Used Facing Slide for sale (8,636)

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Djdox Di Rqjpfx Aiiscp Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1981, Altendorf F 45 panel saw, Dsdpfxjzm S S Ns Aiiscp Year of manufacture: 1981 Machine number: 81-5-37 Motor: 5.5 kW / 400 volts Scoring unit: 0.75 kW Cutting length: 2800 mm Cutting width: 1000 mm Raising/lowering and tilting up to 45° via handwheel Spindle speeds: 3, 4, 5 and 6,000 rpm Max. saw blade diameter: 400 mm Max. cutting height: 130 mm Parallel fence Miter gauge

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 2.21 kW (3.00 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,270 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,700 rpm, total length: 3,200 mm, total width: 5,155 mm, total height: 1,550 mm, overall weight: 691 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Year of manufacture: 2022 9 kW motor Dcsdjy Shx Sepfx Aiisp Scoring unit Panel processing up to 3.2 m length Squaring fence with 2 digital readouts Parallel fence with 1 digital readout Excellent condition

Condition: used, diameter 600 mm Dedpfx Aoy Sunyjiiocp hollow ca. 95 mm chuck width 125 mm weight / kg Face plate four-jaw chuck without chuck jaws Diameter: Ø600mm Chuck width: 125mm Passage: approx. 95 mm

Condition: used, mileage: 593,605 km, power: 405 kW (550.65 HP), first registration: 05/2009, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: beige, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MB Truck CD Radio Dodpezhh A Hefx Aiiocp * PARROT hands-free system * CB radio * On-board computer with multi-function steering wheel * Air conditioning * Auxiliary air conditioning (for when parked) * Auxiliary heater (for when parked) * Cooler box ----* Voith Retarder * Differential lock, rear axle * Hill start assist * TipTronic transmission with pedal ----* Alloy wheels * Sun visor * Rotating beacon lights * Auxiliary headlights * Air horns ----* JOST E1 00 1245 fifth wheel coupling * JSK SL Slider pneumatic sliding mechanism * Rockinger 4040/G150 drawbar coupling * Spare wheel ----* Tire size, front axle: 385/65R22.5 * Tire size, rear axle: 285/80R22.5 * Fuel tank: 380 liters * AdBlue tank: 55 liters * Technical gross vehicle weight: 20500 kg * Unladen weight: 8450 kg * Permissible total weight (vehicle and trailer): 87000 kg * Overall length: 6650 mm * Next inspection due: 09.2026 ----Vehicle number: 12235----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services----YOUR VTS TEAM

Condition: excellent (used), Röhm faceplate in very good condition Diameter 450 mm Mounting method – see image Dcsdpfxozhride Aiijp

Condition: used, axle configuration: 2 axles, first registration: 04/2021, loading space length: 7,900 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 11,890 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/55R22.5, tire condition: 70 %, color: white, Equipment: ABS, tail-lift, General Information Year of manufacture: 2021 Axle Configuration Tire size: 385/55R22.5 Tire tread depth: 70% Rear axle 1: Reduction: single reduction Rear axle 2: Reduction: single reduction Weights Unladen weight: 6,960 kg Payload: 23,040 kg GVW: 30,000 kg Functional Features Tail lift: DHOLLANDIA 2000KG Body manufacturer: Burgers Dcsdjy Udprepfx Aiiep Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: used, first registration: 05/2020, Equipment: ABS, 2x fast-acting sliders, sliding roof, SAF Intradisk axles, tires 445/45R19.5, pallet stops on both sides, steel, quick-release mechanism at the front and rear, aluminum air tank, load securing rails along the entire length, vertical load beams, WITHOUT crossbeams, LED lighting, beverage transport certificate, XL. Dcjdpfx Aiez Am Dxeijp

Condition: good (used), Grinding wheel Diameter 500 mm 475 rpm. Dcsdpscx N Atsfx Aiisp

