Used Ex Fan for sale (9,085)

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Gjdpfeyrd U Uox Ab Dsit Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Giodpfx Aoiyyndob Djt Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 Godpfx Aeiyynweb Doit 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: excellent (used), mileage: 55,000 km, power: 272 kW (369.82 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 6x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 325 l, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 8,800 mm, total width: 2,550 mm, total height: 3,700 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 10,000 kg, Year of construction: 2023, Equipment: AdBlue, = Additional Options and Accessories = - PTO = Additional Information = General Information Applicable material: Concrete Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Transmission: TraXon, 12-speed, automatic Axle Configuration Front axle: Tire size: 385/65 R22.5; Max. axle load: 10,000 kg; Suspension: leaf suspension Rear axle 1: Tire size: 315/80 R22.5; Max. axle load: 11,500 kg; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 10,000 kg; Suspension: air suspension Weights Unladen weight: 14,500 kg Payload: 17,000 kg Gisdpovyg Nmjfx Ab Djt GVW: 31,500 kg Functional Features High-pressure pump: Yes Water installation: Yes Condition Technical condition: very good Optical condition: very good Further Information Please contact Sjaak van der Wel for more information.

Condition: used, mileage: 310,000 km, power: 188 kW (255.61 HP), first registration: 11/2004, fuel type: diesel, tire size: 315/80R 22.5, axle configuration: 6x2, wheelbase: 5,200 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2004, Equipment: ABS, EBS, air conditioning, central locking, crane, power assisted steering, traction control, = Additional options and accessories = - Reversing camera - Cabin - Central lubrication system - Hydraulic grab arm - Catalytic converter - Air suspension - PTO - PTO - Radio/CD player - Disc brakes - Sun visor = Special features = 0E643868 - HVW1144 Equipped with AE crane weighing system = More information = General information Gedpoyk Uxuofx Ab Deit Application areas: Cleaning and recycling Registration number: hvk114 Transmission Transmission: ALLISON, Automatic Axle configuration Tyre size: 315/80R 22.5 Front axle: Max axle load: 7500 kg; Steered Rear axle 1: Max axle load: 11500 kg Rear axle 2: Max axle load: 7500 kg; Steered Functional Lifting capacity: 19,000 kg Crane: HIAB 195 190 W 3, behind the cab Body make: GEESINK GPM III/1625

