Used Fans for sale (2,496)

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg Ibsdpfszukp Ajx Apcjb

Year of construction: 2006, condition: ready for operation (used), screw diameter: 130 mm, Single-screw extruder manufactured in 2005. This TECNOVA ES130/37D DEG features a screw diameter of Ø 130 mm and an L/D ratio of 37:1. It includes a powerful main motor rated at 246 HP and a degassing system for enhanced processing. The barrel temperature control offers individually controlled heating and cooling zones, ensuring optimal performance. If you are looking to get high-quality plastic processing capabilities, consider the TECNOVA ES130/37D DEG machine we have for sale. Contact us for further details. • L/D ratio: 37:1* • Main motor power: 246 HP (approx. 181 kW) • Degassing system: Yes • Barrel temperature control: Individually controlled heating and cooling zones • Barrel cooling: Forced-air cooling with fans • Barrel heating capacity: approx. 110.6 kW total Ibedpfsz Az Acex Apcjb • Electrical supply: 380 V / 50 Hz / 3-phase • Main electrical rating: 630 A • Control voltage: 110 V • Electrical cabinet protection: IP44 • Extruder length: approx. 4,635 mm Additional equipment • Vacuum pump (included)

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 Isdpfx Apertvi Uocebb TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: E22SI18052669752, This is a combination oven/steamer SCC 202 WE, in an electric version, from the premium manufacturer Rational, manufactured in 2018. The unit has been in operation for 7,679 hours. The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. You will receive an invoice with VAT shown. Ibodpfezkhz Isx Apcob Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Tested & fully functional. Flexible options for shipping or self-collection. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combination oven/steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the unit automatically recognizes the ideal cooking process, the size of the food, the quantity to be cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 1084 x 996 x 1782 mm Minimum door opening dimensions for transport W x H: 1145x1900mm Power connection: V: 400 / kW: 65.5 / Hz: 50/60 Weight: approx. 351 kg Serial number: E22SI18052669752 Year of manufacture: 05/2018 Condition: Used, inspected, and fully functional. Additional information: In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C), and combination (30°C to 300°C). Core temperature probe. Integrated energy optimization. Care Control - self-cleaning. Handheld spray gun with automatic retraction. 8.5-inch color display and touchscreen. 5 fan speeds programmable. Integrated, maintenance-free grease separation system. Automatic start time setting. 7 cleaning levels for unattended cleaning – even overnight. Moisture can be adjusted in 3 levels - from 30°C to 260 °C. 5 programmable fermentation levels. USB interface. Seamless, tub-shaped hygienic cooking chamber, rounded corners. Halogen cooking chamber lighting. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors.

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity Ibjdpjz Ai Tpsfx Apcsb - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Depth: 1.25 m Height: 2.42 m Weight: 1500 kg Stock number: 1143 Ijdpfx Ajzdddyjpcsbb

Year of construction: 2025, condition: new, We offer a professional chiller cooling unit, designed for effective cooling of laboratory and industrial equipment and other systems requiring precise temperature control. Technical specifications: Model: Techjon Power supply: AC 230V ~ 50Hz Input power: 600 W Cooling capacity: 1780 W Refrigerant: R32 Maximum pump pressure: 15 m Net weight: 32 kg Dimensions: 400x380x380mm Connectors: OUT1 / IN1 - cooling circuit OUT2 / IN2 - additional inputs/outputs Alarm and 220V power supply Device features: Modern stainless steel design Intuitive control panel with digital display Built-in fan and water cooling system Ibodpfx Apjwrp Aloceb Reliable operation under continuous load High energy efficiency Mobility - transport wheels and side handles Compact housing - ideal for work in limited spaces Application: Packaging machines Laser device cooling Lines production Industrial machines requiring cooling Precise applications requiring stable temperature: Product available immediately Warranty: 12 months Possibility of issuing a VAT invoice Contact us for more information, photos of the device or to arrange a presentation.

