Used Feraboli Ff 50 for sale (91,367)

Condition: good (used), Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 50-52 mm shaft -for gland tape -Number: 8x glands available -Price: per piece Iasdjdfglkopfx Ah Njl -Dimensions: 144/144/H68 mm -Weight: 2.9 kg

Condition: excellent (used), Year of construction: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner 10500kw, oil+gas. Year of manufacture 2013. Iaedovrkcnspfx Ah Nel

Condition: used, Vise jaw width 200 mm Jaw height 80 mm Plate: Width below 250 mm Less than 500 mm length Opening width 250 mm Iaedpfodd Tpiex Ah Nol Weight 72 kg

Condition: new, functionality: fully functional, Key Features & Specifications of Nissan Muffler (550x170x150mm) ✔️ Product Overview: The Nissan Muffler is an essential component of the exhaust system, designed to reduce noise, improve engine efficiency, and manage emissions. It ensures optimal vehicle performance by directing and filtering exhaust gases. ✔️ Key Specifications: Type: Exhaust Muffler / Silencer Compatible Vehicle: Nissan (specific model compatibility may vary) Iasdpev Ebh Isfx Ah Nel Dimensions: 550mm (Length) × 170mm (Width) × 150mm (Height) Material: Stainless Steel / Aluminized Steel (depends on variant) Weight: Approx. 4-6 kg (varies by design) Inlet/Outlet Diameter: Standard sizes, typically between 40-70mm (check model-specific details) Function: Reduces exhaust noise, directs emissions, and enhances engine efficiency Durability: Rust-resistant and corrosion-resistant for extended lifespan Installation: Direct-fit or universal fit (depends on variant) ✔️ Key Features: ✅ Noise Reduction – Designed with internal chambers and baffles to minimize engine noise ✅ Enhanced Performance – Optimizes backpressure for improved engine efficiency ✅ Durability & Corrosion Resistance – High-quality metal construction for long-lasting performance ✅ Efficient Emission Control – Helps in reducing harmful emissions from the exhaust gases ✅ Easy Installation – Direct-fit design for Nissan models or universal fitting options

Condition: new, 🧰 Product features Iedpsk Shvuefx Ah Neal • Condition: new • Colour: black • Volume: 43.7 l • Load capacity: 20 kg • Net weight: 1.2 kg • Length: 60 cm • Width: 40 cm • Height: 22 cm • Stackable: Yes • Dimensionally stable: Yes • 40 units per pallet 💰 Price: €15 net excl. VAT 💰 Price from 40 units: €12.90 net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide, on request • Delivery time: Immediately available • Inspection and collection: possible at any time by prior arrangement Over 5,000 linear metres of pallet racking from various manufacturers in stock at all times (Technical data, specifications and prices subject to change. Prior sale reserved. Please refer to our T&C. All prices ex warehouse excl. VAT.)

Year of construction: 2008, condition: excellent (used), Dual fuel burner Weishaupt RGL50/2-A -version ZM-NR Power 600-5400KW: Year:2008 Oil throughput 95-453kg/h Iaodpfx Ahef S A Sge Nel With existing fittings Dungs DN65 Shipping possible worldwide. Inspection please only after telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Year of construction: 2006, condition: excellent (used), Dual fuel burner Weishaupt GL7/1-D -Version: ZMD Power 300-1750KW: year of construction: 1992 Oil throughput 25-147 kg/h With existing fittings Dungs DN40 Мы говорим по русски! Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller is not liable for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible Iaedpfxof S A N Es Ah Nel

Condition: excellent (used), Hydraulic motor for Krauss Maffei injection molding machines. Iasdex Uqv Sopfx Ah Nsl MOS 6500-30-168

Condition: good (used), Year of construction: 1996, functionality: fully functional, Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Cutting force 60 kN Weight: approx. 2,800 kg 76 chisel Iodpfx Aoqnvtzsh Noal

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm Iasdpfxovuk Ens Ah Nel hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900CX Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Steuerung: MC5 Ausstattung: 3 St. Kernzug Djbr Rvoxyrc Isf Nysul Isdpfex Tbfuox Ah Njal Schnittstelle Roboter 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 51.000 Betriebsstunden

Condition: new, Year of construction: 2026, faceplate diameter 1000 mm faceplate with 4 clamps: inkl. boring diameter 280 mm weight 419 kg 4-jaw faceplate K72 – Ø 1250 mm Our high-precision 4-jaw faceplate K72 1250 mm was specially developed for the secure and reliable clamping of a wide variety of workpieces on lathes – ideal for asymmetrical, rectangular or difficult-to-position components. Technical features - Diameter: 1250 mm - Design: 4-jaw faceplate, independently adjustable jaws - Material: High-quality cast body for maximum stability and vibration damping - Clamping jaws: Standard with hard clamping jaws Optional clamping claws according to customer requirements (soft, special shape, special size) - T-slot design: for flexible additional clamping forces - High concentricity with heavy workpieces - Suitable for large turning diameters and high clamping forces Mounting & standardisation The K72 faceplate is not standardised as a complete faceplate (no uniform DIN or ISO standard for diameter, jaw geometry or hole patterns). However, the machine mounting is based on common standards, e.g.: - DIN 6350 (centring mount) - DIN 55029 (camlock mount, e.g. D11 / D15) = This allows adaptation to almost any machine, either directly or via adapter solutions. Other sizes & designs available on request Ijdpfsx S Rzcsx Ah Njal In addition to the K72 1000 mm, we also offer other large faceplates for heavy-duty and special applications: K72 1250 mm K72 1800 mm K78 1800 mm K78 2000 mm ? Delivery to order ? Customised mounting design ? Clamping claws na

Year of construction: 2002, condition: ready for operation (used), Injection Unit Screw diameter 40 mm This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine. Iedpfxsx D Hxls Ah Nsal Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Iaedpfxox Uqa Dj Ah Nol Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: excellent (used), Year of construction: 2014, clamping force: 2,500 kN, Equipment: documentation/manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 KN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Opening stroke (max.): 630 mm 5. Mould height (min. / max.): 320 / 830 mm Ijdpfoxqhfyjx Ah Nsal Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Injection speed (max.): 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Equipment of the machine:_ 1. BluePower servo pump drive system (energy-efficient servo-hydraulics) 2. Hydraulic core pull 1× on operator side \+ pressure release system 3. 8-fold water battery with magnetic valve shut-off 4. Hot-runner control 4 zones (ZE 88.5404) 5. MC6 control with 19″ Touch TFT screen 6. PV-control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. BluePower energy-saving servo drive system LRX 150 linear robot (payload < 15 kg), incl.: 1. X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm 2. B-servo / C-pneumatic rotation axes 3. Full integration (MC6 control interface) 4. Safety package – fencing, emergency stop, key switch 5. Vacuum circuits × 4 (Venturi) 6. Transport conveyor interface & control circuit 7. CE conformity declaration for integrated system (IMM + Robot) 8. Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Iasdjmkm I Uspfx Ah Nol -Manufacturer: ROM-Boffalora, double-acting hydraulic cylinder, 150 mm stroke -Type: 65 45M 150 FRA S -Piston rod: Ø 45 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 375/100/H160 mm -Weight: 14.8 kg/pc.

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 14,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG technical data robot-system handling type: Linear Iasdjx Rx Dpjpfx Ah Njl manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Ijdpfx Aox Thzpjh Neal Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: excellent (used), clamping force: 1,300 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, injection weight: 289 g, mold height (min.): 300 mm, General Data Model: Krauss Maffei KM 130/750 CX Year of manufacture: 2011 Control system: MC5 Machine weight: 6,200 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m ⚙️ Injection Unit Iaedpfxsx S Hipe Ah Nol Unit: .../750 Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 289.4 g Specific injection pressure: 2,336 bar Screw L/D ratio: 22.4 🔩 Clamping Unit Clamping unit: 130/... Clamping force: 130 t Platen dimensions: 745 × 770 mm Tie bar spacing: 470 × 470 mm Mould height (min.): 300 mm Opening stroke: 600 mm Max. daylight: 900 mm Ejector force: 22.6 kN Ejector stroke: 150 mm 🧰 Additional Equipment - Hydraulic core - Pneumatic valve 4-section rotameters (2 pcs.)

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Isdpox Uqawsfx Ah Nsal Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: refurbished (used), Refurbished. 1 year guarantee. Iedpfsrta Iqex Ah Noal

Condition: used, Krauss Maffei SE502 MC4 sequence controller- removed from KM 18 C3 - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SE502 spare part no.: 5 Iaedpfx Asrr Eh Ajh Nsl Dition: gebraucht

Condition: excellent (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,150 mm, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. robot-system machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG Iasdjx Rx A Sepfx Ah Njl technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Iasdpfx Ahex Tfyie Nol Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Operating hours in automatic mode: 60,000 h Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Injection unit Screw diameter: 80 mm Ijdpfxsx Uqadj Ah Noal Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Net weight with control cabinet: 27,090 kg Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m