Used Felder A 951 for sale (127)

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm Fpodpfx Aljxlt Shjqjg

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3–18 m/min), electronically controlled height and angle adjustment, spindle diameter 30 mm, Centrex access protection for spindle moulder, fence for max. cutter diameter 250 mm, continuously adjustable fine setting for the outfeed side (+35/-10 mm) with digital display, fully position-controlled, adjustable spindle fence with flip-up/down function, 550 mm anodised ALU fence rails with safety rulers, quick-clamping device for fence, 1270 mm pull-out frame with emergency stop, EURO cutter guard, 5.5 kW motor with variable speed control, speed range: 1,500–10,000 rpm, speed range high-speed spindle: 8,000–15,000 rpm, operator panel at eye level with x-motion control, table size: 1160 x 770 mm, table opening: 320 mm, swing-away device for feed on F 900 incl. feed extension. Location: Nattheim Fpsdey H Hf Tepfx Alqjg

Condition: excellent (used), Year of construction: 2023, For sale is a used Felder sliding table panel saw K740S with a cutting width of 1250 mm. The machine is in excellent condition and has been serviced and inspected by our technical staff. (Fully operational) Technical specifications: - Saw blade tiltable 90–45° - Max. saw blade diameter 400 mm / cutting height 140 mm - Sliding table length 3700 mm - Outrigger table with mitre fence 2600 mm - Manual height and tilt adjustment - Cutting width 1250 mm with parallel rip fence and fine adjustment - Overhead guard (can be swung away) Fpedjy Evxajpfx Alqog - 10 HP (7.35 kW) motor - 425.04.424.23 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, sliding table Reference: R-K09353

Condition: excellent (used), Year of construction: 2021, Sawblade tiltable 45 ° Length of the rolling table ~ 1.400 mm Fjdpfx Aljy Erygoqjpg cutting width ~ 840 mm Motor output 7,3 kW Cutting height ~ 100 mm weight of the machine ca. ~ 500 kg Bench space and sliding table saw Felder type K 700 for precise longitudinal, cross and format cutting of solid wood, panel materials and similar materials. The machine combines the advantages of a compact bench saw with a sliding table and is ideal for joineries, furniture construction and interior fittings. It has a tilting saw blade and is equipped with a digital rip fence.

Condition: excellent (used), Year of construction: 2009, For sale is a FELDER wide belt sanding machine FS 722 with a sanding table size of 2200 x 800 mm. The machine is in very good condition and has been serviced and inspected by our specialized staff (fully functional). Technical data: - Sanding table size: 2200 x 800 mm - Height adjustment via hand crank - Offset machine frame - Sanding belt size: 5750 x 150 mm Fodpey Emy Isfx Alqopg - Extraction connection: 160 mm - 4 HP (3 kW) motor, 400 volts - Machine can be disassembled! Shipping not possible! The machine is located in A-8561 Söding and can be inspected and picked up at any time during our opening hours. Subject to prior sale. Related terms: sander, wide belt, surface processing Reference: R-Z1314

Condition: excellent (used), Felder RL 200 extraction unit max. capacity: 4000 m3/h extraction nozzle: 200 mm Fodoy Ia Auspfx Alqopg Automatic cleaning motor: 4 kW very good condition