Condition: used, mileage: 42,528 km, power: 75 kW (101.97 HP), first registration: 11/2022, fuel type: diesel, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, XZ1 Model Generation 1, V85 Smokers' package, W65 Tailgate, E07 Hill Start Assist, LA2 Light Assist, EZ8 Parktronic, MJ8 ECO Start-Stop Function, CL4 Multifunction Steering Wheel with Trip Computer, JK3 Instrument Cluster (Pixel Matrix Display), MS1 Cruise Control, F68 Heated and Electrically Adjustable Exterior Mirrors, V30 Side Interior Trim Cargo Area, L16 Halogen Fog Lights, MX0 BlueEFFICIENCY Package, EN6 Audio 10, SA6 Passenger Airbag, E1D Digital Radio (DAB), S04 Adjustable Passenger Seat, SB1 Comfort Driver's Seat, SE5 Lumbar Support Driver's Seat, VV9 Roof Frame Tie-Downs, D50 Full Divider, IL5 Left Hand Drive, RG1 205/65 R16 Tires, RM1 M+S Tires, RR6 Spare Wheel with Jack, RS3 Steel Wheels 6.5 J x 16, F66 Lockable Glove Compartment, H20 Heat-Insulating Glass All Around, LE1 Adaptive Brake Lights, BA3 Active Brake Assist, JW8 Attention Assist, C70 Pedestrian Protection, EY5 Mercedes-Benz Emergency Call System, EL8 2-Way Speakers Front, GE1 6-Speed Manual Transmission TSG 380, KP7 SCR Generation 4 Emissions Control, CF0 Standard Suspension, IB6 Series C447 Vito/V-Class, BB7 CO2-Optimized Brake System, EW6 Digital Extra: Remote Services Plus, E57 Trailer Socket Pre-Wiring, MT6 Emission Class Euro 6d N1, M72 HVO Compatible Vehicle, M60 Alternator 14 V / 250 A, MG9 Generator Management, MK8 Speed Limiter 210 km/h, XG6 2,800 kg Weight Variant, J55 Passenger Seat Belt Warning System, HH9 TEMPMATIC Semi-Automatic Air Conditioning, KB5 Main Fuel Tank 70 Liters, A1O Rear Axle Shaft Brand IFA, V43 Wooden Floor, ZM0 Panel Van, HI1 Climate Zone 1 (Cold/Comfort), LC4 Comfort Roof Control Unit, JH3 Communications Module (LTE) for Digital Services, IK0 Complete Vehicle, LC2 LED Light Strip in Cargo Area, CL1 Height and Reach Adjustable Steering Wheel, XO9 Mercedes-Benz MobiloVan with DSB and GgD, FF1 Center Console with Storage Compartment, XM0 Model Update, FY7 Multi-Button Remote Control, MU0 OM 654 DE 20 LA 75 kW (102 HP) 3800 rpm, EY6 Breakdown Management, Z3R Premium Tire Protection (3 Years), Z3K Pro, E34 Buffer Battery for Starting Process, IN2 Wheelbase 3200 mm, Long Rear Overhang, IL4 Region EU/EFTA, M3E Electric Suction Fan Power Level 5, XU1 Signs / Documentation German, VV0 Weld Nuts in Side Panel for Conversions Notice Ibodpfxjxfwfrs Apceb Despite careful review of all our price listings, errors may still occur. Sometimes these are caused by transmission errors in the systems of various platform providers. But mistakes on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Price labeling also cannot be considered a part of the contract. If you attach particular importance to a specific feature in our listing, please let us know at the time of contract conclusion. We thank you for your understanding!