Condition: used, mileage: 24,939 km, power: 355 kW (482.67 HP), first registration: 04/2025, fuel type: diesel, next inspection (TÜV): 04/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FAN XF 480 NGD CRYSTAL WHITE Sleeper High Cab Laminated glass with sun protection film Central locking, 3 keys, 2 remote controls Windshield with sun protection film Rear window: Double glazed Horns, 1 set Gedpfx Abswg Npus Djit LED skylights DAF Corner View LED headlights and fog lights Mechanical cab suspension Rear view camera Handle and lamp surround: Black. Side panels: Cab color LED daytime running lights Adjustable short roof spoiler, Sleeper High Cab Black spoiler housing for cab suspension Crystal White CRYSTAL WHITE Lower cab step: Stone Grey Roof hatch with electric controls Integrated parking air conditioner Driver's seat: Luxury Air Passenger seat: Cinema and/or table, fabric upholstery Door panel: Loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Safety net on both bunks Refrigerator and drawer Armrests on both sides of the driver's seat Dashboard design: Plateau Accessory power supply: Standard 2x 40 A ECAS remote control with extended functions Parking heater with waste heat pump and timer Wireless charger Digital tachograph, VDO 1C, version G2V2 Antennas: Radio, 2x mobile radio, GNSS. Extra: CB DAF Infotainment Luxury with Exclusive speakers Adaptive Cruise Control with FCW and AEBS-3 Predictive Cruise Control Driver Performance Assistant Lane Departure Warning System Start-Off Assistant DAF Side and Turn Assist Electronic Stability Control (VSC) Speed Limit Detection DAF Drowsiness Detection Compliant with UN regulations R155 and R156 Alcohol interlock, ready Axle load monitoring Front leaf spring suspension: medium Front: 8.00 t, parabolic, 165 N Rear axle 2, 8000 kg, load index 156 Rear axle load capacity 13.00 t Trailing axle load 8.0 t Load limiter 11.5 t Hand-operated lifting device Lifting device Rear: 20.00 t, air suspension, SR1344 Front axle 1, 8,000 kg, load index 156 Rear axle 1, 11,600 kg, load index 145 Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 2nd driven rear/trailing axle: 385/65R22.5 F1,385/65R22.5GO KMAXS2 160/000 K Steering BBA R1,315/80R22.5GO KMAXD2 156/150 L Traction DCA R2,385/65R22.5GO KMAXS2 160/000 K Steering BBA Tire pressure monitoring system ECO performance Rear axle ratio 2.64 Mechanical differential lock Traction assist 15.0 t 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 MX-13 engine, 355 kW/483 hp Cab emblem: 480 Emission class Euro 6 Maneuvering mode Automated transmission, TraXon, 12 gears Automatic transmission with manual transmission, full version Traction control (ASR) OBD-E Engine H6 Fuel B7 ZF Intarder 2-cylinder compressor without clutch Rear drive axle with disc brakes Pneumatic parking brake control EAS unit right, horizontal, 75 l fuel tank left Longitudinal member 310/7.0 mm, with internal reinforcement front/rear 620 l aluminum fuel tank right, height 620 mm Front underride protection Steel compressed air tank Cross member D137 Rockinger coupling D130 Use with drawbar, type plate, up to max. GVW Pneumatic connection for trailer, swivel coupling Electrical connection for trailer, 24 V/15-pin Plug connection for fixed engine speed control on chassis Hard-wired body signals and warnings ECAS control PTO engine rear, 1 o'clock, control without clutch, pump drive Battery energy monitoring Generator 130 A, batteries 2 x 210 Ah AGM Technically permissible chassis weight max. 27,000 kg Max. gross combination weight of drive train 50,000 kg Class 3 Max. GVW drawbar/coupling 53,000 kg Additional

Condition: good (used), volume flow: 3.69 m³/h, power: 30 kW (40.79 HP), For sale is a tested radial fan from Pollrich, equipped with suction air control and a Siemens electric motor. Technical data: • Manufacturer: Pollrich • Motor: Siemens 30 kW • Airflow: 3.69 m³/s • Pressure: 4800 Pa • Speed: 3277 rpm • Max. speed: 3340 rpm • Medium temperature: up to 60 °C Gedpfxsy El Iwj Ab Deit The blower is mounted on a sturdy base frame and is suitable for industrial extraction, conveying air, or process air applications. Condition: used, tested Voltage: 3 x 400 Volts Speed: 2940 rpm

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. Giedpfjvu Ad Aex Ab Djt The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Precision and Performance The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Standard Equipment powder-coated steel housing 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Adjustable extraction for lathes with a wheeled base, ensuring effective extraction of dust and chips. The set includes a 56-liter chip bag and a 230 x 125 mm connector. The perfect choice for professional turners and hobbyists, ensuring a clean and safe workshop. Giodpsvu Aprjfx Ab Det Product characteristics: The sawdust extractor for wood lathes is a reliable tool that guarantees effective extraction of dust and chips when processing materials. Its main feature is the adjustable nozzle, which allows you to precisely adjust the suction to specific needs and working conditions. This allows you to effectively keep the area around the lathe clean, eliminating potential health and safety hazards. The extractor is equipped with a solid base with wheels, which allows it to be easily moved and placed in different places in the workshop. Regardless of whether the machine is used in a fixed location or requires frequent relocation, the extractor will certainly meet your expectations in terms of mobility and comfort of use. The scope of delivery of the extractor includes a chip bag with a diameter of 380 mm and a length of 530 mm, with a capacity of 56 liters. Thanks to the large capacity of the bag, you can easily work for a long time without having to empty it frequently. Additionally, the set includes an extraction stub with dimensions of 230 mm (length) by 125 mm (height), which ensures reliable and effective connection of the extraction device to the lathe. No matter whether you are a professional turner or a hobbyist, a lathe extraction device with an adjustable spigot and a mobile base will certainly help you keep your workshop clean and ensure safe working conditions. This extract will also work: Planers Planners Thickness gauges Milling machines Banding machines Format saws Technical data ENGINE POWER 0.75kW TENSION 230V / 50Hz WASTE BAG CAPACITY 56 years old SUCCATION PERFORMANCE 1000 m3/h SUCTION PIPE DIAMETER 100 mm FAN DIAMETER 230 mm VACUUM 1030 Pa SOUND PRESSURE LEVEL

Condition: new, functionality: fully functional, Year of construction: 2026, The FM300SN transport fan is a technologically advanced unit designed for extracting sawdust, wood chips, and wood dust in industrial environments. With a 2.2 kW motor and an airflow capacity of 3900 m³/h, the unit performs exceptionally well as a sawdust blower in dust extraction systems, ensuring effective air filtration and purification directly at the source of contamination. Its reliability, high performance, and compatibility with various woodworking machines make it an ideal choice for professional wood processing facilities. Key Advantages 2.2 kW motor – designed for intensive continuous operation High extraction capacity of 3900 m³/h – efficient removal of sawdust, chips, and dust Impeller speed 2950 rpm – optimal airflow with stable operation Universal suction ports – 1 × 150 mm and 3 × 100 mm for connecting multiple machines simultaneously Steel construction – resistant to mechanical damage and adapted for industrial conditions Design and Technology The FM300SN is based on a welded construction made of thick, powder-coated steel, ensuring resistance to impacts, vibration, and heavy-duty use. The aluminum impeller is mounted directly on the motor shaft, providing high efficiency and minimal energy loss. The fan is designed for three-phase 400 V / 50 Hz power supply, ensuring stable operation in industrial facilities without the risk of system overload. The suction port system (3 × 100 mm and 1 × 150 mm) allows multiple machines to be connected simultaneously or enables the use of reducers depending on the dust extraction system requirements. Precision and Performance The FM300SN stands out for its high efficiency in transporting sawdust and dust, even in heavily contaminated environments. Carefully optimized aerodynamic parameters ensure constant airflow, minimizing the risk of blockages within the system. As a result, the fan not only maintains a clean working environment but also extends the service life of connected machines by reducing their exposure to process dust. Applications The FM300SN is designed for environments requiring highly efficient sawdust and chip extraction systems during woodworking operations. It is particularly recommended for: carpentry workshops furniture manufacturing plants production of solid wood panels and components Gedevu Amkepfx Ab Djit central dust extraction systems in production halls Compatible with machines such as: planers and jointers thickness planers spindle moulders sliding table saws edge banders Standard Equipment powder-coated steel housing three-phase 400 V motor aluminum impeller with direct drive suction ports: 1 × 150 mm and 3 × 100 mm Optional Equipment flexible hoses Ø100 mm, Ø120 mm, Ø150 mm filter bags Technical Specifications Parameter Value Motor power 2.2 kW Speed 2950 rpm Extraction capacity 3900 m³/h Inlet diameter 150 mm / 3 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 440 × 430 × 450 mm Weight 30 kg

Condition: new, functionality: fully functional, Year of construction: 2026, A machine ideal both for professional and amateur joiners. The fan optimal output works perfectly with the machines such as: planing machines, surfacers, thicknessing machines, milling machines, scaleboarding machines and dimension saws. Machine characteristics Giedjvu Anuspfx Ab Djt MOTOR POWER 3,8kW REVOUTIONS 2950 rpm SUCTION OFF EFFICIENCY 4860 m3/h SUCTION FERRULE DIAMETER 4x 100 mm /1 x 180 VOLTAGE/FREQUENCY 3/400V

Condition: used, mileage: 504,913 km, power: 355 kW (482.67 HP), first registration: 02/2023, fuel type: diesel, empty load weight: 10,800 kg, maximum load weight: 15,200 kg, overall weight: 26,000 kg, tire size: 315/70 R22,5, axle configuration: 6x2, wheelbase: 5,050 mm, next inspection (TÜV): 12/2026, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, parking heater, trailer coupling, Color: E1980WHTE Crystal White, Bodybuilder: SDG, Unladen weight: 10,800 kg, Permissible total weight: 26,000 kg, Tire size: 315/70 R22.5, 1st axle: , 2nd axle: , 3rd axle: , Fabric seats, air suspension, retarder, digital tachograph: VDO1c G2V2, Trailer coupling: 2x, BDF interchangeable frame: SDG 1120mm / 1320mm / C715-C782, Electronic brake system (EBS), brake assist, Adaptive Cruise Control (ACC) with Predictive Cruise Control (PCC), Air-suspended driver's seat, seat heating, LED headlights, radio, audio interface, sound system, lane departure warning system, power steering, adjustable steering column, electric windows, roof hatch, fog lights, electric exterior mirrors, curb mirror, tire pressure monitoring, central locking, sun visor, steered trailing axle: lift & steerable trailing axle, cool box and refrigerator, axle load display, work lights, ambient lighting, hill start assist, cup holder, cornering light, mirror package, turn assist system, information and service system, upper and lower bed, suspended cab, ex-rental vehicle, vehicle location: 90518 Altdorf near Nuremberg. Errors and changes excepted. Gsdsy Ela Hopfx Ab Djit

Condition: excellent (used), mileage: 529,919 km, power: 309 kW (420.12 HP), first registration: 11/2017, fuel type: diesel, tire size: 315/70-R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, power mirror, soot filter, = Additional Options and Equipment = - Aluminum fuel tank - Front work lights - Heated mirrors - Leaf suspension - Power brake booster - DAB radio - High beam - Low noise - Speed limiter - Air conditioning - Refrigerator - Alloy wheels - Air suspension - Particulate filter - Radio/CD player - Sleeper cab - Lane departure warning system - Stability control - Auxiliary heater (parking heater) - Pre-heating system - Tool box - Power take-off (PTO) = Remarks = Well-maintained 11/2017 MAN TGX 18.420 4x2 with 529,919 km, automatic transmission, Euro 6, air conditioning, refrigerator, 2 beds, ADR (EX/II, EX/III, FL, AT) valid until 21.09.2026, tires 315/70-R22.5 (L: 8mm, 12/13mm; R: 8mm, 10/11mm), chassis number: WMA06XZZ2JM764325, MAN BrakeMatic, German registration with valid main inspection (HU) until 21.09.2026 = Further Information = General Information Usable material: Chemicals Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Axle Configuration Tire size: 315/70-R22.5 Brakes: Disc brakes Front axle: alloy wheels; max. axle load: 7,500 kg; steered; tire tread left: 50%; tire tread right: 50%; suspension: leaf suspension Rear axle: twin tires; alloy wheels; max. axle load: 11,500 kg; tire tread left inner: 80%; tire tread left outer: 75%; tire tread right inner: 65%; tire tread right outer: 60%; suspension: air suspension Weights Curb weight: 7,427 kg Payload: 11,573 kg Gross Vehicle Weight (GVW): 18,000 kg Maintenance, History and Condition APK (technical inspection): valid until 09/2026 Technical condition: very good Visual condition: very good Gedpfx Absyg Exke Djit Further Information Contact Arne Honingh for more information.

Condition: new, Year of construction: 2026, The most powerful centrifugal fan FAN5500 reaches a capacity of up to 8000m3/h. The high vacuum created by the blade system at the right angle and the high motor power can cope with the toughest jobs.Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been created. The design of a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Gijdpsvughlsfx Ab Djt Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 8000 m3/h inlet diameter 300 mm discharge diameter 250 mm ENGINE SPEED 2850 rpm DIMENSIONS 670 x 600 x 600 mm MOTOR POWER / VOLTAGE 5.5 kW/400 V WEIGHT 55 kg

Condition: new, Year of construction: 2026, The most powerful centrifugal fan, the FAN5.5, achieves a capacity of up to 7419 m3/h. The design of the new technology line has enabled us to develop the LineWind metal turbine system. This is the most important feature of the radial fans, enabling them to extract all sorts of pollutants with increased vacuum power, thanks to a special blade system that has been profiled at an appropriate angle. Giodpfx Aevugh Eeb Dot The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of shavings, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 7419 m3/h inlet diameter 300 mm discharge diameter 250 mm PRESSURE 2014 - 1320 Pa DIMENSIONS 750x750x830 mm MOTOR POWER / VOLTAGE 5.5kW WEIGHT 110kg

Condition: new, Year of construction: 2026, The centrifugal fan allows for operation with increased vacuum power to extract various types of pollutants, thanks to a special blade system which has been profiled at an appropriate angle. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Thanks to the many years of experience of our CORMAK team, radial fans of the FAN series were created. Designing a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation Gsdpjvugg Uefx Ab Doit drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 4000 m3/h inlet diameter 200 mm discharge diameter 180 mm ENGINE SPEED 2850 rpm DIMENSIONS 575 x 550 x 500 mm MOTOR POWER / VOLTAGE 2,2 kW / 400 V WEIGHT 35,5 kg

Condition: new, Year of construction: 2026, The fan, created on the basis of a radial impeller blade system, is designed for handling waste generated during wood processing. The high vacuum and high motor power ensure a constant underpressure. Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: - transport of shavings, sawdust, small granules - dusty air - local exhaust Gijdpfx Absvuggbo Dst - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 3000 m3/h INLET DIAMETER 150 mm OUTLET DIAMETER 150 mm ROTATIONS 2850 obr/min DIMENSIONS 575 x 510 x 500 mm MOTOR POWER/VOLTAGE 1,5 kW/400 V WEIGHT 32,5 kg

Condition: new, Year of construction: 2026, Thermal winding protection against overload. The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee stable and vibration-free operation of the unit. The most powerful radial fan FAN11 achieves an output of up to 15445 m3/h. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Gjdpfxsvugfwj Ab Dsit Thanks to its design and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation . The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: Godevuqyropfx Ab Djit - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 7500 m3/h INLET DIAMETER 250 mm OUTLET DIAMETER 250 mm ROTATIONS 2850 obr/min DIMENSIONS 670 x 600 x 600 mm MOTOR POWER/VOLTAGE 4,0 kW/400 V WEIGHT 53 kg

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been developed. The most powerful centrifugal fan FAN7,5 reaches a capacity of up to 10562 m3/h. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Product characteristics: The Radial Fan can transport air whirl sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 10562 m3/h inlet diameter 340 mm outlet diameter 350 mm PRESSURE 2554 - 1673 Pa DIMENSIONS 810x900x980 mm MOTOR POWER / VOLTAGE 7.5 kW WEIGHT 125 kg Gjdpfxevugrdo Ab Doit

Condition: excellent (used), mileage: 234,967 km, power: 55 kW (74.78 HP), first registration: 09/2003, fuel type: diesel, fuel: diesel, color: green, gearing type: mechanical, emission class: euro3, number of seats: 3, Year of construction: 2003, BELGIAN REGISTRATION CERTIFICATE = Additional Information = Gijdpoygdlpsfx Ab Djt Engine displacement: 1,998 cc Unladen weight: 1,895 kg Payload: 1,055 kg Gross vehicle weight: 2,950 kg Technical condition: very good Visual condition: very good For further information, please contact Thierry Leemans.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 Giedjy Aaxrepfx Ab Dot • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, soot filter, Equipment: Giedey Eauxspfx Ab Djt * Air-suspended cab * Sleeper High Cab * Convex main mirrors * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windscreen with sun protection film * Headlamp washer * Headlights with height adjustment * LED skylights * DAF Corner View * LED headlights, cornering and fog lights * Fixed cab entry * Front chassis specification: Floor plate * Reversing camera * Grab handle trim: Black, Side finish: Cab color * LED daytime running lights * Lower cab step: Crystal White * Mirror housing black for cab color Crystal White * Chassis color: Anthracite grey * CRYSTAL WHITE * Headlamp surround color: Crystal White * Bumper color: Crystal White * Roof hatch with electric operation * Integrated stationary air conditioning * Driver’s seat: Luxury Air * Passenger seat: Cinema & table, fabric upholstery * Door trim: Loosely woven fabric * Xtra Comfort mattress for lower bunk * Upper bunk bed * Automatic cab climate control * Safety net on both bunks * Curtains with partition curtain * Fridge and drawer * Armrests on both sides of the driver’s seat * Auxiliary power supply: Standard + 2x 40 A * ECAS remote control with extended functions * Interior trim color: Luxury * Middle storage compartment * Steering wheel with silver accents * Dashboard table * LED interior lighting * Stationary heater with waste heat pump and timer * Wireless charger * Digital tachograph, VDO version G2V2A * Speed limiter setting 90 km/h * PACCAR Connect with navigation * Antennas: Radio, 2x mobile, GNSS Extra: CB * FMS connector, extended and prepared * Infotainment including DAF Truck Navigation * Speakers: Luxury * Adaptive cruise control with FCW and AEBS-3 * Predictive cruise control * Toll preparation * Driver Performance Assistant * Reversing warning system * Lane change warning system * Hill start assist * DAF Side and Turn Assist * Electronic stability control (VSC) * Speed limit recognition * DAF Drowsiness and Distraction Detection * Front axle: 8.0 t, air suspension, 161 N * Rear axle capacity 13.0 t * Tag axle load 8.0 t * Load limiter 11.5 t * Axle load ratio 11.5/7.5 * Manual lift axle control * Lift axle * Rear: 20.0 t, air suspension, SR1344 * Silver-grey wheel trim rings * Goodyear * Tire pressure monitoring system * Steel disc wheels, silver-grey * F1, 315/70R22.5GO EQMSU 158/150 L steering ABA 3P * R1, 315/70R22.5GO EQMDU 154/150 L traction ABB 3P * R2, 315/70R22.5GO EQMSU 158/150 L steering ABA 3P * Urge-to-move * Rear axle ratio 2.38 * Mechanical differential lock * Traction aid 15.0 t * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 * MX-13 engine, 355 kW/483 hp, cab badge: 480 * Emission class Euro 6 * Eco-Fuel * Automated transmission, TraXon, 12 gears * Compressor, 2 cylinders, without clutch * ZF Intarder * Drive rear axle with disc brakes * Pneumatic parking brake control * Wheelbase 4.80 m / rear overhang 2.70 m * Exhaust pipe right * Rear LED lights * EAS unit right, horizontal, + 75-l AdBlue tank left * Longitudinal frame members 310/7.0 mm, with front/rear internal reinforcement * 620-l aluminum fuel tank left, height 620 mm * Single-circuit steering * Steering with Euro certificate * Splash protection * Crossmember D137 + Ringfeder coupling D137 B * Use with drawbar, type plate, up to max. GCW * Pneumatic trailer connection, rotary coupling * Electrical connection

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Each line includes: • Main Extruder: BA105 AMUT, year of manufacture 2004 • Single-screw Co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Raw material pneumatic conveying system • Cooling table with tank (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Discharge table _____ TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 RPM • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Venting: 2.2 kW pump, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted • Screw: Ø1¾", length 21D, compression ratio 2:1, double flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (total 1:25) • Belt type: 3VX600 (4 pcs.) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines are complete and fully operational Ready for profile production using co-extrusion technology Possibility to sell one or both lines, depending on buyer’s requirements Gedpfx Asyc R Aajb Djit On-site inspection available. Documentation and photos provided. It is possible to purchase one line for €80,000.00

Condition: used, mileage: 38,980 km, power: 162 kW (220.26 HP), first registration: 10/2002, fuel type: diesel, empty load weight: 7,720 kg, maximum load weight: 10,280 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,500 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, Equipment: ABS, cruise control, differential lock, low noise, onboard computer, DAF CF220 4X2 hooklift truck (ex-airport vehicle) First registration: 10/2002 only 38,980 KM!!! short cab manual transmission rear axle with air suspension tyres: 295/60 R22.5, tread approx. 70% weight variant: 18,200 kg curb weight: 7,720 kg Hooklift: Leebur HIAB Multilift hook type: LBS 170-475 capacity: 17,000 kg Former vehicle from Amsterdam Airport, Netherlands. One owner from new, in exceptionally well-maintained condition. Export/net price: 28,900 euros All information without guarantee, subject to errors and changes. Gsdey D S Uzjpfx Ab Deit