Condition: excellent (used), Year of construction: 1997, Splash guard Diameter 400 mm Dcedpod Tyu Sofx Aiijp Height 100 mm

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 320 mm -Take: Camlock short taper 6 -Hole circle: Ø 133 mm -Through hole: Ø 95 mm Dodpfjgqylxsx Aiiocp -Weight: 40 kg

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, The face turning lathe PORĘBA TR-100C has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm Dsdpfx Aiohyg Iyeiscp - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver Dedpfx Ajhm Uaboiiecp -Type: MS6 -Mount: MK6 / M42, see photos -Total dimensions: Ø 108 x 278 mm -Weight: 7.9 kg

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Front face driver: Mount: MK4 -Front dimension: Ø 32 mm -Dimensions: Ø 55 x 212 mm Dodpfx Asm U A Eijiiecp -Weight: 1.8 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck Dsdpfxodz U S Hj Aiiocp -Chuck size: Ø 367 mm -Thread: M76x6 mm/M91x3 mm -Weight: 31 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck Dcedpsduacajfx Aiiep -Chuck size: Ø 450 mm -Thread mounting type: M76 x 6 mm -Weight: 43 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck Dcjdpfx Aijdu Udnjisp -Chuck size: Ø 490 mm -Short taper mount for: bayonet disc mounting, cone size 8 -Hole circle: Ø 171.4 mm -Weight: 72 kg

Condition: used, Face plate, face plate chuck Dcodpfx Aed A Hpvjiijp -Chuck size: Ø 255 mm -Height: 85 mm -Grooves: 14 mm -Bore center: 75 mm -Weight: 10.8 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck Dcsdpjd Ehfxjfx Aiiep -Chuck size: Ø 450 mm -Short taper: 6 (Ø 106 mm) -Through hole: Ø 80 mm -Weight: 82 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 345 mm -Recording thread pitch: 3.0 mm -Rezess: Ø 65 mm -Weight: 20 kg Dedpfxjd E A Hye Aiiscp

Condition: good (used), Face plate, rotary table, clamping plate -Outer diameter: O 1000 mm -Height: 100 mm -Weight: 574 kg Djdpfxed Ipnds Aiiecp

Condition: used, Face plate, face plate chuck, four-jaw chuck -Manufacturer: FUP -Type: PUUf-M400C6ZJ -Chuck size: Ø 400 mm Dodpjd E Tfljfx Aiiocp -Short taper mount for: bayonet disc -Short taper size: 6 -Short cone diameter: 106.375 mm -Hole circle: Ø 133.4 mm -Number: 2x available -Price: per piece -Weight: 57 kg

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Dsdpfx Aistxirfsijcp

Condition: like new (used), Year of construction: 2023, functionality: fully functional, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, reverse speed: 10 mm/s, ram plate length: 1,000 mm, travel distance X-axis: 1,200 mm, type of input current: AC, pressing force: 40 t, power: 9 kW (12.24 HP), Equipment: safety light barrier, Spotting Press – Manufacturer Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a tool opener/closer and features an extendable table, a rotatable ram, and a large installation height of 1,800 mm. It is particularly suitable for spotting, adjustment, and tryout operations with heated dies. ===== Technical Data + Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Die Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Overall height: approx. 3,800 mm Dodpfotwmp Sjx Aiiecp ==== Working Area - Maximum open height: 1,800 mm - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: according to customer specification ==== Table System - Table extension: 1,200 mm - Table travel speed: 30 mm/s ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning notifications via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components by SICK ==== Equipment - Insulation of the clamping plates (resin insulating plate + ventilation plate) - Custom color design as requested by customer - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, die adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes, heated dies Spotting press, tool tryout press, sliding table press, die opener, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a custom quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all points of the Brazilian national safety regulation NR 12, which is based on these standards. Our core competencies include custom machine building and automation of presses. We supply tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics in our presses primarily feature components from leading European manufacturers.

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Djdpfx Aiou R S Dbeijcp Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -