Used Ex Press Center for sale (75,661)

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- Fodpfx Aewbvhajb Togk --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 350 mm, travel distance X-axis: 6,500 mm, rapid traverse Z-axis: 350 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,000 rpm, overall weight: 4,500 kg, working range: 6,500 mm, spindle motor power: 7 W, Headline Options: - Boost Your Production with the Refurbished NEXUS REV 8000 4-Axis CNC Machining Center! - Precision & Power: The Ultimate 4-Axis CNC Solution for Aluminum Doors & Windows - Maximize Efficiency: High-Speed, Double-Station CNC Machining Center Key Selling Points (Short & Punchy): - 4-Axis CNC Power: Machine complex profiles from the top and all angles (±90°) with incredible precision. - High-Speed Spindle: 7.5 kW spindle reaching 24,000 rpm for fast, clean cuts even on thick profiles. - Double-Station Design: Two independent 6.5-meter workstations for non-stop productivity—machine one profile while setting up the next. - Exceptional Accuracy: Advanced gantry system with dual servo motors ensures perfect alignment and vibration-free operation. - Smart Tool Management: 8-position automatic tool magazine handles tools from 1 mm up to 300 mm disc cutters. - Plug-and-Play Software: Included UNILINK CAD-CAM software streamlines operation from design (DXF) to finished part with automatic tool and clamp management. - Fully Refurbished & Guaranteed: Completely overhauled by NEXUS TECHNICA experts, backed by a 6-month warranty and full future support. Technical Highlights for the Ad: - Work Envelope (X, Y, Z): 6,500 mm x 350 mm x 350 mm (Double Station) Fgodpfx Abjxfqg Nj Tjk - Spindle: 7.5 kW, 24,000 rpm - Control: Advanced CNC with movable terminal (PC, keyboard, mouse included) - Tool Magazine: 8 positions (handles large disc cutters) - Clamping: 10 manually positioned pneumatic clamps (automatic positioning optional) - Software: UNILINK 3D CAD-CAM software - Condition: Professionally refurbished and modernized Ideal For: - Manufacturers of aluminum windows, doors, and sliding systems - Companies working with long aluminum profiles - Businesses aiming to automate and boost production capacity Call to Action: Ready to revolutionize your profile machining? Contact us today for more information and to arrange a viewing!

Condition: used, VERTICAL CLAMP HYDRAULIC PRESS FOR SOLID WOOD PANELS TRIMWEX - Working dimensions 6100x1300 mm Fsdswr A U Ujpfx Ab Tegk - Working thickness 180 mm - N. 11 vertical cylinders - N. 8 horizontal cylinders

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 500358, turning length: 1,250 mm, turning diameter: 300 mm, spindle motor power: 43 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, INDEX G300L with Promot gantry loader. Machine is still in production and under power. The promot loader has 2 rotary indexing belts with approx. 30 pallet spaces each. The machine is equipped with high-pressure cooling lubricant (40 bar), paper belt filter and tool changer. For further information please contact us by mail. Fsdpfxeu Nmq Ho Ab Tegk

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 510864, turning length: 200 mm, CNC lathe INDEX G200 Overhauled: 2017 Machine number: 510864 max. turning length: 200 mm Bar loading magazine INDEX MBL Main spindle Spindle passage collet clamping: 42mm Spindle diameter in front bearing: 85mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 Max. Nominal turning diameter: 200mm Max. Rotation diameter: 420mm Power Pmax 100%: 7.5/13/20 Torque Mdmax 100%: 35/61/95 Speed: 6300 Counter spindle Spindle passage collet clamping: 42mm Spindle diameter in front bearing: 85mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 Power Pmax 100%: 7.5/13 Torque Mdmax 100%: 35/61 Speed: 6300 Min. distance collet: 15mm Longitudinal travel: 445mm Rapid traverse: 22.5mm Cross slide 1 XZ (top) XZ: 120x400mm Feed force: 5000N Cross slide 2 (bottom) XZ: 105x400mm Fsdpfoulhinjx Ab Tegk Feed force: 5000N Further information on request!