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230A Dust Collector is a high-performance dust extraction system designed for the efficient removal of sawdust, wood chips, and fine wood dust generated during woodworking operations. This compact and versatile dust collector is ideal for woodworking workshops, production facilities, and home workshops where effective dust extraction is essential for maintaining a clean and safe working environment. The FM230A comes supplied with a 2.5 m flexible Ø100 mm extraction hose, allowing quick and convenient connection to woodworking machines such as planers, table saws, spindle moulders, and thickness planers. The flexible hose enables the dust collector to be positioned wherever needed within the workshop, ensuring efficient extraction directly at the source of dust and chip generation. Its powerful extraction fan delivers an airflow capacity of up to 1,080 m³/h, providing rapid and efficient removal of sawdust and airborne dust particles. A robust steel construction combined with a heavy-duty metal impeller ensures stable operation, long service life, and reliable performance even under intensive daily use. The mobile wheeled base allows easy transportation between workstations, while the dual-bag filtration system effectively separates air from collected waste. As a result, the FM230A helps maintain a cleaner workshop while improving operator safety, visibility, and overall working comfort. Key Features Supplied with a 2.5 m Ø100 mm flexible extraction hose Airflow capacity up to 1,080 m³/h for efficient dust and chip extraction High-performance fan for sawdust, chips, and fine wood dust 0.75 kW single-phase motor (230 V) suitable for standard power outlets Durable metal impeller for long-lasting, reliable operation Mobile design with transport wheels for easy repositioning Efficient dual-bag filtration system Large waste collection bag for extended operating time Compact footprint, ideal for small and medium-sized woodworking workshops Applications The CORMAK FM230A woodworking dust collector is suitable for use with a wide range of woodworking machinery, including: Surface planers and jointers Thickness planers Ijdpeytn Tdofx Apcebb Table saws Spindle moulders Wood sanding machines Its high airflow capacity effectively removes sawdust and wood dust generated during machining, improving workplace visibility while reducing airborne dust levels. Standard Equipment CORMAK FM230A dust collector Ø100 mm flexible extraction hose (2.5 m) Fabric filter bag Waste collection bag Bag retaining clamps Mobile wheeled base Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,080 m³/h Motor speed 2,800 rpm Maximum vacuum pressure 1,000 Pa Noise level 68 dB Number of bags 2 Extraction inlet diameter Ø100 mm Extraction hose length 2.5 m Collection bag capacity 90 L Height 1,800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 230V Dust Extractor with Dust Filter The CORMAK FM300 230V with a dust filter is a highly efficient and mobile dust extractor that combines powerful suction with a modern filtration system. Designed for workshop environments, it is suitable for both professional woodworking facilities and smaller workshops. The use of a 2-micron dust filter makes the machine suitable for applications where clean air is particularly important. Main Advantages of the Machine High extraction capacity – 2,800 m³/h – effective removal of chips, sawdust, and dust from one or two machines simultaneously. 2-micron self-cleaning dust filter – ensures clean air in the workshop and effective retention of fine particles. Stable metal construction – resistant to vibration and mechanical damage. Balanced steel impeller – ensures quiet and vibration-free operation. Compact dimensions and mobility – an ideal solution for workshops with limited space. Quick bag mounting system – convenient and fast replacement of the plastic waste collection bag. Construction and Technology The FM300 230V is equipped with a balanced metal sawdust fan that generates high negative pressure and enables stable operation for many hours. The robust frame made of steel profiles and the solid mobile base ensure structural rigidity and reduce vibration. The suction system is fitted with a Y-shaped connector (2 x Ø100 mm), allowing two machines to be connected simultaneously. The 2-micron dust filter is self-cleaning, which significantly extends its service life and improves filtration efficiency. It is an ideal choice for applications where, in addition to extracting larger waste particles, it is also important to remove fine dust generated during milling and sanding. Precision and Operating Efficiency Operating at a speed of 2,850 rpm, the FM300 230V provides highly effective removal of contaminants, contributing to cleanliness and safety in the working area. Thanks to its 1.5 kW motor and efficient turbine, the extractor maintains consistent suction power even during intensive use. Applications Small and medium-sized woodworking facilities Furniture and model-making workshops Woodworking – saws, jointers, and planers Milling, sanding, and drilling workstations Standard Equipment Metal Y-shaped connector – 2 x 100 mm Metal base with 4 castor wheels Ibedpfsz A T T Djx Apceb Plastic waste collection bag 2-micron self-cleaning dust filter Optional Equipment Ø100 mm extraction hose Galvanized clamps Technical Specifications Specification Value Extraction capacity [m³/h] 2,800 Negative pressure 1,800 Pa Noise level 70 dB Motor speed [rpm] 2,850 Bag capacity [litres] 153 Number of bags 1 Diameter of extraction outlets [mm] 1 x 130, 2 x 100 Dimensions (L x W x H) [mm] 940 x 510 x 1,960 Weight [kg] 64 Motor power [kW] 1.5 Power supply 1-phase, 230 V User and Maintenance Manual (DTR) YES CE Declaration of Conformity YES

