opening: 86 kN Moving platen force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie-bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Maximum plasticizing rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Hydraulic oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Tedpfsw A N Hfsx Adnsf Accessories and additional equipment: - Oil tank - Anti-vibration pads - 3 × core pullers - 8 × hot runner control zones - 2 × air valves - Robot interface according to Euromap 67 Additional information: - Machine located in Poland - Immediately available - Loading, transport, installation, and commissioning can be organized

Year of construction: 2016, condition: ready for operation (used), Clamping force: 2500kN, injection unit: 1400CX, pump motor power: 45kW, plasticising system: HPS-UN, screw diameter: 60mm, injection volume: 820cm³, plasticising stroke: 82.4mm, tie bar spacing: 530mm. Machine dimensions X/Y/Z: approx. 6500mm/2100mm/2300mm, weight: approx. 15000kg, control: MC6, pump hours: 42115h, automatic hours: 39148h. Includes conveyor belt MK GUF-P 2000 AF. Documentation available. An on-site inspection is possible. Expected to be available from December 2025. Tedsw Exrpspfx Adnef

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 Tedpfx Adstrya Ronof - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: good (used), Year of construction: 1997, Krauss Maffei KM 650 - 3500 C2 injection molding machine Year of production - 1997 Fully hydraulic closing system. MC 3 control system SP 3500 plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 90 mm, with a non-return lock and an open nozzle. Closing system: complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a non-return lock and an open nozzle. TECHNICAL DATA: Closing unit: - Mold closing force: kN 6500 - Mold opening force: kN 346 - Mould mounting plate movement force -- opening kN 169 -- closing kN 144 - Mounting plate dimensions (h x v): mm 1490 x 1440 - Clearance between columns (h x v): mm 1000 x 930 - Mold opening stroke: mm 1150 - Minimum mold height: mm 600 - Opening width: mm 1750 - Ejector stroke: mm 250 Todpjvlpcgofx Adnjf - Ejector force: kN 226/285 Injection unit: - Screw diameter: mm 90 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Injection capacity cm3/s 649 - Increased injection capacity - Electric-hydraulic equipment: - Nominal power of the pump motor: kW 90 - Power of installed heaters: kW 44 - Number of cylinder heating zones: 7 - Oil tank capacity: l 1240 Dimensions and weight: - Net weight with control cabinet: t 39.5 - Machine dimensions (length x width x height): m 9.36 x 2.65 x 2.44

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot LRX 500 Year of production - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Tsdpfjwkhmmsx Adnof Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: good (used), Year of construction: 2006, Krauss Maffei injection molding machine KM 350 - 2700 C2 Year of construction : 2006 Control : MC 4 Technical details Clamping unit : Closing force : 3500 kN Mold opening force, max: 220 kN Moving force of moving plate Opening: 105 kN Moving force of moving plate Closing: 95 kN Size of mold plates (h x v): 1060 mm x 1095 mm Distance between columns (h x v): 710 mm x 710 mm Mold opening stroke: 920 mm Mold height min: 380 mm Max daylight: 1300 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejector force: 95 / 48 kN Injection unit Auger diameter: 80 mm Ls/D ratio: 20 Injection pressure: 1829 bar Displacement volume: 1433 ccm Injection weight, PS: 1304 g Injection speed: 513 ccm/s Screw speed: 218 1/min Tedpfxjmki Ius Adnjf Maximum plasticization rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump motor capacity: 75 kW Installed heating power: 36 kW Adjustable barrel heating zones: 7 Tank capacity: 720 ltr. Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total weight of the machine: 15300 kg Maximum mold weight: 4780 kg