Condition: used, Year of construction: 2000, Name: Used Industrial Filter Press Manufacturer: Simex Sauer Type: SPK 80 Year built: 2000 Construction form: Side beam press Filter pressure: 16 bar Press content: Approx. 1.000 Liters Cycle: Closed Filter area: Approx. 80 m2 Plate size: 800 x 800 mm Number plates: 78 Plate material: Polypropylene Plate transport: Manually Filter cloths: No Filter cloth washer: No Plate pack length: 4.400 mm Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 6.400 x W 1.400 x H 1.500 mm Fgsdpfx Aboxa Dwqe Tek Empty weight: 6.000 kg Technical doc.: No Accessories: A control cabinet & a hydraulic system Condition: Second hand Price: On demand

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, swivel angle B-axis (min.): -100 °, swivel angle B-axis (max.): 100 °, TECHNICAL DETAILS Travel range X/Y/Z: 650 x 550 x 400 mm Travel range B: ±100° Travel range C: infinite Distance 320 mm pallet to spindle nose: 500 mm Distance faceplate to spindle nose: 600 mm MACHINE DETAILS Control cabinet weight: 300 kg Max. workpiece weight: 200 kg Machine dimensions (W x H x D): 2200 x 2830 x 2360 mm Machine weight: 7,000 kg Fsdpfx Abow T Th Te Togk Cooling unit weight (empty): 215 kg Space requirement (L x H x W): approx. 4,000 x 2,900 x 4,900 mm Operating hours: 39,100 h Machine power consumption: 30 kVA Operating voltage: 3x400 VAC - 50 Hz Dust extraction: 2.2 kVA Power consumption cooling unit: 7.7 kVA Total connected load: 39.9 kVA Compressed air according to ISO 8573.1: 7 bar Max. particle size: 1 µm Max. particle concentration: 1 g/m³ Max. pressure dew point: +3°C Max. oil content: 1 mg/m³ Air consumption: 500 l/min Transport and storage temperature: +5°C to +55°C Operating temperature: +18°C to +30°C

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 600 mm, INDEX C65 CNC turning and milling center Fsdpfx Abev Dgpzj Tjgk Control Index C200-4D (Siemens 840d) 3 turrets each with 12 stations VDI-25 with W-toothing, all stations driven C-axis on main and counter spindle Transmit/Transcyl function Index tool breakage monitoring Parts gantry gripper/parts conveyor belt 600L coolant tank with sieve, 8/18 bar Flow-through cooler for coolant Bar passage up to 65mm on main and counter spindle FMB Turbo 10-65, 3-meter bar loader Chip conveyor Machine is cleaned and loaded freely onto a truck

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 1 MAIN SPINDLE - Spindle nose : ISO 702/1-8 - Spindle power : 60 [kW] - Spindle speeds : 3.500 [rpm] - Max. bar diameter : 102 [mm] - Max. diameter on bench : 560 [mm] - Max. chuck diameter : 315 [mm] - C axis indexing precision : 0,001 [°] TAILSTOCK - Tailstock type : Numérique - Type of cone : ISO 30 - Distance between centers : 1.400 [mm] - Adjustable pressure : through effort control TURNING-MILLING SPINDLE - X/Z stroke : 300 x 1.840 [mm] - Y stroke : 286 [mm] - B Axis stroke : 360 [°] - B axis indexing precision : 0,001 [°] - Tool type : HSK63 - Spindle speeds : 12.000 [rpm] - Spindle power : 27,5 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 2 x 40 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 100 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.460 x 2.560 [mm] - Machine height : 3.000 [mm] - Machine weight : 13.500 [kg] MACHINE HOURS - Number of hours under power : 37.800 [h] - Number of turning-milling spindle hours : 7.891 [h] - Spindle hours : 9.137 [h] EQUIPMENT - CNC : C200-4D (SIEMENS 840D Powerline) - Interface : RS232 / RJ45 - Coolant tank : 900 [l] * with high-pressure pump : 25 [bars] * with paper filtering unit - Coolant through spindle - Chips conveyor : KNOLL - Oil mist extractor : BÜCHEL SH2000 PEV Fedpouhalxofx Ab Tjgk - Spindle cooling unit - Rest : SMW SLU3 Ø12-152 à positionnement CNC - Chuck 3 jaws : SMW KNCS-N-315-91 - Number of milling tool holders : 72 - Number of turning tool holders : 12