Condition: ready for operation (used), Year of construction: 2015, operating hours: 37,083 h, controller manufacturer: FANUC, This 3-axis FANUC ROBODRILL alpha-D21LiA5 was manufactured in 2015. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a weight of 2200 kg and is equipped with a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL alpha-D21LiA5 vertical machining centre we have for sale. Contact us for further details. • Machine weight: 2200 kg • X-Axis: 700 mm • Y-Axis: 400 mm • Z-Axis: 330 mm • Main electronic connection: 200/220 V, 3-phase, 50/60 Hz • Power consumption: 10 kVA • Machine type: CNC Vertical Machining Center • Year: 2015 • Made in: Japan • Serial number: P157YH978 • Tool measurement: Blum laser tool measurement system with A2 reference Ijdpoz Akuuofx Apcebb • Workpiece measurement: Renishaw OMP probe

Condition: ready for operation (used), Year of construction: 2021, overall weight: 2,850 kg, load capacity: 700 kg, arm reach: 3,149 mm, controller manufacturer: FANUC, controller model: System R-30iB / R-30iB Plus, number of axes: 4, This 4-axis FANUC M-410iC/315 was manufactured in 2021. It features a maximum reach of 3,149 mm and a payload capacity ranging from 185 kg to 700 kg, depending on the variant. This robot arm is designed for palletizing and material handling applications. If you are looking to get high-quality automation capabilities, consider the FANUC M-410iC/315 robot arm we have for sale. Contact us for further details. Ibjdpfx Aez A Uc Tepceb • Payload capacity: 185–700 kg (variant dependent: 185/315/500/700 kg) • Maximum reach: 3,143–3,149 mm • Axes: 4 (J1, J2, J3, J4) • Axis ranges and speeds: • J1: ±360°, 60–120°/s • J2: +144°, -0°, 60–120°/s • J3: +12°, -136°, 60–120°/s • J4: ±540°, 120–280°/s • Repeatability: ±0.05–±0.5 mm • Mechanical weight (robot): approx. 1,080–2,850 kg (depending on variant) • Controller weight: 140 kg • Controller power input: 380–415 / 440–480 VAC, 3-phase, 50/60 Hz • Apparent power: 10.5 kVA • Mounting position: Floor • Ingress protection: IP67 wrist; IP54 body (IP65 option available)

