Used External Cylindrical Grinding for sale (9,793)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 200 kg, grinding length: 1,540 mm, grinding wheel diameter: 500 mm, total width: 2,400 mm, total length: 5,445 mm, total height: 1,580 mm, grinding diameter: 300 mm, workpiece length between centers: 1,623 mm, grinding wheel width: 63 mm, grinding spindle motor power: 5,500 W, overall weight: 4,900 kg, pivoting range: 90 °, rotational speed (min.): 32 rpm, rotational speed (max.): 500 rpm, workpiece spindle speed (max.): 500 rpm, Universal Cylindrical and Internal Grinding Machine E450NP x 1500. Manufacturer: JOTES Łódź – 1995. Nominal grinding length: 1500 mm. Max. workpiece length between centers: 1623 mm. Max. grinding length: 1540 mm. Center height: 150 mm. Center height above floor: 1012 mm. Headstock and tailstock taper: Morse 4. Max. workpiece weight between centers: 200 kg. Max. workpiece weight in chuck: 50 kg. Grinding wheel dimensions: external diameter 500 mm, width 63 mm, bore diameter 203 mm. Manual table traverse: 10 mm/rev. Smallest table increment: 2 mm. Grinding wheelhead swivel: +/- 90°. Spindle speed range: 32–500 rpm. Grinding wheel drive motor power: 5.5 kW. Total power requirement: 12.5 kW. Machine weight: 4900 kg. Dsdjyhcpvopfx Ac Neun Dimensions (L x W x H): 5445 x 2400 x 1580 mm. Equipment (last photo): - 3-jaw self-centering chuck 200 mm, - steady rest 160 mm, - half steady rest, - diamond wheel dresser.

Condition: ready for operation (used), functionality: fully functional, External cylindrical grinding machine Manufacturer: SCHAUDT Max. grinding length: approx. 1000 mm, max. grinding wheel diameter: approx. 600 mm Swiveling grinding spindle unit Equipped with coolant system, machine lamp, and fleece filter unit Duodoyfm S Nepfx Ac Nsn

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table Djdpsrz Nflsfx Ac Neun - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: Duedpfx Asv Hqlroc Non The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: refurbished (used), Year of construction: 2026, Manufacturer: TSCHUDIN Machine type: SL 105U Year of construction: 2024 Duedpfxod Adfuj Ac Nsn Workpiece headstock: MK6 Tailstock: MK4 Center height: 175 mm Center width: 1000 mm Grinding length: 1000 mm Control: Siemens 840D SL Space requirement of the machine: 4920x3400x2300

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: Duedpotrf Smefx Ac Nen - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: used, Year of construction: 1979, Cylindrical Grinding Machine SKF with Internal Grinding Unit Hydraulic Duedpfx Acegt Ea Ro Njn

Condition: good (used), Year of construction: 1990, CNC Cylindrical Grinding Machine Dujdpsid Aphjfx Ac Nen Make: TSCHUDIN Type: HTG 22 - 862 Year 1990 with MARPOSS E14 control and measuring control E5. center width : 650 mm center height : 100 mm grinding length : 620 mm Weight : ca.4 500 Kg. Further data See : TECHNICAL DATA SHEET With many grinding stones and holders Complete machine documentation available. Machine in stock.

Condition: good (used), Year of construction: 1968, Cylindrical grinding machine, manufacturer: STANKOIMPORT, type: XC3, year 1968, with accessories. Model: 3A 161. Centre height: 161 mm, grinding diameter: 322 mm. Centre distance/grinding length: 1000 mm. In good condition. Dedpfjxq Tlrox Ac Neun

Condition: excellent (used), Year of construction: 1998, BUC 630 CNC Year of manufacture: 1998 Distance between centers: 5000 mm Dodjyg I Riopfx Ac Nsun Max. swing diameter: 630 mm Total power requirement: 80 KVA Control: Siemens 840 D Weight: 17,500 kg Dimensions (L x W x H): approx. 14m x 4.4m x 2.9m Accessories: 1 coolant system 2 grinding wheels on flange 750(570)x100x305 1 small manual steady rest: diameter 50 mm – 105 mm 1 large manual steady rest: diameter 105 mm – 250 mm

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 Dedpfx Acolbgfco Neun TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: used, Technical details: grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Djdpfx Ajw Rktbjc Noun Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Dedpfxovygwwj Ac Neun

Condition: new, functionality: fully functional, workpiece weight (max.): 130 kg, center width: 600 mm, grinding wheel diameter: 450 mm, total width: 2,110 mm, total length: 3,120 mm, total height: 1,435 mm, grinding diameter: 350 mm, quill travel distance: 30 mm, grinding wheel width: 50 mm, grinding spindle speed: 2,000 rpm, overall weight: 3,100 kg, Grinding spindle speed: 1500 or 2000 rpm (manual belt change) Travel distance Z-axis: 750 mm Travel distance X-axis: 265 mm Grinding spindle power: 3.7 kW Including the following standard accessories: - Coolant tank 120 liters with 0.4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard - Hydraulic unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange extractor - Dressing holder with diamond dresser mounted on the tailstock - 2 center points - Dial gauge for table alignment at 0° - Machine lamp - 3 detachable lifting hooks for crane transport - Leveling screws with base plates - Machine documentation Including the following special accessories: - Internal grinding device Duodpsc Tnq Iofx Ac Nen - Inverter (Mitsubishi) for speed control of the work spindle - Inverter for speed control of the grinding spindle with 5.5 kW motor, incl. display - 2-axis digital readout Heidenhain ND 780