Condition: good (used), Year of construction: 2011, product width (max.): 1,250 mm, working width: 1,200 mm, 8 color Printing Width (max): 1250 mm Web Width (max): 1200 mm Printing Repeat: from 370 mm to 850 mm Mechanical Speed (max): 300 m/min Substrate Types: plastic films (LDPE, HDPE, PET, BOPP), paper, aluminum foil Unwinder/Rewinder Diameter: up to 1000 mm Inking & Doctor Blade System Drying System Web Guiding and Tension Control Automatic web guide at unwinder Electronic tension control on unwind and rewind units Register Control Fedpfx Asw Adz Rob Togk Automatic longitudinal and transversal register adjustment Job memory for repeat orders Reel Handling Shaftless unwinder and rewinder Integrated lift for easy roll handling Control Panel Centralized touchscreen HMI PLC with diagnostic and job recall functions Suitable for: Flexible packaging (food and non-food) Laminates and labels Film for industrial use Paper and foil printing Material Thickness: 12 – 150 μm

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm table dimension - longitudinal 400 mm Fjdpfxevwgqro Ab Tegk dimensions of the machine ca. 1400 x 1050 x 2350 m

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Fedpfeu T Rgkex Ab Togk

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: div., 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 Fodowpi Rkjpfx Ab Tsgk + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: new, Year of construction: 2025, functionality: fully functional, installation height: 400 mm, throat depth: 230 mm, pressing force: 40 t, table width: 700 mm, table length: 450 mm, stroke length: 250 mm, NEW EXNER C-frame press EEX SLL 40 Standard Line LIGHT Year of manufacture: 2025 Pressing force: 400 kN Installation height: 400/450 mm Stroke: 250 mm Fodpfsw Nx Nhsx Ab Togk Table (width): 700 mm Table (depth): 450 mm Throat depth: 230 mm

Condition: good (used), Year of construction: 1961, machine/vehicle number: 4061, Korrex Berlin No. 1 proof press, working width 50 x 65 cm, machine number 4061, in good condition, available immediately. Fedsvrcxnjpfx Ab Tsgk We have several proof presses in stock from various manufacturers. If you are interested, we would be happy to inform you about other machines we have in our facility. You are welcome to view the machine in our facility by appointment.

Condition: used, Year of construction: 2003, Number of inking units 8 Max. printing width 900 mm Max. material width 950 mm Min. printing length 280 – 650 mm Max. mechanical machine speed 250 m/min Material to print: PE, OPP, Paper Repeat of design, 280 mm - 650 mm printing sleeves for 1.14. plates (more the 150 sleeves) printing sleeves for 2.54 plates (approx 50 cylinders) corona, slit, automatic winders quick sleeve and anilox change system Two edge guides Ink pumps Doctor blade system Fodpjw Hryvjfx Ab Tegk camera system

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration Fodpfxst Hw Dwo Ab Tegk

Year of construction: 1989, condition: ready for operation (used), Drive power: 23kW, pressing force: 800kN, overrun distance: 25mm, overrun time: 93ms, safety distance: 148mm, oil capacity: 650l, weight: approx. 7000kg. Includes a Sick safety light curtain. An on-site inspection is possible. Fgjdpjw Na E Rsfx Ab Tek