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler Isdpfx Asim I Ruopcobb MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Year of construction: 2019, condition: excellent (used), input voltage: 400 V, machine/vehicle number: 3365, BVL Yukon DAK-2 BL 500/400/4000, year of manufacture 2019, machine no. 3365. Two-track continuous washing system for aqueous cleaning and degreasing of shafts, followed by drying. The two washing tracks are separated by a partition and each has its own washing tank. The parts are cleaned on each track and then blown off/dried. The system was designed for integration into a production line with an on-site pallet conveying system. Technical data: - Two washing tanks, each with a capacity of 1,000 liters - Electric tank heater: 2 x 45 kW - Documented washing temperature range: 45-60 °C - Washing pumps: 2 x 4.0 kW; spray pressure 3.0 bar each - Coarse filter: 1 mm; bag filter: 50 µm per washing circuit - Usable length: 250 mm; usable width: 2 x 250 mm; usable height: 400 mm - Control system: Siemens SIMATIC S7-1500, CPU 1513-1 PN - Operator panel: Siemens TP700 Comfort - Operating voltage: 3 x 400 V, N+PE, 50 Hz Equipment: - Unheated drying with side-channel blower and blow-off fan per track - Automatic cleaner dosing and concentration monitoring via Libelle Cleaner Control - Condenser - Automatic cleaning of the blow-off zone - Nozzle system with quick-release fittings - Four viewing windows with internal lighting - Control panel on the support arm system Transport/installation dimensions according to the layout plan: 4,000 x 2,000 x 2,938 mm (L x W x H). Technical documentation available, including operating manual, layout plan, electrical and pneumatic diagrams, maintenance documents, spare parts lists and PLC project archive. Location: Waldmohr. Condition: very good (used). Price on request. Internal reference: 781461. Isdpfsz A Eidsx Apcjbb Technical data according to available manufacturer documentation.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,089 h, This 5-axis FANUC ROBOCUT alpha-1iD was manufactured in 2007. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, allowing for precise machining. The machine can handle a maximum workpiece weight of 1000 kg. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha-1iD machine we have for sale. Contact us for further details. • Machine weight: 3000 kg • Number of Axes: 5 • X-Axis: 600 mm • Y-Axis: 400 mm • Z-Axis: 310 mm • U-Axis: 200 mm • V-Axis: 200 mm • Table load: 1000 kg Ibodpfxjz Aigvs Apcjb • Main electronic connection: 200/220 V, 3-phase, 50/60 Hz • Machine type: CNC Wire EDM • Year: 2007 • Made in: Japan • Rated power: 13 kVA • Machine connected and available for inspection/testing.

Condition: excellent (used), Year of construction: 2022, operating hours: 54 h, functionality: fully functional, machine/vehicle number: 3W2I324202513, Equipment: charge status display, lighting, ALIEN-X The latest C-arm version introduced to the market in January 2019 (our unit manufactured in 2022). The system is designed to have a working performance similar to an angiography unit or a stationary hemodynamics unit; therefore, it will not be affected by the high temperature of the X-ray unit or other components. The C-arm movement is both motorized and manual. Isocentric active anti-collision system geometry on the FPD and X-ray side. Compact and stable with a perfectly balanced C-arm, which is safe for all movements. Excellent maneuverability thanks to two large anti-static steering wheels. Latest generation start & stop system with excellent ergonomics and easily recognizable (color-coded) steering wheels. Durable cable connections between the C-arm and the trolley, resistant to mechanical damage, special paint for quick cleaning and disinfection. Generator power: 25kW Detector: 3030 X-ray tube: dual focus 0.3-0.5 mm Anode speed: standard and high speed available Control console: no. 2 synchronized ETS15-18 (on the C-arm and on the trolley) ETS15-18: real-time images and reference images displayed C-arm movements: manual – motorized – hybrid C-arm position storage: no. 4 arbitrary positions Anti-collision systems: active systems on both the FPD and X-ray tube side Adjustable monitor: 4K Small-sized trolley: separate from the C-arm Foot pedal New EPB power supply systems X-ray tube Alien X uses the latest generation of X-ray tubes with a titanium, zirconium, and molybdenum (TZM) plate. The advantages compared to using pure molybdenum plates are: better resistance to deformation, higher recrystallization temperature, and higher thermal resistance. Anode capacity 400 kHU 104 kHU/min anode dissipation High anode rotation speed Dual focus 0.3-0.5 mm 1200 W dissipation in the housing WAD + EHC WAD (Water Aided Dissipation): X-ray tube cooling system; through the combination of dielectric oil management within the radiology complex, coolant, and an advanced heat exchanger, there are no fans in the sterile field. EHC (Eurocolumbus Heat Control): real-time control of the heat generated with immediate actions to change frames/s and/or pulses and/or imaging and radiological parameters to ensure optimal system operation and avoid overheating. Manual with motorized drive – HYBRID The Alien X C-arm movement can be done both manually and with a motor; manual movement is easy, and the system can be operated simply and ergonomically thanks to dedicated handles. Hybrid movement allows the combined use of both movements. Motorized horizontal movement is also available as an option. This option is mandatory if the EIC package is required. EPD anti-collision system However, it should not be overlooked that a flat detector must have certain important features, regardless of the technology used, namely: 16-bit DQE ≥ 75% Ibsdpfxsz Dft Ee Apcjb MTF ≥ up to 55%

Condition: used, mileage: 487,792 km, power: 120 kW (163.15 HP), first registration: 11/2012, fuel type: diesel, number of seats: 17, gearing type: automatic, next inspection (TÜV): 12/2025, emission class: euro5, color: white, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle today, subject to final sale, errors, typos, and prior sale: Mercedes Benz Transfer 45 Bus Sprinter 516 CDI (Vehicle No. 451) First registration: November 20, 2012 487,792 km Engine: 2,143 cc 120 kW / 163 hp Euro 5 EEV Permissible total weight: 5,000 kg Unladen weight: 3,045 kg Payload: 1,955 kg TÜV (technical inspection): 12/2025, emissions test: 03/2025 Sprinter 516 CDI 16+1 seats Automatic sliding door on the passenger side with extending step Double-leaf doors at the rear Central locking with remote control Fully automatic transmission 2 x electric windows, mirrors, heated mirrors Microwave Auxiliary heater 2nd fan Front armrests Heated driver's seat Radio/CD Emergency exit, among others, through a roof window Tachograph Tires: 195/75R16, approx. 40% tread Price: €10,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale. Iodjz A I R Ropfx Apcebb

Condition: used, Year of construction: 2005, operating hours: 852 h, Used vehicle Isdpfx Ajz A Nmtjpcobb Vehicle no. 3429 New Holland mobile excavator/excavator, year of manufacture 2005, operating hours: 852, power tilt with Helac hydraulic quick coupler, 1 bucket 144 mm, 1 grapple, full cab with fan, dozer blade 2200 mm. For inquiries, please contact or . Errors and prior sale excepted.

Condition: used, mileage: 50,324 km, power: 235 kW (319.51 HP), first registration: 08/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, ????? ONLY COMPLETE ????? ?????ONLY COMPLETE????? Vehicle No.: 254-26 Mercedes Benz 2632 Actros MP3 6x4 MULTISYSTEM: ROLL-OFF DUMP BED / CRANE / WINTER SERVICE SALT SPREADER Mounting plate SCHMIDT with hydraulic connections * First registration: 08/2013 * Original mileage 50,324 km Ibedpfxoz Dcr So Apcjb * Wheelbase 4,500 mm * Front axle leaf spring suspension * Rear axle air suspension * Tire condition approx. 50-70% * EURO 5 - AdBlue * Reversing camera * Blind spot camera * Automatic transmission * German vehicle Roll-off dump bed: MEILLER RK 2067, built in 2013, max 20,000 kg, 300 bar CRANE / Roll-off container: MGK Type HLK 95a3, year of manufacture 2003, max 9.18 m = 960 kg / at 2.20 m = 4,200 kg Salt spreader / roll-off frame: KÜPPER WEISSER, Type IMSSF E35050DFA, year of manufacture 2015, KUBOTA engine Cover plate for brake discs, axle load front axle 9.0 t, battery 220 Ah, additional compressed air tank, electromagnetic viscous clutch for fan, noise reduction S-package for city use, urea tank (AdBlue): 95 liters, rear axle H 7, 13 t, bevel gear 300, fuel tank: 400 liters, air compressor 2-cylinder, fan high-speed belt drive, auxiliary drive MB 2C, programmable special module, pipe breakage protection brake system, rotating beacon left / right, reversing warning audible (warning signal outside), rear window, circuit breaker, seats in the cab: driver's seat sprung comfort seat, sun visor, cab socket 24V, oil cooler transmission Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2 - line, trailer coupling: towing coupling, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, roof hatch (steel), differential lock rear axle, cab: suspension for bad roads (6.0 Hz), cab: M (medium length), generator 80 A, interior filter: pollen filter, body / superstructure: chassis, model revision from 06/2008, engine 12.0 L - 235 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, disc brake front axle, disc brake rear axle, steel rims 9.00x22.5, Telligent - gear shifting, underrun protection front, preparation CB radio, preparation telephone / fax, front axle angled, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 26.0 t Inspection possible during our opening hours at any time, test drive by appointment! In the case of export sales, a deposit will be retained, which will be refunded after receipt of the certificate of conformity. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information without guarantee - Errors, changes, typing errors and prior sale reserved. Vehicle descriptions are explicitly not guaranteed properties. We refer to our general terms and conditions and ask that you take note of them.

