Used Ex Fan for sale (57,868)

Condition: used, High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.62 kW -Volume output: approx. 45 m3 / min -Connection air duct: 285 x 140 mm -Number: 2x fans available Iiedpedwlp Tsfx Afish -Price per piece -Dimensions: 390/340 / H340 mm -Weight: 15 kg

Condition: good (used), Extraction fan Ijdpfx Aogmnw Ejfieih Motor: 11kW

Year of construction: 1992, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: approx. 3 kW -Connection input: Ø 230 mm -Connection output: 335 x 290 mm Iedob Rh U Tjpfx Afisih -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Condition: good (used), Extraction fan Motor: 4kW Available extraction capacity: 80m³ / min; 100m³ / min Iodpfxjgmnv Ij Afijih Pipe dimensions: see photos Used, immediately ready for use

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3 kW -Voltage: 380/660 V Iiedpfofdmg Sox Afieh -Speed: 2870 rpm -Volume flow: m³/h -Connection input: Ø 310 mm -Connection output: 400 x 200 mm -Dimensions: 1000/680/H1030 mm -Weight: 254 kg

Condition: used, Extraction fan 2 pieces in stock, Dimensions see photos Ijdegm E E Iepfx Afioih

Condition: used, Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor -Motor power: 0.65 kW Iodocuauyopfx Afieih -Speed: 2840 rpm -max. volume flow: 0.41 m³/h -max. pressure: 804 kp/m² -Connection input: Ø 65 mm -Connection output: Ø 62 mm -Impeller: Ø - mm -Connection: 400 volts -Dimensions: 580/540/H450 mm -Weight: 30 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3.0 kW -Speed: 1420 rpm -Volume flow: m³/h -Pressure: Pa -without: housing -Impeller outside: Ø 430 mm -Impeller inside: Ø 270 mm -Sash: 100 x 180 mm -Sheet metal plate diameter: 650 mm -Sheet metal plate bolt circle: 600 mm -Number: 3x fans available -Price: per piece -Dimensions: 400/650/H650 mm Iisdpfx Aocgan Sefijh -Weight: 52 kg

Year of construction: 2003, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens type 1L4 206-6AA60-Z 200L -Motor power: 18.5 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm Iodpfxed Tir Io Afisih -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 4 kW -Speed: 2850 rpm -Max. Volume flow: 7200 m³/h -Max. Pressure: 120 kp/ m² -Connection input: Ø 450 mm -Connection output: 400 x 400 mm Iiodpfsc Ir Duox Afieh -Impeller Ø: - mm -Dimensions: 1030/930/H1240 mm -Weight: 222 kg

Condition: used, High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan, radial fan -Motor power: 0.139 kW -Speed: 1600 rpm Iijdpfxsfxrghs Afish -Volume output: unknown -Connection air duct: 90 x 90 mm -Price per piece -Quantity: 2 pieces -Dimensions: 280/165 / H230 mm -Weight: 3.1kg / piece

Condition: good (used), Year of construction: 2000, Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, radial fan chip extraction fan type VFM-S -Volume flow: 2400 m³/h -Pressure: 4000 pa -Motor: VEM 5.5 kW 2800 rpm -Connection input: Ø 180 mm Iodpfx Aewnby Iofisih -Connection output: Ø 180 mm -Fan wheel: Ø 500 x 160 mm -Number: 2x fans available, (1x right / 1x left) -Price: per piece -Dimensions total: 830/700/H1110 mm -Weight: 143 kg/piece

Condition: like new (used), Year of construction: 2025, spindle speed (min.): 24,000 rpm, Machine type: CNC Vertical Machining Center Model: Robodrill L with Automation Manufacturer: Fanuc / TS Control: Fanuc Iisdpfsxdvkwjx Afioh Year of manufacture: 2025 Location: Germany for our customers in Baden-Württemberg (BW) TECHNICAL DATA FANUC ROBODRILL Travel X-Y-Z: 700 x 400 x 330 mm Main spindle speed: max. 24,000 rpm Tool holder: BT30 with Big Plus Drive power: 26 kW (1 minute) Tool change time: 1.6 sec. (chip to chip) Connected load: 20 kVA Weight: approx. 2,500 kg TECHNICAL DATA FLEX-ROC CELL Robot: Fanuc M10 ID/L 2 gripper change positions Max. part weight: 8 kg Max. workpiece size: 230 x 150 x 150 mm (adjustments for other sizes possible) Parts conveyor: 1700 x 580 mm Max. number of tools: 64 Connected load: 4.5 kVA Weight: 1,700 kg (Subject to errors in technical data and specifications)

Condition: used, Used machine Technical data: Airflow: 6,400 m³/h Total/static pressure: 2,300 Pa Speed: 2,890 rpm Motor power: 7.5 kW Medium density: 1.2 kg/m³ Isdpfxjxmlw Ss Afisih Availability: short-term Location: Röllbach

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Iedpfsxdfabox Afioih Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Isdpfexbd U Ejx Afieih

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints Iodpfsurt Tlsx Afisih This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: used, functionality: fully functional, type of cooling: air, Original used fans in stock for Carrier 30RB and 30XA. Good condition. Suitable for chiller replacement or upgrade. 📦 Shipping across Europe available. 💨 Original Carrier 30RB / 30XA fans. Iijdpfxexazr Ee Afioh Used fans from Carrier 30RB / 30XA chillers—tested and working, removed after diagnostics. Great for replacing failed components.

Year of construction: 1960, condition: used, centre distance 1200 mm 550 weight of the machine ca. 2,5 t Iodpfsqwpwhex Afieih multifix

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Iijdpfx Afsnxi H Usish Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: used, Year of construction: 1960, functionality: limited functionality, machine/vehicle number: 410/25 1960, EX Cell O GmbH DLZ 400SL 1050 lathe. Iijdjw H Svcspfx Afijh The machine is operational (but has not been used for several years). On-site testing is possible. Shipping available (costs depend on distance in km).

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 95670040, The BM EXTRA machining center is a 5-axis machine, designed and built for processing large-size panels in the construction industry. The machine is fully protected by fixed and movable guards, as well as pressure-sensitive bumpers, ensuring an adequate level of safety. Gantry machining center with 5 dedicated axes and milling motor. Iiodpfx Aow Hxaiofieh

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Iedpst Hw D Dofx Afieih Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 2007, functionality: fully functional, type of cooling: air, Original Fan for YORK Chillers P-32-25 (026-45045-000) | Ø900 mm | 5 Blades | 3~400V Iiedpfx Asw E Dy Ssfieh We offer the original branded YORK P-32-25 fan (part number 026-45045-000) — removed from premium segment equipment. This is not a Chinese replica, but an authentic fan designed for intensive use in cooling and air conditioning systems. Key Features: • Manufacturer: YORK (Johnson Controls) • Model: P-32-25 • Part number: 026-45045-000 • Diameter: 900 mm • Number of blades: 5 • Voltage: 3~400V AC • Year: 2007 • Condition: Used, in working order • Removed from 3 YORK chillers (14 fans per chiller) 📦 Available for individual or set sales. 📍 Located in Poland. Fast shipping within the EU.

Year of construction: 2005, condition: used, tool adaptor 50 mm driven tools 5 Stück Isdpfegtyhrox Afieih 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++