Condition: new, Year of construction: 2025, AVEREX HS-540i GTS 2-APC, New Machine Horizontal Machining Center with the option to adapt an optional pallet rotary magazine (6-APC or 8-APC) Standard equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - 15" color LCD display, MANUAL GUIDE i, QWERTY* keyboard - iHMI – Intelligent Human-Machine Interface - Program memory with 2 MB and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with 200-block Look Ahead function - HRV3+ servo drives (digital servo current control) - JERK Control (jerk regulation) - Fine Surface Technology (High-Speed High Quality) - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card (PCMCIA Flash Card) and USB slot - Network interface RJ45, Embedded Ethernet - Enhanced embedded Ethernet - Week timer: Auto. Power On/Off for the machine - High-speed skip function - Tool Offset Memory C - 400 pairs of tool corrections - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100–#199, #500–#999) - Program restart - Helical interpolation - Cylindrical surface interpolation (G07) - Fixed drilling cycles - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring, scaling - Polar coordinate programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional skip blocks, up to 9 - User-defined macro programming Axis Travel - Travels X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0–40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole grid: 5 x 5 M16 x 25 mm deep, 100 mm pitch - Loading capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,100 mm Fgodpfswxdpgsx Ab Tsk - Standard preparation for retrofit of 4-way pallet storage (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (optional SK-40 DIN69871 or HSK-A63) - Number of magazine positions: 80 - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent spaces free: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: Fixed place / random - Speed: 16 s for 80 tools - Tool change time: 0.9 s / 2.1 s (heavy tool) - Chip-to-chip time: 3.0 s / 3.5 s (heavy tool) Spindle Rotary Axis - Manufacturer: PARKSON™ - Axis: full 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screws Coolant, chip, and compressed air management

Condition: used, Year of construction: 1989, functionality: unexamined, machine/vehicle number: 10131, Manufacturer: Maschinenfabrik Exner GmbH & Co. KG Type: EEX 300 SB-ZR Fgodpfowr Um Ajx Ab Tsk Machine No.: 10131 Year of manufacture: 1989 Pressing force: 3,000 kN (300 t) Drive power: 80 kW Overrun distance: 36 mm Overrun time: 103 ms Hydraulic oil capacity: approx. 2,400 liters Total weight: approx. 47 tons Condition: Untested Location: 59227, Ahlen

Year of construction: 1974, condition: used, Pressure: 340 T Length of stroke: 200 mm Down table size: 100x800 mm Distance between up-down: Fgjdpfj Du Uwjx Ab Tjk - open 510mm (daylight) - closed 310mm New hydraulic and electric systems

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: W 115375, We are selling a Conturex 2 C 124 for milling, drilling and profiling work - special window construction machine. Previously used for the production of playground equipment. Workpiece length 250 - 6000 mm Workpiece width 40 x 250 mm Workpiece height 20 - 150 mm 1 x 4-axis main spindle 20 kW; 1 x 5-axis universal spindle 24 kW 2 x 24-position tool changer Axis-controlled part insertion with insertion table Precise workpiece measurement with barcode reader Automatic workpiece transfer from Power-Grip clamp table 1 to clamp table 2 Adjustment speeds: X-axis 110 m/min, Y-axis 120 m/min, Z-axis 60 m/min Automatic outfeed and unloading of workpieces Very well maintained and well cared for machine Fjdpfx Abot Ira As Tegk

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: Fjdpfjwfynfex Ab Togk • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: used, Year of construction: 2006, spindle passage 65 mm spindle diameter in front bearing 110 mm number of spindle speeds 5.000 U/min Power 20/27 KW Control INDEX C 200-4 travel -x axis 850 mm travel -z axis 260 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system. The machine only has 17.000 hours of Power-On. The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. Fgedpjvzcnzefx Ab Tjk - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-160C | V-160 C | V 160 C | V 160C

Condition: used, Year of construction: 2001, workpice diameter max. 90 mm forward bearing diameter 140 mm Turning speeds mainspindle 4.200 U/min Power 35,5 KW Control INDEX C 200-4 travel -x axis 1.500 mm travel -z axis 340 mm travel -y axis 180 mm b-axis 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. Fgedpfevzcnbjx Ab Tjk For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300