Condition: ready for operation (used), emod 132M / 4T-FOL63S / 4 three-phase motor SN OL 63S / 4 fan SN, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Ibjdpfx Apei D Huaocsb

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Completely Overhauled – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005. This machine will undergo a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good technical and optical condition and will be ready for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Completely Overhauled Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Work Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 will undergo a comprehensive and professional overhaul in our facility. As part of the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally repaired or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire work tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul is completed ## Quality Inspection and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality inspection. This includes, in particular, a detailed erosion test according to the quality and testing requirements of OPS INGERSOLL. This test will verify the relevant machine functions as well as the accuracy and process reliability. Ibsdpfx Aoz Atdrjpcjb ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit will be immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large work area, this machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively overhauled wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability.

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Iedpfx Ajzd Twbjpcobb Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Condition: used, mileage: 15,000 km, power: 251 kW (341.26 HP), first registration: 06/2021, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 6x2, wheelbase: 4,000 mm, fuel: diesel, fuel tank capacity: 340 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: other, total length: 9,600 mm, total width: 2,550 mm, total height: 3,650 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 7,400 kg, loading space volume: 22 m³, Year of construction: 2021, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, soot filter, traction control, = Additional options and accessories = - Third seat - Reversing camera - Adaptive cruise control - Aluminum fuel tank - Cab - Central lubrication system - Extra steering axle - Lane departure warning system Iodjz Dhk Topfx Apcobb - Air suspension - Parabolic suspension - Power take-off (PTO) - Radio/CD player - Diesel particulate filter - Disc brakes - Speed limiter - Stability control = Special features = DAF CF 340 FAN 6x2 VDK P4000 22m³ + CB Dual² + Sulo Id-weighing 136MHz Suitable for containers of: 120 L - 360 MGT - EN 840-1 500 L to 770 L MGB - EN 840-2 1000 L - 1100 L MBG - EN 840-2 770 L - 1100 L MGB - EN 840-3 Wheelbase according to COC: 540 cm Axle 1-2: 400 cm Axle 2-3: 140 cm = More information = Transmission: Allison, 6 gears, Automatic Tire size: 315/80 R22.5 Brakes: disc brakes Front axle: Max. axle load: 8000 kg; Steerable; Tire tread left: 90%; Tire tread right: 90%; Suspension: parabolic suspension Rear axle 1: Double tires; Max. axle load: 12000 kg; Tire tread inside left: 90%; Tire tread outside left: 90%; Tire tread inside right: 90%; Tire tread outside right: 90%; Suspension: air suspension Rear axle 2: Lift axle; Max. axle load: 7400 kg; Steerable; Tire tread left: 90%; Tire tread right: 90%; Suspension: air suspension Pump: Yes Price: On request Registration number: HV1170

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Ibjdpfoz Dhm Usx Apceb

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Isdpezt Dmrofx Apcsbb Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.