Condition: excellent (used), Year of construction: 1976, Max. diameter: 560mm Working length: 3550mm Dodpeyghvlsfx Ac Noun Max. workpiece length: 4000mm

Condition: ready for operation (used), Max. diameter: 320mm Max. working length: 1000mm Dedpsyghtdofx Ac Njun

Condition: good (used), Stock number: 3064 Manufacturer: TOS Year of construction: Machine number: 179875 Type / Model: BU 16 Control: conventional Maximum grinding diameter: 160 mm Grinding length: 320 mm Centre height: 125 mm Duedpfoygclzex Ac Njn Clamping range between centres: 250 mm Grinding wheel diameter x width x bore: 300 x 32 x 76 mm Table speed: 0.05 to 7 m/min Table swivel angle: +/- 10° Rotation of grinding spindle headstock: +/- 60° Grinding spindle speed: 2,420 / 3,290 rpm Workpiece spindle speed: 250 to 710 rpm Grinding spindle headstock speed: 2,079 / 2,818 rpm Spindle bore for internal grinding attachment: Cross travel of grinding spindle headstock: 80 mm Connection: 5 kW Accessories/Equipment: Internal grinding attachment Condition: good Weight: 1.5 t Machine dimensions: 1,900 x 1,100 x 1,500 mm Dimensions hydraulic unit: 600 x 800 x 800 mm Dimensions electrical unit: 800 x 600 x 1,400 mm

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Dodpfx Aceycpv Se Noun Grinding Wheel Width: 80-100 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear Axes / Guides X-axis (cross slide): Maximum travel approx. 310 mm X-axis feed rate up to approx. 15,000 mm/min (depending on configuration) Z-axis (longitudinal slide): Maximum travel approx. 850 mm Z-axis feed rate up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g. 12.5 kW in the standard version Standard grinding wheel diameter e.g. Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g. grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Control, standard: e.g. FANUC 31i-A (PC integrated) with StuderWIN operator interface Guideways: Machine bed made from Granitan® S103 (mineral cast) for thermal stability and damping Dodpfxextpnze Ac Noun Dimensions / Electrical Data Machine weight approx. 8,500 kg Power supply, typically 400 V / 50 Hz (country-specific)

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm weight of the machine ca. 3,8 t Djdpeunt Eyofx Ac Nsun dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, many accessories.

Condition: reconditioned (used), functionality: fully functional, center height: 100 mm, workpiece weight (max.): 20 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, distance between centers: 400 mm, year of last overhaul: 2026, CHARACTERISTICS : Centre distance: 400 mm Center height: 100 mm Working feed Z axis: 100 - 3500 mm/min Orientation of table: 0 - 30 ° Grinding spindle motor power: 3 kW Dusdjycim Dopfx Ac Njn Max. diameter grinding wheel: 350 mm Max. grinding wheel width: 30 mm Grinding wheel bore: 127 mm Workpiece spindle nose: W20 Workpiece spindle min. speed: 30 rpm Workpiece spindle max. speed: 1200 rpm Max part weight between centres: 20 Kg Workpiece swiveling range: 0 ° / +90 ° Workpiece spindle power: 0.5 kW Type of attachment tailstock: MT2 Tailstock quill stroke: 20 mm Machine dimensions: 2350 x 1480 mm Weight: 1600 Kg

Condition: used, 1 cylindrical grinding machine Manufacturer: Tschudin Model: HTG 400 Year of manufacture: 1967 Centre distance: 400 mm Centre height: 100 mm Taper: MK4 Spindle speed: Max. table travel: 420 mm Table swivel at 15° Grinding wheel: Ø 300 mm Insertable tailstock MK3 Duodpfx Acoyf Dn Us Nsn

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min Dujdpfjyb S Rcsx Ac Njn cross movement - autom. and by hand 320 mm Control Kelco 80 weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: like new (used), Machine come with lot of additional equipement. Dodpfehvr Hbex Ac Noun

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, grinding wheel width: 150 mm, grinding wheel diameter: 305 mm, year of last overhaul: 2025, Grinding wheel diameter 305x150 mm, workpiece diameter 1-40 mm, machine for plunge and through-feed grinding, PLC control, coolant system, hardened and ground guideways, grinding and regulating spindles with hydraulic slide bearings via three-point bearings, hydraulically adjustable dressers for grinding and regulating wheels, regulating wheel drive adjustable via AC motor, new German-made electrical system with Siemens components, Siemens S7 control system Djdoyfm Rlopfx Ac Noun