Condition: excellent (used), Catalogue number 7963 TECHNICAL DATA Equipment: - disc - heating strip - guillotine - glue tank (granulate) - tape feeder - guillotine - 3 pressure rollers - finishing unit with saw blades - 2 milling units for edge profiling (radius cutters) - scrapers – for removing excess glue - 2 polishers - workpiece thickness 10-60mm - edge band thickness 0.4-5mm - pull-out support table - feed speed 9m/min - total power 5.5kW - extraction port diameter 120mm - dimensions (L/W/H) 3100/1080/1470mm - weight 670kg ADVANTAGES – DTR technical documentation – not repainted – Austrian manufacture Fpsdpfjyzy D Ssx Alqog – year of production: 2010 – perfect condition – used edgebander Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In the case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7945 TECHNICAL DETAILS - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm Fpedpfoywth Nex Alqog - Pneumatic clamps: 2 pcs - Table surface dimensions: 890x380 mm - Height to table surface: 890 mm - Feed cylinder stroke (drilling depth adjustment): 70 mm - Drilling speed adjustable pneumatically - Drilling angle adjustable pneumatically - Main motor: 1.5 kW - Side fences and stop: 1500 mm - Compressed air requirement: 6-8 bar - Dimensions (L/W/H): 1000x1540x1340 mm – weight: 282 kg ADVANTAGES – Austrian-made – 21 spindles – quick-change drill chuck system – Drilling vertically, horizontally, and at an angle – unpainted – Used drilling machine in very good condition Net price: 11,900 PLN Net price: 2,830 EUR based on an exchange rate of 4.2 EUR (Prices may change with larger exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 45 °, rip fence adjustment: manual, actuation type: manual, rotational speed (max.): 7,800 rpm, rotational speed (min.): 3,700 rpm, Felder spindle moulder F-38, year 1994, with Felder power feeder F38, year 2020 3 kW motor Height adjustment via handwheel Tilt adjustment via handwheel Fpedpfey Hmbnsx Alqsg Maximum tool diameter 220 mm Left/right rotation 3 speeds 37 Sliding table with table extension and cross fence Additional moulder hood for tools up to 300 mm diameter Speed adjustment by shifting the flat belt with quick-release fastener Inspection and test run possible and encouraged at any time Also available on Sundays or in the evenings Loading by forklift

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, – Austrian production – year of production: 2005 – X-Roll carriage guide system – Operation manual DTR and CE TECHNICAL SPECIFICATIONS: – Carriage length: 2800 mm – Cutting width (right side): 1250 mm – Main blade diameter: max. 315 mm – Scoring unit diameter: 100 mm – Main motor: 4 kW – Scoring motor: 0.75 kW – Brake – X-Roll carriage guide system – Cutting height adjustment – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm – Option for installing milling cutter, thickness: 6 - 20 mm Fedpfxoy Awwle Alqjpg – Max. diameter: 180 mm – Pawl – Moving guard – Dimensions (L/W/H): 300 / 195 / 170 cm – Weight: approx. 700 kg

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: Fpsdjyq Sztjpfx Alqog X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: good (used), functionality: fully functional, Equipment: CE marking, Simple operation Tilting spindle up to 45° Fodpfxoy Ecyws Alqepg Table length approx. 1,300 mm (with table extensions) Outrigger table and fence ruler Spindle diameter Ø 30 mm Spindle with left and right rotation Speeds 3,000, 4,500, 6,000, 9,000 rpm Incl. Wegoma 4-roller variable feed Incl. Suva profile guard device Weight approx. 900 kg Motor power 7.35 kW

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press Fpodewa Rlkepfx Alqjg FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: like new (used), Year of construction: 2024, Felder Edge Sander FS 700 K Oscillating sanding belt Technical specifications Dimensions [mm]: 1875 x 776 x 1437 Fpodpfx Aljy Amv Reqjg Working height [mm]: 895 - 1024 Frequency [Hz]: 50 Weight [kg]: 295 Power [kW]: 3 Tilt angle [°]: 0-45 Sanding belt dimensions [mm]: 3000 x 200 Sanding belt speed [m/s]: 19 Voltage [V]: 3 x 400 Year of manufacture: 2024 Condition: very good Price

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 320.08.001.18, functionality: fully functional, power: 27.5 kW (37.39 HP), input voltage: 400 V, input current: 60 A, input frequency: 50 Hz, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,200 mm, number of slots in tool magazine: 10, total width: 2,500 mm, table width: 2,300 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Woodworking Centre Felder CNC Profit H10 22.32. Year of manufacture: 2018 12 kW milling spindle Drilling head with 16 vertical spindles, 4 horizontal spindles, 2 grooving saws in X and Y 10 tool holders on the machine frame for HSK F63 Matrix table with 2 rows of stops and continuous guide rail Working area approx. 2.20 m x 3.20 m Automatic central lubrication Mobile operator terminal with mouse and keyboard Automatic tool length measurement system UPS uninterrupted power supply Discharge unit including motorised height adjustment and table extraction system Loading unit with lifting table on the infeed side Belt conveyor on the outfeed side including under-table extraction 500 m³/h vacuum capacity Preparation for interpolating C axis Fsdpfoy Almzjx Alqepg TPA WoodFlash software Chip and dust extraction system, Felder, type RL300, including piping

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Technical Data Fedpfx Asy Agp Dolqjpg Dimensions [mm]: 1660 x 1020 Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.-

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Edgebanding machine with jointer and corner rounding unit Very well-equipped and hardly used edgebanding machine in robust construction, ideal for precise and efficient edge processing in woodworking trades. Equipment: • Jointer unit with 2 counter-rotating diamond cutters • Edge feed for coil and strip material • Glue unit with glue roller • Pre-end trimming unit (roller) • Pressure unit for optimal pressing • End trimming unit with pulling trimming cut • Flush and radius milling unit • Corner rounding unit for end edges • Radius scraper unit • Surface scraper • Polishing unit • Manual unit adjustment • Control panel with LCD display and keypad • Extendable workpiece support Technical data: • Edge thickness: 0.4 – 5 mm • Workpiece height: 8 – 60 mm • Min. workpiece width: 70 mm • Min. workpiece length: 140 mm • Feed speed: 11 m/min • Extraction port: 120 + 2 × 80 mm • Weight: approx. 990 kg • Approx. dimensions (L × W × H): 4550 × 1550 × 1100 mm Fpjdpfx Alsyx Ew Esqog

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, total length: 3,350 mm, total width: 1,510 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm Fpedpfx Ajtp T Dtelqsg * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: like new (used), Pre-milling unit Glue station for granulate 2 pressure rollers End trimming unit with two saw blades Radius milling unit Pull-out support from the table Year of manufacture: 2019 Fedoyzqhhjpfx Alqspg Machine length: 2.7 m 400V 7 kW CE marking

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 425.10.047.22, functionality: fully functional, We offer this Felder K700 panel saw in like-new condition, year of manufacture 2022. Manufacturer: Felder Model: K700 Year of manufacture: 2022 Condition: like new Fpedeyzfglopfx Alqog X-Roll sliding table Scoring unit If you have any questions or require additional information, please contact us by message or phone.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 305.12.001.24, functionality: fully functional, operating hours: 282 h, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,630 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 85 mm, number of axes: 3, number of slots in tool magazine: 8, actuation type: electric, total length: 3,260 mm, total width: 1,630 mm, table length: 2,500 mm, table width: 1,250 mm, Equipment: CE marking, For sale: CNC machining center PROFIT H08 13.25, year 2024 Technical data: Axis travel: X = 3260 mm Y = 1630 mm Z = 225 mm Working area: X = 2500 mm Y = 1250 mm Z = 85 mm Equipment: Matrix worktable Stops around the working area Guide system in X, Y, and Z axes Automatic central lubrication Fpsdeyzfaxspfx Alqog High-performance vacuum system (180 m³/h) 10 kW HSK F63 electrospindle DH8 drilling head 8-position tool magazine (side-mounted on the machine frame) Control terminal for machine operation Electrical control cabinet CE-compliant safety system I can send a video of the machine in operation. Net price – VAT invoice 23%.

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm Fjdpsyzdnbefx Alqspg 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox 4-spindle thickness table guide Fpodpfx Aljyzc Efjqjg Electric thickness table adjustment

Condition: excellent (used), Year of construction: 2001, Felder slot mortising machine FD-250 Motor power: 2.2 kW Year of manufacture: 2001 Height adjustment via handwheel Lever operation 2 manual clamps Fpodpsyvv Ngjfx Alqsg Includes several slot mortising cutters Location: ex stock 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, The used FELDER G 460 is a compact and powerful edge banding machine designed for professional applications in crafts and small-scale industry. It enables precise edging and post-processing of edge materials, impressing with reliable technology, user-friendly operation, and high-quality workmanship results. Machine features: - Glue unit for hot-melt adhesive - End trimming unit (front/rear) - Flush milling unit - Fine milling/radius unit - Combined radius and surface scraper unit Fodpfeyyk Sqjx Alqjpg - Sturdy machine construction Further technical data: - Edge thickness: approx. 0.4 – 3 mm - Workpiece height: approx. 10 – 45 mm